Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

1

JEE Ultimate Crash Course


Semiconductors DPP-02

1. In an intrinsic semiconductor, the density of 6. Which of the following gates corresponds to


conduction electrons is 7.07 × 1015 m–3. the truth table given below?
When it is doped with indium, the density of A B C
holes becomes 5 × 1022 m–3. Find the density
of conduction electrons in doped 1 1 0
Semiconductor 1 0 1
(A) Zero (B) 1 × 109 m–3 0 1 1
–3
(C) 7 × 10 m15
(D) 5 × 1022 m–3 0 0 1

2. The current gain  of a transistor is 50. The (A) NAND


input resistance of the transistor, when used (B) NOR
in the common emitter configuration, is (C) XOR
1 k. The peak value of the collector a.c. (D) OR
current for an alternating peak input voltage
0.01V is 7. The combination of gates shown in the
circuit is equivalent to
(A) 100 A (B) 250 A
(C) 500 A (D) 800 A

3. A transistor is operated in CE configuration


at Vcc = 2V such that a change in base current
from 100 µA to 200 µA produces a change in
the collector current from 9 mA to 16.5 mA.
The value of current gain,  is (A) OR
(A) 45 (B) 50 (B) AND
(C) 60 (D) 75 (C) NOR
(D) NAND
4. Input signal to a common emitter amplifier
having a voltage gain of 1000 is given by 8. A p-n photodiode is manufactured from a
Vi = (0.004 V) sin (t + /2). semiconductor with band gap of 3.1 eV.
The corresponding output signal is Which of the following wavelengths can be
(A) (40V) sin (t + /2) detected by it?
(B) (0.004V) cos (t + /2) (A) 4000 Å
(C) (4V) cos (t – /2) (B) 3900 Å
(D) (4V) sin (t – /2) (C) 4200 Å
(D) Both (A) and (B)
5. The adjoining logic symbol is equivalent to

(A) OR gate (B) AND gate


(C) NOT gate (D) NAND gate
2

9. Four equal resistors, each of resistance 10 , 11. Calculate the current I in the following
are connected as shown in the circuit circuit, if all the diodes are ideal. All
diagram. The equivalent resistance between resistances are of 200 .
A and B is

(A) 5  (B) 10 
(C) 10  (D) 40 

10. What is the value of output voltage V0 in the (A) Zero (B) 1 A
circuit shown in the figure? (C) 2 A (D) 4 A

12. A transistor having  = 0.99 is used in a


common base amplifier. If the load
resistance is 4.5k  and the dynamic
resistance of the emitter junction is 50 the
voltage gain of the amplifier will be
(A) 79.1 (B) 89.1
(C) 78.2 (D) 450
(A) 6 V (B) 14 V
(C) 20 V (D) 26 V
3

ANSWERS
1. (B)
2. (C)
3. (D)
4. (D)
5. (B)
6. (A)
7. (A)
8. (D)
9. (B)
10. (A)
11. (B)
12. (B)

For more questions, kindly visit the library section: Link for app: https://links.physicswallah.live/vyJw

For more questions, kindly visit the library section: Link for web: https://physicswallah.live/tabs/tabs/library-tab

Any issue with DPP, please report by clicking here- https://forms.gle/t2SzQVvQcs638c4r5

PW Mobile APP: https://physicswala.page.link/?type=contact-us&data=open


For PW Website: https://www.physicswallah.live/contact-us

You might also like