This document contains specifications for two gears, including the number of teeth, pitch circle diameter, outside diameter, ratio, and working center distance. However, many of the values are listed as errors or undefined, indicating the gear properties have not yet been calculated.
This document contains specifications for two gears, including the number of teeth, pitch circle diameter, outside diameter, ratio, and working center distance. However, many of the values are listed as errors or undefined, indicating the gear properties have not yet been calculated.
This document contains specifications for two gears, including the number of teeth, pitch circle diameter, outside diameter, ratio, and working center distance. However, many of the values are listed as errors or undefined, indicating the gear properties have not yet been calculated.
GEAR 1 TEETH CALCULATED PCD 0.00 mm 0 radian of helix angle OD 0.00 mm RATIO #DIV/0! e.g. 200RPM IN = #DIV/0! RPM OUT
GEAR 2 TEETH CALCULATED PCD 0.00 mm
OD 0.00 mm WORKING CENTRES 0.000 mm
PITCH mod PITCH mod
helix angle as a decimal helix angle GEAR 1 TEETH CALCULATED PCD 0.00 GEAR 1 TEETH CALCULATED PCD 0.00 OD 0.00 OD 0.00 RATIO #DIV/0! e.g. 200RPM IN = #DIV/0! RPM OUT RATIO #DIV/0! e.g. 200RPM IN =#DIV/0! RPM OUT #DIV/0! % from original #DIV/0! % from original GEAR 2 TEETH CALCULATED PCD 0.00 GEAR 2 TEETH CALCULATED PCD 0.00 OD 0.00 OD 0.00