Professional Documents
Culture Documents
Attention Power+Generation 526106243 Engine+Diesel+Stationary 25 10 2023
Attention Power+Generation 526106243 Engine+Diesel+Stationary 25 10 2023
Power Generation 526106243 - Engine - Diesel Engine PLTD Kampung Aie - 74446 PLTD Kampung Aie
Diesel Stationary
Sample Information
Sample Number 100736013 100736009 100736006
Sample Condition
Physical Characteristics
Viscosity 100°C cSt 12.66 13.61 10.84
Flash Point (Pass/Fail) °C Pass Pass Pass
TBN (D 2896) mg KOH/g 8.42 8.01 8.01
Wear
Iron (Fe) ppm 6 9 15
Chromium (Cr) ppm 1 1 0
Tin (Sn) ppm 2 0 1
Lead (Pb) ppm 0 0 4
Copper (Cu) ppm 5 23 90
Nickel (Ni) ppm 2 1 1
Aluminium (Al) ppm 1 1 2
Vanadium (V) ppm 0 0 0
Silver (Ag) ppm 0 0 0
Titanium (Ti) ppm 0 0 0
Contamination
Water Content (Aquatest) % 0.11 0.28 0.12
Index of Contamination (IC) % 0.4 0.4 0.6
Merit of Dispersancy (MD) 100 100 100
Demerit Point (DP) 0.0 0.0 0.0
Sodium (Na) ppm 32 47 183
Silicon (Si) ppm 11 11 28
Potassium (K) ppm 107 61 143
Additives
Calcium (Ca) ppm 3927 3809 3464
Zinc (Zn) ppm 1134 1137 1107
Phosphorus (P) ppm 939 971 965
Barium (Ba) ppm 0 0 0
Molybdenum (Mo) ppm 48 46 37
Magnesium (Mg) ppm 12 30 104
Boron (B) ppm 259 283 212
All advice is given in good faith and assumes that the sample fully represents the indicated oil charge. Any recommended values refer to normal ranges. For all queries, please remember to quote your
Sample Number(s). Once printed, this document is un-controlled. For current versions, authorised users should refer to Shell LubeAnalyst online at www.lubeanalyst.shell.com. This report is provided
subject to the general Shell LubeAnalyst Terms and Conditions available at www.lubeanalyst.shell.com.
mg KOH/g
8.4 72
13
ppm
8.3 54
cSt
12 8.2 36
8.1 18
11 8 0
06/08/23
14/08/23
22/08/23
30/08/23
07/09/23
15/09/23
23/09/23
01/10/23
09/10/23
17/10/23
25/10/23
06/08/23
14/08/23
22/08/23
30/08/23
07/09/23
15/09/23
23/09/23
01/10/23
09/10/23
17/10/23
25/10/23
Date drawn Date drawn
Viscosity 100°C (cSt) TBN (D 2896) (mg KOH/g) Iron (Fe) (ppm) Chromium (Cr) (ppm) Tin (Sn) (ppm)
Lead (Pb) (ppm) Copper (Cu) (ppm) Aluminium (Al) (ppm)
Silver (Ag) (ppm)
Contamination Additives
204 0.7 4710
170 0.6 3925
136 0.5 3140
ppm
ppm
2355
%
102 0.4
68 0.3 1570
34 0.2 785
0
06/08/23
14/08/23
22/08/23
30/08/23
07/09/23
15/09/23
23/09/23
01/10/23
09/10/23
17/10/23
25/10/23
06/08/23
14/08/23
22/08/23
30/08/23
07/09/23
15/09/23
23/09/23
01/10/23
09/10/23
17/10/23
25/10/23
Sodium (Na) (ppm) Silicon (Si) (ppm) Calcium (Ca) (ppm) Zinc (Zn) (ppm) Phosphorus (P) (ppm)
Water Content (Aquatest) (%) Index of Contamination (IC) (%) Barium (Ba) (ppm) Molybdenum (Mo) (ppm)
Magnesium (Mg) (ppm) Boron (B) (ppm)
All advice is given in good faith and assumes that the sample fully represents the indicated oil charge. Any recommended values refer to normal ranges. For all queries, please remember to quote your
Sample Number(s). Once printed, this document is un-controlled. For current versions, authorised users should refer to Shell LubeAnalyst online at www.lubeanalyst.shell.com. This report is provided
subject to the general Shell LubeAnalyst Terms and Conditions available at www.lubeanalyst.shell.com.