Professional Documents
Culture Documents
Grundfosliterature 6820703
Grundfosliterature 6820703
interface
NB: NB-IoT
CN: Mainland China
CN HK: Hong Kong China Sales region
AS: Other Asian region
2. Product components 2.1.2 Technical data, wireless sensor
Category Property Value
Range of acceleration ±5 g
2.1 Wireless sensor Frequency response 3 Hz - 2 kHz (-3 dB)
Vibration
The wireless sensor is supplied with a lithium thionyl measurement Sensitivity 160 mV/g ± 10%
chloride battery and integrates a temperature-vibration
Axial direction X, Y, Z
measurement module and a communication module.
The sensor supports measurement of temperature and Temperature Measurement range -10 to +110 °C
vibration, and can transmit the measured data to the measurement Accuracy ±3 °C
Cloud platform using NB-IoT communication protocols. Signal types digital, wireless
The product also supports OTA firmware update and Interface types NB-IoT
edge computing features.
Sample interval
30, 60 (default), 90, 120
[minutes]
Output
Transmission interval
30, 60, 90 (default), 120,
for eigenvalues
240
[minutes]
Transmission interval 30, 60, 90, 180, 360,
for waveform [minutes] 720, 1440 (default)
lithium thionyl chloride
Power type batteries (not
chargeable)
TM077748
IP grade IP65
Certification
Explosive-proof grade Ex ia IIC T4 Ga
Others OTA yes
12
26
26
42
48
TM077624
42
TM077744
Use a power cable with an outer diameter of ϕ4-8
mm only.
• RJ45 × 2 (TCP/IP and Modbus TCP)
Communication
The standard version of sensor box includes 4 interface
• RS485 × 2 (GINE and Modbus RTU)
configurable input/output terminals, 2 vibration signal • 4G, WIFI or Ethernet
input terminals, and supports Modbus and GENIBUS • screened, double twisted-pair
protocols. • cross-section: 0.2 - 0.3 mm2
Recommended
For the lite version sensor box, the configurable input/ • AWG: 24 - 20
communication
output terminals are not equipped. cable/CIO cable • maximum cable length: 1200 m
Use a communication cable with an outer diameter
2.2.1 Dimensions of the sensor box of ϕ4-6 mm.
Use a communication cable with an outer diameter
Network cable
of ϕ5.5 - 7.0 mm.
135 87
Number of vibration 2 channels per each of the
signal channels three axes
Type of vibration
acceleration
Vibration sensor supported
acquisition
191
parameters
Sample resolution 24 bit
TM077625
24
42. 5
• Cylindrical: diameter =
Outdoor
35
27-34 mm
14
installation Pillar dimension
requirements • Square: side length =
25 mm 21
Operating temperature -20 to +65℃
Working conditions
Humidity 95% RH 21
.7
38
Power module Input AC 220 V, 10 W
34.65
• IEC: 0.5 - 0.85 mm2
• UL: 20-18 AWG
TM077623
Use a 3-core cable that meets the requirements of
Power supply the National Electric Code. 34.65
cable Use copper or copperclad aluminum conductors
Trademarks displayed in this material, including but not limited to Grundfos, the Grundfos logo and “be think innovate” are registered trademarks owned by The Grundfos Group. All rights reserved.
• cross-section: 0.2 - 0.3 mm2
Recommended Axial direction X, Y, Z
• AWG: 24 - 20
communication
• maximum cable length: 1200 m Operating temperature -20 to +80℃
cable/CIO cable Working conditions
Use a communication cable with an outer diameter Humidity 95% RH
of ϕ4-6 mm.
Weight about 208 g
Use a communication cable with an outer diameter
Network cable Shell material stainless steel
of ϕ5.5 - 7.0 mm. Structure
Connector aviation plug (5 pins)
Number of vibration 2 channels per each of the
signal channels three axes Installation method glue-adhered
Type of vibration Certification IP grade IP65
acceleration
sensor supported
Vibration
acquisition board Sample frequency max. 32 kHz, configurable
2.4 Cloud platform
Sample resolution 24 bit
The Cloud platform is a platform that collects data
Frequency response 3 Hz - 2 kHz
transmitted from IoT sensors and based on Cloud
Acceleration range ±5 g arithmetics, analyses the daily operation status,
Weight about 920 g maintenance conditions, power consumption and other
Others IP class IP65 performance factors of the pumps or other equipments.
OTA yes
Customers can have an easy overview and
management of all the connected pumps from remote
devices, which enables a 7/24 real-time monitoring,
2.3 Wired sensor preventive service and maintenance, and possibilities to
The wired sensors are used to measure the vibration of optimize the performance of the pumps through a data-
the target equipment. Normally, wired sensors are used driven approach.
together with the sensor box. Power is supplied to the
wired sensor via the sensor box, and vibration signals
Kubernetes
are fed to the sensor box by the wired sensor. Device 1
TSDB
GiMC
loTHub Application
Device 2
Users
TM077800
MySQL
Device 3
TM077746
X
92506605 05.2021
ECM: 1314153