Professional Documents
Culture Documents
Sub Engineer Civil MCQ
Sub Engineer Civil MCQ
Salman
PHED Full Solved Paper for the Post of Sub Engineer Civil (BPS-12) in (CE-South) (Advertised in 20
November 2019)
The Test were conducted through ETEA on 3/10/2020
5. Window is kept at
A. 10’ Height
B. 6’ Height
C. 4’ Height
D. 3’ Height
1
Paper Solved By M.Salman
16. The center of pressure of a surface subjected to fluid pressure is the point?
A. on the surface at which gravitational force acis
B. at which all hydraulic forces meet
C. similar to metacenter
D. on the surface at which resultant pres-sure acts
2
Paper Solved By M.Salman
18. Minimum _______ days are required for cement mortars curing.
A. 7 days
B. 10 days
C. 12 days
D. 28 days
23. A metal with specific gravity of o floating in a fluid of same specific gravity a will?
A. Ink to bottom
B. float over fluid
C. be fully immersed with top surface at fluid surface
D. none of the above
3
Paper Solved By M.Salman
26. A beam having One ends is fixed in wall & the other end is supported with column is called?
A. Propped Beam
B. Overhanging Beam
C. Cantilever Beam
D. Continuous Beam
28. Sand Passing from sieve No 40 & Retained on Sieve No 200: 0.075-0.425mm is called:
A. Fine Sand
B. Medium Sand
C. Coarse Sand
D. None of these
4
Paper Solved By M.Salman
36. If the sand in-situ is in its densest state, then the relative density of sand is?
A. Zero
B. 1
C. between 0 and 1
D. greater than 1
37. How Much time required for Artificial Seasoning of an freshly sown timber:
A. 1-2 days
B. 4-5 days
C. 1-2 months
D. 3-6 months
40. In 4th method of pile testing the pile is driven at __________ rate by continuous applying jet
loading:
A. 6mm/minute
B. 8mm/minute
C. 10mm/minute
D. 12mm/minute
5
Paper Solved By M.Salman
45. For the excavation of Tube Well, which method is recommended most commonly?
A. Digging Method
B. Boring Method
C. Driving Method
D. None of these
47. The amount of reinforcement for main bars in a slab, is based upon?
A. Minimum bending moment
B. Maximum bending moment
C. Maximum shear force
D. Minimum shear force
48. In Concrete Dissert Sand Can’t Make Proper Bond with Other Ingredients Because of its:
A. Smoothness
B. Roughness
C. Shape
D. All of the above
6
Paper Solved By M.Salman
50. Down ward Shear Force is a Negative Shear Force and its is called:
A. Sagging
B. Hugging
C. Bending
D. Buckling
54. If a rigid body is in equilibrium under the action of three forces, then?
A. these forces are equal
B. the lines of action of these forces meet in a point
C. the lines of action of these forces are parallel
D. B. and C. above
7
Paper Solved By M.Salman
57. Operation of McLeod gauge used for low pressure measurement is based on the principle of?
A. gas law
B. Charles’s law
C. Boyle‘s law
D. Pascal‘s law
60. Two circular discs of same weight and thickness are made from metals having different
densities. Which disc will have the larger rotational inertia about its central axis?
A. disc with larger density
B. disc with smaller density
C. both discs will have same rotational inertia
D. none of the above
61. Which of the following methods of theodolite traversing is suitable for locating the details which
are far away from transit stations?
A. measuring angle and distance from one transit station
B. measuring angles to the point from at least two stations
C. measuring angle at one station and distance from other
D. measuring distance from two points on traverse line
62. On a single lane road with two way traffic, the minimum stopping sight distance is equal to?
A. stopping distance
B. half the stopping distance
C. two times the stopping distance
D. three times the stopping distance
8
Paper Solved By M.Salman
64. The diagram which shows the approximate path of vehicles and pedestrians involved in
accidents is known as?
A. spot maps
B. collision diagram
C. pie charts
D. condition diagram
65. Number of dog spikes normally used per rail seat on curved track is?
A. one on either side
B. two outside and one inside
C. one outside and two inside
D. two outside and two inside
66. Which of the following devices is used to transfer the wagons or locomotives to and from
parallel tracks without any necessity of shunting?
A. Triangle
B. Turntable
C. scotch block
D. Traverser
67. Which of the following statements regarding ballast materials are correct?
A. Brick ballast has poor drainage characteristics.
B. Sand ballast causes excessive wear on top of rail
C. Coal ash is not used as ballast with steel or cast iron sleepers.
D. Gravel ballast gives better performance on soft formation
69. Bending compressive and tensile stresses respectively are calculated based on?
A. net area and gross area
B. net area in both cases
C. gross area and net area
D. gross area in both cases
70. By providing sufficient edge distance, which of the following failures of riveted joint can be
avoided?
E. shear failure of the plate
F. tension failure of the plate
G. shear failure of the rivet
H. crushing failure of the rivet
9
Paper Solved By M.Salman
10
Paper Solved By M.Salman
81. _______ has successfully launched the Arab world’s first Mars mission on 20th July,2020.
A. UAE
B. Saudi Arabia
C. Qatar
D. Kuwai
11
Paper Solved By M.Salman
86. What is the rank of Pakistan, According to the Global Terrorism Index 2020?
A. 5th
B. 7th
C. 9th
D. None of these
87. Lowari tunnel connects Dir and Chitral in Khyber Pakhtunkhwa. Its total length is _____ km.
A. 6.4
B. 8.4
C. 10.4
D. 12.4
90. National assembly of Pakistan passed bills related to _________ in Sept 2020 ?
A. FATA
B. FATF
C. Gang rape
D. None of these
92. The best eatable thing mentioned in the Holy Quran is?
A. Dabino
B. Honey
C. Water melon
D. Milk
12
Paper Solved By M.Salman
98. Holy Quran Translated into English for the first time by:
A. Khalifa Abdul Hakeem
B. Shah Rafiuddin
C. Hafiz Lakhvi
D. Shah Waliullah
13
Paper Solved By M.Salman
14