Professional Documents
Culture Documents
Technical Data Sheet D245S
Technical Data Sheet D245S
blasthole drill
The Sandvik D245S is a diesel powered, self-propelled (bit load 209 kN/47000 lb) makes the machine suitable
crawler mounted blasthole drill for mining. This production to rotary drilling in medium hard rock conditions like
drill comes with a low-pressure power group for rotary those found in coal, copper and gold mines. With optional
drilling. It drills 127 to 203 mm (5" to 8") diameter holes high-pressure air, it becomes exceptionally versatile, for
to depths up to 45 m (148'). Single pass capability is 8,65 both rotary and hammer drilling. The D245S delivers
m (28' 5"). The maximum pulldown of 185 kN/41500 lb the most performance from a compact production drill.
D245S undercarriage
Main rails: Wide flange beam main rails with heavily cross bracing
and reinforced at high stress areas. CAD designed.
Material: WF 14 x 74, ASTM alloy A572, Grade 50 steel
Construction: Electric spray transfer welding method
Jack, mast, deck supports: Welded integrally
Battery box: Lockable door left front corner of frame
Right deck: Non-skid, 609 mm (24") wide
Handrails: 42 x 1067 mm dia. (1-33/50" x 42") high w/kick board
Tow hooks: Welded, 2 front, 2 rear
Leveling Jacks
Number: Three
Cylinder bore: 127 mm (5") diameter
Cylinder rods: 76,2 mm (3") diameter, chrome plated
Cylinder stroke: 1,2 m (48")
Lift capacity each: 218 kN (49087 lbs)
Pad connection: Ball and pinned socket
Pad diameter: 457 mm (18")
Safety check valves: Integral in each cylinder
Extension boot: 168 mm (6.63") diameter x 7,1 mm (9/32") wall
Pad ground clearance: 647 mm (25 1/2") front, 495 mm (19 1/2") rear
when retracted
D245S power group
Engine
Rated horsepower: 354 kW (475 hp) Tier III
Full load rpm: 1800
Starting system: 24 VDC
Alternator: 24 VDC
Safety shut down system: 24 VDC, energize to run
Intake air cleaner:
Type - Dry type with safety element
Rating - 34,0 m3/min (1200 cfm) @ 254 mm (10") of H2O
Batteries: Two size 8D, 12 V, and 1400 CCA
Muffler: Industrial type, 152 mm (6") inlet and outlet
Muffler guard: Perforated steel cover for personnel protection
Engine cooling: Radiator/fan
Standard ambient rating: 54°C (130°F)
Cold weather equipment: Ether injector system
Fuel tank: 757 L (200 gal) mounted between frame beams
Turbo and manifold covers: Sheet metal covers for personnel protection
Mounting to frame: Three-point shock mounting through rubber isolators
Compressor
Type: Oil flooded screw, single stage
Inlet: 25,5 m3/min (900 cfm)
Max operating pressure: 6,9 Bar (100 psi)
Intake air cleaner:
Type - Dry type with safety element
Rating - 34,0 m3/min (1200 cfm) @ 254 mm (10") of H2O
Oil cooling: Thermostatically controlled radiator
Oil separation: Vertical barrier element, pre-separated in 265 L
(70 gal) horizontal sump
Oil filtration: 25 micrometer replaceable element
Drive: Direct to engine flywheel thru soft coupling
Controls: Automatic with safety shutdown system
Air shut off: Hydraulically controlled at panel
Connection to rotary head: 50,8 mm (2") shock mounted steel piping and air hose
D245S mast
Hydraulic oil cooling system: Oil cooler with 60°C (140°F) thermostats
Oil reservoir: 511 L (135 gal) w/sight glass and temperature gauge
Reservoir pressurization: 34,5 kPa (5 psi) air, filtered breather
Pump inlet supercharge: 1,2 MPa (175 psi) for rotation, feed and track
Reservoir refill system: Hand pump thru 10 μm (10 micrometer) in-tank filters
System refill capacity: 700 L (185 gal)
D245S angle drilling (option)
Angle position lock system: Two pins lock drill table to mainframe
Position locking means - Hydraulic actuated from operator’s console
Pin size - 76 mm (3") diameter
Angle range - 0° to 30°
Angle increments - 5°
Pin lock indicators - Light indicator in cab-lock/unlock
Auxiliary pipe support: V-block type
Location - Inside mast
Pipe support bracket - Stationary V for all pipe sizes
Power - Hydraulic cylinder
Adjustable work deck:
Work deck leveling - Adjustable to 30°
Adjustment means - Deck pivots at rear of table
Position locks - Adjustable length chains to table
Table to deck dust seal - Two pieces, 7,87 mm (5/16") rubber compound in
sliding holder under deck
Loader booster cylinder: Additional swing cylinder at top of loader assure thread
alignment (outside loader only)
D245S options
Paint Single paint color other than standard - Orange,Grey & White
Training One week start up - USA/Canada
One week start up - International
Additional day of start up training (12 hr)
Power Group C15 354 kW, 29,7 m3/min / 6,9 Bar (1050/100)@1800 RPM
QSX15 343 kW, 25,4 m3/min / 6,9 Bar (900/100)@1800 RPM
QSX15 343 kW, 29,7 m3/min / 6,9 Bar (1050/100)@1800 RPM
C15 402 kW, 34,6 m3/min / 6,9 Bar (1225/100)@2100 RPM
QSX15 391 kW, 34,6 m3min / 6,9 Bar (1225/100)@2100 RPM
Air volume control for low pressure compressor
C15 354 kW, 25,4 m3/min / 24,1 Bar (900/350)@1800 RPM
C15 402 kW, 28,3 m3/min / 24,1 Bar (1000/350)@1800 RPM
QSX15 343 kW, 25,4 m3/min / 24,1 Bar (900/350)@1800 RPM
QSX15 417 kW, 28,3 m3/min / 24,1 Bar(1000/350)@1800 RPM
C18 469 kW, 32,8 m3/min / 24,1 Bar (1160/350)@1800 RPM
QSX15 447 kW, 32,8 m3/min /24,1 Bar(1160/350)@1800 RPM
Air volume control for high pressure compressor
Service walkway around exhaust and front (cooler) sides
Dust Control Water injection 34 L/min (9 gpm) with 454 L (120 gal) tank
Wtr inj 34 L/min (9 gpm), 871 L (230 gal) (not w/ dry dust)
Sandvik dry dust collector, 85 m3/min (3000 scfm)
Tipton dry dust collector, 130 m3/min (4500 scfm)
Rotary Head Rotary head speed 0-114 RPM, torque 8282 Nm (73300 in-lb)
Rotary head speed 0-138 RPM, torque 6851 Nm (60635 in-lb)
Rotary head speed 0-171 RPM, torque 5536 Nm (49000 in-lb)
Rotary head, dual speed 0-114 RPM and 0-175 RPM
Heavy duty head 5 1/2" API Box for 24,1 Bar (350 psi)
Angle Drilling Angle drilling 0°-30° in 5° increments
Mast Equipment Substitution two pod inside loader, 3 1/2"-5 1/2" pipe, 9,14 m (30')
Added two pod inside loader, 3 1/2"-4 1/2" pipe, 9.14 m (30')
Auto tong group (requires inside loader only)
Pipe thread greaser operated from inside cab
Lubrication Air line lubricator 114 L (30 gal) reservoir
Central lube system, manual via central point
Central lube system, automatic, 19 L (5 gal)
Fluids service center, fill, and hydraulic evacuation
Electrical Battery disconnect system (included in CE group)
24 Volt to 12 Volt converter
Compressed Air Cleaning kit, air gun with 7,6 m (25') hose
Cleaning kit, air gun with 15,2 m (50') hose with reel
Operator’s Cab Drill monitoring system (DMS)
Electronic depth counter (EDC), Imperial
Electronic depth counter (EDC), Metric
Cab sun shades
Window wiper, front, rear, windows, and washers
Extended cab
Cab to deck walkway (not available with extended cab)
D245S options
Dimensions
Length, mast down: 14,2 m (46' 7-1/2") from cab roof to piping support with
rotary head at top of mast
Length, mast up: 9,08 m (29' 9-1/2") from cab roof to attachment at front
of frame
Width, operating: 4,62 m (15' 2") from dust collector cab side walkway
Width, shipping: 3,73 m (12' 3")
Width over track shoes: 3,34 m (10' 11-1/2")
Height, mast down: 4,29 m (14' 1") with work deck removed and
safety hoop in place
Height, mast down: 5,77 m (18' 11") with work deck on
Height, mast up: 14,1 m (46' 3") from ground to piping support with
rotary head at top of mast
Weights