Professional Documents
Culture Documents
SingleBore Subsea Production Systems
SingleBore Subsea Production Systems
SINGLEBORE ™
Surface Tree
Offshore, Time is Money.
Tubing or Drill Pipe
Running String
Dril-quip’s SingleBore™ Completion System is a
time-saving alternative to expensive traditional
subsea completion system designs.
Tension Joint
Tree
Control annulus. It employs these unique components:
Running Tool Umbilical
• Dril-Quip’s patented annulus
valve, the SB-Valve™
1
Completion System Alternative
Unique Design = Less Cost
The unique design allows the SingleBore Tubing
Hanger, SingleBore Tree and Tree Cap to be run on
drill pipe or tubing, which lowers cost in two ways:
Singlebore Tree Running Tool, Tree and Tree Cap Safe and Dependable
(Inset: Hose Bundle and Reel) The SingleBore Completion System offers all the
safety features of the traditional dual bore
completion system.
Dril-quip – Your
Remote Operated Vehicle Single-Source Supplier
(ROV) Compatibility From a single wellhead to multiple offshore
The SingleBore Completion System is designed development projects, Dril-Quip has the expertise,
for use with ROVs. facilities and technology to get the job done.
Dril-Quip offers a full line of drilling and
• All valves can have ROV overrides and completion equipment, from the tubing hanger,
visual position indicators tree and running tools through the workover riser
system and the hydraulic workover control system.
• Unique, low-cost ROV-assisted flowline
connection system is available For more information, contact a Dril-Quip
representative today.
2
The Singlebore
Tubing Hanger
Top View of SinbleBore Tubing Hanger
5" Production
Bore
S1 S4
S2 S5
S3 S6
Downhole Downhole
Electrical Safety
Transducer Valve
Annulus
Annulus
Valve Open Valve Close
Annulus Valve
• The tubing hanger is available for H2S and severe service • Metal-to-metal sealing throughout;
of special note are metal-to-metal seals
• Tubing sizes up to 7" can be accommodated while between ball and seat seal, and between
maintaining a 2" annulus access
seat seal and tubing hanger body
• Dril-Quip‘s patented sb-Valve replaces annulus plug
• Sealing area is hard banded for
profile in the tubing hanger and the necessity for dual
bore running string long, durable life and reliable
sealing performance
• The Sb-Valve is pressure balanced so that pressure in the
annulus will not accidentally open or close the bore • Resilient seal backup
• The annulus SB-Valve system is testable from above to • Provides a 2" annulus access
confirm sealing integrity
• Field-proven performance
3
Control Fluid
in Port A
(open Annulus Open to Tree
position)
Control fluid in Port A provides pressure
on the open function and keeps the
Tubing SB-Valve piston down to allow flow
Hanger
Body through the annulus bore to the stab sub.
Pressure in the annulus will not close the
SB-Valve because the Sb-Valve is
pressure balanced by design.
Annulus
Ball
Control Fluid in Port B
(partially closed position)
Piston
Stem
Packing
Production
Bore
Annulus
Seal
Piston
SB-Valve
Partially Closed
Control fluid in Port B starts the
piston upward to rotate the annu-
lus ball into the closed position.
Sb-valve Closed
Control fluid in Port B shifts the piston up,
moving the Sb-Valve annulus ball into the
closed position and blocking annulus access.
Pressure in the annulus will not arbitrarily
open the Sb-Valve, but instead will assist in
sealing the ball against the seat.
4
The Singlebore Tree
the unique features of the Singlebore Tree
enable operators to save time and money
Singlebore Tree in Systems Integration Testing (SIT) • The SingleBore Tree requires less time for installation and
workover than all other tree types
• The workover riser system and surface tree for the SingleBore
Tree are simpler and less expensive than systems for traditional
dual bore trees
• Since only one vertical bore exists, the SingleBore Tree can be
run on tubing or drill pipe with an umbilical; the SingleBore
Tree design eliminates the need for an expensive dual bore
completion riser system
• Flow through the tree to and from the annulus occurs in a series
of connected bores; annular flow from downhole exits from
the side of the tree through the annulus master valve; during
running or retrieving, or during workover, a 1-inch O.D. high-
pressure line run with the workover control umbilical provides
access to the annulus
Singlebore Gas Tree being lifted off a
workboat onto the rig
• The SingleBore Tree and Tree Cap Running and Retrieving Tool
replace an expensive lower riser package and an emergency
disconnect system
5
Annulus Access Production
Annulus Flowline Flowline
Access Production
Flowline Flowline
Dx® mechanical
Wellhead connector
6
DRIL-QUIP WESTERN HEMISPHERE DRIL-QUIP EASTERN HEMISPHERE DRIL-QUIP ASIA PACIFIC
DRIL-QUIP, INC. World Headquarters DRIL-QUIP (Europe), Ltd. DRIL-QUIP Asia Pacific Pte. Ltd.
13550 Hempstead Hwy. Stoneywood Park, Dyce No. 9, Tuas Avenue 12
Houston, Texas 77040 Aberdeen, Scotland, UK AB21 7DZ Singapore, 639031
Tel (713) 939 7711 Tel (44) 1224 727000 Tel (65) 6861 0600
Fax (713) 939 8063 Fax (44) 1224 727070 Fax (65) 6861 5700
DRIL-QUIP do Brasil, LTDA. DRIL-QUIP London DRIL-QUIP China
Macaé, Brazil High Wycombe, Shekou, P. R. China
Bucks, England Tel (86) 75 5268 97137
Tel (55) 22 2791 8950 Tel (44) 1494 601086 Fax (86) 75 5268 97134
Fax (55) 22 2791 8989 Fax (44) 1494 601094
DRIL-QUIP Oilfield Services
DRIL-QUIP New Orleans DRIL-QUIP Norway DRIL-QUIP Egypt (Tianjin) Co., Ltd.
New Orleans, Louisiana Stavanger, Norway Zahraa El-Maadi, Cairo, Egypt Tanggu, Tianjin, P. R. China
Tel (504) 522 5566 Tel (47) 51 443700 Tel (20) 22 753 8809 Tel (86) 22 2580 7466
Fax (504) 522 4426 Fax (47) 51 443701 Fax (20) 22 753 8907 Fax (86) 22 2580 7130
DRIL-QUIP The Netherlands Alexandria, Egypt DRIL-QUIP Malaysia
Beverwijk, The Netherlands Tel (20) 3 450 0507 Kuala Lumpur, Malaysia
Tel (31) 251 22 9250 Fax (20) 3 450 0508 Tel (60) 3 2168 4308
Fax (31) 251 22 0044 Fax (60) 3 2168 4201
DRIL-QUIP Nigeria, Ltd.
DRIL-QUIP Denmark Port Harcourt, Nigeria D.Q. Holdings Pty., Ltd.
Esbjerg, Denmark Tel (234) 84 463866 Perth, Australia
Tel (45) 7518 0944 Fax (234) 84 463649 Tel (61) 8 9322 8600
Fax (45) 7518 0640 Fax (61) 8 9322 8500
DRIL-QUIP (Ghana) Ltd.
Takoradi, Ghana DRIL-QUIP Darwin
Tel: (233) 312 5384 Berrimah, Australia
Tel (61) 420 340 528
Fax (61) 8 8932 8084
DRIL-QUIP Indonesia
Jakarta, Indonesia
Tel (62) 21 720 0612
Fax (62) 21 720 1513