Professional Documents
Culture Documents
Calibracion Flujo DM 101
Calibracion Flujo DM 101
JB087716000 -17
Serial Nº Zero point
Flow Flow Duration m target m meas. ∆ o.r.* Outp.** Measured error % o.r.
[%] [lb/min] [s] [lb] [lb] [%] [mA] Tolerance limit: ±0.1% o.r.
- - - - - - - 0
- - - - - - -
- - - - - - - -0.5
- - - - - - - -1
- - - - - - -
- - - - - - - -1.5
For detailed data concerning output specifications of the unit under test, see Technical Information (TI), chapter Performance characteristics.
The calibration is traceable to the N.I.S.T. through standards certified at preset intervals.
Endress+Hauser Flowtec operates ISO/IEC 17025 accredited calibration facilities in Reinach (CH), Cernay (FR), Greenwood (USA),
Aurangabad (IN) and Suzhou (CN).
12-03-2014
Date of calibration
{ S. Newcomer
Operator
Page 1 / 1