Professional Documents
Culture Documents
Cable Wiring and Cable Connection Procedure
Cable Wiring and Cable Connection Procedure
DEPARTEMENT
Rev. No : 0
AEI-PRC-004 Cable Wiring & Cable Connection Page 1 of 3
Rev. No : 0
AEI-PRC-004 Cable Wiring & Cable Connection Page 2 of 3
1. Purposed
This procedure is used as a guide in performing cable wiring and cable connection work.
2. Preparation
a. Material & Consumble
1. Cable scun
2. Electric Tape
3. Rubber Tape
4. Cable Marker
5. Cable Ties
6. Cable Number
7. Cable Accesories
8. Splicing Cable Kit for High Voltage Cable
9. Cleaner Liquid (Alchol / Aseton)
10. Bolt & Nut if needed
3. Detail Procedure
3.1. Drawing Termination
1. Drawing termination is cable data connection for conect the cable on panel and
equipment
3.2. Standard
1. From Drawing will do fabrication / cable wiring and cable connection based on client
standard or based on Electrical Drawing Standard & Instrument Drawing Standard PT.
Asuka Engineering Indonesia.
3.3. Wiring & Cable Connection
1. Preparation for material and equipment used.
2. Do a Cable check that will be connected both control cable and power cable.
3. Match cable number with exciting Termination Drawing (Connection Cable List)
4. The cable that will be connected must have continuity test first.
5. For High Voltage Cable type connection process following High Voltage Cable Connection
Method and also for Low Voltage Cable must using Low Voltage Cable Connection
Method.
PROCEDURE ELECTRICAL & INSTRUMENT
DEPARTEMENT
Rev. No : 0
AEI-PRC-004 Cable Wiring & Cable Connection Page 3 of 3
6. For Control and Instrument Cable also using Control and Instrument Cable Connection
Method.
7. Worker that doing connect cable for High Voltage Cable must competent in High Voltage
Cable Connection Method.