Professional Documents
Culture Documents
Ficha Tecnica Tampa
Ficha Tecnica Tampa
Description
Straight metal cover, width of 200 mm, intended to cover the straight sections of the Rejiband® wire mesh trays, Pemsaband® or Inducanal® sheet metal trays and
Megaband® ladder for cable protection. Press t (without screws or xings). The cover remains xed, even in a vertical position. It has an overlap extension on the
end that improves the coupling and sealing of two straight sections of the cover. Made of steel, finished in pre galvanised PG.
Advantages
Optimum adjustment on the metal trays giving them a greater protection.
Simple access to specific areas in the case of having to make any changes within the electrical installation.
If the cover is combined with the sheet metal tray, it becomes an IP2X protected channel for Pemsaband® and IP4X for Inducanal®.
Applications
Recommended for the protection of electrical and telecommunications wiring housed in Rejiband®, Pemsaband® and Megaband® trays in electrical and
telecommunications installations in public buildings, infrastructure and civil works, industrial installation or tertiary sector.
Solutions
www.pemsa-rejiband.com
Any information included in this document is property of Pemsa®. It cannot be copied, total or partially, nor disclosed to third parties nor used without the explicit and written authorization by Pemsa®. These documents
total or partially, can be subject to patent and/or be patent pending and therefore protected by intellectual and industrial property rights. Pemsa, Rejiband, Pemsaband, Inducanal, Rejitech, Megaband, Pemsaflex are registered
trademarks property of "Pemsa Cable Management, S.A."
DATA SHEET
Product data
Finish P.G. m 12 m
Coatings
EZ - Electrogalvanized, white, according to EN ISO 2081. Class 3 protection in compliance with product standard EN 61537. Electrolytic zinc protection adequate for indoor installations.
BC - Electrogalvanized Bycro, yellow, in compliance with EN ISO 2081. Class 4 protection in compliance with product standard EN 61537. Improved resistance to corrosion, especially adequate for demanding indoor
installations.
GC - Hot-dipped galvanizing in compliance with EN ISO 1461. Class 6 protection in compliance with product standard EN 61537. Appropriate for outdoor installations and aggressive environments.
BLACK C8 - High Resistance coating, Black Colour. Class 8 of protection in compliance with product standard EN 61537. Neutral Salt Spray Chamber test >1000 h acc. to ISO 9227.
304 and 316L stainless steel, in compliance with EN 10088 standard, with passivated Thermicron treatment. Class 9 protection. Appropriate for outdoor installations and highly aggressive environments.
www.pemsa-rejiband.com
Any information included in this document is property of Pemsa®. It cannot be copied, total or partially, nor disclosed to third parties nor used without the explicit and written authorization by Pemsa®. These documents
total or partially, can be subject to patent and/or be patent pending and therefore protected by intellectual and industrial property rights. Pemsa, Rejiband, Pemsaband, Inducanal, Rejitech, Megaband, Pemsaflex are registered
trademarks property of "Pemsa Cable Management, S.A."
DATA SHEET
Product applications
www.pemsa-rejiband.com
Any information included in this document is property of Pemsa®. It cannot be copied, total or partially, nor disclosed to third parties nor used without the explicit and written authorization by Pemsa®. These documents
total or partially, can be subject to patent and/or be patent pending and therefore protected by intellectual and industrial property rights. Pemsa, Rejiband, Pemsaband, Inducanal, Rejitech, Megaband, Pemsaflex are registered
trademarks property of "Pemsa Cable Management, S.A."