Professional Documents
Culture Documents
Qcmechinspec7cv Docs
Qcmechinspec7cv Docs
CAREER SUMMARY
Over 7 years of Experience in Pakistan & Saudi Arabia as a QA/QC (Mechanical/ Piping /
Welding/ Equipment/Structural with a wide range of experience in construction, manufacturing
CONTACT & turnaround/shutdown maintenance activities of the Oil & Gas sectors. Inspection of Static
Equipments, Fabrication, Erection of Piping, Structure, Pipelines & Wellhead Equipments.
Conversant with various phases of inspection as per ITP, QCP, Various Standards for Inspection
muhammadsarmadsohail@gmail.com
and QC Procedures used on Projects. Carry out Intermediate & Final Inspection as per RFI at
+92-313-5447422 multiple stages, Issue & close Punch Points list and handing over to client after final completion
Interpretation of codes standard specifications Recommended Practices, Project Specifications,
House#A-13/3 SectorE-9 Islamabad Pakistan Preparation of MOS, ITP, Procedures, work instructions & Engineering. Able to work on own
initiative and as well as a part of a team.
www.linkedin.com/in/muhammadsarmadsohail
PROFESSIONAL EXPERIENCE
TRAINING/CERTIFICATIONS
Employer : EXPERTISE CONTRACTING CO.
Position : QA/QC Inspector
CSWIP 3.1 Level II Welding Inspector
Duration : April 2023 – July 2023
CSWIP # 698464
TWI Technology Engineering Pvt Ltd. UK Project : Ammonia Line Replacement SAN, RCPC
Client : SAFCO – SABIC Agri Nutrients.
ASNT NDT LEVEL II (LPT, MT, RT & UTG) Employer : EXPERTISE CONTRACTING CO.
MAY 2022 Position : Piping QA/QC Inspector
Acc. To ASNT SNT-TC-1A Duration : Feb 2023 – March 2023
Project : TA-2023 LUBEREF
Fire Prevention & Safety Officer
Client : Saudi Aramco Base Oil Company - LUBEREF Jeddah.
JUN 2016 – JUN 2017
National Institute Of Fire & Tech Islamabad Employer : EXPERTISE CONTRACTING CO.
Position : Piping QA/QC Inspector
ISO 9001:2015 QMS Foundations Duration : Jan 2023 – Feb 2023
SEP– 2021 Project : TA-2023 YANSAB- SABIC Affiliate
The Knights Of Safety Academy Client : Yanbu National Petrochemical Company YANSAB
Employer : EXPERTISE CONTRACTING CO.
ACADEMIC QUALIFICATION Position : Piping QA/QC Inspector
Duration : Dec 2022 – Jan 2023
Bachelor Of Science
Project : TA-2023 FARABI
(B Sc. Physics, Mathematics)
Client : Farabi Petrochemicals Company Yanbu
NOV – 2019
University Of Sargodha - Pakistan Employer : REON Energy Ltd.
Position : QC Inspector Mechanical
HSSC/Intermediate (F .Sc Pre-Engineering) Duration : Feb 2022 – Nov 2022
NOV – 2015 Project : BCL Hattar
Federal Board Of Intermediate & Secondary Client : Bestway Cement Hattar
Education Islamabad- Pakistan
Employer : DESCON Engineering Ltd.
SSC/Matriculation (Science) Position : QC Inspector
APRIL – 2013 Duration : Dec 2021 –Jan 2022
Federal Board Of Intermediate & Secondary Shutdown : NRL TA-21-22
Education Islamabad– Pakistan Client : National Refinery Ltd. Karachi Pakistan.
SHUTDOWN ACTIVITIES:
Pressure Vessels and Tower/ Column Inspection:
Visual Inspection.
Insulation Box opening for CUI and UTG Fastener Check.
Gasket Seating Surface Inspection. Column TRAY Inspection.
Internal Inspection: Pitting, Erosion, Vortex Breaker, Baffle Plate, DemisterPad and nozzles (Inlet and Outlet).
External Inspection: Skirt, Top & Bottom Dish End, Concrete Sprout.
Weld Inspection: DPT on All T-Joints, SWUT Inspection on (CS & LS), MPT For Surfacedefect.
Repair Activities: Major Recommendation like patch plate welding, RF pad replacement.
Hydro test as per Procedure.
Box up
HEAT Exchanger:
Preliminary Inspection: Shell insulation, GA Drawing Study, P & I Drawing study, Insulation Box opening for UTG.
Shell Inspection: Cleaning by water wash cleaning, wire brush cleaning,buffing cleaning, hydro-jetting cleaning inspection.
Visual Inspection-Pitting, weld joints, Nozzle (Inlet & outlet) inspection and NDT activities like UTG, WFMPT and PT.
Tube Bundle Inspection: Tube Straightness ensuring by Torch, BaroscopicInspection, Tube Sheet, Tube End, Baffle plate, Tie Rod,
Impingement plate inspection.
Re-tubing for damage tubes, Seal weld in tube sheet on tube end.
Advance NDT for Tubes like RFET for ferrous tube, ECT for non ferrous tubesand IRIS for higher thickness tubes.
Hydro testing: shell side, tube side and Ring Test.