This document provides technical specifications for a double page spread, including dimensions for trim size, bleed, and type area. It instructs to supply the pages as two separate PDFs labeled "Left" and "Right" with 5mm bleed and crop marks. Important information should be at least 20mm from the center line, and a low-resolution proof should be provided along with the files without any gutter bleed added to the trim area.
This document provides technical specifications for a double page spread, including dimensions for trim size, bleed, and type area. It instructs to supply the pages as two separate PDFs labeled "Left" and "Right" with 5mm bleed and crop marks. Important information should be at least 20mm from the center line, and a low-resolution proof should be provided along with the files without any gutter bleed added to the trim area.
This document provides technical specifications for a double page spread, including dimensions for trim size, bleed, and type area. It instructs to supply the pages as two separate PDFs labeled "Left" and "Right" with 5mm bleed and crop marks. Important information should be at least 20mm from the center line, and a low-resolution proof should be provided along with the files without any gutter bleed added to the trim area.
Details Height Width Bleed Trim 297mm 210mm 5mm Bleed 303mm 216mm Type Area 277mm 190mm
Technical Specs Double Page Spread Colour 1.2
1) Supply as Two Full Page single PDFs With 5 mm bleed 2) Clearly mark each PDF as Left or Right FPC as the case maybe 3) Include clear crop marks 4) When creating a double-page spread, please keep all important information 20mm from the centre line due to binding. 5) Low-resolution proof should be provided together 6) Do not add grind off /gutter bleed to the trim, the two pages should butt up (n.b this is not the same as gutter allowance which is part of the trimmed page). 7) Where it is essential that detail within the picture itself presents a single image across the spine gutter when perfect bound, then the picture image should be duplicated across the center line for 5mm each side (i.e. 10mm in all)