Professional Documents
Culture Documents
Design Basis Report - PEB For Ramu Project at Bangalore.
Design Basis Report - PEB For Ramu Project at Bangalore.
Table of Contents:
1.
1. Building Geomentry................................................................................2
2. Applicable Design Codes.......................................................................3
3. Design Loads...........................................................................................3
4. Design Assumptions.................................................................................
Annexure -I
1
Design Information
NOTE:
Above 2.6m brick wall, wall cladding considered alround the building.& above Mezzanine level Also
For Side Wall bracings Tube bracing with Pipe Struts considered.
The Pre Engineered Building has designed according to the Buildings and Design Codes
2
1. “Code of Practice for General Construction in Steel AISC Working Stress Design &
MBMA – 2012.
2. “Code of Practice for design loads” IS: 875 (Part 3 WIND LOAD) – 2015 & MBMA
(Enclosed )”
The main frame rafters are rigidly connected to each other using moment type connection.
For exterior columns, base supports considered as Fix Base
For end wall interior columns and Main frame interior columns base supports considered as
Fix Base.
The lateral stability of the building is provided through the frame action of the main frames.
The longitudinal stability of the building is provided through truss action of braced bays of the
building.
The roof purlins are continuous beams supported at rigid frame locations and span
considered as bay spacing of the building.
The wall girts are continuous beams supported at rigid frame locations and span considered
as bay spacing of the building.
Building enclosed condition: Enclosed.
Sr. Load
Deflection Structural Member Deflection Limitation
No. Combination
3
1 Main Frame Rafters
Deflection
Vertical 2 Roof Purlins
Sr. Load
Deflection Structural Member Deflection Limitation
No. Combination
Deflection
Vertical
Crane Static
Span / 600
Crane Beam
vertical load
Material Specifications:
The following is the list of the material standards and specifications for which the building components have to be
designed:
Material Specifications
Sl.
Materials Specifications Minimum Strength
No.
4
2 Hot Rolled Sections Fy = 250 N/mm2