Professional Documents
Culture Documents
Integrating Tesira AVB Devices Into A Dante System With TC-5D
Integrating Tesira AVB Devices Into A Dante System With TC-5D
with TC-5D
With the TesiraCONNECT TC-5D opening up many possibilities to combine AVB and Dante devices, the Tesira
compiler still favors the native AVB protocol to provide the most cost effective configuration. However, this may not be
desirable when building a primarily Dante-based Tesira system with some Tesira AVB devices mixed in.
Notes
This article explains how to add Tesira AVB devices to a Tesira Dante system, especially when creating a new Tesira
configuration file.
When creating a Tesira configuration file with the above equipment, on compiling the Tesira compiler will suggest an
AVB based solution with the TC-5D providing a Dante interface:
This default result from the compiler is a more cost effective and flexible Tesira solution, but does not match the system
list the user is aiming for.
The following steps explain how to modify the compiler behavior to get the expected output.
Note: All device specific features (For eg. Mute Sync on EX-UBT) on supported Tesira Expanders will work via
this integration
Next proceed to fix the AEC Input block and the Dante Mic blocks to the TesiraFORTÉ VT. This is done by accessing
properties sheet from the right click menu, and under 'DSP Properties', select Unit 1 for 'Allocated to Unit' and select
True for 'Fixed In Unit'.
Compile file
With the Dante Mic block fixed in Unit 1, the compiler is forced to consider a TesiraFORTÉ DAN VT instead of AVB VT,
and provides the desired results as in line with the system list.
Notice that the the Dante Input and Output blocks attached to the EX-UBT are assigned to Unit 2 which is the TC-5D.
The other Dante blocks are assigned to to Unit 1 by the compiler setting up the TC-5D device role as a AVB to Dante
Bridge for the AVB devices to the Tesira Dante system.