Professional Documents
Culture Documents
Schott Puravis Datasheet en
Schott Puravis Datasheet en
Technical Data
Numerical Aperture
0.55 0.64 0.86
Theoretical Value at 587 nm
Optical Attenuation at 450 nm ≤ 550 dB/km at 450 nm ≤ 500 dB/km at 550 nm ≤ 500 dB/km
Measured according to DIN 58141 Part 1 with
at 553 nm ≤ 250 dB/km at 553 nm ≤ 280 dB/km at 640 nm ≤ 500 dB/km
a single fiber diameter of 70 μm
(2856 K)
Temperature (CCT)
“A”
Correlated Color
Temperature Stability
Static Applications
-20°C to 200°C / - 4 F to 392 F
(fibers only, may be limited by lubricant, epoxy resins or sheathing materials)
GOF70-50µm GOF70-30µm
70% 70%
Transmission / %
Transmission / %
60% 60%
50% 50%
40% 40%
30% 30%
GOF70-50µm-1m GOF70-30µm-1m
20% 20%
GOF70-50µm-3m GOF70-30µm-3m
10% GOF70-50µm-5m 10% GOF70-30µm-5m
0% 0%
300 500 700 900 1.100 300 500 700 900 1.100
Wavelength / nm Wavelength / nm
GOF85-50µm GOF85-30µm
70% 70%
Transmission / %
Transmission / %
60% 60%
50% 50%
40% 40%
30% 30%
0% 0%
300 500 700 900 1.100 300 500 700 900 1.100
Wavelength / nm Wavelength / nm
Optical Properties of PURAVIS®
GOF120-50 µm GOF120-30µm
Transmission / %
Transmission / %
70% 70%
60%
60%
50%
50%
40%
40%
30%
30%
20% GOF120-50µm-1m
20% GOF120-30µm-1m
GOF120-50µm-3m GOF120-30µm-3m
10% GOF120-50µm-5m 10% GOF120-30µm-5m
0%
300 500 700 900 1.100 0%
300 500 700 900 1.100
Wellenlänge / nm
Wavelength / nm
Transmission Solarization
Transmission of a fiber bundle depends on The intrinsic attenuation of the PURAVIS® core glass
• the intrinsic attenuation of the core glass, materials can increase by induced attenuation due to
• packing fraction of fibers, photo-oxidation and other effects by short wavelength
• core/clad ratio, radiation.
• quality of end surface polish, Degree of Solarization depends on
• Fresnel reflections at the end surfaces and • Wavelength (UV >> 400 nm > 450 nm)
• length of the fiber bundle. • Power density and length
• Coherency (Laser light sources have stronger effects).
The displayed transmission curves represent SCHOTT’s Solarization effects are partly reversible by temperature
typical manufacturing level for fiber bundles with and time.
PURAVIS® fibers with 30 and 50 µm fiber diameter. Depending on intensity levels and respective spectra each
The curves for 50 µm also represent the transmission level light source/fiber set-up must be tested individually.
for 70 µm fibers, due to the same core/clad ratio. Please contact your SCHOTT sales representative for
further details.
Numerical Aperture / Acceptance Angle (Measured according to DIN 58 141 Part 3)
100
100 120
Effektive Acceptance Angle 2α / °
Effektive Acceptance Angle 2α / °
GOF120-
110 30µm-450nm
90 GOF120-
GOF85-50µm- 30µm-546nm
450nm 100 GOF120-
GOF85-50µm- 30µm-630nm
80 546nm GOF85-
90 30µm-450nm
GOF85-50µm-
630nm GOF85-
30µm-546nm
70 GOF70-50µm- 80
450nm GOF85-
30µm-630nm
GOF70-50µm- GOF70-
70
546nm 30µm-450nm
60
GOF70-50µm- GOF70-
630nm 60 30µm-546nm
GOF70-
50 30µm-630nm
50
1,0 2,0 3,0 4,0 5,0 1,0 2,0 3,0 4,0 5,0
Length / m
Length / m
Long Term Stability of PURAVIS® – Chemical Stability
Core and cladding glasses have high chemical resistance classes, Chemical Resistance
GOF70 GOF85 GOF120
which ensure long-term stability over lifetime under repeated Classes
reprocessing cycles. Acid resistance class SR 1.0 1.0 1.2
(acc. to ISO 8424:1996)
Sample Preparation
• Samples: Fiber bundle Ø2,4 mm , length 100 mm, bonded into Alkali resistance class AR 1.0 1.0 1.0
stain-less steel tube (acc. to ISO 10629:1996)
• Prior to each measurement: Cleaning of end surface with with
Climatic resistance class 1.0 1.0 1.0
5% V/V acetic acid
CR (acc. to proposed
• Rel. transmission measured according to DIN 58 141 Part 2;
standard ISO/WD13384)
Aperture of light beam: NA 0.1
Measurement wavelength: λ = 535 nm Stain resistance class: FR 0 0 0
100%
Rel. Trasmission
100%
80% 80%
60% 60%
GOF70 GOF70
40% GOF85 GOF85
40%
GOF120 GOF120
20% 20%
Wavelength = V(λ)-Filter
Wavelength = V(λ)-Filter
0% 0%
0 20 40 60 80 100 0 100 200 300 400 500
No. of Cycles No. of Cycles
10
PURAVIS® Glass Optical Fibers feature high mechanical
Bundle Diameter / mm
stability enabling high flexibility and very small bending
radii. 30 µm
8 50 µm
Loop bending tests of single fibers according to DIN 58
141- 6 show an average diameter of 1.0 mm before 70 µm
breakage for short term bends.
6
For long-term (permanent) bends in static applications the
graph to the right shows the recommended bending angles
depending on bundle diameter for 30 µm and 50 µm fiber
diameter. 4
100%
Intensity loss / %
50%
Numerical Aperture
40% fully illuminated
30%
20%
10%
0%
0,0 0,5 1,0 1,5 2,0 2,5 3,0
Bending radius/ mm