Professional Documents
Culture Documents
19 Ce 75
19 Ce 75
19 Ce 75
1st Step: After launching ETABS and clicking on “New Model”, Following window
will appear.
Step 4 (c): Add “5000 psi concrete” for both concrete columns and beams.
Step 6: From frame section. Choose “Rectangular section” and Define “Beam and
Columns” according to strength defined in previous step.
19-CE-75 (D)-Assign 01
Step 7: From Section Properties go to Slab Section and Define Slab of 3500psi as
shown below.
19-CE-75 (D)-Assign 01
Step 8: From side bar using the quick draw, “Quick Draw the Columns” as shown:
Step 9: From side bar using the quick draw, “Quick Draw the Beams” as shown:
19-CE-75 (D)-Assign 01
Step 10: From side bar using the quick draw, “Quick Draw the Slab” as shown :
Step 11: From top menu bar, View in 3D so that it be ensure everything is defined
and drawn at each story.