Professional Documents
Culture Documents
3 Ply Carton Machine Quotation
3 Ply Carton Machine Quotation
用途特点
Function and Trait:
单面瓦楞机组由卷筒纸支架(电动,液压可选),单面瓦楞机,甩刀机组合的半自动生产线,
以卷筒纸为材料可连续生产并剪切成所需规格的单面瓦楞纸。具有生产流程先进、效率高、批
量适应性强、劳动条件好等特点。
web support (electric or hydraulic), single-facer corrugated machine and sheet cutter
单面瓦楞纸生产线适用于将卷筒纸加工生产成单面瓦楞纸并剪切成所需规格的单面瓦楞纸。具
有生产流程先进、效率高、批量适应性强、劳动条件好等特点。
single-sided corrugated paper from web paper and cutting it into single-sided
技术参数
Technical parameters
型号 Model DW-M-1000
工作速度 80-100m/min
working speed
瓦楞辊直径 280mm
1. Single knife sheet cutter can do set-length cutting reel paper and single facer board, change order
fast, high cutting precision, fast work speed, low waste, it also suit for color-printing box package.
2. The machine adopts PLC with touch screen operate design, operator can know detailed work status.
3. Adopts variable frequency motor reduce the fault caused by transmission wearing.
4. Computer restore many production orders, human-machine interface
5. Use high quality variable frequency motor.
6.teeth surface be quenching and grinding, high precision transmission, low noise, transmission part
lubrication adopts oil pump automatic recycle design.
7. Used high speed flat type knife, high hardness with long use life. Precision adjustable gapless gear
ensure accurate mesh, good cutting with high straightness, protect knife
Technology Parameter:
1.Design speed:70m/min
2.Working speed:0-70m/min
3.Cutting length:300-9999mm cutting precision:±1.5mm
4.Effect width:1000mm
5.Cutting layer: single layer、double layer
Automatic stacker
1. The Max. Speed of coloection paper:70m/min
3.This machine can be collected at the same time at most 4 pieces of paper
4.The machine can realize count automatically, automatic stacking, automatic stamping
5.Stacker hight:100mm
7.The automatic stacking machine cost is low,Small footprint, save manpower,Is the
8.floor area:3.5*1.9m
BJ-1200 裱胶机
(4)
缝钢管经精研磨镀硬铬处理。具有精密度高,耐磨损的优点。
The gluing machine used for gluing on various sheets that produced by single
facer. All or rollers used of good quality stepless steel pipe with accurately
Printing unit
Printing roller, paper feeding roller, pressure roller, all the surfaces grinding, hard chromium plating。
Adopt planet style electrical adjustment of 360 degrees whatever operating and stopping, quickly
and accurately.
Motorized shift and pneumatic locking up of printing units.
Inking roller can be detached from printing plate automatically to avoid damage the printing plate.
Inking roller equipped idling running device to prevent ink from being dried when machine stop.
Pneumatic lifting and down the anilox roller, auto ink distributing.
With Pneumatic diaphragm pump to supply ink.
Main transmission gears are made by 45#steel after high frequency quenching.
Drive part adopts spray lubricating system, improve the precision and serve life of machine.
Main shafts connect with gear used no-key connect(ringfeder), so keep shaft running stably.
Transmission part adopts automatic spray lubraction system, improve machine use time and
precision.
All gears adopt cross slide head to perform no gap adjustment, printing accurately.
Manual adjustment of the printing roll axial position 15mm.
Printing precision±0.50 ㎜(when the paper board is plane and smooth).
Auto count device properly controls production volume..
Slotting unit
The slotting knives pedestal can be worm-type adjustment according to the thickness of card board. ( Three & Five
layer only).
The slitting knives pedestal can be worm-type adjustment according to the thickness of card board. ( Three & Five
layer only).
The back slotting knife (Height of the box) Four knives adjustment synchronous, easy working.
Electric adjustment Printing phase and slotting position.
7mm alloy steel slotting knives with indent heat treatment to enable grinding teeth sharp edge.
Option: Slotting and crease joint movement by hand or motorized control
Hand hole device
Main Technology Parameters
型号 Model 2200
Roller diameter
Φ324
版辊直径(mm)
Max sheet size
1000×2200
最大过纸尺寸(mm)
Max printing size
1000×2000
最大印刷尺寸(mm)
Min sheet size
320×500
最小过纸尺寸(mm)
Min slot space
190×50×190×50
最小开槽间隙(mm)
Working speed
0-60
工作速度(片 pcs/min)
Printing precision
±0.5
印刷精度(mm)
Standard plate thickness
6
标准印版厚度(mm)
Sheet thickness
1.2-9
过纸厚度(mm)
Power 功率(kw)
(8)ZXJ-2400 半自动粘箱机
ZXJ-2400 Semi-automatic folder &gluer
技术参数 Technology Parameter