Professional Documents
Culture Documents
Expt. No. 2. Determination of Water Activity Using Pawkit Water Anctivity Meter
Expt. No. 2. Determination of Water Activity Using Pawkit Water Anctivity Meter
Materials required
Procedure
1. Fill the sample (small pieces) into the sample cup up to half of the cup, place the cup on a
flat surface and place the instrument over the sample cup. Press button I to display 0.00
aw on the display screen and leave for 5 min. After 5 min a tick-tick sound will come out
of the instrument (for 5 times) then note the water activity value displayed on the screen.
2. Repeat the measurements for the next samples as in the step 1.
1
Sample port cover
Fig. Pawkit water activity meter Fig. Upside down Pawkit water activity meter
Sensor