H4000
Woltmann cold water meters
[aN
(11)
Kent Meters ELSTEN-4TER Se SSNs Eee RSME RENEE NOE ES
& Multiple pulsed output for increased
management information
= Extended low and high flow performance
™ Water temperature up to 50°C.
® Suitable for forward and reverse flow metering
™ Robust shroud and copper can register
for long life and clear readability
™ Longer wear life for optimum accuracy
The H4000 is a Woltmann-type meter designed
for measuring bulk flows of cold potable water
for revenue billing in commercial or industrial
applications and distribution system monitoring.
Available
0.35 m'sh and 200 m'sh, che 14000 operates
at temperatures up to 50°C and a maximum.
‘working pressure of 16 Bar. Accuracy
ten sizes for flow races berween,
maintained in both forward and reverse flow,
and various register options are available co
suit different applications. The meter
complies with all relevant international
‘quality standards, substantially exceeding
1504064 885728 Class B specifications for
forward flow installations in horizontal,
vertical and inclined pipelines
Reverse flow metering
Available in sizes up to 125mm, reverse
flow metering aids network management
and ensures accuracy in revenue billing
applications
Robust construction
Like all ABB meters, the H4000 is
manufactured from the highest quality
‘material for maximum resistance to wear and
corrosion. Meter body and cover are epoxy
Seen ave esc for protection inal
‘environments. Thrust pads and stub spindles
are manufaecured in
ngsten carbide and
used for
In-line strainer
‘The use of an ABB in-line strainer is
recommenced to protect the rotor and help
eect of urbitlence.Epoxy powder coated
body and cover.
‘Maximum tong tow
straightening vanes,
Pulse outputs
Palsers designed for use with H4000 meters
offer a choice of outputs for a wide variety of
applications including revenue billing, automatic
meter reading, datalogging and process control
applications. If requited, two pulsers can
simultaneously provide data for both long term
logging and specific fine analysis, enabling,
Ge Ey EG
{Low mass rotor with
hydrodynamic thrust eit
Mult-pulse register.
Hara guriac stor boarings
Jungsiencarbie an
‘symthoto eapphice.
individual measurements to be taken without
intercupting ongoing data capcure. Two types of.
pulser are available: opto-electronic and reed
switch. Both are of durable design and
construction and can easily be fieced on site
without disturbing the calibration seal or
incerrupting the water supply.= Opto-Electronic Pulser
Applications include all forms of high
resolution testing for fine analysis of flow data,
‘Typical uses are step-testing in distribution
systems or for industrial process control. An
electronic citeuit processes the output for
interfacing with other equipment, providing
both bi-directional and uni-directional
information in multiple formats.
Electrical Data
The oupuc stages are transistors configured as
opencollectors with 300 Ohm series resistors
for surge protection, wich InF parallel
capacitors to OV.
Maximum output ‘pull-up’ voleage: 30V de
Maximum output ‘sink’ current: 25mA
Supply voltage: 4.5 to 16V de
‘Typical supply current @ 5V: 350pA,
Mechanical Data
Dimensions:
Sensor: 85mmx30mmx15mm
Elec. Housing: 95mmx40mmx20mm
‘Temperature Range: -10°C co +70°C
Protection Rating: [P68
Cable: 6 core screened, 2m or Sm long with
bare wire termination or fitted wich
compatible plugs.
Also available with a bi-directional NAMUR-
compatible output to DIN 19234.
® Volt-Free Pulser
‘The unie is a uni-directional pulser designed to
interface with almost all datalogger products,
providing a pulse resolution in accord with the
ited position on the register
Electrical Data
‘A100 Ohm resistor is wired in series with the
reed switch for surge protection.
Maximum switching voltage: 24V de
Maximum switching current: 50mA
Maximum switching power: 0.25W
Mechanical Data
Dimensions: 25mm x 20mm x 10mm
‘Temperature Range: -10°C to +70°C.
Protection Rating: IP67
Cable: 2 core, 2m or 5m long with bare
wire termination or fitted with
compatible plugs.
Also available with a factory fitted Pulse-
Splitter to provide two diode-isolated pulse
outputs.
Pulse output 40mm - 125mm Pulse output 150mm - 300mm
geet 710-1100 1:10 fon iT 100 1:1000_1:10000
Cntion optical Rood __Reod Rood OP" opticas Rood ood __—Raod
x v x v
a recone aesataserceceeeacey eeeeeenCeRSSeea 7 Z z—
c v Z v c v z ¢
1 pulse! 4 pulser 1 pulser 1 pulses
1 hve 1000 tires solve 10000 lites
(optica (een) (epticay reed)
1 pulser 1 pulsel 1 pulsar
= 100 es 400 litres 1000 fre
(reed) (280) (000
asraion ac fr diagtammaricl purposes only.4000
Performance to 1S04064, BS5728 Class B
Specifications
4000 Performance (forward flow)
one eres
re
Permanent flow qp22% mn 50 50 65 120180 180 450700 -1000_—*1500
ee eee eee ene eae
‘Starting flow (approx.) mn 045 016 017 022 025 025 090 12 18 18
eS SSeS
Standard 1SO4064/BS5728/EEC specification Class B
Sea ee ee ea een eee
Seuuniy gee
ee
‘Minimum flow: gmins5% min = 045 075 1.2 1a 8 64s SO 18
oe
pis ee
T 3 po Sa T
3 |
e |
| age 8
|
al
Dimensions and weights
eran a
ee ee
‘Weight (Kent) kg 12 “= 17.6 23.6 = = cy - -ee
Performance to ISO4064, BS5728 Class B
Typical Accuracy Curve ‘Typical Head Loss Curve
| ge ss
min mcormowen gS 7
a ff ihe $04 bey SF hae
RATE OF FLOW (an)
ELSTER
Kent Meters
titan England
Marketed in India by:
8.8. ENGINEERING INDUSTRIES
{Ohision of SS. Applances (P) Lid)
G15, Sector? INDIA
PH. 1 (0120) 2423193, 242882, 2428007, 2428508
Fax $0120) 2409054 “Tre Campa pli sone of conte
"aly ne apoorcabove nent Nee,
esoraszar