Professional Documents
Culture Documents
Assistant Rev 2
Assistant Rev 2
2014 Jan 30
Page 1
MicroNetTM Plus and TMR
Of Let 's have a look at something. I'm sorry, I'm sorry. I want to write to you p.
Page 2
SOS Servlink OPC Server
Key functions
• It works on Windows made by Microsoft Corporation. (7, XP, 2000, NT)
• Woodward SOS Sevlink OPC server ( "SOS")
provides OPC interface to control.
• By connecting to "Servlink OPC Server", OPC client
application (Control Assistant) can communicate
with SOS.
Page 3
Control Assistant
Key functions
• It works on Windows made by Microsoft Corporation. (7, XP, 2000, NT)
• It is possible to change the setting value and monitor the control state.
• It is possible to display data log, trend data, maintenance (upload,
download, comparison, edit) of set values.
Page 4
App Manager
Key functions
• It works on Windows made by Microsoft Corporation. (7, XP, 2000, NT)
• CPU status monitoring, maintenance
(Change of IP address and detailed setting)
Page 5
MicroNetTM Plus and TMR
Maintenance PC system requirements
Page 6
PC Connection
Wiring connection of maintenance PC
Ethernet cable:
Maximum cable length 30 m.
Double shield crossover CAT 5
Eth cables.
Maintenance PC
Page 7
Communication Architecture
When using the same IP address on multiple CPUs, it is necessary to make it "repair" or "valid" -
> "invalid" -> "valid" every time the connected CPU is changed.
LAN Port
データ
データ
Control Assistant
Page 8
PC Network Setting
How to set IP address of maintenance PC (panel PC) 1/3
Page 9
PC Network Setting
How to set the IP address of the maintenance PC (panel PC) 2/3
Page 10
PC Network Setting
How to set IP address of maintenance PC (panel PC)
1/3
Page 11
Start Up Service Tool
Start maintenance tool
How to start SOS Servlink OPC Server
1/2From the start menu,
Select "All programs" -> "Woodward" -> "SOS
Servlink OPC Server" -> "Servlink OPC Server".
Page 12
SOS Servlink OPC Server
How to start SOS Servlink OPC Server 2/2
① Enter the IP address of the CPU 5200。
For example, if the IP address of the
connected MicroNet is 172.16.100.1, enter
172.16.100.1.
Page 14
Control Assistant : WinPanel
How to start WinPanel 1/2
① Click the eye button
Page 15
Control Assistant : WinPanel
How to start WinPanel 2/2
② Click the Q button
① Select Control ID
Page 16
Control Assistant : WinPanel
Password setting and cancellation method in setting value change mode
When WinPanel is started, all setting values are locked (readable only).
② Enter password
Page 17
Control Assistant : WinPanel
How to change Configure setting value (only when turbine stops)
IO lock request is displayed before changing Configure setting value.
If IO lock is applied, the device shuts down. Please do not do while driving.
② “No” を選択すると、IOロックはかかりません
Page 18
Control Assistant : WinPanel
How to enter Configure mode
① Click the key button
Page 19
Control Assistant : WinPanel
How to adjust Configure setting value
② Select the item to be changed and enter the setting value directly,
Change the value with the right adjustment button
( "increment" / "decrement"). See below for details.
Fine adjustment (1% increase and decrease of current display value by one click)
Coarse adjustment (9% increase / decrease of current display value with one click)
Page 20
Control Assistant : WinPanel
Exit method of Configure mode 1/2
① When you click "Reset" button,
A window will be displayed.
② After changing the setting value, confirm that the data was saved.
Since the sage is displayed, click the
"Save Values" button.
Page 21
Control Assistant : WinPanel
Exit method of Configure mode 2/2
Page 22
Control Assistant : WinPanel
Service mode set value adjustment method
③When saving change data
Click this button to
② Select the item to be changed and enter the setting value directly,
Change the value with the right adjustment button
( "increment" / "decrement"). See below for details.
It is possible to input the set value directly within 10% of the current
display value. The setting value exceeding 10% can not be entered.
Fine adjustment (1% increase / decrease of current display value with one click)
Coarse adjustment (9% increase / decrease of current display value by one click)
Page 23
Control Assistant : WinPanel
Debug mode setting value change method 1/2
All the setting values in the debug mode, service mode, and
configuration mode are displayed in a tree form, and you can drag
and paste the item you want to change from the left tree-like area to
the right area.
Page 24
Control Assistant : WinPanel
Debug mode setting value change method 2/2
Fine adjustment (1% increase and decrease of current display value by one click)
Coarse adjustment (9% increase / decrease of current display value with one click)
Page 25
Control Assistant : WinPanel
How to save and read in the Custom menu
Click the "Save" button and
save it as * .ws file format.
Page 26
Control Assistant
How to download configurations and service settings
② Select "Opc."
Page 27
Control Assistant
How to download debug setting values
Page 28
Control Assistant
How to upload setting values (only when the turbine is stopped)
Page 29
Control Assistant : Trend
How to activate the trend
After selecting the item, right click and click the "Add Selection to Trend Menu"
button, the above screen will be displayed. By repeating this operation, it
becomes possible to add items to this trend window.
Page 30
Control Assistant : Trend
Trend display window
Page 31
Control Assistant : Trend
Save trend data / menu
Page 32
Control Assistant : Trend
Trend / Graph screen
Select "Properties" from the main menu
Page 33
App Manager
How to start Application Manager
From the start menu,
Page 34
App Manager
Confirmation of operation state of
control device
Page 35
App Manager
Confirmation of operation state of control device
Page 36
App Manager
Application button
Update control list
application
Implement restart
Start contr
Page 37
App Manager
Password security
Password is necessary when operation change operation of application software.
Page 38
Password and Login name
Password security
Control Assistant WinPanel
App Manager
Connect As : ServiceUser
Password : ServiceUser
Page 39
Trouble Shoot
• OPC Servlink Server / App Manager can not be connected.
Confirmation method 1:
Please enter ping XXX.XXX.XXX.XXX from the Windows command prompt and make sure that it is physically connected. If
the connection is not normal at that time, it is conceivable that "IP address setting of PC", "IP address of MicroNet is different",
"LAN cable is not physically connected" (XXX.XXX.XXX.XXX Indicates the IP address of the MicroNet to be connected).
Confirmation method 2:
It may be solved by selecting "Network connection" from the Windows control panel and right-clicking on the corresponding
connection and repairing it.
Confirmation method 3::
It may be solved by correctly setting anti-virus software or firewall. In that case, you need to exclude Servlink Server / App
Manager services from protection.
Confirmation method 4:
It may be solved by disabling unused communication interfaces (including virtual interfaces).
Page 40
World’s largest independent
designer, manufacturer, and service provider
of energy control solutions for
aircraft engines, industrial engines and turbines,
power generation, and process automation equipment