Professional Documents
Culture Documents
Pre U - Lox GP
Pre U - Lox GP
Pre U - Lox GP
1. PRODUCT IDENTIFICATION
Product Name PRE U–LOX GP NON-SHRINK, NON-METALLIC CEMENTITIOUS GROUT
Description Non-shrink, non-metallic cementitious grout
Manufacturer Alphatec Chemical Corporation
(under licensed by Taiheiyo Materials Corporation)
ATCP Building, Lot 8 Block 2 Sumulong Highway
Barangay Mambugan, Antipolo City 1870 Philippines
Tel. 63-2-570 0145 / 0917 793 7478 Fax. 63-2-656 0125
Contact Person Rolando M. Romero – Executive Vice President
2. INFORMATION ON COMPONENTS
3. HAZARD IDENTIFICATION
Not combustible, does not pose any danger if used properly
Dry powder may not pose immediate hazard
Exposure to its wet form may cause chemical burn or allergic reaction
Prolonged exposure to wet form may cause itchiness or burning sensation
Eye contact may cause inflammation or may give serious damage such as blindness
Skin contact may cause dry skin or an inflammation
Once ingested may cause throat irritation
None (PRE U – LOX is non-flammable, combustible or fire-inducing material, however, fire-fighters are
advised to wear a self-contained breathing apparatus to limit exposure to burning products.)
Waste materials and its containers must be disposed of in accordance with federal, state and local
environmental control regulations law of the country.
Non-hazardous
Special Safety Measure : Avoid direct sunlight, breaking of bags and contact with water or
moisture upon transport.
The information provided herein is without warranty, expressed or implied by ALPHATEC CHEMICAL CORP.
All testing was conducted at TAIHEIYO MATERIALS CORPORATION, Japan, to which Alphatec Chemical Corp. was
under licensed, and is considered accurate at the time of preparation or prepared from sources believed to be
reliable. It is the responsibility of the user to investigate and understand other pertinent sources of information, to
comply with all the laws and procedures applicable to the safe handling and use of the product.
This product should be used in applications consistent with our product literature.