Professional Documents
Culture Documents
Plate With Columns
Plate With Columns
Nemetschek Scia 1 of 94
Plate with columns 11/25/2008
Nemetschek Scia 2 of 94
Plate with columns 11/25/2008
Nemetschek Scia 3 of 94
Plate with columns 11/25/2008
Nemetschek Scia 4 of 94
Plate with columns 11/25/2008
Nemetschek Scia 5 of 94
Plate with columns 11/25/2008
Nemetschek Scia 6 of 94
Plate with columns 11/25/2008
Nemetschek Scia 7 of 94
Plate with columns 11/25/2008
Nemetschek Scia 8 of 94
Plate with columns 11/25/2008
Nemetschek Scia 9 of 94
Plate with columns 11/25/2008
Nemetschek Scia 10 of 94
Plate with columns 11/25/2008
Nemetschek Scia 11 of 94
Plate with columns 11/25/2008
Nemetschek Scia 12 of 94
Plate with columns 11/25/2008
Nemetschek Scia 13 of 94
Plate with columns 11/25/2008
Nemetschek Scia 14 of 94
Plate with columns 11/25/2008
Choose the option 'General XYZ'. This is the only possibility because of the fact that both 1D and 2D elements will be
used.
Nemetschek Scia 15 of 94
Plate with columns 11/25/2008
Nemetschek Scia 16 of 94
Plate with columns 11/25/2008
Nemetschek Scia 17 of 94
Plate with columns 11/25/2008
Nemetschek Scia 18 of 94
Plate with columns 11/25/2008
Click OK
Nemetschek Scia 19 of 94
Plate with columns 11/25/2008
First of all, a view in direction Z is taken for the input of the horizontal plate
Nemetschek Scia 20 of 94
Plate with columns 11/25/2008
Select 2D member
Nemetschek Scia 21 of 94
Plate with columns 11/25/2008
Nemetschek Scia 22 of 94
Plate with columns 11/25/2008
The property menu of the plate opens. Here the parameters can be regarded and adapted if desired.
Nemetschek Scia 23 of 94
Plate with columns 11/25/2008
Nemetschek Scia 24 of 94
Plate with columns 11/25/2008
Click OK
Nemetschek Scia 25 of 94
Plate with columns 11/25/2008
Nemetschek Scia 26 of 94
Plate with columns 11/25/2008
Nemetschek Scia 27 of 94
Plate with columns 11/25/2008
Nemetschek Scia 28 of 94
Plate with columns 11/25/2008
Nemetschek Scia 29 of 94
Plate with columns 11/25/2008
Nemetschek Scia 30 of 94
Plate with columns 11/25/2008
Nemetschek Scia 31 of 94
Plate with columns 11/25/2008
Nemetschek Scia 32 of 94
Plate with columns 11/25/2008
Now, the columns can be input. The border columns are input in the end points and middle points of the plate. For this,
the parameters of the snap mode have to be verified.
Nemetschek Scia 33 of 94
Plate with columns 11/25/2008
The options Midpoints and Endpoints are checked. So, this is ok and we can close the snap mode.
Click OK
Nemetschek Scia 34 of 94
Plate with columns 11/25/2008
For the internal column, there is no existing node. For this, an internal node (2D member > 2D member components) has
to be inserted.
Nemetschek Scia 35 of 94
Plate with columns 11/25/2008
Nemetschek Scia 36 of 94
Plate with columns 11/25/2008
Nemetschek Scia 37 of 94
Plate with columns 11/25/2008
Nemetschek Scia 38 of 94
Plate with columns 11/25/2008
Nemetschek Scia 39 of 94
Plate with columns 11/25/2008
Nemetschek Scia 40 of 94
Plate with columns 11/25/2008
Nemetschek Scia 41 of 94
Plate with columns 11/25/2008
Nemetschek Scia 42 of 94
Plate with columns 11/25/2008
Nemetschek Scia 43 of 94
Plate with columns 11/25/2008
The Cross-Sections dialog opens. The rectangular concrete section is automatically selected.
Nemetschek Scia 44 of 94
Plate with columns 11/25/2008
Nemetschek Scia 45 of 94
Plate with columns 11/25/2008
Nemetschek Scia 46 of 94
Plate with columns 11/25/2008
Click OK
Nemetschek Scia 47 of 94
Plate with columns 11/25/2008
Click Close
Nemetschek Scia 48 of 94
Plate with columns 11/25/2008
Click Close
Nemetschek Scia 49 of 94
Plate with columns 11/25/2008
Nemetschek Scia 50 of 94
Plate with columns 11/25/2008
Nemetschek Scia 51 of 94
Plate with columns 11/25/2008
Nemetschek Scia 52 of 94
Plate with columns 11/25/2008
Nemetschek Scia 53 of 94
Plate with columns 11/25/2008
Click OK
Nemetschek Scia 54 of 94
Plate with columns 11/25/2008
The columns are inserted in the edge and middle points of the plate
Nemetschek Scia 55 of 94
Plate with columns 11/25/2008
Nemetschek Scia 56 of 94
Plate with columns 11/25/2008
Nemetschek Scia 57 of 94
Plate with columns 11/25/2008
Nemetschek Scia 58 of 94
Plate with columns 11/25/2008
Nemetschek Scia 59 of 94
Plate with columns 11/25/2008
Nemetschek Scia 60 of 94
Plate with columns 11/25/2008
Nemetschek Scia 61 of 94
Plate with columns 11/25/2008
Nemetschek Scia 62 of 94
Plate with columns 11/25/2008
Nemetschek Scia 63 of 94
Plate with columns 11/25/2008
Nemetschek Scia 64 of 94
Plate with columns 11/25/2008
Nemetschek Scia 65 of 94
Plate with columns 11/25/2008
Nemetschek Scia 66 of 94
Plate with columns 11/25/2008
Nemetschek Scia 67 of 94
Plate with columns 11/25/2008
Nemetschek Scia 68 of 94
Plate with columns 11/25/2008
Now, the columns have to be connected with the plate. If this activity is not performed, the structure will become unstable.
So go to 'Connect members/nodes' and select this option.
Nemetschek Scia 69 of 94
Plate with columns 11/25/2008
Click Yes
Nemetschek Scia 70 of 94
Plate with columns 11/25/2008
Nemetschek Scia 71 of 94
Plate with columns 11/25/2008
Click OK
Nemetschek Scia 72 of 94
Plate with columns 11/25/2008
Click OK
Nemetschek Scia 73 of 94
Plate with columns 11/25/2008
Nemetschek Scia 74 of 94
Plate with columns 11/25/2008
Click OK
Nemetschek Scia 75 of 94
Plate with columns 11/25/2008
Nemetschek Scia 76 of 94
Plate with columns 11/25/2008
Nemetschek Scia 77 of 94
Plate with columns 11/25/2008
Now, the supports can be inserted. For this, we can select all the nodes at the bottom by means of the filter.
Nemetschek Scia 78 of 94
Plate with columns 11/25/2008
Nemetschek Scia 79 of 94
Plate with columns 11/25/2008
If one clicks on the icon with the filter, every element with the same property (namely Coord Z) will be selected.
Nemetschek Scia 80 of 94
Plate with columns 11/25/2008
Nemetschek Scia 81 of 94
Plate with columns 11/25/2008
Press Esc
Nemetschek Scia 82 of 94
Plate with columns 11/25/2008
Nemetschek Scia 83 of 94
Plate with columns 11/25/2008
Nemetschek Scia 84 of 94
Plate with columns 11/25/2008
Nemetschek Scia 85 of 94
Plate with columns 11/25/2008
The structure can be shown also as transparant (so the internal column will be also visible) with rendered supports.
For this, go to 'Set view parameters for all' (after clicking on the right mouse button)
Nemetschek Scia 86 of 94
Plate with columns 11/25/2008
Under the tab Misc, the style of the model and loads can be put on rendered.
Nemetschek Scia 87 of 94
Plate with columns 11/25/2008
Select rendered
Nemetschek Scia 88 of 94
Plate with columns 11/25/2008
Nemetschek Scia 89 of 94
Plate with columns 11/25/2008
Nemetschek Scia 90 of 94
Plate with columns 11/25/2008
Nemetschek Scia 91 of 94
Plate with columns 11/25/2008
Nemetschek Scia 92 of 94
Plate with columns 11/25/2008
Nemetschek Scia 93 of 94
Plate with columns 11/25/2008
Nemetschek Scia 94 of 94