Professional Documents
Culture Documents
Tablet Pressing Cataglog
Tablet Pressing Cataglog
20 HRC-S Series
21 · Product Specification
STRUCTURE
HMI System
As a key product of Sejong Pharmatech, the rotary tablet press has a competitive edge in the global Function to determine the operating rights depending Function to enable users to check various production data by
on supervisors' levels. different products, manufacture' s serial numbers, users, etc.
market.
Sejong Pharmatech's rotary tablet press line includes the GRC series, MRC series, and HRC series and can
access real-time based production data management with HMI system. Also, it embraces the features of
the most efficient cutting-edge technologies to ensure optimum tablet production.
All rotary tablet presses in the line are designed to be modified and adjusted in a variety of ways and to
meet optimum production efficiency and quality conditions.
They are designed to maintain optimum conditions for essential production conditions such as thickness
and hardness of tablet in order to ensure maximum tablet production. In particular, they are designed to
be compatible with GMP standards in other countries, and produced in accordance with thorough and
strict quality control criteria. We have obtained CE Mark certification from TUV-PC, Germany to achieve
quality standardization of all production equipment.
STRUCTURE
· AWC Parameter
· Tightness
Function to enter manufacturing information such as the upper and
lower limit of thickness, weight, and others for accurate operation of A window through to show the upper punch tight, the
automatic weight control system. lower punch tight and ejection force (Discharge pressure).
STRUCTURE
Servo Motor
and Compression Roll
To reduce the problems such as capping that
might occur during tablet production, these
machines were designed to have pre-load and
main load roll assemblies in the same structure and
to exactly divide their locations to distribute loads
on the machine and at the same time pressure on
tablets.
You can easily manipulate the upper and lower
compression rolls by servo motor and the height
adjustment of disk lifting device and the values will
be displayed digitally on the operation panel.
Exclude Model
· GRC-S Series
· MRC-D Series
Mechanical Feeder
Safety Message Function Implement auto-sampling function
By simplifying the assembly of the connection between powder hopper
and mechanical feeder, it is easier to check the powder supply status
to the first layer of the double-layer
through transparent acrylic pipe and sensors and automatically provides tablet
powder in case of machinery stoppage or the attachment of powder
loading system (option). Basic safety measure against any possible danger for user and A adopted "auto-sampling function to the first layer of the
You can easily mount and dismount a mechanical feeder by releasing the machine safety. double-layer tablets during production process" for the double-
left and right handles, while improving assembly method of the This safety function is triggered when machine fails to operate; layer production models, MRC-D and HRC-S series, in all our
mechanical feeder stand to achieve simple disassembly and assembly, time it pops up a safe message that explains the cause of machine rotary tablet press lines.
saving for easy maintenance and repair failure on the operating screen with an alarm sound. Unlike the previous method that requires halting the machine
If you click the icons, it will show detailed information on the for sampling, it is designed to automatically carry out "sampling
cause of the problem and how to solve, etc. of the first layer of the double tablets" during the production
- E.M.G S/W Pushing - Insert Handle - Feeder Overload process by a simple operation from the operation panel during
- Scraper Alarm - Dust Collector Trip - Low Air Pressure full operation of machine, thereby ensuring a decrease in defect
· Disk Change Set-up Function - Upper Punch Tightness - Ejection Force Alarm - Linear Alarm rates and accurate double-layer tablet production.
- Upper Punch Safety Rail - Door Opened - AWC Stop With the aid of this function, after the initial setting for double-
Function to aid easy disk replacement, by setting up the top height - Main Motor Overload - Powder Shortage - Interruption layer tablets, users can carry out automatic sampling when they
value of upper pressure roll, the top height value of disk, and the lowest - Target Quantity Stop - Lower Punch Tightness - Hydraulic Alarm need to measure the weight, thickness, and hardness of the first
value of operation stand. - Oil Lubrication Alarm - Lower Punch Safety Rail layer of the tablets anytime during production
GRC-S Series
Rotary
Tablet Press
MRC-S Series
GRC-S Series
GRC-15S / GRC-18S / GRC-22S
GRC-S series of Sejong Pharmatech is designed and produced to be suitable for pharmaceutical company's
labs, university research institutes, or small-scale production lines, while being characterized
by simple but all-inclusive functions for tablet production.
In particular, GRC-S series is a small tablet press that is able to produce a maximum of 132,000 tablets per
hour and is aided by AWC system
to produce tablet exactly as required.
It implements a powder feeding system with a mechanical feed as a basic option (customers can also select
an open feeder as an option).
Also, its large touch screen of 15 inches enables the user to easily operate the machine.
GRC-S Series
2 A.W.C
3 Power Loading System (Option)
4 Metal Detector (Option)
5 Dust Collector (Option)
6 U.T.S (Option)
7 Deduster (Option)
Model
Description
GRC-15S GRC-18S GRC-22S
Number of Stations 15 18 22
Pitch Circle Diameter (Ø) 210
Top View
Max. Output ( Hour ) 90,000 108,000 132,000
Revolution of Disk (R.P.M) 15-100 15-100 15-100
※ Pre- pressure and Main pressure could be changed depending on the size of the compress and filling depth, powder or granulation.
It is dependent on the physical specification of the used material for the compress.
※ The above specification is subject to change without prior notice for the technical development.
※ The disk revolution speed is standard of round type.
Product Specification
MRC-S Series
Model
Description
MRC-31S MRC-37S MRC-45S MRC-47S
Number of Stations 31 37 45 47
Pitch Circle Diameter (Ø) 420
Max. Output ( Hour ) 186,000 222,000 270,000 282,000
Revolution of Disk (R.P.M) 15-100 15-100 15-100 15-100
MRC-S Series
Machine Excluding Hopper 2,024
Height (mm) Including Hopper 2,147
Machine Floor Space (mm) 1,100 X 1,550
Top View
Front View
MRC-D Series
MRC-39D / MRC-49D / MRC-61D
One of the key features of MRC-D series lies in the fact that it can produce double-layer tablets and in case of
the production of single-layer tablets, it is possible to increase productivity two-fold by applying a double-
sided discharge system.
Also, compared with the HRC-S model of Sejong, though it is relatively smaller in appearance, it enables mass-
Side View production.
In producing double-layer tablets, in particular, it is equipped with a powder retrieval function to minimize
color mixing between different tablet layers, thereby ensuring more effective double-layer tablet production.
It applies 580mm disk PCD to increase output per hour by about 14% while decreasing noise by increasing the
up and down curve section of a punch.
- Apply 580mm disk PCD to increase output per hour by about 14% while decreasing noise by increasing the up and down curve
section of a punch.
- Since the dust collector is designed as all-in-one type from the outlet scraper to discharge chute, it makes dust collecting more
effective and reduces dust inside the machine.
- As it adopts the all-in-one type Feeder Driving Shaft Housing method, it is easy to disassemble, assemble, and repair and maintain.
- Adopted implement auto-sampling function to the first layer of the double-layer tablet
MRC-D Series
4 Metal Detector (Option)
5 Dust Collector (Option)
6 Disk Table (Option)
7 U.T.S (Option)
8 Deduster (Option)
9 C.A.F (Option)
Model
Description 10 Magnesium Spray System (Option)
MRC-39D MRC-49D MRC-61D
Number of Stations 39 49 61
Pitch Circle Diameter (Ø) 580
12.5-18
16.5-22 (Option) ·
Upper Punch Insert (mm) 1-6
Max. Pre Pressure (kg.f) 3,000 3,000 3,000
Max. Main Pressure (kg.f) 10,000 10,000 10,000
Die Type D B BB
Punch Type EU-D, TSM-D EU-B, TSM-B EU-B, TSM-B
※ Pre- pressure and Main pressure could be changed depending on the size of the compress and filling depth, powder or granulation.
It is dependent on the physical specification of the used material for the compress.
※ The above specification is subject to change without prior notice for the technical development.
※ The disk revolution speed is standard of round type.
Product Specification
HRC-S Series
Model
Description
HRC-51S HRC-65S HRC-77S HRC-83S
Number of Stations 51 65 77 83
Pitch Circle Diameter (Ø) 720
HRC-S Series
12.5-18
16.5-22 (Option) ·
Upper Punch Insert (mm) 1-6
HRC-51S / HRC-65S / HRC-77S / HRC-83S Max. Pre Pressure (kg.f) 10,000 8,000 8,000 8,000
Max. Main Pressure (kg.f) 10,000 8,000 8,000 8,000
New HRC-S series rotary tablet press is a representative tablet press line of Sejong Pharmatech. Using HMI system,
Die Type D B BB BBB
it collects data perfectly and provides production data on a real-time basis, while storing and managing data to
ensure more stable productivity. This series is able to produce double-side or two-layer tablets and is ideal for Punch Type EU-D, TSM-D EU-B, TSM-B EU-B, TSM-B EU-B, TSM-B
mass production-oriented production lines. Excluding Hopper 2,008
Machine
The advanced structure of the equipment is more solid to withstand pre- and main compression forces and its disk Height (mm)
change system that uses a disk lifting device ensures maximum productivity at lower costs. With an automatic Including Hopper 2,144
lubricator as a basic option, HRC-S series allows a significant drop in maintenance costs due to reduced wear on Machine Floor Space (mm) 1,680 X 2,010
punch and rails and adopts specifically designed cast-frame structure to minimize vibrations and noise during Weight of Machine (kg) Approx. 5,000
tablet production. Sejong Pharmatech's HRC-S series is the best solution for customer's productivity
improvement and cost reduction during mass production. Power of Main Motor 15hp (11kW)
- With the use of a large 15-inch touch screen, easy to access and operate via user interface. Power Supply Data 220 / 380 / 400 / 415 / 440 V, 50 / 60 Hz, 3Phase
-A dopted AWC system (Automatic Weight Control) allows production of tables with more accurate quantity.
-U sing HMI system, it collects data perfectly and provides production data on a real-time basis, ※ Pre- pressure and Main pressure could be changed depending on the size of the compress and filling depth, powder or granulation.
while storing and managing data to ensure more stable productivity. It is dependent on the physical specification of the used material for the compress.
-A s it adopts a disk change system that uses disk lifting device, it maximizes productivity at lower costs. ※ The above specification is subject to change without prior notice for the technical development.
- Able to double-side discharge and produce two-layer tablets. ※ The disk revolution speed is standard of round type.
- Adopted implement auto-sampling function to the first layer of the double-layer tablet.
-D esigned to support easy disassembly and assembly so as to ensure convenient repair and maintenance.
- S pecifically designed special cast-frame structure to minimize vibrations and noises during tablet production.
Front View
Dust Collector
Connected to the main body, it enables work in a pleasant environment
by powerfully inhaling dust inside the machine.
Also by connecting it to the deduster, it inhales dust coming from the tablets.
Model
Description
OVC-5B OVC-15B OVC-22B OVC-37B OVC-55B
Motor Rating (hp) (kW) 1 (0.75) 2 (1.5) 3 (2.2) 5 (3.7) 7.5 (5.5)
Side View Max Vacuum 60Hz 1,700 2,050 2,200 2,800 3,200
(mmAq ±10%) 50Hz 1,300 1,480 1,632 2,000 2,500
Ø/□ Ø100 Ø100 Ø100 □ 300 □ 300
Option Items
Machine Details
(*) Double layer apply ● Standard ○ Option △ Applicable Soon - Not Applicable