Professional Documents
Culture Documents
NCII EIM Questions
NCII EIM Questions
NCII EIM Questions
Explain how grounding system can prevent someone from receiving an electric shock
Grounding system has a lower resistance compared to the body. If there is a ground current,
the current will lead to the lower resistance, thereby preventing someone receiving shock.
Digital meter is more accurate than analog meter due to its electronic components.
Easy to calibrate and it is more reliable.
V – Volt meter
O – Ohm meter
M – milli Ammeter
Video Entry Phone is a communication device which allows the person to identify a visitor
through picture image in a monitor.
Name the 4 major parts of Door access control system?
Door lock
Control system panel
Biometric reader and controller
Exit button
It is the part of Auxiliary system that set motion trigger action individually for each camera.
A diagram that shows the location and actual termination of the auxiliary devices.
Explain why fuses and circuit breakers cannot be used solely to protect against overload?
In a short circuit, the fuse elements burn open in just a fraction of a second. The higher the
values of fault current, the faster the fuse will react. In an overload situation, the fuse
elements can take many seconds or even minutes before thermal actions cause the fuse link
to melt open.
What are the tools and equipment do you need in installing pipe supports and fittings?
Welding Machines
Electric Drill
Electric Grinder
Small Tools (Hack saw, Hammer)
GFCI outlet is use and installed in wet locations, or location that is exposed in water or
wetness.
Identify the basic components of lightning protection system?
Lightning Terminal
Down Conductors
Grounding rod
As a safety measure, why is it not advisable to use water in extinguishing electrical fires?
It is not advisable to use water because water is electrically conductive that may cause
electrocution to the user.
Lock nut
Bushing
Straight Connector
Coupling
Conduit strap
Enclosure simply means that a part where an electronic equipment or device that is
protected such as boxes, cabinet, etc. to prevent electrocution and make contacts to other
components.
Service drop
Service Entrance Conductor
Service equipment
What will you do if the installation manual for installing selector switch is not available?
If you are not familiar with the installation/replacement of the selector switch, do not
attempt to do it.
Bring the matter to your immediate supervisor and ask for assistance.
Power tool.
Metallic conduit, (RMC rigid metal conduit, IMC Intermediate metal conduit, EMT electrical
metallic tubing)
Metallic Flexible Conduit
Non-metallic conduit
Non-metallic flexible conduit
Hard hat
Electrical Gloves
Safety Shoes
Goggles
Apron
To avoid nicking of wires or lessen the strand of wires that may cause wires to heat up.
In standard practices, rubber tape is commonly used insulating barred conductor especially
outdoor installation for the purpose of what?