Professional Documents
Culture Documents
Frese OPTIMA Compact DN50-DN300
Frese OPTIMA Compact DN50-DN300
Application
Benefits Features
www.frese.eu
Technote Page 2 of 20
5
4 4
2
3 1
Function
Frese OPTIMA Compact can be flushed and commissioned
Design before the actuator is installed.
The design of Frese OPTIMA Compact combines high perfor- The presetting of the dial is user-friendly requiring only a simple
mance and a compact design. flow vs. presetting graph.
The main components of the valve are:
Once the flow is set, the actuator can be mounted and the valve
1 Differential pressure control ready to operate.
2 Modulating control component For lowest energy consumption, check the differential pressure
at the index valve to set the pump at minimum speed.
3 Presetting scale 3
www.frese.eu
Technote Page 3 of 20
Operation principle
The innovative design of Frese OPTIMA Compact features a Whilst the control component provides proportional
modulating control component that retains 100% authority at all modulation irrespective of the preset flow, the automatic
times. balancing guarantees that the flow will never exceed the
maximum preset flow.
With the Frese OPTIMA Compact there are two independent
movements for the presetting and the modulating function. Regardless of pressure fluctuations in the system, the
During presetting, the inlet area moves radially without interfering maximum flow is kept constant up to a maximum
with the length of the stroke. During modulating, the inlet area differential pressure of 800 kPa.
moves axial taking advantage of the full stroke.
Flow (l/h)
Flow rate vs. Voltage 30000
Pre-set
25000 4
G
flow setting and available pressure. LO
1
5000
Because of the independent characteristic the actuator setting can
be used to change the valve response from linear to logarithmic
(Equal Percentage). 2 4
Voltage (V)
6 8 10
20000
18000
16000 7V
14000
Voltage: 10V, 7V, 3V
Ball Valve
12000
(Liniar actuator characteristic) 10000
8000 3V
6000
4000
2000
0
0 100 200 300 400 500 600 700 800
Differential pressure (kPa)
www.frese.eu
Technote Page 4 of 20
Flow
Dim. DN50 DN65 DN80
Type LF HF LF HF LF HF
m /h
3
2.48 - 15.00 3.92 - 24.00 4.38 - 25.00 5.95 - 35.00 5.34 - 34.00 7.02 - 43.00
Flow l/s 0.689 - 4.167 1.089 - 6.667 1.216 - 6.945 1.654 - 9.724 1.484 - 9.450 1.951 - 11.954
gpm 10.92 - 66.03 17.28 - 105.65 19.27 - 110.06 26.21 - 154.11 25.53 - 149.78 30.92 - 189.47
www.frese.eu
Technote Page 5 of 20
Flow
Dim. DN100 DN125 DN150
Type LF HF LF HF LF HF
m /h
3
12.1- 68.0 14.8 - 90.0 18.5 -110.0 23.0 - 135.0 25.6 - 148.0 32.0 - 195.0
Flow l/s 2.917 - 19.444 3.750 - 25.000 5.139 - 30.556 6.389 - 37.500 7.111 - 41.110 8.889 - 54.168
gpm 46.23-308.20 59.44-396.26 81.45-484.32 101.26-594.39 112.71-651.59 140.89-858.56
www.frese.eu
Technote Page 6 of 20
H2
H1
Pressure class: PN16/25
Stroke DN200 43 mm
Stroke DN250-DN300 48 mm
Flange connections: ISO 7005-2/EN 1092-2
Max. differential pressure: 800 kPa
H
Flow
Dim. DN200 DN250 DN300
Type LF HF LF HF LF HF
m /h
3
95 - 210 130 - 280 190 - 475 245 - 600 190 - 475 245 - 600
Flow l/s 26.39 - 58.33 36.11 - 77.78 52.78 - 131.94 68.06 - 166.67 52.78 - 131.94 68.06 - 166.67
gpm 418 - 925 572 - 1233 837 - 2091 1079 - 2642 837 - 2091 1079 - 2642
www.frese.eu
Technote Page 7 of 20
www.frese.eu
Technote Page 8 of 20
2.78 10.0 12
1.39 5.0
6.5
0 0
0 1 2 3 4
Pre-set
6.11 22.0
5.56 20.0
5.00 18.0
30
4.44 16.0
3.89 14.0
3.33 12.0
21
2.78 10.0
EN Frese OPTIMA Compact DN50-DN300 SEP 17
2.22 8.0
1.67 6.0 19
1.11 4.0
0.83 2.0
0 0
0 1 2 3 4
Pre-set
www.frese.eu
Technote Page 9 of 20
5.56 20.0
20
4.17 15.0
18
2.78 10.0
15
1.39 5.0
0 0
0 1 2 3 4
Pre-set
8.33 30.0
6.94 25.0
35
5.56 20.0
32
4.17 15.0
EN Frese OPTIMA Compact DN50-DN300 SEP 17
2.78 10.0
30
1.39 5.0
0 0
0 1 2 3 4
Pre-set
www.frese.eu
Technote Page 10 of 20
8.33 30.0
6.94 25.0
20
5.56 20.0
4.17 15.0 18
2.78 10.0
16
1.39 5.0
0 0
0 1 2 3 4
Pre-set
11.11 40.0
9.72 35.0
8.33 30.0 30
6.94 25.0
5.56 20.0 25
EN Frese OPTIMA Compact DN50-DN300 SEP 17
4.17 15.0
23
2.78 10.0
1.39 5.0
0 0
0 1 2 3 4
Pre-set
www.frese.eu
Technote Page 11 of 20
16.67 60.0
13.89 50.0
25
11.11 40.0
8.33 30.0 22
5.56 20.0
20
2.78 10.0
0 0
0 1 2 3 4
Pre-set
22.22 80.0
19.44 70.0
16.67 60.0
45
13.89 50.0
11.11 40.0
35
EN Frese OPTIMA Compact DN50-DN300 SEP 17
8.33 30.0
30
5.56 20.0
2.78 10.0
0 0
0 1 2 3 4
Pre-set
www.frese.eu
Technote Page 12 of 20
27.78 100.0
25.00 90.0
22.22 80.0
21
19.44 70.0
16.67 60.0
13.89 50.0 18
11.11 40.0
8.33 30.0 16
5.56 20.0
2.78 10.0
0.0 0.0
0 1 2 3 4
Pre-set
33.33 120.0
30.56 110.0
27.78 100.0
33
25.00 90.0
22.22 80.0
19.44 70.0
29
16.67 60.0
13.89 50.0
EN Frese OPTIMA Compact DN50-DN300 SEP 17
11.11 40.0
27
8.33 30.0
5.56 20.0
2.78 10.0
0.0 0.0
0 1 2 3 4
Pre-set
www.frese.eu
Technote Page 13 of 20
16.67 60.0
13.89 50.0
11.11 40.0 21
8.33 30.0
5.56 20.0
2.78 10.0
0.0 0.0
0 1 2 3 4
Pre-set
16.67 60.0
13.89 50.0 33
11.11 40.0
8.33 30.0
5.56 20.0
2.78 10.0
0.0 0.0
0 1 2 3 4
Pre-set
www.frese.eu
Technote Page 14 of 20
50.00 180
24
44.44 160
38.89 140
16
33.33 120
27.78 100
11
22.22 80
16.67 60
11.11 40
5.56 20
0.0 0
0 1 2 3 4
Pre-set
77.78 280 78
72.22 260
66.67 240
61.11 220 61
55.56 200
50.00 180
41
44.44 160
38.89 140
31
33.33 120
EN Frese OPTIMA Compact DN50-DN300 SEP 17
27.78 100
22.22 80
16.67 60
11.11 40
5.56 20
0 0
0 1 2 3 4
Pre-set
www.frese.eu
Technote Page 15 of 20
111.11 400
97.22 350
25
83.33 300
15
69.44 250
55.56 200
10
41.67 150
27.78 100
13.89 50
0.0 0
0 1 2 3 4
Pre-set
152.78 550
138.89 500
125.00 450 45
111.11 400
97.22 350
25
83.33 300
69.44 250 15
55.56 200
EN Frese OPTIMA Compact DN50-DN300 SEP 17
41.67 150
27.78 100
13.89 50
0.0 0
0 1 2 3 4
Pre-set
www.frese.eu
Technote Page 16 of 20
111.11 400
97.22 350
25
83.33 300
15
69.44 250
55.56 200
10
41.67 150
27.78 100
13.89 50
0.0 0
0 1 2 3 4
Pre-set
152.78 550
138.89 500
125.00 450 45
111.11 400
97.22 350
25
83.33 300
69.44 250 15
55.56 200
EN Frese OPTIMA Compact DN50-DN300 SEP 17
41.67 150
27.78 100
13.89 50
0.0 0
0 1 2 3 4
Pre-set
www.frese.eu
Technote Page 17 of 20
www.frese.eu
Technote Page 18 of 20
www.frese.eu
Technote Page 19 of 20
www.frese.eu
Technote Page 20 of 20
Documentation formula
Valve ID Valve type Dimension Pre-setting Verified Δp Min. Δp Flow
(own choice) [kPa] (see flow rate graph)
[kPa]
www.frese.eu