Professional Documents
Culture Documents
HW 2
HW 2
INS217E-STRENGTH OF MATERİALS I
HW-2
1) The system in the figure is discrete at point C and the gap width is .
a) Draw the normal force diagram
b) Since the force on the bar BC is -P/3, α.ΔT=?
2) All cables have axial rigidity EA, length 5L and the ratio of right triangles is 3, 4, 5. The cable
stretched as much as the gap () is tied to the top of the pole and then released. Determine the cable
forces and the angle of rotation of the pole. The gap is << 5L.
1
DEPARTMENT OF CIVIL ENGINEERING
INS217E-STRENGTH OF MATERİALS I
HW-2