Professional Documents
Culture Documents
Ci Scsi 09 Operation
Ci Scsi 09 Operation
DUPLO CORPORATION
Introduction
Thank you for your purchase of the PC interface kit BOX.
To ensure safe and efficient prolonged use of this machine, read and thoroughly understand this manual before
using this machine. After using this manual, be sure to keep it in a place to handy reference.
When there is the most recent information about the PC interface kit BOX, it is included in “README.TXT”
1
in the printer driver disk. Please be sure to read it too.
PLEASE NOTE
In the interest of upgrading our products, specifications and other data given in this manual are subject to
change without notice. If the manual contains anything that you do not understand, contact the manufac-
turer for clarification.
1
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Contents
Introduction ......................................................................................................................... 1
Notes on Safety (Please Read and Observe) ................................................................... 3
Safety Precautions .............................................................................................. 3
Printing and Duplicating Cautions .............................................................................. 6
Outline for Printing ...................................................................................................... 7
Conventions Used in This Manual .............................................................................. 8
Chapter 1 Preparation of Hardware
Preparation of Duprinter .................................................................................................. 10
Before installing PC interface kit BOX ...................................................................... 10
Contents of the kit .................................................................................................... 11
Attaching Interface kit BOX ...................................................................................... 12
Setting Duprinter ...................................................................................................... 17
Setting PC interface PCB BOX unit & confirming operation ..................................... 20
Preparation of PC ............................................................................................................. 22
Windows 3.1 ............................................................................................................. 22
Windows 95, Windows 98 ........................................................................................ 23
Windows NT4.0, Windows 2000 ............................................................................... 25
Macintosh ................................................................................................................. 26
Connection of PC & Duprinter ......................................................................................... 27
Connection at the Duprinter side .............................................................................. 27
Chapter 2 Installation of Software
Installation of Printer Driver ............................................................................................ 34
Parallel Connection ....................................................................................................... 34
Installing in Windows 95 or Windows 98 .................................................................. 34
USB Connection ............................................................................................................ 36
Installing in Windows 98 ........................................................................................... 36
SCSI Connection ........................................................................................................... 39
Installing in Windows 3.1 .......................................................................................... 39
Installing in Windows 95 ........................................................................................... 41
Installing in Windows 98 ........................................................................................... 46
Installing in Windows NT4.0 ..................................................................................... 50
Installing in Windows 2000 ....................................................................................... 55
Installing in Macintosh .............................................................................................. 61
Installation when using a network .................................................................................. 63
Installing in Windows 95 or Windows 98 .................................................................. 63
Chapter 3 Printing
Settings and operation of printing .................................................................................. 70
USB/Parallel Connection .............................................................................................. 70
Windows 95, Windows 98 ........................................................................................ 70
SCSI Connection ........................................................................................................... 74
Windows 3.1 ............................................................................................................. 74
Windows 95, Windows 98, Windows NT4.0 and Windows 2000 .............................. 76
Macintosh ................................................................................................................. 82
Chapter 4 Customizing
Customizing Printer Driver .............................................................................................. 88
Windows 95, Windows 98 ........................................................................................ 88
Windows NT4.0, Windows 2000 ............................................................................... 89
Macintosh ................................................................................................................. 90
Chapter 5 Trouble Shooting
Trouble shooting ............................................................................................................... 94
SCSI Connection ........................................................................................................... 95
Windows 3.1 ............................................................................................................. 95
Windows 95, Windows 98, Windows NT4.0 and Windows 2000 .............................. 97
Macintosh ............................................................................................................... 102
2
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Indicates a high degree of potential danger. If the warning is ignored, death or serious
1
WARNING injury may result.
2
Indicates a medium degree of potential danger. If the caution is ignored, medium injury or
CAUTION damage to property may result.
• These are particularly important safety points and should always be observed.
WARNING
If the machine is used after foreign matter (metal fragments, water, or liquid) has entered the
machine, this may result in fire or electric shock.
• Turn the main unit’s power switch OFF, and then remove the power plug from the outlet. Contact
the sales distributor.
If the machine is used after heat, smoke, strange smell, or other abnormality is detected, this may
result in fire or electric shock.
• Turn the main unit’s power switch OFF, and then remove the power plug from the outlet. Contact
the sales distributor.
Do not remove the rear lid, cabinet, or covers from the machine.
• The inside of the machine contains high-voltage parts, which may cause electric shock.
3
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
WARNING
Do not insert or drop metal, flammable material, or other matter through the ventilation holes into
the machine interior.
• Doing so may result in fire or electric shock.
Do not use a source voltage other than that specified. Do not connect two or more loads to a single
outlet.
• Doing so may result in fire or electric shock.
4
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
CAUTION
Before moving the machine, remove the power plug from the outlet.
• If the cord is damaged, this may result in fire or electric shock.
1
Remove the power plug itself, not the cord.
• Tugging the cord may damage it (expose conductors, or cause disconnections, etc.), resulting in
fire or electric shock. 2
5
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
3. Copyrighted Materials
Books, music, artwork, prints, maps, diagrams, movies, photography, etc. are banned from duplicating outside the
limits of private home use and their related non-sale usage.
6
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
USB/parallel connection
1. Connect Duprinter and PC
2
2. Install the printer driver
SCSI Connection
Windows 3.1
1. Prepare PC
2. Set up SCSI Host Adapter
SCSI Host Adapter settings
SCSI Driver installation
ASPI Driver (Manager) installation
3. Connect Duprinter and PC
4. Install Duplo SCSI Printer Driver
Windows NT4.0
1. Prepare PC
2. Set up SCSI Host Adapter
SCSI Host Adapter settings
SCSI driver installation
3. Connect Duprinter and PC
4. Install Duplo SCSI Printer DRIVER for Windows NT4.0
Windows 2000
1. Prepare PC
2. Set up SCSI Host Adapter
SCSI Host Adapter settings
SCSI driver installation
3. Connect Duprinter and PC
4. Install Duplo SCSI Printer DRIVER for Windows NT4.0
Macintosh
1. Prepare PC.
2. Connect Duprinter and PC
3. Install Duplo SCSI Printer DRIVER for Macitosh
7
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Printing procedure
IMPORTANT
● Settings in Duprinter
• In DDP system printing, specifications settable on the control panel of Duprinter are Printing
speed, Printing position, Paper size and sorter selection.
• Do not choose multiple printing or book shade erasure mode, for they may cause printing
interrupted or the center part of image masked.
Printing procedure differs according to the application software in use. Refer to the instruction manual of each
application software. Major procedure is as follows: e.g. With the attached "WordPad".
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Description of operational steps Click [File] in the menu bar and click [Print...]
command.
Each step is described in detail.
Illustrations
The illustrations provide a visual
reference to which keys to operate ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
70
Continue Page • • • : Indicates that the description of the operating sequence is continued on the next page.
8
Chapter 1
1
Preparation of Hardware
Preparation of Hardware
The following items are described in this chapter.
• Installation procedure of PC interface kit BOX to Duprinter
• Settings of Duprinter
• Connection of PC and Duprinter
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
IMPORTANT
● Precautions before installation
– Installation –
• Make sure that Duprinter is installed before installing PC interface kit BOX.
• Pull out the power plug of the Duprinter from the point before installing PC interface kit BOX.
• Make sure to use right screws in right position.
– Requirements to use Duprinter–
q Duprinter models and ROM version
The PC Interface Kit BOX cannot be used depending the ROM version in Duprinter.
In this case, please upgrade the ROM version. ROM version can be confirmed in HELP
mode (H-00). Refer to the service manual for details.
10
Preparation of Duprinter
12
4 1
10
11 9
Preparation of Hardware
6
16
5 1
19
18 13
21
20 17 15
14
25
8 3
24
23 7
22 2
11
Preparation of Duprinter
screws
screws
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
screws
screws
screws
DP-43SF
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
12
Preparation of Duprinter
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Open the ejected plate box and take off the two
PCB box fixing screws.
The two fixing screws are re-used.
screws
1
Preparation of Hardware
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
■ For DP-43 Series, DP-33 Series, DP-31 Series, and DP-63 Series
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Insulock tie
Cord band
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Continue Page • • •
13
Preparation of Duprinter
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
screws
OBC
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
PC interface
screws BOX Unit
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
CN2 CN1
Connect the On-line cord to the PC Interface
BOX unit.
Connect the 16-pin connector of the On-line cord to CN2
(16-pin) on the PC Interface BOX unit and the 4-pin connec-
tor of the On-line cord, to CN1 (4-pin) on the PC Interface
BOX unit.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
screws
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
14
Preparation of Duprinter
■ For DP-43SF
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Run the On-line cord through the opening of opening On-line cord
the frame and fix the On-line cord with three
cord bands.
Bundle them with Insulock tie to remove the slack. 1
Preparation of Hardware
Insulock tie Cord
band
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
OBC
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
On-line cord
screws
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
CN1 CN2
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Continue Page • • •
15
Preparation of Duprinter
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
screws
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
16
Preparation of Duprinter
Setting Duprinter
Set so that the PC Interface Kit BOX can be used with the Duprinter.
q Enter the HELP mode [H-73] of the printer and press the
1
key.
w Enter a four-digit number using 0 and 1 keys of the ten-key board and change the settings (refer to the
following table).
Preparation of Hardware
Setting display
ABCD Item Setting
**1 * Switching interface kit
When the PC Interface Kit BOX (external installation) is connected
**0 * When the PC Interface Kit (built-in) is connected
(1) Connection
1)USB connection
Up to 15 Duprinters can be connected with the USB connection. Attach the USB ID to the Duprinter when
connecting two or more devices.
Be sure not to specify a USB ID to two or more devices.
q Enter the HELP mode [H-74] of the printer and press the key.
w Enter a four-digit number using 0 and 1 keys of the ten-key board and change the settings (refer to the
following table).
Setting display
ABCD Item Setting
0000
1
0001
0010 2
0011 3
0100 4
0101 5
0110 6
0111 7
Setting of USB ID
1000 8
1001 9
1010 A
1011 B
1100 C
1101 D
1110 E
1111 F
17
Preparation of Duprinter
●While storing
2)SCSI connection
Connect with SCSI in Windows95 system.
• In the case of the initial version (4.00.950) and A version (4.00.950a) of Windows95, set to [Scanner].
In the case of B version (4.00.950B) and C version (4.00.950c), set to [Printer].
• You can confirm the version of Windows95 in the [System properties] window ([Control panel] →
[System]).
• If IOS.VXD of Windows95 is defective and a SCSI printer is connected and turned on when Windows95 is
started, the IOS.VXD will cause serious and exceptional error. To prevent this, there are two measures.
1. Set the ID code of the Duprinter to [Scanner].
→ Set HELP-57 to ***1.
2. Download the updated IOS.VXD from the Microsoft homepage.
1)Adjusting the start position for online transverse plate making (operation side)
q Enter the HELP mode [H-53] of the printer and press the key.
w Enter a four-digit number using 0 and 1 keys of the ten-key board and change the settings (refer to the
following table).
Setting display
18
Preparation of Duprinter
Preparation of Hardware
*1 0 1
*1 10
*1 1 1 Maximum
●While storing
Setting display
●While storing
19
Preparation of Duprinter
CN2 CN1
Communication LED
Plate-making LED
CPU OK LED
SCSI IN
Constantly OFF
Centronics
EP-ROM socket
ON
20
Preparation of Duprinter
If printing is not performed properly, confirm the connection of cables and connectors.
If printing is performed properly, the attachment of PC interface kit BOX unit is completed. Turn back the SCSI-ID. 1
21
Preparation of PC
Prepare PC (Windows 3.1, Windows 95, Windows 98, Windows NT4.0, Windows 2000 or Macintosh). Set up SCSI and
systems.
Windows 3.1
The preparation of PC, when the DDP system is configured with Windows 3.1, is described here.
System requirements
Requirements on hardware to be used is as follows:
Operating system : Windows 3.1
SCSI Host Adapter: Adaptec is recommended
CPU : 80386/16MHz ↑ (80486/25MHz ↑ is recommended )
Memory : Normal memory in use +8MB ↑
Hard disk capacity : 10MB ↑
Display : Resolution of VGA (640×480 Pixel) ↑
Floppy disk drive : 3.5inch floppy disk drive
It may require more memory and hard disk capacity for some document data.
Duprinter complies with the 300 dpi and 400 dpi models.
(1) Preparation
q Computer
w SCSI host adapter
e Windows 3.1 version SCSI Driver
r Windows 3.1 version ASPI Driver (Manager)
(4) After installing SCSI Host adapter and Driver software, Confirm the PC works
properly
If any problems such as ‘does not start’ ‘ does not operate properly’ ‘Driver cannot be installed’ etc. is ob-
served, interruption (IRQ, INT) or I/O port may be overlapped. In this case, the interruption of SCSI Host
Adapter or other devices and I/O ports need to be reset so that they do not overlap.
Please refer to the instruction manual of SCSI host adapter for details.
22
Preparation of PC
■ Parallel Connection
System requirements
1
Preparation of Hardware
Requirements on hardware to be used are as follows:
Operating system : Windows 95, Windows 98
IPM PC on which the above two OSs run normally, or perfectly
compatible machines
Memory : 32 MB or more
(It may require more memory depending on applications to be used.)
(1) Preparation
q Connecting cable : IEEE1284 printer cable (sold separately)
Specification : D-sub 25 pin male - Centronics 36 pin male
■ USB Connection
System requirements
Requirements on hardware to be used are as follows:
Operating system : Windows 98
IPM PC on which the above OS runs normally, or perfectly compatible
machines equipped with the USB port and performance guaranteed by
its manufacturer.
*Some machines may cause partial malfunction of USB.
Memory : 32 MB or more
(It may require more memory depending on applications to be used.)
(1) Preparation
q Connecting cable : USB cable (sold separately)
Specification : USB connector series A-USB connector series B
23
Preparation of PC
■ SCSI Connection
System requirements
Requirements on hardware to be used are as follows:
Operating system : Windows 95, Windows 98
SCSI Host Adapter : Adaptec is recommended.
CPU : i486SX or later
Memory : Normal memory in use + 8 MB or more
Hard disk capacity : 10 MB or more
Display : Resolution of VGA (640 x 480 Pixel) or more
Floppy disk drive : 3.5 inch floppy disk drive
It may require more memory and hard disk capacity for some document data to be printed.
(1) Preparation
q Computer (Windows 95, Windows 98)
w SCSI Host Adapter
e Connection cable : SCSI cable [Name: Interface cable : Pin-pin/4M L1-W1190 Model] (sold separately)
24
Preparation of PC
System requirements
Requirements on hardware to be used are as follows:
1
Operating system : Windows NT4.0 Service Pack 3 or later, Windows 2000
Preparation of Hardware
SCSI Host Adapter : Adaptec SCSI Host Adapter
CPU : Pentium II 350 MHz or later
Memory : 64 MB or more (It requires more memory depending on applications to
be used.)
ASPI layer : Version 4.57 or later (attached to the Adaptec EZ-SCSI)
(1) Preparation
q Computer (Windows NT4.0, Windows 2000)
w SCSI Host Adapter
e Connection cable : SCSI cable [Name: Interface cable: Pin-pin/4M L1-W1190 Model] (sold separately)
25
Preparation of PC
Macintosh
The preparation of a computer, when the DDP system is configured with a Macintosh computer, is described
here.
System requirements
Requirements on hardware to be used are as follows:
The following systems have been confirmed operational as of 1 October 2000.
Macintosh Centris 610 Power Macintosh 6100
Macintosh Quadra 800 Power Macintosh 7100
Macintosh Quadra 840AV Power Macintosh 7200
Macintosh Quadra 900 Power Macintosh 7500
Macintosh Quadra 950 Power Macintosh 7600
Macintosh Performa 5220 Power Macintosh 8100
Macintosh PowerBook 1400 Power Macintosh 8500
Macintosh PowerBook 5300 Power Macintosh 8600
Power Macintosh 9500
Power Macintosh 9600
Power Macintosh G3
Power Macintosh G4
Operating environment
Kanji Talk 7 or later, MacOS7.6.1 or later
Normal memory in use + 8 MB or more
Hard disk system
3.5-inch floppy disk drive
• It may require more memory and hard disk capacity for some document data to be printed.
• To connect with Duprinter, the SCSI cable [Interface cable pin - pin/4M L1-W1190 Model is
necessary. (sold separately)
(1) Preparation
q PC (Macintosh)
IMPORTANT
• Because a Macintosh computer is normally equipped with a built-in SCSI, it is not necessary
to install the SCSI Host Adapter.
Some models of the Power Macintosh G3, Power Macintosh G4 computers are not equipped
with a built-in SCSI.
For those models, the DDP system can be used by installing the Adaptec SCSI Host
Adapter.
The SCSI Host Adapter whose performance has been warranted as of 1 October 2000 is:
Adaptec 2930
(2) Setting PC
q Stop the Quick DrawTM GX.
Quick DrawTM GX can be set in [Extended Function Manager] of [Control Panel].
w Reboot PC after stopping Quick DrawTM GX.
26
Connection of PC & Duprinter
Connect a computer to Duprinter.
Preparation of Hardware
PCB unit and setting up of Duprinter are all completed before connecting Duprinter.
■ Parallel Connection
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
DP-43SF
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
27
Connection of PC & Duprinter
■ USB Connection
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
DP-43SF
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
28
Connection of PC & Duprinter
■ SCSI Connection
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Preparation of Hardware
SCSI Connector is located on the back of Duprinter. Plug the
connector a click.
DP-43SF
IMPORTANT
• Be sure to turn off the power of both Duprinter and PC when inserting or pulling off the SCSI
cable.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Continue Page • • •
29
Connection of PC & Duprinter
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
The SCSI conversion UNIT (Model number: L1-S0012) is available for a note book computer. It is also
possible to extend the SCSI cable using the SCSI conversion UNIT and the SCSI cable.
SCSI
Centronics half Centronics 50pin
conversion
50pin (female) (female)
UNIT
To PC
The maximum length of the cable is limited to 6m by the SCSI standard. When extending the cable, do not
connect any devices other than Duprinter to the same SCSI Host Adapter. Doing so may make the system
unstable. The total length of the cable should be 12m or less for stability of the system.
PC
Duprinter
SCSI conversion UNIT
(optional)
SCSI cable
(optional) SCSI cable
(optional)
12m
30
Connection of PC & Duprinter
Preparation of Hardware
Male
Male
Female
Male
Male
31
Connection of PC & Duprinter
Three SCSI cables are available for connecting two or more Duprinters or extending the cable.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
32
Chapter 2
Installation of Software
This chapter describes how to install the DUPLO SCSI Printer Driver in a computer.
2
Installation of Software
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Parallel Connection
Installing in Windows 95 or Windows 98
An example when installing in Windows 98 is described here. Installing in Windows 95 can be carried out in
the same way.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Set the printer driver disk that has the name of Duprinter to be used on it in the floppy
disk drive.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
34
Installation of Printer Driver
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Select a language.
Select “English Version” and click OK button.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
12
After the window opens, click Continue button.
Installation of Software
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
35
Installation of Printer Driver
USB Connection
Installing in Windows 98
■ Installing the USB driver
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
36
Installation of Printer Driver
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Installation of Software
ware Wizard] window.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Continue Page • • •
37
Installation of Printer Driver
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
38
Installation of Printer Driver
SCSI Connection
Installing in Windows 3.1
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Installation of Software
A main window opens.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
39
Installation of Printer Driver
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Set the attached disk of Duplo DDP system Printer Driver for Microsoft®
WINDOWS® in the floppy disk drive.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Click OK button .
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
40
Installation of Printer Driver
Installing in Windows 95
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Installation of Software
4.00.950A
Choose [Do not install a driver] and click OK button.
The Duprinter is registered in Windows 95 and the display
will not appear afterwards.
The Duprinter is registered in Windows 95 and the display will not appear afterwards.
If these displays do not appear, proceed to step 4.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Continue Page • • •
41
Installation of Printer Driver
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Set the attached Duplo DDP system Printer Driver for Microsoft® Windows® disk in
the floppy disk drive.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
42
Installation of Printer Driver
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Installation of Software
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Continue Page • • •
43
Installation of Printer Driver
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
44
Installation of Printer Driver
IMPORTANT
• The registration of Duprinter can be
confirmed in the [device manager] of [System
Properties]. (e.g. DUPLO DP-43XXA3 44)
12
Installation of Software
• Though it is listed with [?] icon, there is no problem in operation. Do not overwrite this
Duprinter with other drivers.
• There is no driver for hardware of Duprinter. Installation of the driver is not necessary.
• Duprinter operates with the printer driver installed in [Add Printer].
45
Installation of Printer Driver
Installing in Windows 98
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
46
Installation of Printer Driver
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Installation of Software
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
47
Installation of Printer Driver
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Set the attached Duplo DDP system Printer Driver for Microsoft® Windows® disk in
the floppy disk drive.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
48
Installation of Printer Driver
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Installation of Software
SCSI does not appear in the list of the Available Ports.
However, the printer driver sets the Duprinter port to SCSI
internally. In this window, select [LPT1:]. [LPT1:] can also
used by other devices.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
49
Installation of Printer Driver
IMPORTANT
• To install a printer driver and change settings, the access privileges of "Administrator" is
required. Only a user with the access privilege of "Administrator" can log on.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
50
Installation of Printer Driver
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Installation of Software
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Set the attached Duplo DDP system Printer Driver for Microsoft® Windows® disk in
the floppy disk drive.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
51
Installation of Printer Driver
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
52
Installation of Printer Driver
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
12
Installation of Software
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Continue Page • • •
53
Installation of Printer Driver
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
54
Installation of Printer Driver
IMPORTANT
• To install a printer driver and change settings, the access privileges of "Administrator" is
required. Only a user with the access privilege of "Administrator" can log on.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
12
Put on the power of PC and start Windows 2000.
Installation of Software
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
55
Installation of Printer Driver
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
56
Installation of Printer Driver
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
12
Select [LPT1: Printer port] and click Next>
Installation of Software
button.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Set the attached Duplo DDP system Printer Driver for Microsoft® Windows® disk in
the floppy disk drive.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
57
Installation of Printer Driver
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
58
Installation of Printer Driver
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Installation of Software
installation.
The performance of the printer driver of Duprinter has been
confirmed in our company, therefore you can use it without
any problem.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Continue Page • • •
59
Installation of Printer Driver
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
60
Installation of Printer Driver
Installing in Macintosh
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Set the Attached floppy disk of Duplo SCSI Printer Driver for Macintosh. 12
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Installation of Software
When Disk Window opens, drag and drop the
Duprinter Icon to [Extensions] folder.
[Extensions] folder can be found in [System] folder.
If the Printer Driver window does not open, double click the
floppy disk icon.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
61
Installation of Printer Driver
IMPORTANT
• Make sure that the power of Duprinter is on before selecting Printer Driver.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
IMPORTANT
● If Duprinter icon is not displayed
• Duprinter cannot operate while Quick Draw™GX is operating. Stop Quick Draw™GX.
Quick Draw™GX can be selected in [Extensions folder] of [Control panel]. After stopping
Quick Draw™GX, reboot PC.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Close [Chooser].
Click the Close box to close [Chooser].
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
62
Installation when using a network
If you use DUPLO SCSI Printer Driver, you can print in Window95, Windows98, WindowsNT4.0 and
Windows2000 via the network.
A computer that is connected to Duprinter directly via SCSI is called "Print server" and a computer connected
to a network is called "Client" here.
Installation of Software
Panel to open the Network dialog box.
Confirm that the [The following network components are
installed:] box contains [Client for Microsoft Networks] and
[File and Printer sharing for Microsoft Networks]. If not,
click the Add... button to include them.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
63
Installation when using a network
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Install the printer driver according to “Installing in Windows 98” on page 46.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
64
Installation when using a network
12
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Installation of Software
Double-click the [Add Printer].
The [Add Printer Wizard] dialog box appears.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Continue Page • • •
65
Installation when using a network
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
66
Installation when using a network
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Installation of Software
tion is carried out. The [DUPLO SCSI Printer (NETWORK)]
icon is registered in the Printer folder.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
67
Chapter 3
Printing
This chapter describes how to set the printing settings and how to execute printing.
Printing
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Printing procedure
IMPORTANT
● Settings in Duprinter
• In DDP system printing, specifications settable on the control panel of Duprinter are Printing
speed, Printing position, Paper size and sorter selection.
• Do not choose multiple printing or book shade erasure mode, for they may cause printing
interrupted or the center part of image masked.
Printing procedure differs according to the application software in use. Refer to the instruction manual of each
application software. Major procedure is as follows: e.g. With the attached "WordPad".
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
70
Settings and operation of printing
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
q
!0
w
e !1
!2
r !3
!4
t !5
y !6
u
i
o
Printing
w Paper size
To choose paper size from a list. Choose the paper size in accord with the document size. Otherwise, prints
may come out in wrong position or wrong size paper may be selected.
e Resolution
Choose resolution in accord with the Duprinter.
r Paper direction
To choose printing direction between Portrait and Landscape in accord with the direction of the document.
y Number of copies
Specify a number of copies from 1 to 9999. The number set in [Number of copies] in the [Print] dialog box
has priority.
u Number of sets
Specify a number of sets from 1 to 99. Refer to the instruction manual of the Duprinter for information
about Number of set.
i Number of preprint
Specify a number of preprint.
o Preprint ON/OFF
Set the preprint ON or OFF.
!0 OK button
Click to enable the settings and close the dialog box.
!1 Cancel button
Click to cancel the settings and close the dialog box.
!2 Graphics button
Click to open the [Graphics] dialog box and adjust the printing image.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Continue Page • • •
71
Settings and operation of printing
!3 Version... button
Click to see the version information of the printer driver.
!4 Help button
Click to display Help for settings.
!5 Default button
Click to reset the settings of the printer driver to initial settings.
!6 Printer ID
Specify the destined printer ID when used with USB connection.
Graphics
q
w y
e u
i
r
o
t
q Enlargement/Reduction
To enlarge/reduce the image data. Possible range is 50% ~ 200% in 1% intervals.
w Scale
Specify the scale of halftone from among “Coarse 1”, “Coarse 2”, “Standard”, and “Fine”.
e Thickness
Specify the thickness of halftone.
r Contrast
Specify the contrast of halftone.
y OK button
Click to enable the settings and close the [Graphics] dialog box.
u Cancel button
Click to cancel the settings and close the [Graphics] dialog box.
i Default button
Click to reset the settings in the [Graphics] dialog box to the initial settings.
o Help button
Click to display Help for the [Graphics] dialog box.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
72
Settings and operation of printing
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Printing
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
73
Settings and operation of printing
SCSI Connection
Windows3.1
In this section, the procedure for the settings and execution of printing in Windows 3.1 are described.
■ Printing procedure
IMPORTANT
● Settings in Duprinter
• In DDP system printing, specifications settable on the control panel of Duprinter are Printing
speed, Printing position, Paper size and sorter selection.
• Do not choose multiple printing or book shade erasure mode, for they may cause printing
interrupted or the center part of image masked.
Printing procedure differ according to the application software. Refer to the instruction manual of each appli-
cation software. Major procedure is as follows: e.g. With the attached ‘Write’.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
q
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
q w
q Source
Select paper feeding method in accordance with the specification of Duprinter. For paper feeding method
information, refer to the instruction manual of Duprinter
w Size
Choose the paper size in accord with the document size. Otherwise, prints may come out in wrong size
with some application software.
74
Settings and operation of printing
IMPORTANT
● Paper size and paper direction
• For information on acceptable paper size, refer to the instruction manual of the Duprinter.
• Be sure to set paper of the size specified in application software. When printing direction is
specified as Landscape in application software, DUPLO SCSI Printer driver turns the
printing data 90degree automatically.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
13
Printing
q w e
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
75
Settings and operation of printing
■ Printing procedure
IMPORTANT
● Settings in Duprinter
• In DDP system printing, specifications settable on the control panel of Duprinter are Printing
speed, Printing position, Paper size and sorter selection.
• Do not choose multiple printing or book shade erasure mode, for they may cause printing
interrupted or the center part of image masked.
Printing procedure differs according to the application software in use. Refer to the instruction manual of each
application software. Major procedure is as follows: e.g. With the attached “WordPad”.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
[Paper] display
[Paper feeding method], [Paper size], [Resolution], [Paper
direction] and [Number of prints] can be specified.
76
Settings and operation of printing
[Options] display
[Widening print area], [Specify SCSI ID of printer] and
[Number of sets] can be selected.
[Graphics] display
13
[Enlargement/Reduction], [Color Resolution], [Texture] and
Printing
[Intensity] can be selected.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
77
Settings and operation of printing
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
t u
q [Paper] display
To specify paper size, number of copies etc.
w [Options] display
To enlarge image area, to choose SCSI ID to output, and to specify number of sets.
e [Graphics] display
To specify enlargement/reduction, colour resolution, texture and intensity.
r ? online help button
? turns into a mouse pointer with ‘?’ when pressed. Click any item or button on the dialog box for a short
explanation.
t OK button
Enable the renewed setting and close DUPLO SCSI Printer dialog box.
y Cancel button
Cancel the renewed setting and close DUPLO SCSI Printer dialog box.
u Apply button
Enable the renewed setting.
78
Settings and operation of printing
[Paper] display
[Paper feeding method], [Paper size], [Resolution], [Paper direction] and [Number of prints] can be specified.
q
w
13
Printing
q [Paper feeding method(S)]
Choose paper feeding method. Specify each item according to the feeding method of the Duprinter.
w [Paper size(P)]
Choose paper size from a list. Choose the paper size in accord with the document size. Otherwise, prints
may come out in wrong size with some application software.
e [Resolution(R)]
Choose resolution in accord with the Duprinter.
r [Paper direction (I)]
Choose printing direction (Portrait or Landscape).
t [Number of prints(C)]
Specify number of copies from 1 to 9999. Default of [Number of copies] can be specified in [Print] dialog
box. If the number is changed in [Print] dialog box, the new number is given the priority over the default
number.
y Version(V)... button
Click to see the version information of DUPLO SCSI Printer Driver.
IMPORTANT
● Paper size and paper direction
• For information on acceptable paper size, refer to the instruction manual of the Duprinter.
• Be sure to set paper of the size specified in application software.
• When printing direction is specified as Landscape in application software, DUPLO SCSI
Printer driver turns the printing data 90degree automatically.
79
Settings and operation of printing
[Options] display
[Widening print area], [Specify SCSI ID of printer] and [Number of sets] can be specified.
80
Settings and operation of printing
[Graphics] display
[Enlargement/Reduction], [Colour Resolution], [Texture] and [Intensity] can be specified.
q
w
13
Printing
q [Enlargement/Reduction]
To enlarge/reduce the image data transmitted from application software in Printer driver side. Possible
range is 50% ~ 200% (by every 1%).
w [Colour Resolution]
Check [Colour Resolution] to choose from [Output specified colour only], [Output expect specified colour
only] and [solid tone]. Choose colour in [Specify Colour].
[Output specified colour only] : Print images of specified colour only.
[Output expect specified colour only] : Print images of all colour except the specified colour.
[solid tone] : All colour except white in the document is printed in solid tone.
(no half tone)
e [Texture]
To choose texture from [Coarse], [Standard] and [Fine].
r [Intensity]
Adjust the intensity with a scroll bar. Adjustable range is between -128 and +128 (when the standard value
is 0). - for darker image and + for lighter image.
81
Settings and operation of printing
Macintosh
In this section, the procedure for the settings and execution of printing with a Macintosh computer are de-
scribed.
■ Page setup
Before making text, paper size, orientation etc has to be specified. Items regarding paper can be set in
[Duprinter Page Setup] dialog box.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
r
q t
w
e
q Paper size
Select paper size from paper size list.
w Enlarge : Reduce
Enlarge/reduce the data transmitted from application software on the printer driver side. Possible range is
from 25 to 400% by each 1% step.
e Orientation
Select the printing orientation to the paper direction.
IMPORTANT
● Paper size and paper direction
• For information on acceptable paper size, refer to the instruction manual of the Duprinter.
• Be sure to set paper of the size specified in application software.
• When printing direction is specified as Landscape in application software, DUPLO SCSI
Printer driver turns the printing data 90degree automatically.
r OK button
Enable the items changed and end setting.
t Cancel button
Disable the items changed and end settings.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
End setting all specifications, click OK button to close [Duprinter Page Setup] dialog
box.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
82
Settings and operation of printing
■ Printing
IMPORTANT
● Settings in Duprinter
• In DDP system printing, specifications settable on the control panel of Duprinter are Printing
speed, Printing position, Paper size and sorter selection.
• Do not choose multiple printing or book shade erasure mode, for they may cause printing
interrupted or the center part of image masked.
Settings such as Number of copies are required before executing printing. Items relating to printing are
contained in the [Print] dialog box.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
IMPORTANT
• Printing procedure differ according to the application software. Refer to the instruction
13
manual of each application software. Major procedure is as follows:
Printing
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
q Pages
Select pages to be printed out. When [All] is selected, all page of the text are printed out. To specify pages,
click radio button on the right and input page number in page selection boxes.
w Copies
Input number of copies from 1 to 9999.
e Set
Specify number of sets from 1 to 99. For information on set, refer to the instruction manual of Duprinter.
r OK button
Printing starts according to the settings.
t Option button
[Print Option] dialog box opens. Texture printing, specified etc can be selected in this dialog box.
Refer to Print options for details.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Print.
Confirm the settings in Printer dialog box, and click OK button.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
83
Settings and operation of printing
■ Print options
Click option... button in [Print] dialog box to open [Print option] dialog box.
!1
q
!2
w
e
r
t
i !3
o !0
e Multi Page
Select a number of pages for Multi Page from 2, 4 and 8.
Multi page printing can be performed in the same way when it is set on the operation panel of Duprinter.
Setting on Duprinter operation panel is not necessary.
r Half Tone
Select a dither pattern in accordance with the text image.
Error diffusion : Select when printing fine-scale documents such as photographs. Default setting.
Middle-fine dither : Scale is produced by dithering patterns. Select when printing images such as graphs.
Coarse dither : Scale is produced by coarse dithering patterns.
No halftone : No halftone is produced. Select when printing line arts or text documents.
t Tone
Select Tone. Select Tone from Dark, Normal and Light.
i Fluct
Specify the allowance of RGB value setting to pick up. When it is set at 0, the exact colour of specified
RGB value only is picked up.
84
Settings and operation of printing
o Indicate the specified colour. Click to open [Color picker] and select the
colour graphically.
!0 Input the colour to select with RGB value directly. After inputting the
value, click Specify button.
!1 OK button
13
Enable the items changed and end setting.
Printing
!2 Cancel button
Disable the items changed and end settings.
!3 Specify button
Click Specify button to set the RGB value for colour selection.
85
Chapter 4
Customizing
This chapter describes how to make the printer driver easier-to-use and how to customize
it.
Customizing
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Duplopd.spd. File
C: \WINDOWS\SYSTEM\Duplopd.spd
(When Windows 95 / Windows 98 is installed in WINDOWS Directory in C drive.)
Contents of Duplopd.spd
[DUPLO SCSI Printer]
Language = 0 q
SetCopies = 0 w
EnumPapers =0 e
Resolutions = 0 r
PaperName = 0 t
SidewaysFeed = 0 y
Mirror600= 0 u
SepData= 0 i
Note: Do not overwrite [DUPLO SCSI Printer].
88
Customizing Printer Driver
w EnumPapers=n
n=1→ Not displayed, n=0: Displayed
n=1→ Letter and Legal series of paper are listed on the top.
14
n=0→ A and B series of paper are listed on the top.
Customizing
e Resolutions=n Presentation of the resolution.
n=1→ Resolution is described as A, B, or C. n=0: Described as 300, 400, or 600
dpi.
r SidewaysFeed=n n=1→ A4 size or smaller size paper is rotated by 90 degrees before printing.
89
Customizing Printer Driver
Macintosh
An application software called ‘ResEdit’ is required. ResEdit is like graphical editor, which is necessary to
develop Macintosh program.
IMPORTANT
● How to get ResEdit?
1. ResEdit is attached to some ResEdit on the market.
2. ResEdit is also attached to language development software by Symantec (THINK C, THINK
Pascal, Symantec C++), Code Warrior by Metrowerks etc.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
90
Customizing Printer Driver
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
14
After input, close the windows in order and select [Save] command in command in
Customizing
[File] menu and save it.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Copy the edited driver in [Extensions] folder. Confirm the editing result by opening in
[Selector].
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
91
Chapter 5
Trouble Shooting
This chapter describes troubles and causes during installation and printing and how to
remedy them.
Trouble Shooting
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
94
Trouble shooting
SCSI Connection
Windows3.1
■ In installation
Symptom Cause Measure
SCSI Host The card & socket service Install the card & socket service. Please refer to the
Adapter cannot is not installed in PC instruction manuals of PC for details.
be installed.
(Note type)
PC does not
system.
IO addresses or IRQ of Reset the IO addresses or IRQ properly. For procedure refer
1
start after SCSI host adapter and those to the instruction manuals of each circumference devises.
installing SCSI of other circumference
host adapter. devices are overlapped.
SCSI host adapter does not SCSI host adapter now in use do not operate with some old
support PC. PC models. Contact the maker of the SCSI host adapter.
‘Printing’ is
displayed but
PC is processing image
data.
colour variation.
Some PCs take some time to process image data due to their
memory or CPU condition.
5
does not print.
Trouble Shooting
Error message: ASPI manager is not Please confirm that ASPI manager is registered and operating
ASPI manager working. properly. For details refer to the instruction manual of the SCSI Host
is not working. Adapter.
In Windows3.1, ASPI manager is normally registered in
CONFIG.SYS.
(Ex) CONFIG SYS.
DEVICE=C\SCSI\ASPI12DOS.SYS. ←ASPI Manager.
Drive and Directory in which ASPI Manager is installed.
SCSI Host Adapter is not Confirm the SCSI Host Adapter is working properly. Make
working. sure the IO address or IRQ is not overlapped with those of
other devices. Please refer to the instruction manual of SCSI
Host Adapter for details.
Error message: Bad connection of It may be caused by bad connection of Interface cable and
Connection Interface cable etc. converting adapter. Make sure that they are connected well.
failure of Some combination of SCSI and PC may cause mal-functioning.
interface cable. SCSI ID is overlapped. Reset the ID.
A terminator is attached to A terminator has to be attached to the end device. Confirm the
the equipment in the operation with SCSI line connecting Duprinter only.
middle of SCSI bus.
95
Trouble shooting
96
Trouble shooting
Trouble Shooting
working properly RGB>
R G B
Black 0 0 0
Red 255 0 0
Green 0 255 0
Blue 0 0 255
Light blue 0 255 255
Purple 255 0 255
Yellow 255 255 0
The application software The color separation function of some application software
is not compliant. may not work correctly.
97
Trouble shooting
98
Trouble shooting
Trouble Shooting
99
Trouble shooting
Though it is listed with [?] icon, there is no problem in operation. Do not overwrite this Duprinter with other
drivers.
There is no driver for hardware of Duprinter. Installation of the driver is not necessary.
Duprinter operates with the printer driver installed in [Add Printer].
100
Trouble shooting
Majority of troubles occur in installation is caused by the SCSI host adapter set up.
● When ISA bus type or PCI bus type is used in Windows 95 or Windows 98
IMPORTANT
• Do not connect Duprinter when setting up SCSI host adapter.
[!] or [×] with SCSI Icon indicates that SCSI is not working properly.. In this case it is necessary to have
system recognize the SCSI host adapter again.
1) Click the device to open a dialog box for confirmation.
2) Click OK button to close the dialog box. Follow instructions on display to reboot PC and have SCSI host
adapter recognized.
1
If the description on the display is different from the name of the SCSI host adapter which is set up, choose the
Driver and click Change Driver... button and follow the instructions on the display.
Trouble Shooting
Error message [0A-XX0000] is displayed and printing cannot be performed.
This error generated from ASPI manager when SCSI driver or ASPI manager cannot cope with the requirements of
DUPLO SCSI PRINTER DRIVER.
Upgrade the SCSI driver or ASPI manager, or use a recommended SCSI Host Adapter.
101
Trouble shooting
Macintosh
IMPORTANT
• To close error messages without turning on the power of Duprinter, Click OK 4 ~ 6 times.
102
Trouble shooting
Trouble Shooting
103
L1-Y1660 2000.10