Professional Documents
Culture Documents
Experiment 05
Experiment 05
Circuit Diagrams:
Port1 Port1
Port2
Port2
Fig. 1 Fig. 2
Required Components:
IC 7400 (NAND) 1 Trainer Board 1
IC 7402 (NOR) 1 Digital Oscilloscope 1
Digital Multimeter 1
Procedure:
1. Set up circuit as shown in figure 1.
2. Apply 0V and/or 5V as input to port 1 and port 2.
3. Measure output voltages at Q and Q’ for all input combinations.
4. Set up circuit as shown in figure 2.
5. Repeat steps 2 to 3.
Experimental Data
Table
Port1 Port2 Q Q’
0V 0V
0V 5V
5V 0V
5V 5V
Analyze:
1. Analyze which port is acting as SET and which port is acting as RESET input for both the
circuits and explain why.
2. Analyze why circuit in fig 1 is called Active-HIGH and fig 2 is Active-LOW.