This document summarizes the calculation of pile capacity for a single pile supporting a 10-story building in Chittagong, Bangladesh. Using the Standard Penetration Test results and Meyerhof's equation, the ultimate pile capacity is calculated as 261 tons for thrust and 53.9 tons for uplift. With safety factors of 4 and 2.5 applied, the allowable capacities are 65 tons for thrust and 21.6 tons for uplift (or 638 kN and 211.4 kN). It is then checked that the calculated pile capacities exceed the demand from the tower thrust, weight, and uplift.
This document summarizes the calculation of pile capacity for a single pile supporting a 10-story building in Chittagong, Bangladesh. Using the Standard Penetration Test results and Meyerhof's equation, the ultimate pile capacity is calculated as 261 tons for thrust and 53.9 tons for uplift. With safety factors of 4 and 2.5 applied, the allowable capacities are 65 tons for thrust and 21.6 tons for uplift (or 638 kN and 211.4 kN). It is then checked that the calculated pile capacities exceed the demand from the tower thrust, weight, and uplift.
This document summarizes the calculation of pile capacity for a single pile supporting a 10-story building in Chittagong, Bangladesh. Using the Standard Penetration Test results and Meyerhof's equation, the ultimate pile capacity is calculated as 261 tons for thrust and 53.9 tons for uplift. With safety factors of 4 and 2.5 applied, the allowable capacities are 65 tons for thrust and 21.6 tons for uplift (or 638 kN and 211.4 kN). It is then checked that the calculated pile capacities exceed the demand from the tower thrust, weight, and uplift.