Professional Documents
Culture Documents
Exhibit 4.2 - UDR - Gas Scrubber Sample
Exhibit 4.2 - UDR - Gas Scrubber Sample
Exhibit 4.2 - UDR - Gas Scrubber Sample
2
SECTION VIII DIVISION I USER´S DESIGN
REV. 0
REQUIREMENTS
(SECCIÓN VIII DIV. 1 REQUISITOS DE DISEÑO DEL USUARIO) Pag. 1 of 2
Project Number:_CPM2301_
Country of Installation: Quito State/Province of Installation: City of Installation: Quito
Owner:_____CONSPECCIME__ Operator:___----____________
Quito
Liquid Level: 16"
Service:_LOW SUCTION SCRUBBER________ Item No.:_______V-2023________________
Specific Gravity: 0.53
Type:
Diameter (in.):________48" OD____________ Length, Tangent-to-Tangent:____12 ft S/S_____
Vertical Horizontal Sphere
Minimum Design Metal Temperature (MDMT) – Case 2 Deg @ Due to: Process Other
-- --- --- Ambient Temperature
Corrosion Allowance: Shell Head Nozzles Jacket Coil Supports Internals Corrosive
Service?
Int. Ext. Int. Ext. Int. Ext. Int. Ext. Int. Ext. Int. Ext. Yes No
Seismic Loading: ASCE 7 Soil Profile Classification: PWHT: Other Loadings per UG-22:
UBC IBC Per Code Temp. Gradients Deflagration
____Site Class: B
Other None Process Required
Diff. Thermal Exp.
Insulated: Yes No Type Thickness Density Coating Specification: None
By Manufacturer By Others External --------- ------- Permitted Prior to Pressure Test
Internal --------- -------
Yes No
Vessel Support: Legs Skirt Lugs Saddles Fireproofing: Type: Rating hr):
Yes No ------------------- -------------
MATERIALS
Component Specification Component Specification
Shell SA-516-70 Ellipsoidal Head SA-516-70
Hemispherical Head -- Torispherical Head -
Toriconical Head -- Conical Head -
Nozzles SA-106-B / SA-105 Flanges SA-105
Stiffener Rings - Pressure Retaining Bolts SA-193-B7 / SA-194-2H
Attachments SA-36 Internals SA-106-B / SA-36
Reinforcing Pads SA-516-70 Other Skirt SA-516-70 / ASTM A-36
NOZZLE SCHEDULE
Description Number Size Flange Class Description Number Size Flange Class
Required Type Required Type
Inlet 1 4 WNRF 150 Inspection - Handhole 2 8 WNRF 150
CPLG
Outlet 1 4 WNRF 150 Pressure Gauge 1 1 NPT 3000
CPLG
Level 2 2 WNRF 150 Temperature Gauge 1 1 NPT 3000
Drain 1 2 WNRF 150 Spare 2 2 WNRF 150
Safety 1 2 WNRF 150
QUALITY CONTROL MANUAL Exhibit 4.2
SECTION VIII DIVISION I USER´S DESIGN
REV. 0
REQUIREMENTS
(SECCIÓN VIII DIV. 1 REQUISITOS DE DISEÑO DEL USUARIO) Pag. 2 of 2
Category A
Type 1 Full - UW-11 (a)
Category B Head-to-Shell
Type 1 SPOT - UW-11(a)(5)(b)
Other: Shell to Shell Type 1 SPOT - UW-11(a)(5)(b)
Category C Body Flanges
- --
Nozzle Flanges Type 1 None UW-11(a )(4)
Category D Type 7
BODY FLANGE REQUIREMENTS
Description Type Facing/Surface Finish Gasket Style Joint Assembly (See ASME
PCC-1)
- - - - -
- - - - -
SKETCH
GENERAL NOTES
Date:
User:_
Signed: ____
(Representative)