Type 01B
5-30A
240 Vac
50 Hz
CL-1 Genus Power Infrastructures Ltd., Haridwar (india)
6LOWPAN LPREF communication
3200
imp/k¥?h
= 9)5 a
Genus se Genus Bei ines ructures Ltd,Hdr
eave -30A, 240V,CL-1
As Per IS 13779:1999
Meter Serial No. : ee
Date: 4/2022
No Load Ok, HV Test ai oR Test OK. Starting Current Ok
ee
% Error
U1 = 240 11 = 900%Ib PF = 1 0.07 %
Load Points
U1 = 240 11=900%lb PF =0.5 -0.08 %
U1 =240 11 =100%lb PF =1 -0.06 %
=240 1 ee
240 1 = 100%Ib PF =-08 0.02 %
-0.06 %
= 100%lb PF =0.5
-0.24%
-0.13 %
Testing Incharge:- Nitin Saini
U1=Applied Voltage,I11=% OF Basic Current
____ This is System Generated reporta ————————
Génus
energizing lives
User Manual
> In
. enn Specifications
* Display Detaisg
¢ Connections
* Installation
% Safety
* Contact us
INTRODUCTION;
GENUS Single Phase 2 Wire kWh Meter is an Electronic Energy Meter which is
Suitable Sor metering in 1 Phase 2 Wire distribution system for residential and
commercial applications,
This meter is based on Micro-Controller for meeting power and energy
measurement requirements.
TECHNICAL SPECIFICA TIONS
[ Connection Type 1-Phase, 2-Wire, AC Static Energy Meter
Class 1.0 Compliance as per 1S:13773/1EC62052-11/
Aru 1£C62053-21
Rated Voltage 240V/230V/ 220V (Operating range -40% to +20%)
5-20A/ 5-30A/ 10-60A/ 20-80A
or as per requirement
Active Energy(kWh), Max Demand (kw)
Measured value/ units Phase Voltage (V), Line Current (A)
Power Factor Range As per 1S:13779/IEC62052-11/1EC62053-21
Frequency 50 Hz +5%
i Display LCD with Backlit (Seven Segment display with Icons
for other indications)
Meter has CAL LED which acts as an indication for
Visual indications
availability of CAL pulse.
a Miles‘pica Pod OFA Per oF Pox ——— INSTALLATION:
ete cy en CIN HF cone eth
cemmancerion otonal communication f reaured
‘ne Ph coomon en oo bat meter
‘henszi2coomancetos 7m ha bata meter for
Femperatureronge | As peri33779
NOTE Ft i ia, ng DR PN
peers to the meter pre
DISPLAY DETAILS:
‘Meter Display Parameters can be viewed in auto mode cycle and push
nade cyte by pressing push bution os pe customer requirements
below (Opta
energizing lives
PRECAUTION & SAFETY PRACTICES
1)To minimize the risk of electrical shock, avoid any loose or exposed electrical
connections near the installation.
2) Disconnect the supply during installation and use insulated hand gloves while
working.
3) Always use proper tools and accessories. Avoid using damaged tools
4) Do not use the meter without Terminal Cover. This may cause severe electric shock
4) To prevent any potential damage, always install the meter at a height that is
considered to be safe from street animals (for meter installation in public area).
6) Use the right cross section of cables / conductors for installation.
7) Meter must not be operated beyond the Specified limits. (Refer nameplate for
rating).
8) If equipment is used in a manner not specified by the manufacture, the precision
promised by the equipment may be affected.
OPERATING CONDITION: o°ctos5°c