Professional Documents
Culture Documents
Tech Notes - Installing Spinnaker Drivers For Flexscan3D
Tech Notes - Installing Spinnaker Drivers For Flexscan3D
Log In
3.3.10.x 1.15.0.63
Instructions
https://www.polyga.com/tech-notes/installing-spinnaker-drivers-for-flexscan3d/ 1/5
6/20/23, 2:15 PM Tech Notes - Installing Spinnaker Drivers for Flexscan3D
You will need internet connection for this installation. For an offline installer, visit https://www.ptgrey.com/Downloads.
Shop
Now
Let's
Talk
3. When selecting components, ensure that under Visual Studio Version, only Visual Studio 2013 is selected.
https://www.polyga.com/tech-notes/installing-spinnaker-drivers-for-flexscan3d/ 2/5
6/20/23, 2:15 PM Tech Notes - Installing Spinnaker Drivers for Flexscan3D
Shop
Now
Let's
Talk
4. After the installation is complete, confirm that the drivers work by opening your cameras in SpinView
https://www.polyga.com/tech-notes/installing-spinnaker-drivers-for-flexscan3d/ 3/5
6/20/23, 2:15 PM Tech Notes - Installing Spinnaker Drivers for Flexscan3D
Shop
Now
Let's
Talk
You should now be ready to get started with Spinnaker in Flexscan3D. Create a new HDI Advance and, when selecting cameras,
Spinnaker should now appear in the drop-down menu.
PREVIOUS NEXT
https://www.polyga.com/tech-notes/installing-spinnaker-drivers-for-flexscan3d/ 4/5