Professional Documents
Culture Documents
Gad STGM Mas SWF 000006 00
Gad STGM Mas SWF 000006 00
Title: Material Submittal for Display Items (Screens & Tablets) (Wayfinding & Signage
Works)
CONSULTANT COMMENTS
Stamp:
A B C D E Signature:
Status
Date:
A B C D E Signature:
Status
Date:
EMPLOYER COMMENTS
Stamp:
A B C D E Signature:
Status
Date:
Review Status:
FORM-WSF-000 Rev.00
GUGGENHEIM ABU DHABI
Material Description : GRC & Accessories for Signage Works (Wayfinding & Signage Works)
Form No : TRA-SBJ-QCD-QA-GEN-00046-REV0
13.01.2018
MATERIAL SUBMITTAL
GALAXY
Construction Projects
MATERIAL
SUBMITTAL
Project Name:
Guggenheim Abu Dhabi
Package: Wayfinding
& Signage Works
Between
and
WorldWide Digital is a young company with the most experienced team into Digital Signage Soluation with
primary focus to provide extraordinary service to the Digital Signage industry. We are constantly expanding in the growing
Digital Signage market with solutions which include Indoor/Outdoor LED, Video wall, Indoor/Outdoor Standing Display, all in one interactive Kiosk
Consumables and Spare Parts. Having loyal suppliers, valued customers and a dedicated team sets the rhythm for committed
growth and success. Our target is to fulfill the expectations of every client by offering innovative and quality products and
outstanding customer service, thus making the dream of Digital Signge company come true.WorldWide Digital’s dedication to
extraordinary service is what sets us apart from our competition. Our team of diversely skilled professionals continually push
themselves to learn and Evolve so that we may help you to conquer each new challenge on the road to success. We strive to not
only meet our commitments and client expectations but to exceed them on every level and deliver exceptional value.
Our vision is to be the first choice in offering Sales and Service for the prospect and customers and a leader in customer value.
Service excellence is our mission, the critical element for maintaining life-long, valuable relationships. The aim is to perform
consistently and deliver value-added services to our customers with the highest level of quality. In the process meet or exceed
customer expectations. We aim to work hard 24/7 to make WorldWide Digital the most respected service provider in the industry.
SAIF-ZONE SAIF Executive Office P8-01-44 ٤٤-٨-٠١مكتب تنفيذي بيي العــــنوان فــي
ADDRESS P.O.Box 124230 ١٢٤٢٣٠ .ب.ص المنطقة الحرة
Sharjah - U.A.E م.ع. أ- الشارقة
INCORPORATION DATE 18 March 2014 ٢٠١٤ مارس١٨ تاريخ عقد التاسيس
ISSUE DATE 18 March 2023 ٢٠٢٣ مارس١٨ تاريخ الصدار
EXPIRY DATE 17 March 2024 ٢٠٢٤ مارس١٧ تاريخ النتهــــــــاء
REMARKS THIS LICENSE IS ISSUED AND BASED هذه الرخصة صادرة استنادا الى المرسوم الميري ملحظـــــــــات
UPON EMIRI DECREE NO. 2 OF 1995
الصادر في الشارقة بتاريخ١٩٩٥ لسنة٢ رقم
ISSUED IN SHARJAH ON MAY 8, 1995
١٩٩٥ مايو٨
THIS LICENSE IS GRANTED TO THE
LICENSEE ONLY AND SHALL NOT BE له فقط ول يجوز هذه الرخصة ممنوحة للمرخص
LEASED OR TRANSFERRED WITHOUT
PRIOR APPROVAL OF THE SAIF ZONE
تأجيرها أو تحويلها إل بموافقة هيئة المنطقة
الحرة لمطار الشارقة الدولي
SALES IN U.A.E. SHALL BE CARRIED OUT
IN ACCORDANCE WITH THE VALID
تتم أعمال البيع داخل الدولة وفقا للنظم والقوانين
LAWS AND REGULATIONS THEREOF
السارية فيها
1- Send an SMS to 2514 with License number. . مع رقم الرخصة2514 ) إلى الرقمSMS( رسالة نصية قصيرة-1
2- Scan the QR code. )QR Code( مسح رمز الستجابة السريع-2
3- Visit the website: : زيارة الموقع اللكتروني-3
https://portal.saif-zone.com/LicenseDetail.aspx https://portal.saif-zone.com/LicenseDetail.aspx
www.saif-zone.com هذه الوثيقة رسمية ول تحتاج لختم أو توقيع وللتأكد من صحة البيانات يرجى زيارة الموقع
This document is official and it does not need to be stamped or signed. To view license detail visit www.saif-zone.com
3. Compliance Statement
Type 2:
65’’ Digital Display – LG UHD (UH5F Series) – LG Brand
Type 3:
P1.5 Indoor LED Screen – Shenzhen Lamp Technology Co. Ltd. (Unilumin Group) - China
COMPLIANCE STATEMENT
(AS PER SPECIFICATIONS)
SECTION 10 14 00 – SIGNAGE
DESRITION AS PER PROJECT SPCIFICATION AS PER M/S.GALAXY METAL INDUSTRY COMPLIANCE
PART 1 - GENERAL
A. Drawings, Project Database and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this
1.1 RELATED DOCUMENTS Section. Review all listed above to determine details, assemblies and location of dimensional control for all elements of the Work of this section. Noted. Comply.
A. The intent of this specification is to include all items necessary for the proper execution and completion of the Work by the Signage Contractor. Performance by the
Signage Contractor shall be required to the extent consistent with the Contract Documents.
B. The intent of the Contract Documents is to provide everything necessary for a complete contract. All drawings and specifications are mutually dependent. In the event of
Noted. Comply.
a discrepancy, or an error, neither document rules over the other. Signage Contractor is to make the Consultant aware of any inconsistencies found in the design drawings;
including but not limited to incorrect quantities, inconsistencies in the sign between drawings, incorrect dimensions, installation or site conflicts.
C. Provide in accordance with requirements of the Contract Documents. The Signage work is specified bythe performance specifications. The drawings show the design
intent and except for setting out parameters and finished profiles, are indicative only. The Contractor shall full responsibility for the Work of this specification including but
not limited to the following:
1. Be responsible for the engineering, procurement and installation of the Signage work based upon the Drawings and the requirements of this Specification.
2. Be responsible for the final confirmation of materials, sizes, thickness, types, locations of fixings and related accessories, all in accordance with specified standards
Noted and will be complied. Comply.
1.2 SUMMARY detailed herein and submission of samples for review and acceptance by the signage Consultant and Architect prior to fabrication and/or manufacture.
3. Compliance with the requirements of the UAE and the local municipality where the project is located as related to applicable Building Codes, the International Building
Code (IBC) and other applicable local regulations Submit all information necessary to the relevant statutory authorities to obtain approval in timely manner so as to comply
with the construction program.
D. Related Requirements:
1. Division 1 – General Requirements.
2. Work restriction requirements: 01 14 00.
3. Substitution procedures and requirements: 01 25 00
Noted. Comply.
4. Request for Information procedures: 01 26 13.
5. Project management and coordination: 01 31 00.
6. Testing, inspection and quality assurance and mockups: 01 45 23 and 01 45 50.
7. Waste management and disposal requirements: Section 01 74 19.
A. Reference Standards
1. British Standards:
2. United States Standards for Accessible Design (SAD), 2010
3. Council of American Building Officials (CABO)
4. A117.1-98 Accessible and Usable Buildings and Facilities
1.3 REFERENCES Noted. Comply.
5. American National Standards Institute (ANSI):
6. N2.1-89 Warning Symbols
11. Federal Specifications (Fed. Spec.):
15. ADIBC Section 1110, Accessibility and Code Signage.
16. Estidama Pearl Building Rating System; www.estidama.org.
Page 1 of 6
COMPLIANCE STATEMENT
(AS PER SPECIFICATIONS)
SECTION 10 14 00 – SIGNAGE
DESRITION AS PER PROJECT SPCIFICATION AS PER M/S.GALAXY METAL INDUSTRY COMPLIANCE
A. Coordination: All construction administration coordination to be in accordance with Division 1.
Noted. Comply.
1.4 ADMINISTRATIVE
B. Preinstallation Meetings: Arrange a pre installation meeting in accordance with Section 01 31 00 “Project Management and Coordination”
REQUIREMENTS 1. Prior to the start of the Work, meet at the Project site to review methods and sequence of metal fabrication installation, special details and conditions, standard of Noted. Comply.
workmanship, testing and quality control requirements, job organization and other pertinent topics related to the Work.
A. Product Data
1. Submit manufacturer’s literature, specifications and installation instructions describing the general properties of each material and accessory to be used in the Work.
Noted. Comply.
Include, manufacturer’s technical data documenting the primary function, quality and performance of each system and containing specification for each material, or other
information as required.
B. Shop Drawings
2. Submit original shop drawings to illustrate details of Work on minimum sheet size A0 (840mm x 1190mm).
3. Shop drawings, which are to be provided by the Sign Contractor, will be used as the final construction documents and must include all construction, engineering and
installation details for the complete implementation of the designs described herein.
4. The Sign Contractor shall provide dimensioned shop drawings for all signs, clearly showing elevations, sections, dimensions, materials, typographic layouts, fabrication Noted and will be complied. Comply.
methods, external finishes, anchorage, and other details of construction as well as details related to engineering, adjacent construction associated with signage and other
construction responsibilities. The Sign Contractor shall be responsible for all construction, installation and internal supports for a safe and permanent installation of all
signs. Furnish location detail drawings for signs supported or anchored to other construction.
5. Shop drawings shall include complete details of fasteners (diameter, length, type, and material).
C. Samples and Mockups
1. Label samples to indicate product, characteristics, and location in the Work. Samples will be reviewed for color and appearance only. Furnish sufficient samples to
establish the full range of colors and textures for materials exposed in the finished work. Compliance with other requirements is the responsibility of the Contractor.
1.5 SUBMITTALS
4. Provide complete full-size prototypes of each unique sign type as noted in the signage drawings. See individual sheets for additional information and Table B at the end
of this Section.
5. Duly reviewed and approved sign samples shall be the minimum workmanship and quality standard for reference until completion of the Work.
6. Duly reviewed sign type samples shall be retained by the Sign Contractor until released by the Consultant, at which time they may be incorporated into the permanent
Work.
7. Install completed prototype signs on site for each unique sign type. Prototypes to be retained and stored on site for reference. Signs should be coordinated with on-site
construction status as to demonstrate the final condition. Prototypes to be retained and stored on site for reference. Noted and will be complied. Comply.
8. Adjustments made on samples by the Consultant are not intended to change the Contract Price. If adjustments affect the value of the Work, state such in writing for
approval by the Construction Manager prior to proceeding with the Work.
9. The Owner, Consultant or Construction Manager reserve the right to reject any sample or product found not to meet minimum quality and craftsmanship as outlined in
this document and / or deemed inappropriate for the project’s overall design standards. Rejected samples or products will require immediate resubmission with 5 working
days;
unless notified in writing and approved by the Owner, Consultant and / or Construction Manager, and will be furnished at no additional cost. The sign Contractor must have
complete approval on all samples and products prior to production.
10. Product and material manufacturer’s printed specifications, anchorage details, installation and maintenance instructions are to be provided as part of the shop drawing
submittal.
F. Estidama Submittal Requirements
1. Estidama Supporting Documentation as per section 01 81 14, Estidama Requirements. Information to be supplied for this form shall include:
a. Cost breakdowns for the materials included in the Contractor or sub-contractor’s work. Cost breakdowns shall include total cost plus itemized material costs for the
signage system and associated products. Noted and partially complied. Proposed and Complied.
b. The manufacturing location and raw material sources of the signage system and associated products.
c. The amount of post-consumer and/or post-industrial recycled content in the signage system.
d. The VOC content of all interior and field-applied adhesives, sealants, paints, and coatings.
A. Final as built drawings are to be submitted upon completion of work and upon final approval. Drawings are to be submitted in electronic and hard copy form to the
client. Drawings are to show details and notes including final as built conditions, designs, and included any site instructions and / or addendums required for the fabrication
1.6 CLOSEOUT SUBMITTALS and installation of the products.
Noted and will be complied. Comply.
Page 2 of 6
COMPLIANCE STATEMENT
(AS PER SPECIFICATIONS)
SECTION 10 14 00 – SIGNAGE
DESRITION AS PER PROJECT SPCIFICATION AS PER M/S.GALAXY METAL INDUSTRY COMPLIANCE
A. Basis of Design: When particular manufacturers’ materials, products or processes are specified for an item of Work, only approved alternatives may be used. An
alternative material, product or process will be considered if the Contractor submits a written substitution request together with such information as may be necessary to
assist the Engineer in determining whether the proposed substitution is acceptable; the burden of proof rests solely upon the Contractor.
B. Fabricator/Installer: A firm specializing in signage fabrication work similar to that indicated for this project for a minimum of 5 years and with sufficient production and
installation capacity to produce required products, systems and assemblies specified without causing delay to the Work.
C. Regulatory Requirements: Comply with applicable requirements of the laws, codes, ordinances and regulations of authorities having jurisdiction. Obtain necessary
approvals from authorities having jurisdiction.
D. The Consultant must be notified of any variations of conditions as shown on these drawings. It shall be the Sign Contractor’s responsibility to obtain and utilize the most
current and up-todate plans and specifications for all construction and installation work.
1.8 QUALITY ASSURANCE Noted and will be complied. Comply.
E. Work done and material furnished shall be of superior quality in every respect. The Owner, Consultant, and / or Construction Manager shall reserve the right to reject
any work or materials that are not deemed acceptable by their assessment.
F. The Owner, Consultant, and / or Construction Manager shall reserve the right to reject any shop drawings, samples, or other submittals, as well as any finished product or
installation that does not meet or exactly equal the standard of quality established. Any such decision will be considered final and not subject to recourse.
G. The Sign Contractor must guarantee that only new materials are being used for this work.
H. Products must be made accessible for quality control inspection at any time.
I. Any claims for work carried out on instructions by others will not be accepted or honored.
J. Provide site administration and inspection of this part of the Work.
A. Sign fabricator is to provide a complete and detailed schedule of all activities related to the fabrication and installation of sign products. This should include but is not
limited to:
1. Submission of samples
1.11 SCHEDULE 2. Submission of prototypes Noted and will be complied. Comply.
3. Installation of on-site mockups and prototypes
4. Submission of shop drawings
6. Installation including key milestones such as final installation of product types, complete installation.
A. Manufacturer Warranty: Warrant work of this Section for period of 2 years against defects and/or deficiencies in accordance with Section 01 77 00. Promptly correct any
defects or deficiencies, which become apparent within warranty period, to satisfaction of the signage consultant or Architect and at no expense to Owner. Defects include Noted.
1.12 WARANTY Comply.
but are not limited to buckling, opening of seams, bond failure and extensive colour fading. Draft warranty will be provided with material submittal.
Page 3 of 6
COMPLIANCE STATEMENT
(AS PER SPECIFICATIONS)
SECTION 10 14 00 – SIGNAGE
DESRITION AS PER PROJECT SPCIFICATION AS PER M/S.GALAXY METAL INDUSTRY COMPLIANCE
PART 2 – PRODUCTS
A. The Designs contained within the Contract are the property of Pentagram and may not be used for any other purpose than reference without express written permission
of the Owners and / or Pentagram.
B. Provide graphics items as completed units produced by a single manufacturer, including necessary mounting accessories, fittings and fastenings.
C. Do not scale drawings for dimensions. Sign Contractor to verify and be responsible for all dimensions and conditions shown by these drawings. Construction Manager to
be notified of any discrepancy in drawing, in field directions or conditions, and / or of any changes required for all such construction details.
D. The Sign Contractor, by commencing work of this section, assumes overall responsibility, as part of his warranty of work, to assure that assemblies, components and
parts shown or required within the work of the section, comply with the Contract Documents. The Sign Contractor shall further warrant that all components, specified or
2.1 GENERAL required to satisfactorily complete the
Noted and will be complied. Comply
installation, are compatible with each other and with conditions of installations.
E. The Sign Contractor shall obtain and pay for all necessary permits and variances.
F. The Sign Contractor is responsible for meeting all local, building codes as well established national standards and requirements.
G. Sign components presented in the Graphics document are for design intent purposes only. Duly reviewed and /or engineered shop drawings shall be provided by the
Sign Contractor to be used as the final construction documents, and shall include complete construction, engineering and installation details required for implementing the
designs described herein.
H. LED Illumination
1. 6mm White LED panel to provide continuous even illumination to all visible area of sign face without hot or cold spots.
2. Final hook-up by Signage Contractor. Electrical components/power supply to be housed within sign assembly where space is available, otherwise internal cavity below
grade is required.
I. Commercial Displays 1. Not in GMI (WWD) scope.
1. Display: Professional Grade high definition Display Panel. 2. Noted and will be complied.
2. Displays to be provided in 2286mm (90”), 1651mm (65”), 1092.2mm (43”) and 533.4mm (21”). 3. Noted and will be complied.
3. Provide and install high definition display panels. There shall be a gang of commercial grade display panels that create the panels or single displays as described in the 4. NUC Media Player Incuded.
drawing package for per location. Exact mounting locations and configuration are shown on the drawings. 4a. Software and integration with BAS not in GMI (WWD) scope.
4. Provide and install message display controller and software provided by the manufacturer for the commercial display panels. Proposed and Comply
5. HDMI
a. Message display controller and software to interface with the BAS to display graphic representations of energy consumption, water consumption, weather data, and 6. Noted and will be complied.
building sustainability diagrams as required by Estidama credit IDP-6 7. Noted and will be complied.
5. Provide and install video processor to interface various video signal feeds to allow video content to be displayed correctly on to the commercial display panels. 8. Noted and will be complied.
Contractor shall verify exact quantity of processors required prior to installation.
6. Thin, adjustable brackets to be provided to securely attach the monitor to the wall, and match the viewing angles to those specified within the contract documents. All
bracket attachments to be colored matte black and allow for monitors to be easily serviced.
7. Mounting brackets to be secured to wall using bracket manufacturers specifications and allow for integration of power and data cable runs to create a clean installation
of all control systems.
8. There are to be no visible manufacturers names, indicator lights or control buttons.
2.2 MATERIALS
Page 4 of 6
COMPLIANCE STATEMENT
(AS PER SPECIFICATIONS)
SECTION 10 14 00 – SIGNAGE
DESRITION AS PER PROJECT SPCIFICATION AS PER M/S.GALAXY METAL INDUSTRY COMPLIANCE
9. The 2286mm (90”), 1651mm (65”), and 1092.2mm (43”) commercial displays shall have the following minimum specifications:
a. Native resolution: 1920 x 1080 9. For LED(90") screen it will be complied. 43" changed to 65"
b. Brightness (minimum) 700 nits or greater a. LED screen 746 x 1280 pixels / LCD will be complied.
2.2 MATERIALS c. Contrast Ratio (typical): 5000:1 b.LCD Screen only 500 Nits / LED will be complied.
Proposed and Comply
d. Viewing Angle (typical): 176° Vert., 176° Hor. (88U/88D/88L/88R) @ CR>10 C. LCD screen 1000:1 / LED will be complied.
e. Response Time (Gray to Gray): 4 ms Noted will be complied.
f. Refresh Rate: 60Hz
g. Aspect Ratio: 16:9
J. Commercial Grade Tablet Display (533.4mm or 21”)
1. Multi-purpose fixed commercial grade tablet display for interactive signage to deliver commercialgrade computing with a PC-based platform. Installation to provide
control and content management to the commercial-grade tablet display via ethernet connection.
2. The minimum specifications are as follows:
a. Native resolution: Full HD 1920 x 1080 @ 60Hz
b. Brightness (typical): LCD Panel: 250 nits; PCAP: 225 nits
c. Contrast Ratio: 3000:1
d. Viewing Angle (typical): Horizontal +/- 89° or 178° total / Vertical +/- 89° or 178° total j. not 21" its 19" interactive.
e. Response Time-total (typical): 30 msec 1. control and content managment not in GMI (WWD) scope. Proposed and Comply
f. Aspect Ratio: 16:9 Complied as per quoted product.
g. Processor: i5: Intel i5 2.3GHz (up to 3.3 GHz) 6500TE Quad-Core Processor; 6MB Smart Cache
h. Storage: 128GB hard drive or greater
i. Bluetooth 4.0
j. Ethernet Port: 1 x LAN RJ45 (Gigabit)
k. Wireless: Wi-Fi 802.11 a/b/g/n/ac
l. The contractor shall certify that their proposed solution is fit for the intended purpose.
A. General: Provide same basic metal or alloy as the metal to be fastened, and finish to match in colour and texture. Type, grade, class and style best suited for the
respective purpose. Use countersunk flat-head type machine screws for exposed fasteners. Use stainless steel fasteners for exterior construction, dissimilar materials and
for fastening components fabricated of galvanized steel.
2.5 FASTENERS 1. Steel Bolts, Screws and Nuts: BS 3692. Noted and will be complied. Comply
2. Stainless Steel Bolts, Screws, Studs and Nuts: BS 6105
3. Include supplementary parts necessary to complete metal fabrications work though not definitely shown or specified.
PART 3 - EXECUTION
A. Manufacturer's Instructions: Prepare substrates and install the work of this Section, including, components and accessories in accordance with the manufacturer's
3.1 GENERAL instructions, except where more stringent requirements are shown or specified, and where project conditions require extra precautions or provisions to ensure satisfactory Noted. Comply
performance of the Work.
A. Site Verification of Conditions: Verify actual site dimensions and location of adjacent materials prior to commencing work. Notify Consultant in writing of any conditions
that would be detrimental to the installation. Commencement of work implies acceptance of previously completed work.
B. General signage locations are shown on signage plan drawings. Architectural elevations, floorplans and reflected ceiling plans are to be consulted for specific site,
3.2 EXAMINATION location, and elevation details. Noted and will be complied. Comply
C. Sign Contractor shall notify the Construction Manager in writing of unacceptable substrates, detrimental conditions or dimensional discrepancies.
D. Beginning work indicates acceptance of substrate and subsequent modifications will become the Sign Contractor’s complete responsibility.
E. When not enough information has been provided for installation, the Sign Contractor is responsible for determining the correct sign positioning with the Consultant or
Owner prior to installation.
A. Examine the substrates, adjoining construction and the conditions under which the Work is to be installed. Do not proceed with the Work until unsatisfactory conditions
3.3 PREPARATION have been corrected. Noted. Comply
Page 5 of 6
COMPLIANCE STATEMENT
(AS PER SPECIFICATIONS)
SECTION 10 14 00 – SIGNAGE
DESRITION AS PER PROJECT SPCIFICATION AS PER M/S.GALAXY METAL INDUSTRY COMPLIANCE
A. Protect products against damage during field handling and installation. Protect adjacent existing and newly placed construction, landscaping and finishes as necessary to
prevent damage during installation. Paint and touch up any exposed fasteners and connecting hardware to match color and finish of surrounding surface.
B. Mount signs in proper alignment, level and plumb according to the sign location plan and the dimensions given on elevation and sign location drawings. Where otherwise
not dimensioned, signs shall be installed where best suited to provide a consistent appearance throughout the project. When exact position, angle, height or location is in
doubt, contact Consultant or
Construction Manager for clarification.
Noted. Comply
C. Sign Contractor shall own and be responsible for all signs that are damaged, lost or stolen while materials are on the job site and up until the completion and final
acceptance of the job.
D. Remove or correct signs or installation work the Construction Manager determines as unsafe or as an unsafe condition.
F. Locate signs as shown in G1 and G2 series of drawings (Sign Location Plans).
3.5 INSTALLATION
G. Sign Contractor will be responsible for verifying that behind each sign location there are no utility lines that will be affected by installation of signs. Any damage to
utilities during installation of signs will be the sole responsibility of the Sign Contractor to correct and repair.
I. Sign Contractor to be responsible for signage internal wiring and electrical and data cable hookup. All source power and data will be supplied to the general vicinity of
electrified signs; by others.
J. The Sign Contractor is to protect goods supplied by him from damage during installation with appropriate insurance against fire, theft, or other damage. He shall also
protect from injury the property of the Owner, which may be adjacent, or with which he may come in contact, and he shall make good any such damage occurring through Comply
Noted.
his fault.
L. All exterior structure to support signage is the responsibility of the Sign Contractor. All necessary blocking, plates or supports within the walls are to be the responsibility
of the subcontractor unless otherwise specified.
A. Contractor’s Testing and Inspection: Perform the following tests and inspections.
3.6 FIELD QUALITY CONTROL 1. Bolted Connection Inspection: Noted Comply
a. Visual inspection of all bolted connections after assembly for correct installation and assurance of fit and tightness.
A. Site Tests and Inspections:
Noted.
3.7 SITE QUALITY CONTROL 2. Non-Conforming Work: Replace damaged work which cannot be satisfactorily repaired, restored or cleaned, to satisfaction of Architect at no cost to Owner. Comply
ITP will be submitted following project requirements.
A. The Contractor will commence Closeout Procedures in accordance with the requirements in Section 017700 Close Out Procedures. Employers Representative will
schedule and conduct a project closeout conference at a time convenient to Employer and Employers Representative, but no later than 90 days prior to the scheduled Time
3.8 PROJECT COMPLETION of Completion date of the Works.
Noted and will be complied. Comply
Page 6 of 6
COMPLIANCE STATEMENT - TECHNICAL (AS PER IFC DRAWINGS)
SUBCONTRACTOR : GALAXY METAL INDUSTRIES LLC
Sr. No. Sign Type/Name SIGNAGE - Identification Specification Proposed Material Grade/Finish Status Remarks
C SIGNAGE - Digital
Sign Code D1.1 Exhibition Directory - Glass / LCD (FOH); 3000 x 1500 x 2-
6mm Laminated Glass Assembly (Annealed); with 3M Scotchcal ElectroCut
1 19/19 Add -01 - A Graphic Film 'Dusted Crystal' applied to second surface of glass; attached 90" LED Display 90" LED Display N/A Comply
to 90" LED display mounted; Supported by 316 S/S Base Block and typical
S/S threaded cleanly welded to bracket piece, as per drwg no. G5-133
Sign Code D1.2 Map Directory - Glass / LCD (FOH); 3000 x 1500 x 2-6mm
Laminated Glass Assembly (Annealed); with 3M Scotchcal ElectroCut
2 19/19 Add -01 - B Graphic Film 'Dusted Crystal' applied to second surface of glass; attached 90" LED Display 90" LED Display N/A Comply
to 90" LED display mounted; Supported by 316 S/S Base Block and typical
S/S threaded cleanly welded to bracket piece, as per drwg no. G5-134
Sign Code D6 Studio Lab Display - 3mm Low iron glass panel secure to 19"
6 19/20 Add-01 - A multi sync monitor; attached with wall bracket; 440 x 368mm overall size, 19' Thick display 19' Thick display N/A Comply
as per drwg no. G5-140
4. Project Architect Schedule
and Specification
Signage
TURNER CONSTRUCTION
– INTERNATIONAL LLC ISSUED
PROJECT MANAGER
P.O. BOX 890, No. Description Date
Abu Dhabi, United Arab Emirates - ADDENDUM NO. 1 06/12/2020
GEHRY PARTNERS, LLP
1 ISSUE FOR CONSTRUCTION 12/11/2020
ARCHITECT ISSUE FOR CONSTRUCTION -
12541 Beatrice Street 2 UPDATE
5/31/2021
Los Angeles, CA 90066, USA
ISSUE FOR CONSTRUCTION
C01 UPDATE – IFC 2
03/21/2022
ARUP GULF LTD
ENGINEER
39th Floor, Media One Tower, Dubai Media City
Dubai, P.O. Box 212416, United Arab Emirates
PART 1 - GENERAL
1.2 SUMMARY
A. The intent of this specification is to include all items necessary for the proper execution and completion
of the Work by the Signage Contractor. Performance by the Signage Contractor shall be required to
the extent consistent with the Contract Documents and reasonably inferable from them as being
necessary to produce the indicated results.
B. The intent of the Contract Documents is to provide everything necessary for a complete
contract. All drawings and specifications are mutually dependent. In the event of a discrepancy,
or an error, neither document rules over the other. Signage Contractor is to make the
Consultant aware of any inconsistencies found in the design drawings; including but not limited to
incorrect quantities, inconsistencies in the sign between drawings, incorrect dimensions,
installation or site conflicts.
C. Provide in accordance with requirements of the Contract Documents. The Signage work is specified by
the performance specifications. The drawings show the design intent and except for setting out
parameters and finished profiles, are indicative only. The Contractor shall full responsibility for the
Work of this specification including but not limited to the following:
1. Be responsible for the engineering, procurement and installation of the Signage work based upon
the Drawings and the requirements of this Specification.
2. Be responsible for the final confirmation of materials, sizes, thickness, types, locations of fixings
and related accessories, all in accordance with specified standards detailed herein and
submission of samples for review and acceptance by the signage Consultant and Architect prior
to fabrication and/or manufacture.
3. Compliance with the requirements of the UAE and the local municipality where the project is
located as related to applicable Building Codes, the International Building Code (IBC) and other
applicable local regulations Submit all information necessary to the relevant statutory authorities
to obtain approval in timely manner so as to comply with the construction program.
D. Related Requirements:
1. Division 1 – General Requirements.
2. Work restriction requirements: 01 14 00.
3. Substitution procedures and requirements: 01 25 00
4. Request for Information procedures: 01 26 13.
5. Project management and coordination: 01 31 00.
6. Testing, inspection and quality assurance and mockups: 01 45 23 and 01 45 50.
7. Waste management and disposal requirements: Section 01 74 19.
8. Provision of Estidama requirements: Section 01 81 14.
9. Use of Timber construction requirements: Section 06 18 00.
10. Precast concrete requirements: Section 03 45 00.
11. Exterior Plaster Assemblies: Section 09 24 00
12. Glass-Fiber-Reinforced Concrete: Section 03 49 00
1.3 REFERENCES
A. Reference Standards
1. British Standards:
2. United States Standards for Accessible Design (SAD), 2010
3. Council of American Building Officials (CABO)
4. A117.1-2003 Accessible and Usable Buildings and Facilities
5. American National Standards Institute (ANSI):
6. N2.1-89 Warning Symbols
7. American Society for Testing and Materials (ASTM):
8. B209-96 Aluminum and Aluminum-Alloy Sheet and Plate
9. B221-96 Aluminum and Aluminum-Alloy Extruded Bars, Rods Wire, Shapes and Tubes.
10. A480M-06b Rolled Stainless and Heat-Resisting STEEL Plate, Sheet, and Strip
11. Federal Specifications (Fed. Spec.):
12. MIL-P-8184E Plastic Sheet, Acrylic, Modified.
13. MIL-P-46144C Plastic Sheet, Polycarbonate
14. AWS "Structural Welding Code"
15. ADIBC Section 1110, Accessibility and Code Signage.
16. Estidama Pearl Building Rating System; www.estidama.org.
1.5 SUBMITTALS
A. Product Data
1. Submit manufacturer’s literature, specifications and installation instructions describing the
general properties of each material and accessory to be used in the Work. Include,
manufacturer’s technical data documenting the primary function, quality and performance of
each system and containing specification for each material, or other information as
required.
B. Shop Drawings
1. Show in detail the construction, thickness of materials, jointing, methods of installation,
fastening and supports, location and sizes of welds, anchoring, hangers, additional
reinforcing of structural steel, and all other pertinent information. Show all loads and
eccentricities. Submit details drawn to scale at not less than 1:5. Shop drawings shall
contain the design, type of steel and load assumption and shall bear the seal of a
licensed Professional Engineer (Submit Professional Engineer's credentials and license).
2. Submit original shop drawings to illustrate details of Work on minimum sheet size A0
(840mm x 1190mm).
1.11 SCHEDULE
A. Sign fabricator is to provide a complete and detailed schedule of all activities related to the
fabrication and installation of sign products. This should include but is not limited to:
1. Submission of samples
2. Submission of prototypes
3. Installation of on-site mockups and prototypes
4. Submission of shop drawings
5. Fabrication of signs including key milestones such as acquisition of materials, fabrication
of sign products, painting and finishing
6. Installation including key milestones such as final installation of product types, complete
installation
1.12 WARANTY
A. Manufacturer Warranty: Warrant work of this Section for period of 2 years against defects and/or
deficiencies in accordance with Section 01 77 00. Promptly correct any defects or
deficiencies, which become apparent within warranty period, to satisfaction of the signage
consultant or Architect and at no expense to Owner. Defects include but are not limited to;
buckling, opening of seams, bond failure and extensive colour fading.
PART 2 – PRODUCTS
2.1 GENERAL
A. The Designs contained within the Contract are the property of Pentagram and may not be
used for any other purpose than reference without express written permission of the Owners and
/ or Pentagram.
B. Provide graphics items as completed units produced by a single manufacturer, including
necessary mounting accessories, fittings and fastenings.
C. Do not scale drawings for dimensions. Sign Contractor to verify and be responsible for all
dimensions and conditions shown by these drawings. Construction Manager to be notified of
any discrepancy in drawing, in field directions or conditions, and / or of any changes required
for all such construction details.
D. The Sign Contractor, by commencing work of this section, assumes overall responsibility, as part
of his warranty of work, to assure that assemblies, components and parts shown or required
within the work of the section, comply with the Contract Documents. The Sign Contractor shall
further warrant that all components, specified or required to satisfactorily complete the
installation, are compatible with each other and with conditions of installations.
E. The Sign Contractor shall obtain and pay for all necessary permits and variances.
F. The Sign Contractor is responsible for meeting all local, building codes as well established
national standards and requirements.
2.2 MATERIALS
A. Metal Surfaces, General: For metals which will be exposed to view in the finished work,
only use materials which are smooth and free of pitting, seam marks, roller marks, rolled
trade names, roughness and other surface blemishes.
1. Steel:
a. Steel Plates, Shapes, and Bars: BS 1449 Part 1.
b. Structural Shapes: BS 5950 Part 1.
c. Structural Carbon Steel Tube: BS 1387.
d. Structural Steel Sections: BS 4 Part 1.
e. Hot-Rolled Steel Sections: BS 4848 Part 2.
f. Welding Rods and Bare Electrodes: Select in accordance for the metal alloy to be
welded. Welding procedures shall be such that distortion is reduced to a minimum
and local distortion rendered negligible in the final fabrication. Corrections, if
necessary, shall be undertaken by a method, w h i c h has been agreed to by
the consultant. No welds other than those shown on the Shop Drawings, even for
temporary attachments or repairs, shall be acceptable unless agreed by the
consultant. If welded temporary connections are agreed upon, then the welding and
removal of the connection shall be in accordance with clause 15 of BS EN 1011-1.
2. Aluminum: Provide alloy and temper recommended by aluminum producer or finisher for
type of use and finish specified or shown, and with not less than the strength and durability
properties of the alloy and temper designated below for each aluminum form required.
a. Aluminum Extrusions: All extruded aluminum alloy framing members shall be
fabricated from the appropriate grade of aluminum alloy complying with BS EN
12020-1 and BS EN 755-2, unless otherwise specified.
b. Aluminum Sheet: Unless specified otherwise, aluminum sheeting shall be a minimum
of 3mm thick and satisfy the requirements of BS 1470, BS EN 485: Parts 1-4, BS
EN 515 and BS EN 573: Parts 1-4.
c. All painted surfaces properly primed. Finish coating of paint to have complete
coverage.
2.3 FABRICATION
A. Include supplementary parts necessary to complete metal fabrications work though not definitely shown
or specified.
B. Verify measurements and dimensions at the job site and cooperate in the coordination and scheduling
of the work of this Section with the work of related trades (with particular attention given to the
installation of items embedded in concrete and masonry). Allow for trimming and fitting of metal
fabrications wherever the taking of field measurements before fabrication might delay job progress.
On shop drawings, note which dimensions have been verified by field measurement.
C. Fabrication Tolerances: Fabrication tolerances shall generally comply with BS 5950 Part 2, and special
tolerances shall be determined as required in order to produce proper fit and coordination with other
trades. The special tolerances pertaining to length, squareness, preassembled units, milling, camber
and any other items, shall be submitted for consultant’s review.
D. Engineer, fabricate and install exterior components to provide for expansion and contraction over an
ambient temperature range of 45°C ambient temperature range of -10ºC to +40ºC, which may result in
a surface temperature exceeding 90°C without buckling, undue stress on members or anchors, and
other detrimental effects. Fabricate joints that will be exposed to weather in a manner to exclude
water, or provide weep holes where water may accumulate.
E. Typography:
1. All typographic layouts shall utilize typeface specified in each sign type drawing.
2. Letterforms and symbols shall be photographically or digitally rendered in precise, crisp, clean
forms. All letterforms shall be free of ticks, discontinuous curves, line waves, cut or ragged
edges, edge build-up, bleeding, surface pinholes, and other imperfections. Letterforms shall
conform to the prescribed proportions of the typographic font(s) specified by the Consultant.
3. All text, arrows, and symbols to be provided in size, colors, typefaces and letter spacing shown.
Text shall be a true, clean, accurate reproduction of typeface(s) shown. Text shown in drawings is
for prototypical layout purposes only; final text for signs will be finalized prior to commencement of
fabrication of individual sign types.
2.4 FINISHES
1. All painted surfaces properly primed. Finish coating of paint to have complete coverage
with no light or thin applications allowing substrate or primer to show. Finish surfaces
2.5 FASTENERS
A. General: Provide same basic metal or alloy as the metal to be fastened, and finish to match in
colour and texture. Type, grade, class and style best suited for the respective purpose. Use
countersunk flat-head type machine screws for exposed fasteners. Use stainless steel fasteners
for exterior construction, dissimilar materials and for fastening components fabricated of
galvanized steel.
1. Steel Bolts, Screws and Nuts: BS 3692.
2. Stainless Steel Bolts, Screws, Studs and Nuts: BS 6105
3. Include supplementary parts necessary to complete metal fabrications work though not
definitely shown or specified.
PART 3 - EXECUTION
3.1 GENERAL
A. Manufacturer's Instructions: Prepare substrates and install the work of this Section, including,
components and accessories in accordance with the manufacturer's instructions, except where
more stringent requirements are shown or specified, and where project conditions require
extra precautions or provisions to ensure satisfactory performance of the Work.
3.2 EXAMINATION
A. Site Verification of Conditions: Verify actual site dimensions and location of adjacent materials prior
to commencing work. Notify Consultant in writing of any conditions that would be detrimental to
the installation. Commencement of work implies acceptance of previously completed work.
B. General signage locations are shown on signage plan drawings. Architectural elevations, floor
plans and reflected ceiling plans are to be consulted for specific site, location, and elevation
details.
C. Sign Contractor shall notify the Construction Manager in writing of unacceptable substrates,
detrimental conditions or dimensional discrepancies.
D. Beginning work indicates acceptance of substrate and subsequent modifications will become the
Sign Contractor’s complete responsibility.
E. When not enough information has been provided for installation, the Sign Contractor is
responsible for determining the correct sign positioning with the Consultant or Owner prior to
installation.
3.3 PREPARATION
3.4 COORIDINATION
A. Coordinate installation of anchorages for metal fabrications. Furnish setting drawings,
templates, and directions for installing anchorages, including sleeves, concrete inserts,
anchor bolts, and items with integral anchors, that are to be embedded in concrete or
masonry. Deliver such items to Site in time for installation.
B. Coordinate lettering carved into concrete or GFRC panels that are specified in this Section but
required for work of another Section. Deliver such items to Site in time for installation.
C. Coordinate power, electrical, and data components as needed.
3.5 INSTALLATION
A. Protect products against damage during field handling and installation. Protect adjacent
existing and newly placed construction, landscaping and finishes as necessary to prevent
damage during installation. Paint and touch up any exposed fasteners and connecting
hardware to match color and finish of surrounding surface.
B. Mount signs in proper alignment, level and plumb according to the sign location plan and the
dimensions given on elevation and sign location drawings. Where otherwise not dimensioned,
signs shall be installed where best suited to provide a consistent appearance throughout the
project. When exact position, angle, height or location is in doubt, contact Consultant or
Construction Manager for clarification.
C. Sign Contractor shall own and be responsible for all signs that are damaged, lost or stolen while
materials are on the job site and up until the completion and final acceptance of the job.
D. Remove or correct signs or installation work the Construction Manager determines as unsafe
or as an unsafe condition.
E. At completion of sign installation, clean exposed sign surfaces. Clean and repair any
adjoining surfaces and landscaping that became soiled or damaged as a result of installation of
signs.
F. Locate signs as shown in G1 and G2 series of drawings (Sign Location Plans).
G. Sign Contractor will be responsible for verifying that behind each sign location there are no utility
lines that will be affected by installation of signs. Any damage to utilities during installation of
signs will be the sole responsibility of the Sign Contractor to correct and repair.
H. Furnish inserts and anchoring devices that must be set in concrete or other material for
installation of signs. Provide setting drawings, templates, instructions and directions for
installation of anchorage devices that may involve other trades.
I. Sign Contractor to be responsible for signage internal wiring and electrical and data cable hook-
up. All source power and data will be supplied to the general vicinity of electrified signs; by
others.
J. The Sign Contractor is to protect goods supplied by him from damage during installation with
appropriate insurance against fire, theft, or other damage. He shall also protect from injury the
property of the Owner, which may be adjacent, or with which he may come in contact, and he
shall make good any such damage occurring through his fault.
K. The Sign Contractor shall not use any hazardous substances in the manufacture of the signs,
nor bring on site any hazardous substances, regulated under any environmental laws, without
the express written consent of the Owner.
TABLE A
Temporary Models: All temporary models to be reviewed at Architect’s office. Temporary models shall
be constructed of white foamcore and/or white posterboard; with digital paper prints applied to represent
placeholder graphics as applicable. See individual sheets for additional information.
Sheet Sign Type Description Model Requirement
G5-104 A1.4 Site ID - Weaving Scrims Partial Model
G5-112 A5.1 Tickets ID Partial Model
G5-122 A8.2 West Lobby - Kiosk Ticketing Full Model
G5-127 B2 Pedestrian Directional (Wall Mounted) Full Model
G5-130 C1 Cone and Artwork Display Totem Full Model
G5-131 C3.1 Elevator Directory - FOH Full Model
G5-133 D1.1 Exhibition Directory - Glass Panel/LCD Display - FOH Full Model
G5-138 D5.1 Exhibition Directory - Glass Panel/LCD Display - VIP Full Model
G5-141 E1.1 Room ID - FOH Full Model
G5-146 G1.1 Egress Map - FOH Full Model
G5-148 H1.1 Secondary Amenities ID – FOH (Wall Mounted) Full Model/2 Layouts
G5-150 H2 Secondary Amenities ID – (Large Pictogram Full Model/2 Layouts
TABLE B
Prototypes: Provide complete full-size prototypes of each unique sign type as noted in the signage draw-
ings. See individual sheets for additional information.
Sheet Sign Type Description Prototype
Requirement
G5-101A A1.1 Site ID Partial Prototype
G5-102 A1.2 Site ID @ Security Building Partial Prototype
G5-103 A1.3 Site ID @ Main Entrance Full Prototype
G5-104 A1.4 Site ID - Weaving Scrims Partial Prototype
G5-106 A2.1 Theater ID Full Prototype
G5-107 A3.1 Museum Shop ID (Primary) Partial Prototype
G5-108 A3.2 Museum Shop ID (Secondary) Partial Prototype
G5-109 A4.1 Group Ticket Sales (Primary) Partial Prototype
G5-110 A4.2 Group Ticket Sales (Secondary) Partial Prototype
G5-112 A5.1 Tickets ID - Main Partial Prototype
G5-120 A7.1 Gallery ID (Number) Full Prototype
G5-133 D1.1 Exhibition Directory – Glass Panel/LCD Display - FOH Full Prototype
G5-125 A12.1 Level ID @ Stairs (On Glass) Full Prototype
G5-126 A21 Loading Dock ID Full Prototype
G5-127 B2 Pedestrian Directional (Wall Mounted) Full Prototype
G5-128 B3 Pedestrian Directional - BOH (Wall Mounted) Full Prototype
G5-129 B4 Pedestrian Directional (On Glass) Full Prototype
G5-130 C1 Cone and Artwork Display Totem Full Prototype
G5-131 C3.1 Elevator Directory - FOH Full Prototype
G5-132 C3.2 Elevator Directory - BOH Full Prototype
G5-135 D3 Event Display @ Tickets/Members Counters Full Prototype
G5-136 D4 Event Display @ Bag Check Full Prototype
G5-138 D5.1 Exhibition Directory – Glass Panel/LCD Display - VIP Full Prototype
G5-140 D6 Studio Lab Display Full Prototype
G5-141 E1.1 Room ID - FOH Full Prototype
G5-142 E1.2 Room ID - BOH Full Prototype
G5-143 E1.3 Room ID - Security Zone Full Prototype
G5-144 E2 Work Station ID Full Prototype
G5-145 E3 Security Zone ID Full Prototype
G5-146 G1.1 Egress Map - FOH Full Prototype
G5-147 G1.2 Egress Map - BOH Full Prototype
G5-148 H1.1 Secondary Amenities ID - FOH (Wall Mounted) Full Prototype
G5-149 H2.1 Secondary Amenities ID - BOH (Wall Mounted) Full Prototype
G5-150 H2 Secondary Amenities ID - (Large Pictogram) Full Prototype
G5-151 H3 Secondary Amenities ID – (Projecting) Full Prototype
G5-152 H4.1 Prayer Room ID - VIP FOH Full Prototype
G5-153 H4.2 Prayer Room - BOH Full Prototype
G5-154 J4 Permanent Collection ID Full Prototype
G5-155 J5 Exhibition Display @ Galleries Full Prototype
G5-156 R1.1 No Smoking Sign Full Prototype
G5-157 R1.2 Designated Smoking Area - Wall Mounted Full Prototype
END OF SECTION 10 14 00
Type 2:
65’’ Digital Display – LG UHD (UH5F Series) – LG Brand
Type 3:
P1.5 Indoor LED Screen – Shenzhen Lamp Technology Co. Ltd. (Unilumin Group) - China
L G S i n g l e To u c h M o n i t o r
Energy Efficiency Certification
UL conducted an independent evaluation on behalf of:
LG ELECTRONICS INC
LCD TV Division
222 LG-ro Jinwi-myeon Pyeongtaek-si 451-713 Gyeonggi-do Republic of Korea
2022-04-18
for the following products: This product meets all of the necessary
qualifications pursuant to:
Display
N/A
Brand: LG ENERGY STAR®: Program requirements for
Displays Version 8.0
Model Name: 19MB15T
00-VS-F0419, Version 6.0, This is to cer�fy that representa�ve samples of the Cer�fied Product(s) listed above have been inves�gated by UL to the Standard(s) indicated on this cer�ficate, in accordance with the UL Global Services Agreement and the EEC Terms & Condi�ons (“Agreement”). The
Cer�ficate Holder is en�tled to use the UL Energy Verified Mark for the Cer�fied Product(s) listed on the cer�ficate and manufactured at the production site(s) covered by the UL Test Report, in accordance with the terms of the Agreement. This Cer�ficate shall remain valid unless a Standard iden�fied on
this Cer�ficate is amended or withdrawn prior to that date or there is a non-compliance with the Agreement.
Type 1:
LG Single Touch Monitor 19MB15T (19’’) – LG Brand
Type 2:
65’’ Digital Display – LG UHD (UH5F Series) – LG Brand
Type 3:
P1.5 Indoor LED Screen – Shenzhen Lamp Technology Co. Ltd. (Unilumin Group) - China
Energy Efficiency Certification
UL conducted an independent evaluation on behalf of:
LG ELECTRONICS INC
LCD TV Division
222 LG-ro Jinwi-myeon Pyeongtaek-si 451-713 Gyeonggi-do Republic of Korea
2022-04-13
for the following products: This product meets all of the necessary
Display
qualifications pursuant to:
N/A
Brand: LG ENERGY STAR®: Program requirements for
Displays Version 8.0
Model Name: 65UH5J
00-VS-F0419, Version 6.0, This is to certify that representative samples of the Certified Product(s) listed above have been investigated by UL to the Standard(s) indicated on this certificate, in accordance with the UL Global Services Agreement and the EEC Terms & Conditions (“Agreement”). The
Certificate Holder is entitled to use the UL Energy Verified Mark for the Certified Product(s) listed on the certificate and manufactured at the production site(s) covered by the UL Test Report, in accordance with the terms of the Agreement. This Certificate shall remain valid unless a Standard identified on
this Certificate is amended or withdrawn prior to that date or there is a non-compliance with the Agreement.
Type 1:
LG Single Touch Monitor 19MB15T (19’’) – LG Brand
Type 2:
65’’ Digital Display – LG UHD (UH5F Series) – LG Brand
Type 3:
P1.5 Indoor LED Screen – Shenzhen Lamp Technology Co. Ltd. (Unilumin Group) - China
Technical Parameters
Module Specs
Electronic
Refresh Rate Hz >3840Hz
Parameter
Driving Type 1/26 Scan
AC Input Frequency Hz 50
Electrical
Parameter
AC Input Power Maximum Value W/m²
Storage Temperature 40 60
TB50 Specifications
Taurus Series Multimedia Player TB50 Specifications
Change History
Document Version Release Date Description
V1.0.2 2021-12-17 Updated the descriptions of the USB (Type B) port and Gigabit
Ethernet port.
Added the gross weight of the product.
Added a note for the power consumption.
Introduction
The TB50 is a new generation of multimedia player created by NovaStar for full-color LED displays. This multimedia
player integrates playback and sending capabilities, allowing users to publish content and control LED displays with a
computer, mobile phone, or tablet. Working with our superior cloud-based publishing and monitoring platforms, the
TB50 enables users to manage LED displays from an Internet-connected device anywhere, anytime.
Support for multi-screen synchronous playback and synchronous and asynchronous modes makes this multimedia
player a perfect fit for a wide range of applications.
Thanks to its reliability, ease of use, and intelligent control, the TB50 becomes a winning choice for commercial LED
displays and smart city applications such as fixed displays, lamp-post displays, chain store displays, advertisement
players, mirror displays, retail store displays, door head displays, shelf displays, and much more.
Certifications
NBTC, IMDA, PSB, FAC DoC, ENACOM, ICASA, SRRC, EAC DoC, EAC RoHS, RCM, UL Smark, CCC, FCC, UL, IC,
KC, CE, UKCA, CB, MIC, PSE, NOM
If the product does not have the relevant certifications required by the countries or regions where it is to be
sold, please contact NovaStar to confirm or address the problem. Otherwise, the customer shall be responsible
for the legal risks caused or NovaStar has the right to claim compensation.
Features
Output external source supports 32 kHz, 44.1 kHz, or
www.novastar.tech 1
Taurus Series Multimedia Player TB50 Specifications
Appearance
Front Panel
Name Description
www.novastar.tech 2
Taurus Series Multimedia Player TB50 Specifications
Name Description
Press and hold this button for 5 seconds to reset the product to its factory settings.
Rear Panel
Name Description
www.novastar.tech 3
Taurus Series Multimedia Player TB50 Specifications
Indicators
Name Color Status Description
SYS Green Flashing once every 2s The operating system is functioning normally.
CLOUD Green Staying on The TB50 is connected to the Internet and the connection
is available.
Flashing once every 2s The TB50 is connected to VNNOX and the connection is
available.
Flashing once every second The TB50 is upgrading the operating system.
Flashing once every 0.5s The TB50 is copying the upgrade package.
RUN Green Flashing once every second The FPGA has no video source.
Dimensions
www.novastar.tech 4
Taurus Series Multimedia Player TB50 Specifications
Specifications
Electrical Parameters Input power 100-240V~, 50/60Hz, 0.6A
Internal storage 16 GB
IP Rating IP20
Please prevent the product from water intrusion and do not wet or wash the product.
The amount of power consumption may vary depending on various factors such as product settings, usage, and
environment.
JPEG JFIF file 96×32 pixels to 817×8176 pixels JPG, No support for non-interlaced scan
format 1.02 JPEG
Support for SRGB JPEG
Support for Adobe RGB JPEG
www.novastar.tech 5
Taurus Series Multimedia Player TB50 Specifications
Video
MPEG-1/2 MPEG- 48×48 pixels to 30fps 80Mbps DAT, MPG, Support for field
1/2 1920×1088 pixels VOB, TS coding
MPEG-4 MPEG4 48×48 pixels to 30fps 38.4Mbps AVI, MKV, No support for
1920×1088 pixels MP4, MOV, MS MPEG4
3GP v1/v2/v3, GMC
H.264/AVC H.264 48×48 pixels to 2304p@60fps 80Mbps AVI, MKV, Support for field
4096×2304 pixels MP4, MOV, coding and
3GP, TS, MBAFF
FLV
H.265/HEVC H.265/ 64×64 pixels to 2304P@60fps 100Mbps MKV, MP4, Support for
HEVC 4096×2304 pixels MOV, TS Main Profile,
Tile & Slice
H.263 H.263 SQCIF (128×96) 30fps 38.4Mbps 3GP, MOV, No support for
MP4 H.263+
QCIF (176×144)
CIF (352×288)
4CIF (704×576)
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
www.novastar.tech 6
Taurus Series Multimedia Player TB50 Specifications
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
fonctionnement.
This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment.
Cet équipement est conforme à l'exposition aux rayonnements Industry Canada limites établies pour un
environnement non contrôlé.
www.novastar.tech 7
6. Material Safety Data Sheets
LG ELECTRONICS INC
LCD TV Division
222 LG-ro Jinwi-myeon Pyeongtaek-si 451-713 Gyeonggi-do Republic of Korea
2022-04-18
for the following products: This product meets all of the necessary
qualifications pursuant to:
Display
N/A
Brand: LG ENERGY STAR®: Program requirements for
Displays Version 8.0
Model Name: 19MB15T
00-VS-F0419, Version 6.0, This is to cer�fy that representa�ve samples of the Cer�fied Product(s) listed above have been inves�gated by UL to the Standard(s) indicated on this cer�ficate, in accordance with the UL Global Services Agreement and the EEC Terms & Condi�ons (“Agreement”). The
Cer�ficate Holder is en�tled to use the UL Energy Verified Mark for the Cer�fied Product(s) listed on the cer�ficate and manufactured at the production site(s) covered by the UL Test Report, in accordance with the terms of the Agreement. This Cer�ficate shall remain valid unless a Standard iden�fied on
this Cer�ficate is amended or withdrawn prior to that date or there is a non-compliance with the Agreement.
Type 2
LG ELECTRONICS INC
LCD TV Division
222 LG-ro Jinwi-myeon Pyeongtaek-si 451-713 Gyeonggi-do Republic of Korea
2022-04-13
for the following products: This product meets all of the necessary
qualifications pursuant to:
Display
N/A
Brand: LG ENERGY STAR®: Program requirements for
Displays Version 8.0
Model Name: 65UH5J
00-VS-F0419, Version 6.0, This is to certify that representative samples of the Certified Product(s) listed above have been investigated by UL to the Standard(s) indicated on this certificate, in accordance with the UL Global Services Agreement and the EEC Terms & Conditions (“Agreement”). The
Certificate Holder is entitled to use the UL Energy Verified Mark for the Certified Product(s) listed on the certificate and manufactured at the production site(s) covered by the UL Test Report, in accordance with the terms of the Agreement. This Certificate shall remain valid unless a Standard identified on
this Certificate is amended or withdrawn prior to that date or there is a non-compliance with the Agreement.
TYPE 3
TYPE 3
TYPE 3
TYPE 3
TYPE 3
TYPE 3
TYPE 3
8. Mill Certificate
DIC, Dubai
By
This detailed Method Statement was produced to ensure the Best Practice Guidance
the avoidance of hazards and the risks where reasonably practicable as per Local and
Federal Laws.
Scope of Works
This document covers the production and installation of Indoor LED & LCD Screen at
the mentioned location as per the drawings.
Programmed
Commencement:
Production: Within 3 days from the day of the approval
Site Completion: 10 days from the date of confirmation and all approvals.
DIC, Dubai
INSTALLATION INTRODUCTION
This method statement describes the procedures that will be employed to carry out the
necessary and associated works.
Signage details
SEQUENCE
SITE WORKS
➢ All risk zones will be identified, and adequate signage will be erected
to notify the public/and other personnel if applicable.
➢ On arriving at site all workers shall report to the site office to confirm
arrival and sign in (if applicable). All staff shall then attend a site-
specific briefing before commencing any works with the relevant
foreman. Operatives are to ascertain any information regarding
potential hazards.
➢ Ensure that all sign materials are stored neatly and safely in an
agreed area.
➢ The sign area to be cordoned off using safety cones and ribbons.
➢ The Main Sign Structure and all associated sub structure and graphic
panels will be assembled at site.
➢ Trenching of power cables from the power point (provided by client)
and making connections to the LED Screen
# Any accident is to be reported immediately to the office and authorities. All works will
be stopped until clearance is received to continue.
# Wear hand gloves, helmet, Safety glass, High Visibility Jacket, and safety shoe etc.
# Operating Area should be barricaded and prevented from any unauthorized entry to
that area.
# Adequate sign will be placed, and signal shall be given by a competent personal.
All personnel will be issued with the necessary PPE and will be expected to always
wear it on site. A special PPE will be issued as necessary in the hazardous locations
following site induction and or issue of a permit to work.
During site induction all personnel will be made aware of the client’s site rules, accident
reporting and site emergency procedures. These will be always adhered to. Worldwide
digital operatives will be familiar with the policies and procedures in place on projects
of this size, with knowledge gained from previous experience.
Emergency Contacts:
Mridul Coordinator 0588376903
Rabbani Project in charge 0551349756
Police 999
Ambulance 998
Fire 997
11. O & M Manual
M/s. Galaxy Metal Industries LLC guarantees that the above-mentioned Fabrication, Supply & Installation of
Wayfinding/Signage Works will meet the standards (as Proposed).
Any defects or failure proved attribute to the quality of materials and workmanship within a standard agreed
warranty period shall result in replacing the failed product, completely or free of charge commensurate with the
service life expired at the time of replacement.
This warranty shall not cover resulting where there is event of “force majeure” on causes beyond our control and
without the fault or negligence and which by exercise of the reasonable diligence M/s. Galaxy metal Industries LLC
was affected and unable to prevent the event or circumstances.
M/s. Galaxy Metal Industries LLC – (Fabrication, Supply & Installation of Wayfinding/Signage Works) obligation and
liabilities arising in connection with its products can only be limited to the replacement of the products and not to any
other costs or losses of whatever nature incurred by the Contractor or Client (including the cost of replacement
product).
Written notice of defective work will be given to M/s. Galaxy Metal Industries LLC. Should M/s. Galaxy Metal
Industries LLC fail to correct defective work within a reasonable time after receiving written notice, the Owner may,
at his option, correct defects and charge M/s. Galaxy Metal Industries LLC cost for such correction. M/s. Galaxy Metal
Industries LLC agrees to pay such charges upon demand.
countries.
'' Worldwide Digital (FZE) '' also can provide any technical supports to
kofi
Signature & Stamp Unilumin Group Co (Lamp) Worldwide Digital (FZE)
14. Reference Drawings
80 O.A.
3 (Typ.) 77
30
OF SIGN TO EDGE OF SIGN TO EDGE CL Sufficient tolerance to be calculated within
18
OF WALL / CORNER, TYP OF WALL / CORNER, TYP gasket in order to allow glass to be easily
189.5 1121 (O.A. Screen Active Area) 189.5
removed and reinstalled without binding.
GENERAL NOTES
CL A CL
Typical 50mm Wide 316 S/S two
60 10° piece Bracket Assembly fabricated
(From Finished Wall to Edge of Bracket) from 3mm thick flat bars cleanly
welded and angles as shown.
Finished Wall
Bracket Assembly to be secure by
475
3000 x 1500 x 2-6mm Laminated anchors to the existing wall as
Glass Assembly (Annealed) required.
ALL visible surfaces to be milled
3M¨ Scotchcal ElectroCut to match Stainless Steel Finish.
Graphic Film ‘Dusted Crystal’
(Product No. 7725SE-314)
3000 x 1500 x 2-6mm Laminated
to be applied on second surface of the
Glass Assembly (Annealed)
ﻧﺎﺋﺐ اﻟﻤﻌﺮض
PLACEHOLDER
glass.
EXHIBIT
اﻟﺘﻌﻠﻴﻢ ﻓﻀﺎﺋﻴﺔ SECTION A
SATELLITE EDUCATION
Screen Active Area must remain without
the Graphic Film.
rea)
2 ﻧﺎﺋﺐ اﻟﻤﻌﺮض 304
PLACEHOLDER
ctive A
EXHIBIT 2
)
. Glass
305
2925
306
A
ﻣﺎﻳﻮ15 - ﻳﻨﺎﻳﺮ14
A
n
75 O.A.
.
307
O
JANUARY 14-MAY 15
e e
(
r
0
O.A. Sc
300
10° ISSUE FOR CONSTRUCTION UPDATE - IFC 2 03-21-22
ﻧﺎﺋﺐ اﻟﻤﻌﺮض
PLACEHOLDER
ﻧﺎﺋﺐ اﻟﻤﻌﺮض
PLACEHOLDER
3000 x 1500 x 2-6mm Laminated C01
1-
1993 (
EXHIBIT EXHIBIT
Glass Assembly (Annealed) ISSUE FOR CONSTRUCTION 12-11-20
ﺷﺮﻓﺔ 34
TERRACE - ISSUE FOR TENDER - ADDENDUM 01 06-12-20
Concealed Typical ±50 Durometer Compression Pad
Power & Data as required. NO. ISSUE DESCRIPTION DATE
oulets by others. Sufficient tolerance to be calculated within PROJECT OWNER
gasket in order to allow glass to be easily
ﻧﺎﺋﺐ اﻟﻤﻌﺮض
PLACEHOLDER removed and reinstalled without binding.
EXHIBIT
ﻣﻌﻠﻮﻣﺎت/ ﺗﺬاﻛﺮ
TICKETS/INFORMATION
DEPARTMENT OF CULTURE
75 O.A.
Typical 316 S/S Base Block complete AND TOURISM
اﻟﺒﺮاﻣﺞ اﻟﻌﺎﻣﺔ with machined slot as show.
PUBLIC PROGRAMS ALL visible surfaces to be milled to
ﻣﺰﻳﺪ ﻣﻦ اﻟﺘﻔﺎﺻﻴﻞ Typical 90” match Stainless Steel Finish.
±40
CONSULTANTS
TEL: 310-482-3000
Finished Floor
CL CL CL CL
ARUP
ENGINEER
B
900 WILSHIRE BLVD., 19TH FLOOR LOS ANGELES, CALIFORNIA 90017 USA
±625 O.A.
TEL: 310-578-4400
190 370 380 370 190
SECTION B
ARUP GULF LTD
12TH FLOOR,
13mm ø ABU DHABI UNIVERSITY TOWER,
AL MUROOR STREET,
PO BOX 78907,
ABU DHABI, UNITED ARAB EMIRATES
PROJECT NAME
ZONE
PROJECT DESCRIPTION
ﻧﺎﺋﺐ اﻟﻤﻌﺮض
PLACEHOLDER
EXHIBIT
اﻟﺘﻌﻠﻴﻢ ﻓﻀﺎﺋﻴﺔ
SATELLITE EDUCATION
SIGN D1.1
302 ﺷﺮﻓﺔ
TERRACE
ﻣﺎﻳﻮ15 - ﻳﻨﺎﻳﺮ14
JANUARY 14-MAY 15 303 اﻟﺘﻌﻠﻴﻢ ﻓﻀﺎﺋﻴﺔ
SATELLITE EDUCATION
EXHIBITION DIRECTORY
PLACEHOLDER TERRACE
EXHIBIT 2
305
306
ELEVATOR
WASHROOMS
DRAWING NUMBER REVISION NO.
TEMPORARY MODEL
BEVERAGE BAR
ﻧﺎﺋﺐ اﻟﻤﻌﺮض
PLACEHOLDER
EXHIBIT
ﻣﻌﻠﻮﻣﺎت/ ﺗﺬاﻛﺮ
TICKETS/INFORMATION
Temporary model required, shall be constructed of white foamcore with
applied digital paper prints, representing the full size/dimensions of the G5-133 C01
1
sign, with a base or double-sided tape provided to ensure stability.
DATE SCALE
اﻟﺒﺮاﻣﺞ اﻟﻌﺎﻣﺔ
PUBLIC PROGRAMS
ﻣﺰﻳﺪ ﻣﻦ اﻟﺘﻔﺎﺻﻴﻞ
ﻓﻲ ﻣﻜﺘﺐ اﻟﻤﻌﻠﻮﻣﺎت
More detail at the information desk PROTOTYPE 1:100
Fabricator to provide full size prototype.
PROJECT ID PLAN ID
For exact sign graphic elements and text messaging (by location), refer OFFICIAL USE ONLY:
to the specific ‘Sign Drawings’ and ‘Sign Message Schedule’
Unless otherwise noted:
-All lighting effects to be consistent with no hot-spots and/or no shadows
to be cast
-All power cables to be concealed, where applicable.
SIGN TYPE D1.1 EXHIBITION DIRECTORY - GLASS PANEL/LED DISPLAY - FOH TYPICAL ELEVATION SCALE 1:20
KEY PLAN
80 O.A.
3 (Typ.) 77
1
Typical S/S threaded stud cleanly
welded to Bracket piece as shown.
Pre-drilled slotted holes to be
provided as shown.
625 1500 O.A. 625
Typical ±50 Durometer Compression
FROM EDGE FROM EDGE Pad as required.
375 750 375
30
OF SIGN TO EDGE OF SIGN TO EDGE CL Sufficient tolerance to be calculated within
18
OF WALL / CORNER, TYP OF WALL / CORNER, TYP gasket in order to allow glass to be easily
189.5 1121 (O.A. Screen Active Area) 189.5
removed and reinstalled without binding.
GENERAL NOTES
CL A CL
Typical 50mm Wide 316 S/S two
60 10° piece Bracket Assembly fabricated
(From Finished Wall to Edge of Bracket) from 3mm thick flat bars cleanly
welded and angles as shown.
Finished Wall
Bracket Assembly to be secure by
475
3000 x 1500 x 2-6mm Laminated anchors to the existing wall as
Glass Assembly (Annealed) required.
ALL visible surfaces to be milled
3M¨ Scotchcal ElectroCut to match Stainless Steel Finish.
Graphic Film ‘Dusted Crystal’
(Product No. 7725SE-314)
3000 x 1500 x 2-6mm Laminated
to be applied on second surface of the
Glass Assembly (Annealed)
glass.
SECTION A
Screen Active Area must remain without
the Graphic Film.
3000 (From Finished Floor to Top Edge of Glass)
ctive A
)
. Glass
2925
A
n
75 O.A.
O .
e e
(
r
0
O.A. Sc
300
10° ISSUE FOR CONSTRUCTION UPDATE - IFC 2 03-21-22
3000 x 1500 x 2-6mm Laminated C01
1-
1993 (
Glass Assembly (Annealed) ISSUE FOR CONSTRUCTION 12-11-20
LEGEND
34
- ISSUE FOR TENDER - ADDENDUM 01 06-12-20
YOU ARE HERE
ELEVATOR
Concealed Typical ±50 Durometer Compression Pad
WASHROOMS Power & Data as required. NO. ISSUE DESCRIPTION DATE
BEVERAGE BAR
oulets by others. Sufficient tolerance to be calculated within PROJECT OWNER
gasket in order to allow glass to be easily
removed and reinstalled without binding.
DEPARTMENT OF CULTURE
75 O.A.
Typical 316 S/S Base Block complete AND TOURISM
with machined slot as show.
ALL visible surfaces to be milled to
Typical 90” match Stainless Steel Finish.
±40
CONSULTANTS
TEL: 310-482-3000
Finished Floor
CL CL CL CL
ARUP
ENGINEER
B
900 WILSHIRE BLVD., 19TH FLOOR LOS ANGELES, CALIFORNIA 90017 USA
±625 O.A.
TEL: 310-578-4400
190 370 380 370 190
SECTION B
ARUP GULF LTD
12TH FLOOR,
13mm ø ABU DHABI UNIVERSITY TOWER,
AL MUROOR STREET,
PO BOX 78907,
ABU DHABI, UNITED ARAB EMIRATES
PROJECT NAME
ZONE
PROJECT DESCRIPTION
SATELLITE EDUCATION
SIGN D1.2
PLACEHOLDER EXHIBIT NAME
TERRACE
304
MAP DIRECTORY
PLACEHOLDER EXHIBIT NAME
TERRACE
306
LEGEND
TERRACE ELEVATOR
WASHROOMS
DRAWING NUMBER REVISION NO.
BEVERAGE BAR
TICKETS/INFORMATION
G5-134 C01
1
DATE SCALE
PUBLIC PROGRAMS
PROJECT ID PLAN ID
For exact sign graphic elements and text messaging (by location), refer OFFICIAL USE ONLY:
to the specific ‘Sign Drawings’ and ‘Sign Message Schedule’
Unless otherwise noted:
-All lighting effects to be consistent with no hot-spots and/or no shadows
to be cast
-All power cables to be concealed, where applicable.
SIGN TYPE D1.2 MAP DIRECTORY - GLASS PANEL - FOH TYPICAL ELEVATION SCALE 1:20
KEY PLAN
GENERAL NOTES
Sign A5.1
Tickets ID
60 in LED Displays
To be attached to back wall with
Bracket, as required.
PROJECT OWNER
DEPARTMENT OF CULTURE
AND TOURISM
PROJECT MANAGER
TURNER CONSTRUCTION
- INTERNATIONAL LLC
P.O. BOX 890, ABU DHABI, UAE
TEL: +971 2 6500 888
SIGN TYPE D3 EVENT DISPLAY @ TICKETS COUNTER TYPICAL INSTALLATION ELEVATION SCALE 1:20
CONSULTANTS
ARUP
ENGINEER
900 WILSHIRE BLVD., 19TH FLOOR LOS ANGELES, CALIFORNIA 90017 USA
TEL: 310-578-4400
Sign A5.1
Tickets ID
CONSULTANT-OF-RECORD
SDN1 P7
60 in LED Displays 60 in LED Displays 60 in LED Displays
To be attached to back wall with Bracket, To be attached to back wall with Bracket, To be attached to back wall with Bracket,
PROJECT DESCRIPTION
as required. as required. as required.
MODERN AND CONTEMPORARY ART
12 MUSEUM
TYPICAL
DRAWING TITLE
SIGN D3
EVENT DISPLAY AT COUNTERS
G5-135 C01
DATE SCALE
PROTOTYPE 1:100
Fabricator to provide LED display prototype.
PROJECT ID PLAN ID
For exact sign graphic elements and text messaging (by location), refer to OFFICIAL USE ONLY:
the specific ‘Sign Drawings’ and ‘Sign Message Schedule’
Unless otherwise noted:
-All lighting effects to be consistent with no hot-spots and/or no shadows to
be cast
-All power cables to be concealed, where applicable.
SIGN TYPE D3 EVENT DISPLAY @ TICKETS COUNTER MESSAGE VARIATIONS SCALE 1:20 SIGN TYPE D3 EVENT DISPLAY @ TICKETS COUNTER DETAILS SCALE 1:10
KEY PLAN
GENERAL NOTES
Sign A5.4
Check Room ID
60 in LED Displays
To be attached to back wall with
Bracket, as required.
EQ 2796 O.A. EQ
PROJECT OWNER
DEPARTMENT OF CULTURE
AND TOURISM
PROJECT MANAGER
TURNER CONSTRUCTION
- INTERNATIONAL LLC
P.O. BOX 890, ABU DHABI, UAE
TEL: +971 2 6500 888
SIGN TYPE D4 EVENT DISPLAY @ BAG CHECK ROOM ELEVATION SCALE 1:20
CONSULTANTS
ARUP
ENGINEER
900 WILSHIRE BLVD., 19TH FLOOR LOS ANGELES, CALIFORNIA 90017 USA
TEL: 310-578-4400
Sign A5.4
Check Room ID
CONSULTANT-OF-RECORD
ZONE
Bracket bolted to back wall, 60 in LED Display
828 O.A.
SDN1 P7
60 in LED Displays 60 in LED Displays
To be attached to back wall with Bracket, To be attached to back wall with Bracket,
PROJECT DESCRIPTION
as required. as required.
MODERN AND CONTEMPORARY ART
12 MUSEUM
TYPICAL
DRAWING TITLE
SIGN D4
EVENT DISPLAY @
BAG CHECK
G5-136 C01
DATE SCALE
PROTOTYPE 1:100
Fabricator to provide LED display prototype.
PROJECT ID PLAN ID
For exact sign graphic elements and text messaging (by location), refer to OFFICIAL USE ONLY:
the specific ‘Sign Drawings’ and ‘Sign Message Schedule’
Unless otherwise noted:
-All lighting effects to be consistent with no hot-spots and/or no shadows to
be cast
-All power cables to be concealed, where applicable.
SIGN TYPE D4 EVENT DISPLAY @ BAG CHECK ROOM DETAILS SCALE VARIES SIGN TYPE A5.4 CHECK ROOM ID DETAILS SCALE 1:10
KEY PLAN
GENERAL NOTES
Sign A5.3
Information Desk ID
Members ID
DEPARTMENT OF CULTURE
AND TOURISM
PROJECT MANAGER
TURNER CONSTRUCTION
- INTERNATIONAL LLC
P.O. BOX 890, ABU DHABI, UAE
TEL: +971 2 6500 888
ARUP
ENGINEER
900 WILSHIRE BLVD., 19TH FLOOR LOS ANGELES, CALIFORNIA 90017 USA
TEL: 310-578-4400
Sign A5.3
Information Desk ID
CONSULTANT-OF-RECORD
ZONE
Bracket bolted to back wall, 60 in LED Display
828 O.A.
SDN1 P7
60 in LED Displays 60 in LED Displays
To be attached to back wall with Brack- To be attached to back wall with
PROJECT DESCRIPTION
et, as required. Bracket, as required.
MODERN AND CONTEMPORARY ART
12 MUSEUM
TYPICAL
DRAWING TITLE
SIGN D4
EVENT DISPLAY @
INFORMATION DESK
G5-137 C01
DATE SCALE
PROTOTYPE 1:100
Fabricator to provide LED display prototype.
PROJECT ID PLAN ID
For exact sign graphic elements and text messaging (by location), refer to OFFICIAL USE ONLY:
the specific ‘Sign Drawings’ and ‘Sign Message Schedule’
Unless otherwise noted:
-All lighting effects to be consistent with no hot-spots and/or no shadows to
be cast
-All power cables to be concealed, where applicable.
SIGN TYPE D4 EVENT DISPLAY @ INFORMATION DESK DETAILS SCALE VARIES SIGN TYPE A5.4 CHECK ROOM ID DETAILS SCALE 1:10
KEY PLAN
GENERAL NOTES
368 O.A.
ART AFTER SCHOOL
4:00–6:15 PM
ورﺷﺔ
workshop
1325 F.F.
NO. ISSUE DESCRIPTION DATE
PROJECT OWNER
DEPARTMENT OF CULTURE
AND TOURISM
PROJECT MANAGER
TURNER CONSTRUCTION
- INTERNATIONAL LLC
P.O. BOX 890, ABU DHABI, UAE
TEL: +971 2 6500 888
ARUP
ENGINEER
900 WILSHIRE BLVD., 19TH FLOOR LOS ANGELES, CALIFORNIA 90017 USA
TEL: 310-578-4400
CONSULTANT-OF-RECORD
PROJECT NAME
28 384 28
ZONE
(Screen Active Area)
CULTURAL DISTRICT, SAADIYAT ISLAND
28
SDN1 P7
3mm Low Iron Glass panel with
opaque back painted border to be PROJECT DESCRIPTION
DRAWING TITLE
368 O.A.
SIGN D6
4:00–6:15 PM STUDIO LAB DISPLAY
G5-140
REVISION NO.
C01
workshop All power and data connections to be
located behind monitor with no exposed
connections. PROTOTYPE
DATE SCALE
1:100
Fabricator to provide full size prototype.
PROJECT ID PLAN ID
For exact sign graphic elements and text messaging (by location), refer to OFFICIAL USE ONLY:
FRONT VIEW SIDE VIEW the specific ‘Sign Drawings’ and ‘Sign Message Schedule’
Unless otherwise noted:
-All lighting effects to be consistent with no hot-spots and/or no shadows to
be cast
-All power cables to be concealed, where applicable.
Please complete this questionnaire for each product (signed & stamped), along with supporting documents listed in Section
D of this Questionnaire.
This questionnaire has been developed to ensure that proposed materials comply with the requirements of:
1. Project Sustainability Specifications
2. Estidama Pearl Building Rating Systems (PBRS) v1.0
NOTE THAT INCOMPLETE OR INCORRECTLY FILLED QUESTIONNAIRE AND NOT ATTACHING THE RELEVANT SUPPORTING DOCUMENTS, AS REQUESTED, WILL
RESULT IN REJECTION OF THE MATERIAL SUBMITTAL.
A. GENERAL INFORMATION
Material Description: Digital Screens / Display
Manufacturer name and location(s): LG – Korea and LAMP China
Document
Credit Required Documents Attached
Applicable Materials Remarks
Ref. (To be attached along with this questionnaire)
Yes No NA
CLIENT
Indoor P2.5
42 Square Meter
Mall of Emirates
INDOOR P2 & P2.5 LED SCREEN
CLIENT
CLIENT
Indoor P2.5
125 Square Meter
Installed in Multi Locations
INDOOR P2.5 LED SCREEN
CLIENT
Indoor P2.5
07 Square Meter
Installed in Dubai Mall
INDOOR P1.8 LED SCREEN
CLIENT
Indoor P2.5
12 Square Meter
Installed in Burj Al Arab
INDOOR LED SCREEN
Indoor P2.5
Indoor P2.5 Flexible 9.0 Square Meter
5.1 Square Meter DWTC
Manara Mall RAK
Solution for Growing Business
21. Accreditation Certificates