Professional Documents
Culture Documents
NB45 003 HP900 E0128
NB45 003 HP900 E0128
6. Pflichtenheft/Spezifikation ja/nein
8. Programmstatus
Entwicklungs-/
Änd.-Stand // Erstellungsdatum /
Dateiname / FileName
Version Build date
Absolutfile:
Datum/
Date Name Benennung:
Bearb.
SOFTWARE - Beschreibung
Gepr.
Norm
Zu NSC Radar Software
Freigegeben:
Zeichnungsnummer / Drawing number:
Page /
Blatt 1
NB45-003.HP900 von 15
Content
9 SCOPE 3
9.1 Standard Radar Installation via USB-Stick 3
10.4.2 Updating 15
FÜR DIESE TECHNISCHE UNTERLAGE BEHALTEN WIR UNS ALLE RECHTE VOR.
FOR THIS TECHNICAL DOCUMENT ALL RIGHTS RESERVED.
Datum/
Date Name Benennung:
Bearb.
SOFTWARE - Beschreibung
Gepr.
Norm
Zu NSC Radar Software
Freigegeben:
Zeichnungsnummer / Drawing number:
Page /
Blatt 2
NB45-003.HP900 von 15
9 Scope
General Background:
The main part is a batch file, witch does call every self extracting archive file for the NSC Processor after
each other.
The archive does unzip the software and copies them to the right directories on the USB-Stick.
If the Operating System of the NSC Radar shall be updated too, the USB-Stick has to be formatted as a
bootable device for USB-ZIP drive.
FÜR DIESE TECHNISCHE UNTERLAGE BEHALTEN WIR UNS ALLE RECHTE VOR.
FOR THIS TECHNICAL DOCUMENT ALL RIGHTS RESERVED.
Datum/
Date Name Benennung:
Bearb.
SOFTWARE - Beschreibung
Gepr.
Norm
Zu NSC Radar Software
Freigegeben:
Zeichnungsnummer / Drawing number:
Page /
Blatt 3
NB45-003.HP900 von 15
The configuration is a collection of files, which is stored on a USB-Stick. The USB Stick MUST be a Update
Stick, with the Radar Software on it.
IMPORTANT: This configuration must send back to Raytheon Anschütz for put them into
archives
FÜR DIESE TECHNISCHE UNTERLAGE BEHALTEN WIR UNS ALLE RECHTE VOR.
FOR THIS TECHNICAL DOCUMENT ALL RIGHTS RESERVED.
Datum/
Date Name Benennung:
Bearb.
SOFTWARE - Beschreibung
Gepr.
Norm
Zu NSC Radar Software
Freigegeben:
Zeichnungsnummer / Drawing number:
Page /
Blatt 4
NB45-003.HP900 von 15
♦ Destination disk / path shall be the letter of the USB-Stick. No further Path is required.
♦ On the USB Stick the path „UPDATE“ is generated.
♦ If there are already files on the stick, e.g. update.bat, „all“ shall be pressed for confirming the overwriting
of all files.
♦ The directory UPDATE content the following files
FOR THIS TECHNICAL DOCUMENT ALL RIGHTS RESERVED.
♦ Update.bat
♦ Updatestart.bat
Datum/
Date Name Benennung:
Bearb.
SOFTWARE - Beschreibung
Gepr.
Norm
Zu NSC Radar Software
Freigegeben:
Zeichnungsnummer / Drawing number:
Page /
Blatt 5
NB45-003.HP900 von 15
♦ You need to tell the system the type of the device by choosing the correct drawing number.
♦ Chart Radar and other non standard systems needs a ‘4’ for other as input and a new dialog appears:
FOR THIS TECHNICAL DOCUMENT ALL RIGHTS RESERVED.
Datum/
Date Name Benennung:
Bearb.
SOFTWARE - Beschreibung
Gepr.
Norm
Zu NSC Radar Software
Freigegeben:
Zeichnungsnummer / Drawing number:
Page /
Blatt 6
NB45-003.HP900 von 15
♦ The further Updateprocess is controlled via a DOS-Command window and runs with one exception
complete automaticly without operator interaction.
Update Steps:
♦ Search for an Update on the USB Stick
♦ Search for an already installed software on the NSC Processor
♦ Delete the old installation on the NSC Processor
♦ Unzip and copy all needed software components
♦ Setup Registry
♦ The command window will show 14 different steps during the update.
♦ In Step 13 the flash procedure for the Fujitsu shall be done.
♦ Press “Full Operation”
♦ If a message in this Programmer window appears, that the flash process fails with no success, try it
again.
FÜR DIESE TECHNISCHE UNTERLAGE BEHALTEN WIR UNS ALLE RECHTE VOR.
♦ For NSC M Processor Hardware (950-005.NGxxx/Saxxx), witch was installed with a complete new
operating system ( Raytheon Windows Image PROG0109) , the flashing of the Fujitsu Software was
FOR THIS TECHNICAL DOCUMENT ALL RIGHTS RESERVED.
prompted by an information window to be flashed after the first reboot after the update process.by starting
Fujitsu flashing via eggshell entry.
Datum/
Date Name Benennung:
Bearb.
SOFTWARE - Beschreibung
Gepr.
Norm
Zu NSC Radar Software
Freigegeben:
Zeichnungsnummer / Drawing number:
Page /
Blatt 7
NB45-003.HP900 von 15
Datum/
Date Name Benennung:
Bearb.
SOFTWARE - Beschreibung
Gepr.
Norm
Zu NSC Radar Software
Freigegeben:
Zeichnungsnummer / Drawing number:
Page /
Blatt 8
NB45-003.HP900 von 15
♦ When the Update is done on a version E01.00 or older, the system needs FOUR automatic
reboot sequences. This must be confirmed in an extra message box:
FÜR DIESE TECHNISCHE UNTERLAGE BEHALTEN WIR UNS ALLE RECHTE VOR.
FOR THIS TECHNICAL DOCUMENT ALL RIGHTS RESERVED.
REMARK:
After booting the Radar, the Radar Application is started automatically without showing the eggshell.
Datum/
Date Name Benennung:
Bearb.
SOFTWARE - Beschreibung
Gepr.
Norm
Zu NSC Radar Software
Freigegeben:
Zeichnungsnummer / Drawing number:
Page /
Blatt 9
NB45-003.HP900 von 15
Datum/
Date Name Benennung:
Bearb.
SOFTWARE - Beschreibung
Gepr.
Norm
Zu NSC Radar Software
Freigegeben:
Zeichnungsnummer / Drawing number:
Page /
Blatt 10
NB45-003.HP900 von 15
• You have to tell the system the type of the device by choosing the correct drawing number.
• Chart Radar and other non standard systems needs a ‘4’ for other as input and a new dialog
appears:
FÜR DIESE TECHNISCHE UNTERLAGE BEHALTEN WIR UNS ALLE RECHTE VOR.
FOR THIS TECHNICAL DOCUMENT ALL RIGHTS RESERVED.
Datum/
Date Name Benennung:
Bearb.
SOFTWARE - Beschreibung
Gepr.
Norm
Zu NSC Radar Software
Freigegeben:
Zeichnungsnummer / Drawing number:
Page /
Blatt 11
NB45-003.HP900 von 15
• After pushing the OK button the update is complete. Following dialog appears:
FÜR DIESE TECHNISCHE UNTERLAGE BEHALTEN WIR UNS ALLE RECHTE VOR.
Datum/
Date Name Benennung:
Bearb.
SOFTWARE - Beschreibung
Gepr.
Norm
Zu NSC Radar Software
Freigegeben:
Zeichnungsnummer / Drawing number:
Page /
Blatt 12
NB45-003.HP900 von 15
x10=*Explorer$D:\NSCSetup\CallExplorer.bat
to
x10=Explorer$D:\NSCSetup\CallExplorer.bat
Datum/
Date Name Benennung:
Bearb.
SOFTWARE - Beschreibung
Gepr.
Norm
Zu NSC Radar Software
Freigegeben:
Zeichnungsnummer / Drawing number:
Page /
Blatt 13
NB45-003.HP900 von 15
Datum/
Date Name Benennung:
Bearb.
SOFTWARE - Beschreibung
Gepr.
Norm
Zu NSC Radar Software
Freigegeben:
Zeichnungsnummer / Drawing number:
Page /
Blatt 14
NB45-003.HP900 von 15
x10=Explorer$D:\NSCSetup\CallExplorer.bat
to
x10=*Explorer$D:\NSCSetup\CallExplorer.bat
• Choose “Service Refresh Fujitsu” and push the button “Run Selection”.
• Reboot the system.
10.4.2 Updating
Datum/
Date Name Benennung:
Bearb.
SOFTWARE - Beschreibung
Gepr.
Norm
Zu NSC Radar Software
Freigegeben:
Zeichnungsnummer / Drawing number:
Page /
Blatt 15
NB45-003.HP900 von 15