bbma • Signals are ext,csm,csd and ecsd • Setups are mhv and reentry Straight to the point • However there are several steps to be taken before entering the market. 1. Identify trend 2. Identify selling or buying zone(using bb) 3. Moving averages(using MA) 4. Buyer or seller is more dominant to the market? Choose yr roles! • Are you a scalper? Then you should be using m5,m15 and h1 • Intraday? M15,h1 and h4 • Swinger? H4 and above! Wanfx bbma setups 1. rEentry. 2. Ema50 significant signal. 3. Fake csd. 4. Rejection setup. 5. Hidden entry. rEentry setup • Identify signals in h4 then wait for reentry setup. • Narrow down to lower timeframe to m15(look for ext) as soon as it reach our entry area in h4. • Setup will be valid as long as theres no csm after ext!! rEentry Ema 50 • Look for signals in h4. • Narrow down to m15 and look for csd. • Final step, m5 wait for the ema50 crosses mid bb then look for a pull back or you may put instant order. Fake csd • Any tf break mid bb become csd. • Refer to bigger tf makesure it close and reject MAHI or MALO • Third tf entry (ext/mhv) and cl condition when it become csm. • *in conclusion, the candle breaks mid bb in order to reach mahi or malo in bigger tf. Rejection setup • When the candle rejects any moving averages,bb or ema 50. • Tf h4 and above is much stronger. • Wait for h4 candle to close and narrow down to smaller timeframe *third tf* and look for csd and reentry to confirm the reversal setup. Hidden reentry • You need to understand when low tf breaks mid bb then in higher tf it will try to look for MA. • Lets just say H1 break mid bb – it will reach to h4 mahi/malo. • If the lower time frame rejects mid bb then in higher tf will not look for MA. • Lets say in h1 reject mid bb, in h4 it will not reach mahi/malo. • Only use 2 tf. No matter how good you are! You know all these knowledge, you will still fail if you unable to control your emotions and mindset in trading‐ wan