Professional Documents
Culture Documents
Finaldigproj
Finaldigproj
2023
19ECE282
DIGITAL ELECTRONICS AND SYSTEMS LABORATORY
2023 – 2024 (Odd Semester)
PROJECT REPORT
Submitted by :
1. Midun, CB.EN.U4ECE22032
2. Mrinashri , CB.EN.U4ECE22033
3. Naren Aditya, CB.EN.U4ECE22034
Table of Contents
QUESTION:
Design a combinational circuit that operates an alarm in a car whenever the driver and
passenger seats are occupied, and the seat belts are not fastened when the car is started.
The active high signals drive, passenger 01, passenger 02, indicates the presence of
drivers and passengers respectively and are taken by pressure activated switches in the
seat. The signal IGN is active high when the ignition is ON. The signal BD’ and BP’ are
active low representing the drivers seat belt and passengers seat belts are fastened. The
alarm will be activated when the car is started.
COMPONENTS USED:
1. Breadboard
2. IC7404(NOT)
3. IC7408(AND)
4. IC7432(OR)
5. Buzzer
6. Light Emitting Diode
7. Resistor(1KΩ)
8. Connecting Wires
9. Digital IC Trainer
DETAILS OF HARDWARE:
IC7404 Pin Diagram (NOT GATE):
Resistor(1KΩ):
A 1k resistor is a resistor with a resistance of 1,000 ohms. It is commonly used in electronic circuits to limit the
flow of current.
LEDs, or light-emitting diodes, are semiconductor devices that convert electrical energy into light. They are
highly energy-efficient, long-lasting, and versatile, making them a popular choice for a variety of applications.
Buzzer:
An electromechanical device that produces a buzzing sound when activated also commonly used to provide
audible feedback in electronic devices and systems.
TRUTH TABLE:
K-MAP:
SIMULATION RESULTS:
CB.EN.U4ECE22033 :
CB.EN.U4ECE22034:
CB.EN.U4ECE22032
Possible outputs :
CASE 1:
CASE 2:
CASE 3: