Professional Documents
Culture Documents
BH 105
BH 105
1 4
5
2 3
6 7
8 9 10 11
Introduction
With the Nokia Bluetooth Headset be within 10 metres (33 feet) of
BH-105, you can make and receive each other. Connections may be
calls while on the move. subject to interference from
Read this user guide carefully before obstructions, such as walls, or other
using the headset. Also, read the electronic devices.
user guide for the mobile device The headset is compliant with
that you connect to the headset. Bluetooth Specification 2.1 + EDR
This product may contain small supporting the Headset Profile 1.1
parts. Keep them out of the reach of and Hands-Free Profile 1.5. Check
small children. The surface of this with the manufacturers of other
device is nickel-free. devices to determine their
compatibility with this device.
Bluetooth wireless technology
Bluetooth wireless technology
allows you to connect compatible
devices without cables. The headset
and the other device do not need to
be in line of sight, but they should
Get started
The headset contains the following Warning: Use only
parts shown on the title page: chargers approved by
power key (1), earloop (2), answer/ Nokia for use with this
end key (3), earpiece (4), indicator particular model. The use of
light (5), charger connector (6), and any other types may
microphone (7). invalidate any approval or
warranty, and may be
Before using the headset, you must dangerous.
charge the battery and pair the
When you disconnect the power
headset with a compatible device.
cord of any accessory, grasp and pull
Parts of the device are magnetic. the plug, not the cord.
Metallic materials may be attracted
1. Connect the charger to a wall
to the device. Do not place credit
outlet.
cards or other magnetic storage
media near the device, because 2. Connect the charger cable to the
information stored on them may be charger connector. The red
erased. indicator light is displayed
during charging. Charging the
Charge the battery battery fully may take up to 2
Before charging the battery, hours.
carefully read “Battery and charger 3. When the battery is fully
information”. charged, the green indicator
device, and set it to search for devices, you may need to make
Bluetooth devices. the connection separately after
4. Select the headset from the list pairing.
of found devices. When the headset is connected to
5. If necessary, enter the passcode your device and is ready for use, the
0000 to pair and connect the green indicator light flashes about
headset to your device. In some every 5 seconds.
Basic use
Place the headset on the ear Calls
The headset is ready to be used on To make a call, use your mobile
the left ear. To use the headset on device in the normal way when the
the right ear, rotate the earloop so headset is connected to it.
that it is to the right of the Nokia To redial the number you last called
logo (10 and 11). (if your device supports this feature
Slide the earloop behind your ear with the headset), when no call is in
(8), and gently push the earpiece progress, press the answer/end key
against your ear. Push or pull the twice.
earloop to set its length. Point the To activate voice dialling (if your
headset towards your mouth (9). device supports this feature with
the headset), when no call is in
progress, press and hold the answer/ about 2 seconds when the headset
end key for about 2 seconds. is connected to a device.
Proceed as described in the user
guide of your device. Clear settings or reset
To answer or end a call, press the To delete the pairings from the
answer/end key. To reject a call, headset when it is switched off,
press this key twice. press and hold the power key and
the answer/end key (for about 5
To switch a call from the headset to seconds) until the red and green
a compatible device, press and hold indicator lights start to alternate.
the answer/end key for about 2
seconds, or switch off the headset. To reset the headset if it stops
To switch the call back to the functioning, even though it is
headset, press and hold the answer/ charged, connect the headset to a
end key for about 2 seconds, or charger while you press and hold
switch on the headset. the power key.