Professional Documents
Culture Documents
Forest 1.500Km 20.04.23
Forest 1.500Km 20.04.23
ESTIMATE
3- DESIGNS :-
a) Traffic census details are attached or not.
b) C.B.R. value details are attached or not.
c) Details design of overlay is attached or not.
d) Each design has been signed by A.E., E.E.& S.E. in the end and inportant design
by C.E. as well.
4- ANALYSIS OF RATES :-
a) Anaysis of latest Bitumen rates is attached
b) or not.
Required quantity of bitumen for this work
c) hasEach
beenAnalysis
worked out.
of tares has been signed by J.E., A.E.,E.E. & approved by S.E.
5- DETAILS OF MEASUREMENTS :-
a) Each Page has been signed J.E., A.E. and E.E. and the end of each set.
6- BILL OF QUANTITY :-
a) Each bears signed A.E., E.E.
8- PLANTS :-
a) Line diagram on 1=4 mile map with making of road in fed colour
duly signed by J.E., A.E. & conutersigned by S.E.
Plans have been signed by J.E., A.E. & E.E.
b)
9- GENERAL :-
a) Name and designation should exist below of
b) signature
Each pageandon specification.
the designation, analysis of rates, details of the measurements, bill of
quantity and summary of estimate cost should be certified checked and corrected by
Divisional and circle office J.E. (t) with their signature at the end.
Er. AK Rana
1 Er. Satish Kr Gautam
Junior Engineer
Superintending Engineer
Indo-Nepal Border Circle
PWD, Gorakhpur
INDEX OF CONTENT
1 Title Page
3 Index of Content
4 Report
7 Specifications
8 Abstract of Cost
9 R.M.R
10 Details of Measurements
11 Bill of quantity
12 Analysis of Rates.A
Page 2 of 425
P&M-73003 Tipper -14 Cum (Katcha Track) excluding OH & CP 220 Per Tonne Km. 16.24
P&M-74001 Tipper -10 Cum (Surface Road) excluding OH & CP 178 Per Tonne Km. 8.26
P&M-74002 Tipper -10 Cum (Unsurfaced Gravelled Road) excluding OH 178 Per Tonne Km. 10.03
P&M-74003 Tipper -10 Cum (Katcha Track) excluding OH & CP 178 Per Tonne Km. 20.06
P&M-75001 Tipper- 5.5 Cum (Surface Road) excluding OH & CP 90 Per Tonne Km. 11.31
P&M-75002 Tipper- 5.5 Cum (Unsurfaced Gravelled Road) excluding OH 90 Per Tonne Km. 13.75
P&M-75003 Tipper- 5.5 Cum (Katcha Track) excluding OH & CP 90 Per Tonne Km. 27.49
P&M-76001 Transit Mixer - 6 Cum excluding OH & CP Per Tonne Km. 12.77
Loading and unloading of stone boulder / stone aggregates /
P&M-77001 sand / kanker / moorum (Using by 18 cum capacity Tipper Cum 88.41
& 3.1 Cum capacity Loader) excluding OH & CP
Loading and unloading of stone boulder / stone aggregates /
P&M-77002 sand / kanker / moorum (Using by 14 cum capacity Tipper Cum 88.57
& 2.1 Cum
Loading andcapacity Loader)
unloading excluding
of stone boulderOH & CPaggregates /
/ stone
P&M-77003 sand / kanker / moorum (Using by 10 cum capacity Tipper Cum 123.36
& 1.0 Cum capacity Loader) excluding OH & CP
Loading and unloading of stone boulder / stone aggregates /
P&M-77004 sand / kanker / moorum (Using by 5 cum capacity Tipper & Cum 139.06
P&M-77005 1.0 Cum and
Loading capacity Loader)
Unloading excludingorOH
of Cement & CP
Steel by Manual tonne 508.16
Means and water
P&M-78001 Centrifugal Stacking
pump Hour 344.00
P&M-79001 Shredding Machine Hour 500.00
(B) Labour
Page 3 of 425
L-16 Medical Officer day
(C) Materials
M-001 Stone Boulder of size 150 mm and below at Cruser Plant cum
Including
M-002 Supply of quarried stone 150 - 200 mm size for Hand Broken at site cum Carriage - ( L7) -
1 Km.
Including
M-003 Boulder with minimum size of 300 mm for Pitching at Site cum Carriage - ( L7) -
1 Km.
Including
M-004 Coarse sand at Mixing Plant cum 3460.39 Carriage - ( L6) -
1 Km.
Including
M-005 Coarse sand at Site cum 3460.39 Carriage - ( L5) -
1 Km.
Including
M-006 Fine sand at Site cum 900.00 Carriage - ( L5) -
1 Km.
Including
M-007 Moorum at Site cum Carriage - ( L3) -
1 Km.
Including
M-008 Gravel/Quarry spall at Site Cum Carriage - ( L7) -
1 Km.
Including
M-009 Granular Material or hard murrum for GSB works at Site Cum Carriage - ( L3) -
1 Km.
Including
Fly ash conforming to IS: 3812 ( Part II & I) atHMP Plant / Batching Plant /
M-010 Cum Carriage - ( L4) -
Crushing Plant
1 Km.
Including
M-011 Filter media/Filter Material as per Table 300-3 (MoRT&H Specification) at Site Cum Carriage - ( L7) -
1 Km.
Rate at
Plant
Description Unit Rate at Site
(HMP/Batch
ing)
M-012 Close graded Granular sub-base Material 53 mm to 9.5 mm cum 462.15 462.15
M-013 Close graded Granular sub-base Material 37.5 mm to 9.5 mm cum 462.15 462.15
M-014 Close graded Granular sub-base Material 26.5 mm to 9.5 mm cum 463.37 463.37
Page 4 of 425
M-015 Close graded Granular sub-base Material 9.5 mm to 4.75 mm cum 435.11 435.11
M-016 Close graded Granular sub-base Material 9.5 mm to 2.36 mm cum 308.47 308.47
M-017 Close graded Granular sub-base Material 4.75mm to 2.36 mm cum 181.83 181.83
Close graded Granular sub-base Material 4.75mm to 75 micron mm
M-018 cum 181.83 181.83
M-019 Close graded Granular sub-base Material 2.36 mm cum 181.83 181.83
Stone crusher dust finer than 3mm with not more than 10% passing
M-020 cum 181.83 181.83
0.075 sieve.
M-021 Coarse graded Granular sub-base Material 2.36 mm & below cum 181.83 181.83
Coarse graded Granular sub-base Material 4.75mm to 75 micron
M-022 cum 181.83 181.83
mm
M-023 Granular sub-base Material 4.75 mm to 2.36 mm cum 181.83 181.83
M-024 Granular sub-base Material 9.5 mm to 4.75 mm cum 435.11 435.11
M-025 Coarse graded Granular sub-base Material 26.5 mm to 4.75 mm cum 463.37 463.37
M-026 Granular sub-base Material 26.5 mm to 9.5 mm cum 463.37 463.37
M-027 Coarse graded Granular sub-base Material 37.5 mm to 9.5 mm cum 462.15 462.15
M-028 Granular sub-base Material 53 mm to 26 .5mm cum 462.15 462.15
M-029 Aggregates below 5.6 mm cum 181.83 181.83
M-030 Aggregates 22.4 mm to 2.36 mm cum 369.53 369.53
M-031 Aggregates 22.4 mm to 5.6 mm cum 369.53 369.53
M-032 Aggregates 45 mm to 2.8 mm cum 392.07 392.07
M-033 Aggregates 45 mm to 22.4 mm cum 392.07 392.07
M-034 Aggregates 53 mm to 2.8 mm cum 392.07 392.07
M-035 Aggregates 53 mm to 22.4 mm cum 475.66 475.66
M-036 Aggregates 63 mm to 2.8 mm cum 392.07 392.07
M-037 Aggregates 63 mm to 45 mm cum 459.69 459.69
M-038 Aggregates 90 mm to 45 mm cum 459.69 459.69
M-039 Aggregates 10 mm to 5 mm cum 308.47 308.47
M-040 Aggregates 11.2 mm to 0.09 mm cum 308.47 308.47
M-041 Aggregates 13.2 mm to 0.09 mm cum 308.47 308.47
M-042 Aggregates 13.2 mm to 5.6 mm cum 435.11 435.11
M-043 Aggregates 13.2 mm to 10 mm cum 435.11 435.11
M-044 Aggregates 20 mm to 10 mm cum 463.37 463.37
M-045 Aggregates 25 mm to 10 mm cum 463.37 463.37
M-046 Aggregates 19 mm to 6 mm cum 463.37 463.37
M-047 Aggregates 37.5 mm to 19 mm cum 475.66 475.66
M-048 Aggregates 37.5 mm to 25 mm cum 475.66 475.66
M-049 Aggregates 6 mm nominal size cum 435.11 435.11
M-050 Aggregates 10 mm nominal size cum 3735.39 3735.39
M-051 Aggregates 13.2/12.5 mm nominal size cum
M-052 Aggregates 20 mm nominal size cum 4325.39 4325.39
M-053 Aggregates 25 mm nominal size cum 491.63 491.63
M-054 Aggregates 40 mm nominal size cum 4325.39 4325.39
M-055 Crushing of stone aggregates (GSB Crusher Run) cum 586.59 586.59
Sl. No. Description Unit Rate at Site
M-056 AC pipe 100 mm dia metre 750.00
M-057 Acrylic polymer bonding coat litre
M-058 Alluminium Paint litre
Page 5 of 425
M-059 Aluminium alloy plate 2mm Thick sqm
M-060 Aluminium alloy/galvanised steel tonne
Aluminium sheeting fixed with encapsulated lens type reflective sheeting
M-061 including 2% towards lettering, cost of angle iron, cost of drilling holes, nuts, bolts sqm
etc.and signs as applicable
M-062 Aluminium studs 100 x 100 mm fitted with lense reflectors nos
M-063 Barbed wire kg
M-064 Bearing (Cost of parts) nos
M-065 Bearing (Cast steel rocker bearing assembly of 250 tonne ) nos
Bearing (Elastomeric bearing assembly consisting of 7 internal layers of
M-066 elastomer bonded to 6 nos. internal reinforcing steel laminates by the process of nos 7315.53
vulcanisation,)
M-067 Bearing (Forged steel roller bearing of 250 tonne nos
Bearing (Pot type bearing assembly consisting of a metal piston supported by a
disc, PTFE pads providing sliding surfaces against stainless steel mating
M-068 nos
together with cast steel assemblies/fabricated structural steel assemblies duly
painted with all components
M-069 Bearing (PTFE sliding plate bearing assembly of 80 tonnes ) nos
M-070 Bearing (Supply of sliding plate bearing of 80 tonne) nos
M-071 Bentonite kg
M-072 Binding wire kg 90.00
Including
M-073 Bitumen ( Cationic Emulsion ) tonne Carriage - ( L9) -
1 Km.
Including
M-074 Bitumen (60-70 grade) tonne Carriage - ( L9) -
1 Km.
Including
M-075 Bitumen (80-100 grade ) tonne Carriage - ( L9) -
1 Km.
Including
M-076 Bitumen (Cutback ) tonne Carriage - ( L9) -
1 Km.
Including
M-077 Bitumen (emulsion) tonne Carriage - ( L9) -
1 Km.
Including
M-078 Bitumen (modified graded) tonne Carriage - ( L9) -
1 Km.
M-079 Brick each
M-080 C.I.shoes for the pile kg
M-081 Cement tonne 6200.00
M-082 CGI Sheet (0.8 mm thick) kg
M-083 Cold twisted bars (HYSD Bars) tonne 75943.00
M-084 Coller for joints 300 mm dia nos
M-085 Compressible Fibre Board(20mm thick) sqm
M-086 Connectors/ Staples each
M-087 Copper Plate(12m long x 250mmwide) kg
M-088 Corrosion resistant Structural steel tonne 79740.15
M-089 Corrugated sheet, 3 mm thick, "Thrie" beam section railing kg
M-090 Credit for excavated rock found suitable for use cum
M-091 Curing compound liter
M-092 Delineators from ISI certified firm as per the standard drawing given in IRC - 79 each
M-093 Earth Cost or compensation for earth taken from private land cum 120.00
Page 6 of 425
Elastomeric slab seal expansion joint assembly manufactured by using
M-094 chloroprene, elastomer for elastomeric slab unit conforming to clause 915.1 of metre
M-095 IRC: 83compound
Epoxy (part II), with accessories for preparing epoxy mortar kg
M-096 Epoxy mortar kg
M-097 Epoxy primer kg
M-098 Epoxy resin-hardner mix for prime coat kg
M-099 Flag of red color cloth 600 x 600 mm each
M-100 Flowering Plants each
M-101 Galvanised MS flat clamp nos 200.00
Galvanised steel wire crates of mesh size 100 mm x 100 mm woven with 4mm
M-102 sqm
dia. GI wire in rolls of required size.
M-103 Galvanised structural steel plate 200 mm wide, 6 mm thick, 24 m long kg
M-104 Geo grids sqm
M-105 Geomembrane sqm
M-106 Geonets sqm
M-107 Geotextile sqm
M-108 Geotextile filter fabric sqm
M-109 GI bolt 10 mm Dia nos 20.00
M-110 Grouting pump with agitator hour 95.00
M-111 Grass (Doob) kg
M-112 Grass (Fine) kg
M-113 HDPE pipes 75mm dia metre
M-114 HDPE pipes 90mm dia metre
M-115 Hedge plants each
M-116 Helical pipes 600mm diameter metre
M-117 Hot applied thermoplastic compound litre
Including
M-118 HTS strand tonne 75056.25 Carriage - ( L10)
- 1 Km.
M-119 Joint Sealant Compound kg
M-120 Jute netting, open weave, 2.5 cm square opening for seeding and Mulching sqm
M-121 LDO for steam curing litre
M-122 M.S. Clamps nos
M-123 M.S. Clamps kg
M-124 M.S.shoes @ 35 Kg per pile of 15 m kg
M-125 Mild Steel bars tonne
Modular strip/box seal expansion joint including anchorage catering to a
horizontal movement beyond 70 mm and upto 140mm assembly comprising of
M-126 edge beams, central beam,2 modules chloroprene seal, anchorage elements, metre
support and control system, all steel sections protected against corrosion and
Modular strip/box
installed by seal expansion
the manufacturer or hisjoint cateringrepresentative
authorised to a horizontal movement beyond
140mm and upto 210mm box/box seal joint assembly containing 3 modules/cells
M-127 and comprising of edge beams, two central beams, chloroprene seal, anchorage metre
elements, support and control system, all steel sections protected against
corrosion and installed by the manufacturer or his authorised representative
M-128 Nipples 12mm nos
M-129 Nuts and bolts kg 80.00
M-130 Paint litre 250.00
M-131 Pavement Marking Paint litre
M-132 Paving Fabric sqm
M-133 Perforated geosynthetic pipe 150 mm dia metre
M-134 Perforated pipe of cement concrete, internal dia 100 mm metre
M-135 Pesticide kg
M-136 Pipes 200 mm dia, 2.5 m long for drainage metre
Page 7 of 425
M-137 Plastic sheath, 1.25 mm thick for dowel bars sqm
M-138 Plastic tubes 50 cm dia, 1.2 m high nos
M-139 Polymer braids metre
M-140 Pre moulded Joint filler,25 mm thick for expansion joint. sqm
M-141 Pre-coated stone chips of 13.2 mm nominal size cum
Preformed continuous chloroprene elastomer or closed cell foam sealing element
M-142 with high tear strength, vulcanised in a single operation for the full length of a metre
joint to ensure water tightness.
M-143 Pre-moulded asphalt filler board sqm 100.00
M-144 Pre-packed cement based polymer concrete of strength 45 Mpa at 28 days kg
M-145 Primer kg
M-146 Quick setting compound kg
M-147 Random Rubble Stone cum
M-148 RCC Pipe NP 4 heavy duty non presure pipe 1000 mm dia metre
M-149 RCC Pipe NP 4 heavy duty non presure pipe 1200 mm dia metre
M-150 RCC Pipe NP 4 heavy duty non presure pipe 900 mm dia metre
M-151 RCC Pipe NP 4 heavy duty non presure pipe 600 mm dia metre
M-152 RCC Pipe NP 4 heavy duty non presure pipe 300 mm dia metre
M-153 Reflectorising glass beads kg
Reinforcement strips 60 mm wide 5 mm thick as per clause 3102. (Copper
M-154 metre
Strips)
Reinforcement strips 60 mm wide 5 mm thick as per clause 3102. (Galvanised
M-155 metre
carbon steel strips)
Reinforcement strips 60 mm wide 5 mm thick as per clause 3102. (Glass
M-156 metre
reinforced polymer/fibre reinforced polymer/polymeric strips)
Reinforcement strips 60 mm wide 5 mm thick as per clause 3102. (Stainless
M-157 metre
steel strips)
Reinforcement strips 60 mm wide 5 mm thick as per clause 3102. Aluminium
M-158 metre
strips)
M-159 Rivets each
M-160 Sand bags (Cost of sand and Empty cement bag) nos 5.00
M-161 Sapling 2 m high 25 mm dia each
M-162 Scrap tyres of size 900 x 20 nos
M-163 Seeds kg
M-164 Selected earth cum
M-165 Separation Membrane of impermeable plastic sheeting 125 micron thick sqm
M-166 Sheathing duct metre 94.00
M-167 Shrubs each
M-168 Sludge / Farm yard manure @ 0.18 cum per 100 sqm at site of work for turfing cum
M-169 Sodium vapour lamp each
M-170 Square Rubble Coursed Stone cum
Steel circular hollow pole of standard specification for street lighting to mount
M-171 each
light at 5 m height above deck level
Steel circular hollow pole of standard specification for street lighting to mount
M-172 each
light at 9 m height above road level
M-173 Steel drum 300 mm dia 1.2 m high/empty bitumen drum nos
M-174 Steel helmet and cushion block on top of pile head during driving. kg
M-175 Steel pipe 25 mm external dia as per IS:1239 metre
M-176 Steel pipe 50 mm external dia as per IS:1239 metre
M-177 Steel pipe 100 mm external dia as per IS:1239 metre
M-178 Steel wire rope 20 mm kg
M-179 Steel wire rope 40 mm kg
M-180 Strip seal expansion join metre 2923.00
M-181 Structural Steel tonne 79740.15
Page 8 of 425
M-182 Super plastisizer admixture IS marked as per 9103-1999 kg 100.00
Synthetic Geogrids as per clause 3102.8 and approved design and
M-183 sqm
specifications.
M-184 Through and bond stone each
M-185 Tie rods 20mm diameter nos
M-186 Tiles size 300 x 300 mm and 25 mm thick each
M-187 Timber cum
M-188 Traffic cones with 150 mm reflective sleeve nos
M-189 Tube anchorage set complete with bearing plate, permanent wedges etc nos 1395.00
M-190 Unstaked lime tonne
M-191 Water KL 50.00
M-192 Water based cement paint litre 250.00
M-193 Welded steel wire fabric kg
M-194 Wire mesh 50mm x 50mm size of 3mm wire kg
M-195 Wooden ballies 2" Dia for bracing each 100.00
M-196 Wooden ballies 8" Dia and 9 m long each 1100.00
M-197 Wooden packing cum
M-198 Wooden staff for fastening of flag 25 mm dia, one m long each
M-199 Silica Fume Kg
M-200 Synthetic Geogrid Ultimate tensile strength- 100 kN/m sqm
M-201 Synthetic Geogrid Ultimate tensile strength- 150 kN/m sqm
M-202 Synthetic Geogrid Ultimate tensile strength- 200 kN/m sqm
M-203 Synthetic Geogrid Ultimate tensile strength- 250 kN/m sqm
M-204 Synthetic Geogrid Ultimate tensile strength- 300 kN/m sqm
M-205 Synthetic Geogrid Ultimate tensile strength- 350 kN/m sqm
M-206 Synthetic Geogrid Ultimate tensile strength- 400 kN/m sqm
M-207 Synthetic Geogrid Ultimate tensile strength- 500 kN/m sqm
M-208 Synthetic Geogrid Ultimate tensile strength- 600 kN/m sqm
M-209 Synthetic Geogrid Ultimate tensile strength- 700 kN/m sqm
M-210 Synthetic Geogrid Ultimate tensile strength- 800 kN/m sqm
M-211 Synthetic Geogrid Ultimate tensile strength- 900 kN/m sqm
M-212 Synthetic Geogrid Ultimate tensile strength- 1000 kN/m sqm
M-213 Synthetic Geogrid Ultimate tensile strength- 1100 kN/m sqm
M-214 Synthetic Geogrid Ultimate tensile strength- 1200 kN/m sqm
M-215 Explosives for blasting Kg
M-216 Delay Detonators for Nos.
M-217 Electric Detonators Nos.
M-218 Detonation fuse coil Meter
M-219 3.7 m long extension rod boom Hydraulic Drill Jumbo Nos
M-220 32 mm coupling sleeve boom Hydraulic Drill Jumbo Nos
M-221 Difter rod boom Hydraulic Drill Jumbo Nos
M-222 R32 shank adapter boom Hydraulic Drill Jumbo Nos
M-223 45 mm dia Button Bit boom Hydraulic Drill Jumbo Nos
M-224 51 mm dia button bit boom Hydraulic Drill Jumbo Nos
M-225 Steel Fiber tonne
M-226 Microsilica Kg
M-227 Accelerator Kg
M-228 Wiremesh Kg
Page 9 of 425
M-229 Bamboos Meter
M-230 Live Stake Stump Meter
M-231 Hard wood sticks Nos.
M-232 Live Sods (0.6m Length) Nos.
M-233 Live Sods ( 2m Length) tonne
M-234 Coal Tar Epoxy Kg.
M-235 Binding Material Meter
M-236 Spring post 700 mm each
M-237 Spring post 450 mm each
Water Filled Barricades Work zone sheeting (Trapezoidal Shape 800 mm to
M-238 each
1000 mm in length, 700 mm in height)
M-239 GI Pipe 100 mm Dia Meter
M-240 Bracket for GI pipe fixing Kg
M-241 Flange for GI pipe fixing Kg
M-242 Neem Cake Quintal
M-243 Supplying Sludge cum
M-244 Control Centre Server Nos.
M-245 Hot Standby Backup Server Nos.
M-246 NAS Video Server with storage Minimum 70 TB Nos.
M-247 Backup Video (Only Incidents) Server Nos.
M-248 Graphic Display (70" LED DLP in 3x2 matrix) Set
M-249 Graphic Display Controller and software including Video Switches Set
M-250 CCTV Monitoring Workstation Nos.
M-251 Emergency Telephone (1033) console Nos.
M-252 VIDS- Workstation Nos.
M-253 Administrative Workstation Nos.
M-254 ATMS Operator Workstation Nos.
M-255 CCTV Joystick Nos.
M-256 Operations Laser Printer (Colour) Nos.
M-257 Operations Laser Printer (Black) Nos.
M-258 Rack 19" Nos.
M-259 ATMS Control Room Software (integrated with VIDS, ATCC, VMS, MOS) LS
M-260 Video Management Software with atleast 150 VMS Lic. LS
M-261 Facility Monitoring System Controller Software LS
M-262 Server & Database license LS
M-263 Antivirus license LS
M-264 PTZ Camera (including CCTV Controller) Set
M-265 Solar System with UPS, battery & 12m Pole & Cabinet Set
M-266 VIDS Camera (including Image Processing unit) Set
M-267 Warning amber lights with hooters, 72 Hrs solar backup, 5m poles and foundation Set
M-268 Cabinet Nos.
M-269 12 m Pole (including manufacturing and galvanizing) Nos.
M-270 Solar System with UPS & batteries Set
M-271 Equipment, Sensor unit, Processing unit, Solar power supply and civil works for 4 Set
M-272 Solar System with UPS, batteries Set
M-273 VMS (Variable Message Sign - M type) Nos.
M-274 Gantry (including manufacturing and galvanizing) Nos.
M-275 Solar System with UPS, battery and cabinet for M type VMS Set
Page 10 of 425
M-276 Uninterruptible Power Supply (UPS) For Server Rack (10 KVA) Set
M-277 Uninterruptible Power Supply (UPS) For TMC (30 KVA) Set
M-278 Power Distribution Board (Essential & Critical Supply) Set
M-279 MOS sensor Equipment (including MOS Controller) Set
M-280 Cabinet Nos.
M-281 Pole Nos.
M-282 Steel fence for protection Set
M-283 24 Core Armoured OFC + all accessories Meter
M-284 40 mm PLB HDPE duct as per latest TSEC specifications + all accessories Meter
M-285 Trenching of 1.8 meters, Laying & Backfilling for PLB HDPE duct Meter
M-286 Bi-Axial Extruded GeoGrids of Minimum Tensile Strength 15 kN/m sqm
M-287 Bi-Axial Extruded GeoGrids of Minimum Tensile Strength 20 kN/m sqm
M-288 Bi-Axial Extruded GeoGrids of Minimum Tensile Strength 30 kN/m sqm
M-289 Bi-Axial Extruded GeoGrids of Minimum Tensile Strength 40 kN/m sqm
M-290 Geosynthetic Drainage Composite ( tensile strength of 18 kN/m) sqm
M-291 Geosynthetic Drainage Composite (tensile strength of 13.5 kN/ m) sqm
Page 11 of 425
Contractors profit for Road Works 10% 10% 10%
Page 12 of 425
COST OF CARTAGE
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
78 45-90 mm stone Ballast 500.00 35.00 465.00 110.00 355.00 1.00 392 393 2812.18 3167.18 3167.00
78 Sukrut
45-63 mm stone Ballast 580.00 35.00 545.00 110.00 435.00 1.00 392 393 2812.18 3247.18 3247.00
78 22.4-53 mm Ballast 740.00 35.00 705.00 110.00 595.00 1.00 392 393 2812.18 3407.18 3407.00
78 Stone Boulder 715.00 35.00 680.00 110.00 570.00 1.00 392 393 2812.18 3382.18 3382.00
78 22.4mm 1500.00 35.00 1465.00 160.00 1305.00 1.00 440 441 3095.82 4400.82 4401.00
78 19 mm grit. 1450.00 35.00 1415.00 160.00 1255.00 1.00 440 441 3095.82 4350.82 4351.00
78 13.20 mm grit 1150.00 35.00 1115.00 160.00 955.00 1.00 440 441 3095.82 4050.82 4051.00
Dala
78 11.2 mm grit 1100.00 35.00 1065.00 160.00 905.00 1.00 440 441 3095.82 4000.82 4001.00
78 6.7/6mm grit 770.00 35.00 735.00 160.00 575.00 1.00 440 441 3095.82 3670.82 3671.00
78 2.36 mm grit 700.00 35.00 665.00 160.00 505.00 1.00 440 441 3095.82 3600.82 3601.00
Coarse sand
78 (Chopan to GKP Nausar 313)
550.00 35.00 515.00 75.00 440.00 1.00 426 427 3095.82 3535.82 3536.00
JE AE EE SE
PROPOSED ESTIMATE FOR CONSTRUCTION OF RCC BOX CELL BRIDGE CLEAR OPENING 6M X 3M ,CULVERT No 2
Earthwork in excavation for foundation of structures as per drawing and technical specification including setting out, removing, spreading or
stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom,
complete as per direction of the Engineer-in-Charge.I)In all sorts of soil excluding marshy soil & rocks (soft or hard) by manual means.
a)Depth up to 3 m. :
Bed (Raft Foundation) 1 7.700 8.240 1.170 74.23416
Shear key 2 8.240 0.540 0.730 6.496416
1
curtain wall type1 D/S 1 7.540 1.850 2.950 41.14955
curtain wall type2 U/S 1 7.540 1.500 2.000 22.62
Wing wall 4 5.200 0.450 0.750 7.02
Approach D/S 0 3.000 1.050 0.600 0
Approach U/S 0 6.000 1.050 0.600 0
Total 151.52
Rate Sand Filling in Foundation Trenches as per Drawing & Technical Specification
Analy
sis Bed 1 7.700 8.240 0.100 6.3448
2 Attach Wing wall 4 5.200 3.000 0.300 18.72
ed
Total 25.06
Providing and laying Design Mix concrete for plain concrete work in any part of bridge (excluding bottom plugging) with coarse aggregates of
Rate appropriate nominal size and grading, fine aggregate (sand) conforming to proper grading zone, both of approved quality and cement, as necessary,
Analy including labour, cost and carriage of all materials and including preparation of design mix, approval of the same by the Engineer-in-Charge and
3 sis cost for quality control, sampling, testing etc. all complete but excluding cost of labour and materials for formwork & reinforcement works.M-15
Attach Grade.Using concrete.
ed
M15
Bed (Raft Foundation) 1 7.700 8.240 0.150 9.5172
Shear key 2 8.240 0.980 0.150 2.42256
curtain wall type1 D/S 1 7.540 1.850 0.150 2.09235
curtain wall type2 U/S 1 7.540 1.500 0.150 1.6965
Wing wall 4 5.200 0.450 0.150 1.404
Approach D/S 0 3.000 1.050 0.150 0
Approach U/S 0 6.000 1.050 0.150 0
Total 17.13
Providing and laying Design Mix concrete for plain / reinforced concrete work in any part of bridge (excluding bottom plugging) with coarse
aggregates of appropriate nominal size and grading, fine aggregate (sand) conforming to proper grading zone, both of approved quality and
cement, as necessary, including labour, cost and carriage of all materials and including preparation of design mix, approval of the same by the
Engineer-in-Charge and cost for quality control, sampling, testing etc. all complete but excluding cost of labour and materials for formwork &
reinforcement works.M-25 Grade.Using concrete mixer.
M25
Bed (Raft) 1 7.500 8.040 0.720 43.416
shear wall 2 7.440 0.540 0.480 3.856896
Wall 2 7.500 0.720 3.000 32.4
Rate Slab 1 7.500 7.440 0.680 37.944
Analy Haunch 4 7.500 0.011 0.339
4 sis
Attach Curtain wall D/S Type 1 Step 1 1 7.500 1.650 0.550 6.80625
ed Step 2 1 7.500 0.750 0.750 4.21875
Step 3 1 7.500 0.750 0.450 2.53125
Step 4 1 7.500 0.450 0.200 0.675
Curtain wall D/S Type 1 Step 1 1 7.500 1.300 0.800 7.8
Step 2 1 7.500 0.450 0.750 2.53125
Step 3 1 7.500 0.200 0.450 0.675
Dirtwall 2 7.500 0.045 0.675
Dirtwall 2 7.500 0.300 0.300 1.35
Road Kerb 2 7.440 0.550 0.300 2.4552
Total 147.674
Rate Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical
Analy Specifications.
sis
5 Attach
22.15 1
ed
Tor Steel /H.Y.S.D. Bars 22.15
Rate Provision of an Reinforced cement concrete crash barrier at the edges of the road, approaches to bridge structures and
Analy medians, constructed with M-40 grade concrete with HYSD reinforcement conforming to IRC:21 and dowel bars 25 mm dia,
sis
Attach
450 mm long at expansion joints filled with pre-moulded asphalt filler board, keyed to the structure on which it is built and
ed installed as per design given in the enclosure to MOST circular No. RW/NH - 33022/1/94-DO III dated 24 June 1994 as per
6 dimensions in the approved drawing and at locations directed by the Engineer, all as specified
Name
Name of Work ;- Construction of Cement Concrete Pavement Road (Ch. 76.800 to 78.300) of Khairaghat to Jhulanipur &
of
Patlahawa Road of Indo-Nepal Bordar Road Project in District Mahrajganj.
work:-
Construction of dry lean cement concrete Sub- base over a prepared sub-
grade with coarse and fine aggregate conforming to IS: 383, the size of
coarse aggregate not exceeding 25 mm, aggregate cement ratio not to
exceed 15:1, aggregate gradation after blending to be as per table 600-1,
cement content not to be less than 150 kg/ cum, optimum moisture
content to be determined during trial length construction, concrete
7 strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, m3 969.750 8654.00 8392216.00
transported to site, laid with a paver with electronic sensor, compacting
with 8-10 tonnes vibratory roller, finishing and curing.
Providing and laying boulder pitching on slopes laid over prepared filter
9 media including boulder apron laid dry in front of toe of embankment Cum. 938.00 5532.00 5189016.00
complete as per drawing and Technical specifications.
Providing and laying filter material under piching in slopes complete as per
10 drawing and Technical specifications.
Cum. 294.00 5496.36 1615929.00
11 Box Culvert 3x6M RCC No. 2 4998990.00 9997980.00
12 Hume Pipe Culvert 1x1000mm No. 1 160119.49 160119.49
Edge line road marking with hot applied thermoplasticc compound with
13 reflecting glass beads on bituminous surface as per M.O.R.T. & H. m2 300 618.00 185400.00
Specification No. 803
Providing and erecting direction and place identification retro-
reflectorised sign as per IRC :67 made of high intensity grade
sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm
thick with area exceeding 0.9 sqm supported on a mild steel angle
iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by
14
means of properly designed foundation with M 15 grade cement
concrete45 cm x 45 cm x 60 cm, 60 cm below ground level as per
approved drawing
G.Total 160119.49
Rs. In Lac 1.60
Junior Engineer Assistant Engineer
C.D.-1, (Indo-Nepal Border) C.D.-1, (Indo-Nepal Border)
P.W.D.Maharajganj P.W.D.Maharajganj
DEATAILS OF MEASURMENT
PROPOSED ESTIMATE FOR CONSTRUCTION OF RCC BOX CELL BRIDGE CLEAR OPENING 6M X
3M ,CULVERT No 1
Sl. Page Description No. L. (m.) B. H.
No No & It No. (m.) (m.) Quantity
.
Excavation for Structures Earth work in excavation of foundation of structures as per drawing and
technical specification, including setting out, construction of shoring and bracing, removal of stumps and
other deleterious matter, dressing of sides and bottom and backfilling with approved material.
a)Depth up to 3 m. :
Bed (Raft Foundation) 1 7.700 8.240 1.170 74.23416
Rate Analy sis Shear key 2 8.240 0.540 0.730
1 Attached Sr No. 6.496416
15.01 curtain wall type1 D/S 1 7.540 1.850 2.950 41.14955
curtain wall type2 U/S 1 7.540 1.500 2.000 22.62
Wing wall 4 5.200 0.450 0.750 7.02
Approach D/S 0 3.000 1.050 0.600 0
Approach U/S 0 6.000 1.050 0.600 0
Total 151.52
Rate Analy sis Sand Filling in Foundation Trenches as per Drawing & Technical Specification
Attached Sr No.
15.03
2 Bed 1 7.700 8.240 0.100 6.3448
Wing wall 4 5.200 3.000 0.300 18.72
Total 25.06
Rate Analy sis Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical
Attached Sr No. Specifications. PCC Grade M15 Case II PCC Grade M15 using batching plant & manual placing
15.11
M15
Bed (Raft Foundation) 1 7.700 8.240 0.150 9.5172
Shear key 2 8.240 0.980 0.150 2.42256
3 curtain wall type1 D/S 1 7.540 1.850 0.150 2.09235
curtain wall type2 U/S 1 7.540 1.500 0.150 1.6965
Wing wall 4 5.200 0.450 0.150 1.404
Approach D/S 0 3.000 1.050 0.150 0
Approach U/S 0 6.000 1.050 0.150 0
Total 17.13
E RCC Grade M25 Case II RCC Grade M25 using batching plant transit mixer & manual placing
M25
Bed (Raft) 1 7.500 8.040 0.720 43.416
shear wall 2 7.440 0.540 0.480 3.856896
Wall 2 7.500 0.720 3.000 32.4
Slab 1 7.500 7.440 0.680 37.944
Haunch 4 7.500 0.011 0.339
Curtain wall D/S Type 1 Step 1 1 7.500 1.650 0.550 6.80625
Rate Analy sis
4 Attached Sr No.
Step 2 1 7.500 0.750 0.750 4.21875
15.11 E Step 3 1 7.500 0.750 0.450 2.53125
Step 4 1 7.500 0.450 0.200 0.675
Curtain wall D/S Type 1 Step 1 1 7.500 1.300 0.800 7.8
Step 2 1 7.500 0.450 0.750 2.53125
Step 3 1 7.500 0.200 0.450 0.675
Dirtwall 2 7.500 0.045 0.675
Dirtwall 2 7.500 0.300 0.300 1.35
Road Kerb 2 7.440 0.550 0.300 2.4552
Total 147.674
Rate Analy sis Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as
Attached Sr No. per Drawing and Technical Specifications.
15.13
5
22.15 1
Tor Steel /H.Y.S.D. Bars 22.15
Rate Analy sis Crash Barriers for Bridge Provision of an Reinforced cement concrete crash barrier at
Attached Sr No.
14.15
the bridge decks & approaches to bridge structures, constructed with Reinforced
Cement Concrete with HYSD reinforcement conforming MoRT&H Specification and
as per details given IRC -5 including dowel bars , expansion joints filled with pre-
6 moulded asphalt filler board etc.. and approved drawing and at locations directed by
the Engineer, all as specified.
Total No. Of Weep Holes = 2 X (7.5+5.20+5.20) @0.60 m C/c 35.8 / 0.6 59.67
Name of Work ;- Construction of Cement Concrete Pavement Road (Ch. 76.800 to 78.300) of Khairaghat to Jhulanipur & Patlahawa
Name of work:-
Road of Indo-Nepal Bordar Road Project in District Mahrajganj.
Providing and laying boulders apron on river bed for protection against
11 2503 scour with stone boulders weighing not less than 40 kg each complete Cum. 16.00 5532.00 88512.00
as per drawing and Technical specification.
Providing and laying Pitching on slopes laid over prepared filter media
12 2504 including boulder apron laid dry in front of toe of embankment Cum. 16.00 5641.90 90270.00
complete as per drawing and Technical specifications
Providing and laying Filter material underneath pitching in slopes
13 2504 Cum. 6.00 5873.00 35238.00
complete as per drawing and Technical specification
4998990.00
G.Total 4998990.00
In Lac 49.99
Name of Work ;- Construction of Cement Concrete Pavement Road (Ch. 76.800 to 78.300) of
Khairaghat to Jhulanipur & Patlahawa Road of Indo-Nepal Bordar Road Project in District
Mahrajganj.
S. Amount
Item of Work Rs.
No. ( In Rs.)
Part-1 (Road Work)
(a) Cost of Road Rs. 56263687.00
Part-2 (Construction of Culvert)
(b) Construction of Culvert Rs. 4998990.00
Part-3 (Cross Drainage Hume Pipe Work)
(c) Cost of Hume Pipe Rs. 160119.49
(A) Total (a to c) Rs. 61422796.49
(i) Quality Control @ 1% on (A) Rs. 614227.96
(ii) Survey+DPR Prepration @ 0.5% on (A) Rs. 307113.98
(iii) Labour Cess @ 1% on (A) Rs. 614227.96
(iv) GST @ 18% (Factor 0.2127 on (A)) Rs. 13064628.81
(v) EPF & ESI Charges 0.7875% on (A) Rs. 483704.52
(vi) Ajency Charges@7.0% on (A) Rs. 4299595.75
(B) Sub Total (i to vi ) Rs. 19383499.00
C=(A+B) Sub Total Rs. 80806295.49
(vii) Contingency Cost @ 3% on (C) (D) Rs. 2424188.86
(C) Materials
M-001 Stone Boulder of size 150 mm and below at Cruser Plant cum
Including
M-002 Supply of quarried stone 150 - 200 mm size for Hand Broken at site cum Carriage - ( L7) -
1 Km.
Including
M-003 Boulder with minimum size of 300 mm for Pitching at Site cum Carriage - ( L7) -
1 Km.
Including
M-004 Coarse sand at Mixing Plant cum 3460.39 Carriage - ( L6) -
1 Km.
Including
M-005 Coarse sand at Site cum 3460.39 Carriage - ( L5) -
1 Km.
Including
M-006 Fine sand at Site cum 900.00 Carriage - ( L5) -
1 Km.
Including
M-007 Moorum at Site cum Carriage - ( L3) -
1 Km.
Including
M-008 Gravel/Quarry spall at Site Cum Carriage - ( L7) -
1 Km.
Including
M-009 Granular Material or hard murrum for GSB works at Site Cum Carriage - ( L3) -
1 Km.
Including
Fly ash conforming to IS: 3812 ( Part II & I) atHMP Plant / Batching Plant /
M-010 Cum Carriage - ( L4) -
Crushing Plant
1 Km.
Including
M-011 Filter media/Filter Material as per Table 300-3 (MoRT&H Specification) at Site Cum Carriage - ( L7) -
1 Km.
Rate at Plant
Description Unit Rate at Site
(HMP/Batching)
M-012 Close graded Granular sub-base Material 53 mm to 9.5 mm cum 462.15 462.15
M-013 Close graded Granular sub-base Material 37.5 mm to 9.5 mm cum 462.15 462.15
M-014 Close graded Granular sub-base Material 26.5 mm to 9.5 mm cum 463.37 463.37
M-015 Close graded Granular sub-base Material 9.5 mm to 4.75 mm cum 435.11 435.11
M-016 Close graded Granular sub-base Material 9.5 mm to 2.36 mm cum 308.47 308.47
M-017 Close graded Granular sub-base Material 4.75mm to 2.36 mm cum 181.83 181.83
Close graded Granular sub-base Material 4.75mm to 75 micron
M-018 cum 181.83 181.83
mm
M-019 Close graded Granular sub-base Material 2.36 mm cum 181.83 181.83
Stone crusher dust finer than 3mm with not more than 10%
M-020 cum 181.83 181.83
passing 0.075 sieve.
M-021 Coarse graded Granular sub-base Material 2.36 mm & below cum 181.83 181.83
Coarse graded Granular sub-base Material 4.75mm to 75 micron
M-022 cum 181.83 181.83
mm
M-023 Granular sub-base Material 4.75 mm to 2.36 mm cum 181.83 181.83
M-024 Granular sub-base Material 9.5 mm to 4.75 mm cum 435.11 435.11
M-025 Coarse graded Granular sub-base Material 26.5 mm to 4.75 mm cum 463.37 463.37
M-026 Granular sub-base Material 26.5 mm to 9.5 mm cum 463.37 463.37
M-027 Coarse graded Granular sub-base Material 37.5 mm to 9.5 mm cum 462.15 462.15
M-028 Granular sub-base Material 53 mm to 26 .5mm cum 462.15 462.15
M-029 Aggregates below 5.6 mm cum 181.83 181.83
M-030 Aggregates 22.4 mm to 2.36 mm cum 369.53 369.53
M-031 Aggregates 22.4 mm to 5.6 mm cum 369.53 369.53
M-032 Aggregates 45 mm to 2.8 mm cum 392.07 392.07
M-033 Aggregates 45 mm to 22.4 mm cum 392.07 392.07
M-034 Aggregates 53 mm to 2.8 mm cum 392.07 392.07
M-035 Aggregates 53 mm to 22.4 mm cum 475.66 475.66
M-036 Aggregates 63 mm to 2.8 mm cum 392.07 392.07
M-037 Aggregates 63 mm to 45 mm cum 459.69 459.69
M-038 Aggregates 90 mm to 45 mm cum 459.69 459.69
M-039 Aggregates 10 mm to 5 mm cum 308.47 308.47
M-040 Aggregates 11.2 mm to 0.09 mm cum 308.47 308.47
M-041 Aggregates 13.2 mm to 0.09 mm cum 308.47 308.47
M-042 Aggregates 13.2 mm to 5.6 mm cum 435.11 435.11
M-043 Aggregates 13.2 mm to 10 mm cum 435.11 435.11
M-044 Aggregates 20 mm to 10 mm cum 463.37 463.37
M-045 Aggregates 25 mm to 10 mm cum 463.37 463.37
M-046 Aggregates 19 mm to 6 mm cum 463.37 463.37
M-047 Aggregates 37.5 mm to 19 mm cum 475.66 475.66
M-048 Aggregates 37.5 mm to 25 mm cum 475.66 475.66
M-049 Aggregates 6 mm nominal size cum 435.11 435.11
M-050 Aggregates 10 mm nominal size cum 3735.39 3735.39
M-051 Aggregates 13.2/12.5 mm nominal size cum
M-052 Aggregates 20 mm nominal size cum 4325.39 4325.39
M-053 Aggregates 25 mm nominal size cum 491.63 491.63
M-054 Aggregates 40 mm nominal size cum 4325.39 4325.39
M-055 Crushing of stone aggregates (GSB Crusher Run) cum 586.59 586.59
Sl. No. Description Unit Rate at Site
M-056 AC pipe 100 mm dia metre 750.00
M-057 Acrylic polymer bonding coat litre
M-058 Alluminium Paint litre
M-059 Aluminium alloy plate 2mm Thick sqm
M-060 Aluminium alloy/galvanised steel tonne
Aluminium sheeting fixed with encapsulated lens type reflective sheeting
M-061 including 2% towards lettering, cost of angle iron, cost of drilling holes, nuts, sqm
bolts etc.and signs as applicable
M-062 Aluminium studs 100 x 100 mm fitted with lense reflectors nos
M-063 Barbed wire kg
M-064 Bearing (Cost of parts) nos
M-065 Bearing (Cast steel rocker bearing assembly of 250 tonne ) nos
Bearing (Elastomeric bearing assembly consisting of 7 internal layers of
M-066 elastomer bonded to 6 nos. internal reinforcing steel laminates by the process nos 7315.53
of vulcanisation,)
M-067 Bearing (Forged steel roller bearing of 250 tonne nos
Bearing (Pot type bearing assembly consisting of a metal piston supported by a
disc, PTFE pads providing sliding surfaces against stainless steel mating
M-068 nos
together with cast steel assemblies/fabricated structural steel assemblies duly
painted with all components
M-069 Bearing (PTFE sliding plate bearing assembly of 80 tonnes ) nos
M-070 Bearing (Supply of sliding plate bearing of 80 tonne) nos
M-071 Bentonite kg
M-072 Binding wire kg 90.00
Including
M-073 Bitumen ( Cationic Emulsion ) tonne Carriage - ( L9) -
1 Km.
Including
M-074 Bitumen (60-70 grade) tonne Carriage - ( L9) -
1 Km.
Including
M-075 Bitumen (80-100 grade ) tonne Carriage - ( L9) -
1 Km.
Including
M-076 Bitumen (Cutback ) tonne Carriage - ( L9) -
1 Km.
Including
M-077 Bitumen (emulsion) tonne Carriage - ( L9) -
1 Km.
Including
M-078 Bitumen (modified graded) tonne Carriage - ( L9) -
1 Km.
M-079 Brick each
M-080 C.I.shoes for the pile kg
M-081 Cement tonne 6200.00
M-082 CGI Sheet (0.8 mm thick) kg
M-083 Cold twisted bars (HYSD Bars) tonne 75943.00
M-084 Coller for joints 300 mm dia nos
M-085 Compressible Fibre Board(20mm thick) sqm
M-086 Connectors/ Staples each
M-087 Copper Plate(12m long x 250mmwide) kg
M-088 Corrosion resistant Structural steel tonne 79740.15
M-089 Corrugated sheet, 3 mm thick, "Thrie" beam section railing kg
M-090 Credit for excavated rock found suitable for use cum
M-091 Curing compound liter
M-092 Delineators from ISI certified firm as per the standard drawing given in IRC - 79 each
M-093 Earth Cost slab
Elastomeric or compensation forjoint
seal expansion earth taken from
assembly private landby using
manufactured cum 120.00
M-094 chloroprene, elastomer for elastomeric slab unit conforming to clause 915.1 of metre
M-095 IRC:
Epoxy83compound
(part II), with accessories for preparing epoxy mortar kg
M-096 Epoxy mortar kg
M-097 Epoxy primer kg
M-098 Epoxy resin-hardner mix for prime coat kg
M-099 Flag of red color cloth 600 x 600 mm each
M-100 Flowering Plants each
M-101 Galvanised MS flat clamp nos 200.00
Galvanised steel wire crates of mesh size 100 mm x 100 mm woven with 4mm
M-102 sqm
dia. GI wire in rolls of required size.
M-103 Galvanised structural steel plate 200 mm wide, 6 mm thick, 24 m long kg
M-104 Geo grids sqm
M-105 Geomembrane sqm
M-106 Geonets sqm
M-107 Geotextile sqm
M-108 Geotextile filter fabric sqm
M-109 GI bolt 10 mm Dia nos 20.00
M-110 Grouting pump with agitator hour 95.00
M-111 Grass (Doob) kg
M-112 Grass (Fine) kg
M-113 HDPE pipes 75mm dia metre
M-114 HDPE pipes 90mm dia metre
M-115 Hedge plants each
M-116 Helical pipes 600mm diameter metre
M-117 Hot applied thermoplastic compound litre
Including
M-118 HTS strand tonne 75056.25 Carriage - ( L10)
- 1 Km.
M-119 Joint Sealant Compound kg
M-120 Jute netting, open weave, 2.5 cm square opening for seeding and Mulching sqm
M-121 LDO for steam curing litre
M-122 M.S. Clamps nos
M-123 M.S. Clamps kg
M-124 M.S.shoes @ 35 Kg per pile of 15 m kg
M-125 Mild Steel bars tonne
Modular strip/box seal expansion joint including anchorage catering to a
horizontal movement beyond 70 mm and upto 140mm assembly comprising of
M-126 edge beams, central beam,2 modules chloroprene seal, anchorage elements, metre
support and
Modular controlseal
strip/box system, all steel
expansion sections
joint protected
catering againstmovement
to a horizontal corrosion and
installed by the manufacturer
beyond 140mm or hisbox/box
and upto 210mm authorised
seal representative
joint assembly containing 3
modules/cells and comprising of edge beams, two central beams, chloroprene
M-127 metre
seal, anchorage elements, support and control system, all steel sections
protected against corrosion and installed by the manufacturer or his authorised
M-128 representative
Nipples 12mm nos
M-129 Nuts and bolts kg 80.00
M-130 Paint litre 250.00
M-131 Pavement Marking Paint litre
M-132 Paving Fabric sqm
M-133 Perforated geosynthetic pipe 150 mm dia metre
M-134 Perforated pipe of cement concrete, internal dia 100 mm metre
M-135 Pesticide kg
M-136 Pipes 200 mm dia, 2.5 m long for drainage metre
M-137 Plastic sheath, 1.25 mm thick for dowel bars sqm
M-138 Plastic tubes 50 cm dia, 1.2 m high nos
M-139 Polymer braids metre
M-140 Pre moulded Joint filler,25 mm thick for expansion joint. sqm
M-141 Pre-coated stone chips of 13.2 mm nominal size cum
Preformed continuous chloroprene elastomer or closed cell foam sealing
M-142 element with high tear strength, vulcanised in a single operation for the full metre
length of a joint to ensure water tightness.
M-143 Pre-moulded asphalt filler board sqm 100.00
M-144 Pre-packed cement based polymer concrete of strength 45 Mpa at 28 days kg
M-145 Primer kg
M-146 Quick setting compound kg
M-147 Random Rubble Stone cum
M-148 RCC Pipe NP 4 heavy duty non presure pipe 1000 mm dia metre
M-149 RCC Pipe NP 4 heavy duty non presure pipe 1200 mm dia metre
M-150 RCC Pipe NP 4 heavy duty non presure pipe 900 mm dia metre
M-151 RCC Pipe NP 4 heavy duty non presure pipe 600 mm dia metre
M-152 RCC Pipe NP 4 heavy duty non presure pipe 300 mm dia metre
M-153 Reflectorising glass beads kg
Reinforcement strips 60 mm wide 5 mm thick as per clause 3102. (Copper
M-154 metre
Strips)
Reinforcement strips 60 mm wide 5 mm thick as per clause 3102. (Galvanised
M-155 metre
carbon steel strips)
Reinforcement strips 60 mm wide 5 mm thick as per clause 3102. (Glass
M-156 metre
reinforced polymer/fibre reinforced polymer/polymeric strips)
Reinforcement strips 60 mm wide 5 mm thick as per clause 3102. (Stainless
M-157 metre
steel strips)
Reinforcement strips 60 mm wide 5 mm thick as per clause 3102. Aluminium
M-158 metre
strips)
M-159 Rivets each
M-160 Sand bags (Cost of sand and Empty cement bag) nos 5.00
M-161 Sapling 2 m high 25 mm dia each
M-162 Scrap tyres of size 900 x 20 nos
M-163 Seeds kg
M-164 Selected earth cum
M-165 Separation Membrane of impermeable plastic sheeting 125 micron thick sqm
M-166 Sheathing duct metre 94.00
M-167 Shrubs each
M-168 Sludge / Farm yard manure @ 0.18 cum per 100 sqm at site of work for turfing cum
M-169 Sodium vapour lamp each
M-170 Square Rubble Coursed Stone cum
Steel circular hollow pole of standard specification for street lighting to mount
M-171 each
light at 5 m height above deck level
Steel circular hollow pole of standard specification for street lighting to mount
M-172 each
light at 9 m height above road level
M-173 Steel drum 300 mm dia 1.2 m high/empty bitumen drum nos
M-174 Steel helmet and cushion block on top of pile head during driving. kg
M-175 Steel pipe 25 mm external dia as per IS:1239 metre
M-176 Steel pipe 50 mm external dia as per IS:1239 metre
M-177 Steel pipe 100 mm external dia as per IS:1239 metre
M-178 Steel wire rope 20 mm kg
M-179 Steel wire rope 40 mm kg
M-180 Strip seal expansion join metre 2923.00
M-181 Structural Steel tonne 79740.15
M-182 Super plastisizer admixture IS marked as per 9103-1999 kg 100.00
Synthetic Geogrids as per clause 3102.8 and approved design and
M-183 sqm
specifications.
M-184 Through and bond stone each
M-185 Tie rods 20mm diameter nos
M-186 Tiles size 300 x 300 mm and 25 mm thick each
M-187 Timber cum
M-188 Traffic cones with 150 mm reflective sleeve nos
M-189 Tube anchorage set complete with bearing plate, permanent wedges etc nos 1395.00
M-190 Unstaked lime tonne
M-191 Water KL 50.00
M-192 Water based cement paint litre 250.00
M-193 Welded steel wire fabric kg
M-194 Wire mesh 50mm x 50mm size of 3mm wire kg
M-195 Wooden ballies 2" Dia for bracing each 100.00
M-196 Wooden ballies 8" Dia and 9 m long each 1100.00
M-197 Wooden packing cum
M-198 Wooden staff for fastening of flag 25 mm dia, one m long each
M-199 Silica Fume Kg
M-200 Synthetic Geogrid Ultimate tensile strength- 100 kN/m sqm
M-201 Synthetic Geogrid Ultimate tensile strength- 150 kN/m sqm
M-202 Synthetic Geogrid Ultimate tensile strength- 200 kN/m sqm
M-203 Synthetic Geogrid Ultimate tensile strength- 250 kN/m sqm
M-204 Synthetic Geogrid Ultimate tensile strength- 300 kN/m sqm
M-205 Synthetic Geogrid Ultimate tensile strength- 350 kN/m sqm
M-206 Synthetic Geogrid Ultimate tensile strength- 400 kN/m sqm
M-207 Synthetic Geogrid Ultimate tensile strength- 500 kN/m sqm
M-208 Synthetic Geogrid Ultimate tensile strength- 600 kN/m sqm
M-209 Synthetic Geogrid Ultimate tensile strength- 700 kN/m sqm
M-210 Synthetic Geogrid Ultimate tensile strength- 800 kN/m sqm
M-211 Synthetic Geogrid Ultimate tensile strength- 900 kN/m sqm
M-212 Synthetic Geogrid Ultimate tensile strength- 1000 kN/m sqm
M-213 Synthetic Geogrid Ultimate tensile strength- 1100 kN/m sqm
M-214 Synthetic Geogrid Ultimate tensile strength- 1200 kN/m sqm
M-215 Explosives for blasting Kg
M-216 Delay Detonators for Nos.
M-217 Electric Detonators Nos.
M-218 Detonation fuse coil Meter
M-219 3.7 m long extension rod boom Hydraulic Drill Jumbo Nos
M-220 32 mm coupling sleeve boom Hydraulic Drill Jumbo Nos
M-221 Difter rod boom Hydraulic Drill Jumbo Nos
M-222 R32 shank adapter boom Hydraulic Drill Jumbo Nos
M-223 45 mm dia Button Bit boom Hydraulic Drill Jumbo Nos
M-224 51 mm dia button bit boom Hydraulic Drill Jumbo Nos
M-225 Steel Fiber tonne
M-226 Microsilica Kg
M-227 Accelerator Kg
M-228 Wiremesh Kg
M-229 Bamboos Meter
M-230 Live Stake Stump Meter
M-231 Hard wood sticks Nos.
M-232 Live Sods (0.6m Length) Nos.
M-233 Live Sods ( 2m Length) tonne
M-234 Coal Tar Epoxy Kg.
M-235 Binding Material Meter
M-236 Spring post 700 mm each
M-237 Spring post 450 mm each
Water Filled Barricades Work zone sheeting (Trapezoidal Shape 800 mm to
M-238 each
1000 mm in length, 700 mm in height)
M-239 GI Pipe 100 mm Dia Meter
M-240 Bracket for GI pipe fixing Kg
M-241 Flange for GI pipe fixing Kg
M-242 Neem Cake Quintal
M-243 Supplying Sludge cum
M-244 Control Centre Server Nos.
M-245 Hot Standby Backup Server Nos.
M-246 NAS Video Server with storage Minimum 70 TB Nos.
M-247 Backup Video (Only Incidents) Server Nos.
M-248 Graphic Display (70" LED DLP in 3x2 matrix) Set
M-249 Graphic Display Controller and software including Video Switches Set
M-250 CCTV Monitoring Workstation Nos.
M-251 Emergency Telephone (1033) console Nos.
M-252 VIDS- Workstation Nos.
M-253 Administrative Workstation Nos.
M-254 ATMS Operator Workstation Nos.
M-255 CCTV Joystick Nos.
M-256 Operations Laser Printer (Colour) Nos.
M-257 Operations Laser Printer (Black) Nos.
M-258 Rack 19" Nos.
M-259 ATMS Control Room Software (integrated with VIDS, ATCC, VMS, MOS) LS
M-260 Video Management Software with atleast 150 VMS Lic. LS
M-261 Facility Monitoring System Controller Software LS
M-262 Server & Database license LS
M-263 Antivirus license LS
M-264 PTZ Camera (including CCTV Controller) Set
M-265 Solar System with UPS, battery & 12m Pole & Cabinet Set
M-266 VIDS Camera (including Image Processing unit) Set
M-267 Warning amber lights with hooters, 72 Hrs solar backup, 5m poles and foundatio Set
M-268 Cabinet Nos.
M-269 12 m Pole (including manufacturing and galvanizing) Nos.
M-270 Solar System with UPS & batteries Set
M-271 Equipment, Sensor unit, Processing unit, Solar power supply and civil works for Set
M-272 Solar System with UPS, batteries Set
M-273 VMS (Variable Message Sign - M type) Nos.
M-274 Gantry (including manufacturing and galvanizing) Nos.
M-275 Solar System with UPS, battery and cabinet for M type VMS Set
M-276 Uninterruptible Power Supply (UPS) For Server Rack (10 KVA) Set
M-277 Uninterruptible Power Supply (UPS) For TMC (30 KVA) Set
M-278 Power Distribution Board (Essential & Critical Supply) Set
M-279 MOS sensor Equipment (including MOS Controller) Set
M-280 Cabinet Nos.
M-281 Pole Nos.
M-282 Steel fence for protection Set
M-283 24 Core Armoured OFC + all accessories Meter
M-284 40 mm PLB HDPE duct as per latest TSEC specifications + all accessories Meter
M-285 Trenching of 1.8 meters, Laying & Backfilling for PLB HDPE duct Meter
M-286 Bi-Axial Extruded GeoGrids of Minimum Tensile Strength 15 kN/m sqm
M-287 Bi-Axial Extruded GeoGrids of Minimum Tensile Strength 20 kN/m sqm
M-288 Bi-Axial Extruded GeoGrids of Minimum Tensile Strength 30 kN/m sqm
M-289 Bi-Axial Extruded GeoGrids of Minimum Tensile Strength 40 kN/m sqm
M-290 Geosynthetic Drainage Composite ( tensile strength of 18 kN/m) sqm
M-291 Geosynthetic Drainage Composite (tensile strength of 13.5 kN/ m) sqm
Unit = Hectare
Taking output = 1 Hectare
(i) By Manual Means:-
A In area of light jungle
a) Labour
Mate day 6.000 370.000 2220.000 L-12
Mazdoor day 150.000 330.000 49500.000 L-13
b) Machinery
Tractor-trolley hour 122.222 873.00 106700.000 P&M-12001
c) Overhead charges @ 12% on (a+b) 19010.400
d) Contractor's profit @ 10% on (a+b+c) 17743.040
Rate per Hectare = a+b+c+d 195173.440
Say, 195173.40
IN 1 m 20
3.18 305 Construction of Subgrade and Earthen Shoulders (For Carted
Earth)
Construction of sub-grade and earthen shoulders with approved
material obtained from borrow pits with all lifts & leads,
transporting to site, spreading, grading to required slope and
compacted to meet requirement of table No. 300-2
Unit = cum
Taking output = 450 cum
a) Labour
Mate day 0.080 370.000 29.600
Mazdoor day 2.000 330.000 660.000
b) Machinery
Hydraulic Excavator
(i) 1.2 cum bucket capacity hour 3293.000
(ii) 1.1 cum bucket capacity hour 2965.000
(iii) 0.9 cum bucket capacity hour 8.127 2689.000 21853.460
Tipper
For Transportation
(i) 18 cum capacity t.km 7.151
(ii) 14 cum capacity t.km 8.120
(iii) 10 cum capacity t.km 450x1.75 x L2 10.030 15797.250
For Loading & unloading time
(i) 18 cum capacity hour 2746.000
(ii) 14 cum capacity hour 2435.000
(iii) 10 cum capacity hour 8.127 2166.000 17603.048
Motor grader for grading
(i) Motor grader 4.30 metre blade hour 5907.000
(ii) Motor grader 3.70 metre blade hour 5419.000
(iii) Motor grader 3.35 metre blade hour 2.929 4747.000 13902.091
Water tanker ( speed @ 20km/hr and return speed @ 30
km/hr and spreading speed @ 2.5 km/hr )
(i) 16 KL capacity hour 1440.000
(ii) 12 KL capacity hour 1270.000
(iii) 6 KL capacity hour 2.554 967.000 2469.718
Vibratory roller 12 tonne hour 2.184 2440.000 5330.097
c) Material
Cost of water (considering 5% additional moisture required) KL 39.375 50.000 1968.750
Compensation for earth taken from private land cum 450.000 0.000 0.000
d) Overhead charges @ 0.12 on 9553.682
(a+b+c)
e) Contractor's profit @ 10% on 8916.770
(a+b+c+d)
Cost for 450 cum = a+b+c+d+e 98084.465
Rate per cum = (a+b+c+d+e)/450 217.965
Say, 218.00
CHAPTER-3
EARTH WORK, EROSION CONTROL AND DRAINAGE
Amount
Quantity
Reference to (Rs.)
Rate
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
3.3 301 Excavation in Soil with Dozer with lead upto 1000 metres
Excavation for road way in soil by mechanical means including
cutting and transporting the earth to site of
embankment/dumping area with lead upto 1000 metres,
including trimming bottom and side slopes in accordance with
requirements of lines, grades and cross sections.
Unit = cum
Taking output = 500 Tonne
a) Labour
Mate day 0.040 370.000 14.800 L-12
Mazdoor day 1.000 300.000 300.000 L-13
b) Machinery
Dozer
Dozer (240HP) hour 6273.00 P&M-1001
Dozer (175 HP) hour 4845.00 P&M-1002
Dozer (90 HP) hour 8.621 3336.00 28758.621 P&M-1003
Tipper
(i) 18 cum capacity t.km 7.151 P&M-72002
(ii) 14 cum capacity t.km 8.120 P&M-73002
(iii) 10 cum capacity t.km 800.000 10.030 8024.000 P&M-74002
Loading & unloading charges
(i) Using by 18 cum capacity Tipper & 3.1 Cum capacity cum 88.41 P&M-77001
Loader
(ii) Using by 14 cum capacity Tipper & 2.1 Cum capacity cum 88.57 P&M-77002
Loader
(iii) Using by 10 cum capacity Tipper & 1 Cum capacity cum 500.000 123.36 61680.00 P&M-77003
Loader
A Unit = cum
Taking output = 50 Tonne
a) Labour
Mate day 0.040 370.000 14.800 L-12
Mazdoor day 1.000 300.000 300.000 L-13
b) Machinery
Hydraulic Excavator for Jack Hammer
(i) 1.2 cum bucket capacity hour 3293.000 P&M-3003
(ii) 1.1 cum bucket capacity hour 2965.000 P&M-3004
(iii) 0.9 cum bucket capacity hour 11.378 2689.000 30594.844 P&M-3005
Jack Hammer hour 11.378 206.000 2343.822 P&M-4001
Tipper
For transportation considering lead @ 1km
(i) 18 cum capacity t.km 7.151 P&M-72002
(ii) 14 cum capacity t.km 8.120 P&M-73002
(iii) 10 cum capacity t.km 100.000 10.030 1003.000 P&M-74002
For loading & unloading charges for disposed of grabbed
material
(i) Using by 18 cum capacity Tipper & 3.1 Cum capacity cum 88.41 P&M-77001
Loader
(ii) Using by 14 cum capacity Tipper & 2.1 Cum capacity cum 88.57 P&M-77002
Loader
(iii) Using by 10 cum capacity Tipper & 1 Cum capacity cum 60.000 123.36 7401.60 P&M-77003
Loader
Credit for excavated rock found suitable for use @ 50 per cum 25.000 350.00 (8750.000) M-090
cent of excavated quantity
c) Overhead charges @ 0.12 on 3948.968
(a+b)
d) Contractor's profit @ 10% on 3685.703
(a+b+c)
Cost for 50 cum = a+b+c+d 40542.738
Rate per cum = (a+b+c+d)/50 810.855
Say, 810.90
3.8 B Manual Method
Unit = cum
Taking output = 16
a) Labour
Mate day 1.640 370.000 606.800 L-12
Mazdoor including loading in truck day 16.000 300.000 4800.000 L-13
Chiseller day 24.000 592.00 14208.000 L-05
Blacksmith (IInd class) day 1.000 425.00 425.000 L-01
b) Machinery
Tipper 5.5 cum capacity, 1 trip per hour. hour 2.900 1649.000 4782.100 P&M-6004
Credit for excavated rock found suitable for use @ 50 per cum 8.000 350.00 (2800.000) M-090
cent of excavated
c) Overhead charges @ 0.12 on 2642.628
(a+b)
d) Contractor's profit @ 10% on 2466.453
(a+b+c)
Cost for 16 cum = a+b+c+d 27130.981
Rate per cum = (a+b+c+d)/16 1695.686
Say, 1695.70
Note 1. Credit is considered for 50 per cent of quantity of work.
2. Loading for disposal will be done manually, being small
quantity.
3. In case some rock is issued to contractor at site, the item of
carriage shall be omitted to the extent of quantity issued to the
contractor.
Unit = cum
Taking output = 415 Tonne
a) Labour
Mate day 0.040 370.000 14.800 L-12
Mazdoor day 1.000 300.000 300.000 L-13
b) Machinery
Hydraulic Excavator
(i) 1.2 cum bucket capacity hour 3293.000 P&M-3003
(ii) 1.1 cum bucket capacity hour 2965.000 P&M-3004
(iii) 0.9 cum bucket capacity hour 7.678 2689.000 20645.302 P&M-3005
Tipper
For transportation to dumping yard considering lead @ 1km
Unit = cum
Taking output = 120
a) Labour
Mate day 0.210 370.000 77.700 L-12
Mazdoor day 3.000 300.000 900.000 L-13
Driller day 2.000 325.00 650.000 L-06
Blaster day 0.250 560.00 140.000 L-03
b) Machinery
Air Compressor 250 cfm hour 17.000 607.00 10319.000 P&M-15001 + P&M-
45001 x 2
Pneumatic breaker for drilling holes (@ 4.5 m per hour) hour 34.000 11.00 374.000 P&M-45001
Hydraulic Excavator for Jack Hammer & backfilling , loading
Tipper
For transportation to dumping yard considering lead @ 1km
Compensation for earth taken from private land and cartage cum 450.000 144.91 65209.091 M-093
upto 3 km
d) Overhead charges @ 0.12 on 13350.487
(a+b+c)
e) Contractor's profit @ 10% on 12460.454
(a+b+c+d)
Cost for 450 cum = a+b+c+d+e 137064.998
Compensation for earth taken from private land cum 450.000 0.000 0.000 M-093
d) Overhead charges @ 0.12 on 9566.816
(a+b+c)
e) Contractor's profit @ 10% on 8929.028
(a+b+c+d)
Cost for 450 cum = a+b+c+d+e 98219.307
Rate per cum = (a+b+c+d+e)/450 218.265
Say, 218.30
3.17 305 Construction of Embankment with Material Deposited from
Roadway Cutting
Construction of embankment with approved materials deposited
at site from roadway cutting and excavation from drain and
foundation of other structures graded and compacted to meet
requirement of table 300-2.
Unit = cum
Taking output = 450 cum
a) Labour
Mate day 0.040 370.000 14.800 L-12
Mazdoor day 1.000 330.000 330.000 L-13
b) Machinery
Motor grader for grading
(i) Motor grader 4.30 metre blade hour 5907.000 P&M-2001
(ii) Motor grader 3.70 metre blade hour 5419.000 P&M-2002
(iii) Motor grader 3.35 metre blade hour 2.929 4747.000 13902.091 P&M-2003
Water tanker ( speed @ 20km/hr and return speed @ 30
km/hr and spreading speed @ 2.5 km/hr )
(i) 16 KL capacity hour 1440.000 P&M-11001
(ii) 12 KL capacity hour 1270.000 P&M-11002
(iii) 6 KL capacity hour 2.554 967.000 2469.718 P&M-11003
Vibratory roller hour 2.184 2440.000 5330.097 P&M-7001
c) Material
Cost of water (considering 5% additional moisture required) KL 36.000 50.000 1800.000 M-191
Unit = cum
Taking output = 450 cum
a) Labour
Mate day 0.080 370.000 29.600 L-12
Mazdoor day 2.000 300.000 600.000 L-13
b) Machinery
Hydraulic Excavator
(i) 1.2 cum bucket capacity hour 3293.000 P&M-3003
(ii) 1.1 cum bucket capacity hour 2965.000 P&M-3004
(iii) 0.9 cum bucket capacity hour 8.127 2689.000 21853.460 P&M-3005
Motor grader for grading
(i) Motor grader 4.30 metre blade hour 5907.000 P&M-2001
(ii) Motor grader 3.70 metre blade hour 5419.000 P&M-2002
(iii) Motor grader 3.35 metre blade hour 2.929 4747.000 13902.091 P&M-2003
Water tanker ( speed @ 20km/hr and return speed @ 30
km/hr and spreading speed @ 2.5 km/hr )
(i) 16 KL capacity hour 1440.000 P&M-11001
(ii) 12 KL capacity hour 1270.000 P&M-11002
(iii) 6 KL capacity L=3 Km. hour 4.707 967.000 4551.669 P&M-11003
Vibratory roller 12 tonne hour 2.184 2440.000 5330.097 P&M-7001
c) Material
Cost of water (considering 5% additional moisture required) KL 39.375 50.000 1968.750 M-191
Compensation for earth taken from private land cum 450.000 0.000 0.000 M-093
d) Overhead charges @ 0.12 on 5788.280
(a+b+c)
e) Contractor's profit @ 10% on 5402.395
(a+b+c+d)
Cost for 450 cum = a+b+c+d+e 59426.342
Rate per cum = (a+b+c+d+e)/450 132.059
Say, 132.10
3.18 305 Construction of Subgrade and Earthen Shoulders (For Carted
Earth)
Construction of sub-grade and earthen shoulders with approved
material obtained from borrow pits with all lifts & leads,
transporting to site, spreading, grading to required slope and
compacted to meet requirement of table No. 300-2
Unit = cum
Taking output = 450 cum
a) Labour
Mate day 0.080 370.000 29.600 L-12
Mazdoor day 2.000 300.000 600.000 L-13
b) Machinery
Hydraulic Excavator
(i) 1.2 cum bucket capacity hour 3293.000 P&M-3003
(ii) 1.1 cum bucket capacity hour 2965.000 P&M-3004
(iii) 0.9 cum bucket capacity hour 8.127 2689.000 21853.460 P&M-3005
Tipper
For Transportation
(i) 18 cum capacity t.km 7.151 P&M-72002
(ii) 14 cum capacity t.km 8.120 P&M-73002
(iii) 10 cum capacity t.km 450x1.75 x L2 10.030 15797.250 P&M-74002
For Loading & unloading time
(i) 18 cum capacity hour 2746.000 P&M-6001
(ii) 14 cum capacity hour 2435.000 P&M-6002
(iii) 10 cum capacity hour 8.127 2166.000 17603.048 P&M-6003
Motor grader for grading
(i) Motor grader 4.30 metre blade hour 5907.000 P&M-2001
(ii) Motor grader 3.70 metre blade hour 5419.000 P&M-2002
(iii) Motor grader 3.35 metre blade hour 2.929 4747.000 13902.091 P&M-2003
Water tanker ( speed @ 20km/hr and return speed @ 30
km/hr and spreading speed @ 2.5 km/hr )
(i) 16 KL capacity hour 1440.000 P&M-11001
(ii) 12 KL capacity hour 1270.000 P&M-11002
(iii) 6 KL capacity hour 4.708 967.000 4552.153 P&M-11003
Vibratory roller 12 tonne hour 2.184 2440.000 5330.097 P&M-7001
c) Material
Cost of water (considering 5% additional moisture required) KL 39.375 50.000 1968.750 M-191
Compensation for earth taken from private land cum 450.000 0.000 0.000 M-093
d) Overhead charges @ 0.12 on 9796.374
(a+b+c)
e) Contractor's profit @ 10% on 9143.282
(a+b+c+d)
Cost for 450 cum = a+b+c+d+e 100576.104
Rate per cum = (a+b+c+d+e)/450 223.502
Say, 223.50
3.19 305 Construction of Subgrade and Earthen Shoulders with Material
Deposited from Roadway Cutting
Construction of embankment with approved materials deposited
at site from roadway cutting and excavation from drain and
foundation of other structures graded and compacted to meet
requirement of table 300-2.
Unit = cum
Taking output = 450
a) Labour
Mate day 0.040 370.000 14.800 L-12
Mazdoor day 1.000 300.000 300.000 L-13
b) Machinery
Motor grader for grading
(i) Motor grader 4.30 metre blade hour 5907.000 P&M-2001
(ii) Motor grader 3.70 metre blade hour 5419.000 P&M-2002
(iii) Motor grader 3.35 metre blade hour 2.929 4747.000 13902.091 P&M-2003
Water tanker ( speed @ 20km/hr and return speed @ 30
km/hr and spreading speed @ 2.5 km/hr )
Unit = cum
Taking output = 225
a) Labour
Mate day 0.040 370.000 14.800 L-12
Mazdoor day 1.000 300.000 300.000 L-13
b) Machinery
Motor grader for ripping (in two layers) & grading
Unit = cum
Taking output = 300
a) Labour
Mate day 0.040 370.000 14.800 L-12
Mazdoor day 1.000 300.000 300.000 L-13
b) Machinery
Motor grader for ripping & grading
(i) Motor grader 4.30 metre blade hour 5907.000 P&M-2001
(ii) Motor grader 3.70 metre blade hour 5419.000 P&M-2002
(iii) Motor grader 3.35 metre blade hour 4.497 4747.000 21349.092 P&M-2003
Unit = cum
Taking output = 250
a) Labour
Mate day 0.040 370.000 14.800 L-12
Mazdoor day 1.000 300.000 300.000 L-13
b) Machinery
Motor grader
(i) Motor grader 4.30 metre blade hour 5907.000 P&M-2001
(ii) Motor grader 3.70 metre blade hour 5419.000 P&M-2002
(iii) Motor grader 3.35 metre blade hour 2.260 4747.000 10726.922 P&M-2003
Hydraulic Excavator for reapplication
(i) 1.2 cum bucket capacity hour 3293.000 P&M-3003
(ii) 1.1 cum bucket capacity hour 2965.000 P&M-3004
(iii) 0.9 cum bucket capacity hour 4.515 2689.000 12140.811 P&M-3005
Tipper
For transportation considering lead @ 1 km (20% of the
material needs to be transported)
(i) 18 cum capacity t.km 7.151 P&M-72002
(ii) 14 cum capacity t.km 8.120 P&M-73002
(iii) 10 cum capacity t.km 75.000 10.030 752.250 P&M-74002
For loading (20% of the material needs to be transported)
(i) Using by 18 cum capacity Tipper & 3.1 Cum capacity cum 88.41 P&M-77001
Loader
(ii) Using by 14 cum capacity Tipper & 2.1 Cum capacity cum 88.57 P&M-77002
Loader
(iii) Using by 10 cum capacity Tipper & 1 Cum capacity cum 50.000 123.36 6168.00 P&M-77003
Loader
c) Overhead charges @ 0.12 on 3612.334
(a+b)
d) Contractor's profit @ 10% on 3371.512
(a+b+c)
Cost for 250 sqm = a+b+c+d 37086.629
Rate per sqm = (a+b+c+d)/250 148.347
Say, 148.30
3.22 Stripping, Storing and Re-laying Top Soil from Borrow Areas in
Agriculture Fields.
Stripping of top soil from borrow areas located in agriculture
fields, storing at a suitable place, spreading and re-laying after
taking the borrow earth to maintain fertility of the agricultural
field, finishing it to the required levels and satisfaction of the
farmer.
Unit = cum
Taking output = 250
a) Labour
Mate day 0.040 370.000 14.800 L-12
Mazdoor day 1.000 300.000 300.000 L-13
b) Machinery
Motor grader
(i) Motor grader 4.30 metre blade hour 5907.000 P&M-2001
(ii) Motor grader 3.70 metre blade hour 5419.000 P&M-2002
(iii) Motor grader 3.35 metre blade hour 2.260 4747.000 10726.922 P&M-2003
Hydraulic Excavator for reapplication
(i) 1.2 cum bucket capacity hour 3293.000 P&M-3003
(ii) 1.1 cum bucket capacity hour 2965.000 P&M-3004
(iii) 0.9 cum bucket capacity hour 4.515 2689.000 12140.811 P&M-3005
Tipper
For transportation
(i) 18 cum capacity t.km 7.151 P&M-72002
(ii) 14 cum capacity t.km 8.120 P&M-73002
(iii) 10 cum capacity t.km 250x1.6 x L2 10.030 8024.000 P&M-74002
For loading & unloading
(i) Using by 18 cum capacity Tipper & 3.1 Cum capacity cum 88.41 P&M-77001
Loader
(ii) Using by 14 cum capacity Tipper & 2.1 Cum capacity cum 88.57 P&M-77002
Loader
(iii) Using by 10 cum capacity Tipper & 1 Cum capacity cum 250.000 123.36 30840.00 P&M-77003
Loader
c) Overhead charges @ 0.12 on 7445.584
(a+b)
d) Contractor's profit @ 10% on 6949.212
(a+b+c)
Cost for 250 sqm = a+b+c+d 76441.329
Rate per sqm = (a+b+c+d)/250 305.765
Say, 305.80
3.23 307 Turfing with Sods
Furnishing and laying of the live sods of perennial turf forming
grass on embankment slope, verges or other locations shown on
the drawing or as directed by the engineer including preparation
of ground, fetching of sods and watering.
Unit = sqm
Taking output = 100
a) Labour
Mate day 0.120 370.000 44.400 L-12
Mazdoor for preparation of ground and fetching of sods day 3.000 300.000 900.000 L-13
b) Machinery
Water tanker including watering for 3 months
Water tanker ( speed @ 20km/hr and return speed @ 30
km/hr and spreading speed @ 2.5 km/hr )
Unit = metre
Taking output = 10 Cum
A Mechanical Means
a) Labour
Mate day 0.020 370.000 7.400 L-12
Mazdoor for dressing of bed and side of drain day 0.500 300.000 150.000 L-13
b) Machinery
Hydraulic Excavator 0.9 cum bucket capacity hour 0.112 2689.000 299.949 P&M-3005
Tractor-trolley
Tractor-trolley for transportation & for loading & Unloding hour 0.267 873.000 233.180 P&M-12001
Time
Unit = metre
Taking output = 10
a) Labour
Mate day 0.040 370.000 14.800 L-12
Mazdoor for excavation and back filling day 2.000 300.000 600.000 L-13
c) Material
Perforated pipe of cement concrete, internal dia 100 mm metre 10.000 1200.00 12000.000 M-134
Crushed stone as per table 300-3 cum 2.400 3007.48 7217.961 M-011
d) Overhead charges @ 10% on (a+b+c) 2379.931
e) Contractor's profit @ 10% on (a+b+c+d) 2221.269
Cost for 10 metres = a+b+c+d+e 24433.962
Rate per metre = (a+b+c+d+e)/10 2443.396
Say, 2443.40
Note Type of pipe may be modified depending upon provision in
design.
b) Material
Crushed stone as per table 300-3 cum 1.350 3007.48 4060.103 M-011
c) Overhead charges @ 0.12 on 542.100
(a+b)
d) Contractor's profit @ 10% on 505.960
(a+b+c)
Cost for 10 metres = a+b+c+d 5565.564
Rate per metre = (a+b+c+d)/10 556.556
Say, 556.60
3.30 309 Underground Drain at Edge of Pavement
Construction of an underground drain 1 m x 1 m (inside
dimensions) lined with RCC-20 cm thick and covered with RCC
slab10 cm in thickness on urban roads.
Unit = sqm
Taking output = 3500 Cum
a) Labour
Mate day 0.280 370.000 103.600 L-12
Mazdoor day 6.000 300.000 1800.000 L-13
Mazdoor skilled day 1.000 310.000 310.000 L-15
b) Machinery
Water tanker ( speed @ 20km/hr and return speed @ 30
km/hr and spreading speed @ 2.5 km/hr )
Unit = cum
Taking output = 500
a) Labour
Mate day 0.040 370.000 14.800 L-12
Mazdoor day 1.000 300.000 300.000 L-13
b) Machinery
Dozer
Dozer (240HP) hour 6273.00 P&M-1001
Dozer (175 HP) hour 4845.00 P&M-1002
Dozer (90 HP) hour 8.621 3336.00 28758.621 P&M-1003
Tipper for transportation of rock considering lead @ 5 km
Compensation for earth taken from private land cum 67.500 0.000 0.000 M-093
d) Overhead charges @ 0.12 on 4410.882
(a+b+c)
e) Contractor's profit @ 10% on 4116.823
(a+b+c+d)
Cost for 450 cum = a+b+c+d+e 45285.053
Rate per cum = (a+b+c+d+e)/450 100.633
Say, 100.60
Note 1.As flyash is available free of cost as waste material from
Thermal Plants, cost of material has not been added.
33712.53
38275.353
56.44
50.00
0.19
28.33
INPUT!$A$34+INPUT!$A$83
106984.34
4269.72
3.99%
73761.50
5961.97
8.08%
41715.25
6520.42
15.63%
75115.55
6520.90
8.68%
3.2142857
1.3132296
1.2264583
1.092233
19.6875
1.2264583
1.2264583
1.2264583
1.092233
5000000
CHAPTER-4
SUB-BASES, BASES ( NON- BITUMINOUS) AND SHOULDERS
Amount
Reference to Quantity
Rate (Rs.) Remarks/ Input
Sr No MORT&H Description Unit
For Small (Rs.) ref.
Specification Small Project
Project
4.1 401 Granular Sub-Base with Graded Material (Table:-
400-1)
A Plant Mix Method
Construction of granular sub-base by providing close
graded Material, mixing in a mechanical mix plant at
OMC, carriage of mixed Material to work site,
spreading in uniform layers with motor grader on
prepared surface and compacting with vibratory
power roller to achieve the desired density, complete
as per clause 401
Unit = cum
Taking output = 400 tonne
a) Labour
Mate day 0.080 370.000 29.600 L-12
Mazdoor skilled day 1.000 350.000 350.000 L-15
Mazdoor day 1.000 330.000 330.000 L-13
b) Machinery
Wet mix plant
(i) 250 tonne per hour hour 878.000 P&M-17001
(ii) 200 tonne per hour hour 583.000 P&M-17002
(iii) 100 tonne per hour hour 11.200 558.000 9833.600 P&M-17003
Electric generator
(i) 125 KVA hour 2277.000 P&M-22005
(ii) 100 KVA hour 1944.000 P&M-22006
(iii) 62.5 KVA hour 11.200 1250.000 25502.400 P&M-22007
Front end loader
(i) 3.1 Cum Capacity hour 4076.000 P&M-5001
(ii) 2.1 Cum Capacity hour 2515.000 P&M-5002
(iii) 1 Cum Capacity hour 29.371 1717.000 50429.371 P&M-5003
Tipper
For transportation
(i) 18 cum capacity t.km 7.151 P&M-72002
(ii) 14 cum capacity t.km 8.120 P&M-73002
(iii) 10 cum capacity t.km 840 x L1 10.030 3159.450 P&M-74002
For loading & unloading Time =315
(i) 18 cum capacity hour 2746.000 P&M-6001
(ii) 14 cum capacity hour 2435.000 P&M-6002
(iii) 10 cum capacity hour 11.200 2166.000 24259.200 P&M-6003
Motor grader
(i) Motor grader 4.30 metre blade hour 5907.000 P&M-2001
(ii) Motor grader 3.70 metre blade hour 5419.000 P&M-2002
(iii) Motor grader 3.35 metre blade hour 4.339 4747.000 20595.690 P&M-2003
Vibratory roller hour 2.589 2440.000 6317.152 P&M-7001
c) Material
Close graded Granular sub-base Material as per
table 400-1
For Grading-I Material
53 mm to 26.5 mm @27.5 per cent cum 148.077 3407.000 504498.077 M-028
26.5 mm to 9.5 mm @ 22.5 per cent cum 121.154 4351.000 527140.385 M-026
9.5 mm to 4.75 mm @ 10% cum 53.846 3671.000 197669.231 M-024
4.75 mm below @ 40 per cent cum 215.385 3601.000 775600.000 M-023
Cost of water KL 67.200 50.000 3360.000 M-191
OR
4.1A (i) Rate per cum for grading-I Material
d) Overhead charges @ 12% on 257888.899
(a+b+c)
e) Contractor's profit @ 10% on 240696.305
(a+b+c+d)
Cost for 400 cum = a+b+c+d+e 2647659.359
Rate per cum = (a+b+c+d+e)/400 6619.15
Add royality 538.46 160.00 215.38
Say, 6834.53
CHAPTER-6
CEMENT CONCRETE PAVEMENTS
Amount
Quantity
Reference to Rate (Rs.)
Sr No Description Unit Remarks/ Input ref.
MORT&H Specification For Small (Rs.)
Small Project
Project
6.1 601 Dry Lean Cement Concrete Sub- base
Construction of dry lean cement concrete Sub- base over a
prepared sub-grade with coarse and fine aggregate
conforming to IS: 383, the size of coarse aggregate not
exceeding 25 mm, aggregate cement ratio not to exceed 15:1,
aggregate gradation after blending to be as per table 600-1,
optimum moisture content to be determined during trial length
construction, concrete strength not to be less than 10 Mpa at 7
days, mixed in a batching plant, transported to site, laid with a
paver with electronic sensor, compacting with 8-10 tonnes
vibratory roller, finishing and curing.
Unit = cum
Taking output 450
990
a) Labour
Mate day 0.360 370.000 133.20 L-12
Mazdoor skilled day 2.000 350.000 700.00 L-15
Mazdoor day 7.000 330.000 2310.00 L-13
b) Machinery
Paver with electronic sensor
(i) Paver Finisher Concrete with 300 HP Motor hour 26770.000 P&M-30001
(ii) Paver Finisher Concrete with 241 HP Motor 17335.000 P&M-30002
(iii) Paver Finisher Concrete with 118 HP Motor 5.625 4302.000 24198.75 P&M-30003
Vibratory roller 8-10 t capacity hour 5.625 2440.000 13725.00 P&M-7001
Tipper
For Transportation
(i) 18 cum capacity t.km 7.151 P&M-72002
(ii) 14 cum capacity t.km 8.120 P&M-73002
(iii) 10 cum capacity t.km 990 x L1 10.030 3723.64 P&M-74002
371.25
For loading & unloading Time
(i) 18 cum capacity hour 2746.000 P&M-6001
(ii) 14 cum capacity hour 2435.000 P&M-6002
(iii) 10 cum capacity hour 10.625 2166.000 23013.75 P&M-6003
Water tanker ( speed @ 20km/hr and return speed @ 30
km/hr and spreading speed @ 2.5 km/hr )
(i) 16 KL capacity hour 1440.000 P&M-11001
(ii) 12 KL capacity hour 1270.000 P&M-11002
(iii) 6 KL capacity hour 12.075 967.000 11676.52 P&M-11003
c) Material
Concrete from sub-analysis of concrete Rate
(iii) Using Batching Plant 120 Cum Capacity cum 450.000 6633.17 2984926.52 21.18 c
Cost of water (Curing) KL 217.350 50.00 10867.50 M-191
Unit = cum
Taking output = 900 Tonne
a) Labour
Mate day 0.440 370.000 162.800 L-12
Mazdoor skilled day 5.000 350.000 1750.000 L-15
Mazdoor day 6.000 330.000 1980.000 L-13
b) Machinery
Mechanical broom @ 1250 sqm per hour hour 0.893 1009.000 900.893 P&M-23001
Air compressor 250 cfm hour 0.893 585.000 522.321 P&M-15001
Paver with electronic sensor
(i) Paver Finisher Concrete with 300 HP Motor hour 26770.000 P&M-30001
(ii) Paver Finisher Concrete with 241 HP Motor 17335.000 P&M-30002
(iii) Paver Finisher Concrete with 118 HP Motor 11.250 4302.000 48397.500 P&M-30003
Transit truck agitator
For Transportation Transit truck agitator 6 cum capacity t.km 2070 x L1 12.770 9912.713 P&M-76001
776.25
For unloding time hour 11.250 2299.000 25863.750 P&M-34001
Concrete joint cutting machine hour 101.587 487.000 49473.016 P&M-42001
Texturing machine
Texturing machine (TCM) - upto 18 m hour 4600.000 P&M-31001
Texturing machine (TCM) - upto 18 m 4600.000 P&M-31001
Texturing machine (TCM) - upto 9 m 11.250 3626.000 40792.500 P&M-31002
Water tanker ( speed @ 20km/hr and return speed @ 30
km/hr and spreading speed @ 2.5 km/hr )
(i) 16 KL capacity hour 1440.000 P&M-11001
(ii) 12 KL capacity hour 1270.000 P&M-11002
(iii) 6 KL capacity hour 68.250 967.000 65997.750 P&M-11003
c) Material
Concrete from sub-analysis of concrete Rate
(iii) Using Batching Plant 120 Cum Capacity cum 900.000 8351.99 7516795.360 21.19 C
36 mm mild steel dowel bars of grade S 240 tonne 9.170 48000.00 440160.000 M-125
12 mm deformed steel tie bars of grade S 415 tonne 1.051 48000.00 50448.000 M-083
Separation Membrane of impermeable plastic sheeting 125 sqm 3150.000 15.00 47250.000 M-165
micron thick (including 5% Overlap)
Joint sealant kg 609.524 55.00 33523.810 M-119
Sealant primer kg 100.003 155.00 15500.443 M-097
Plastic sheath,1.25 mm thick for dowel bars sqm 155.735 50.00 7786.752 M-137
Curing compound Liter 600.000 60.00 36000.000 M-091
Cost of water (Curing) KL 472.500 50.00 23625.000 M-191
Add 1 per cent of material for cost of miscellaneous materials
like tarpauline, Hessian cloth, metal cap, cotton / compressible
sponge and cradle for dowel bars, work bridges for men to
approach concrete surface without walking over it, cutting
blades and bites, minor equipments like scabbling machine,
threads, ropes, guide wires and any other unforeseen items.
Unit = Each
Taking output = one traffic sign
Item No. - 9.01 A -
i) Excavation for foundation cum 0.122 120.68 14.66
(I)
7432.49 Item No. - 9.14 A,
ii) Cement concrete M15 grade cum 0.122 903.05
case - II
iii) Painting angle iron post two coats sqm 1.414 50.02 70.71 Item No. - 8.9
a) Labour (For fixing at site)
Mate day 0.010 370.00 3.70 M-004
Mazdoor day 0.250 330.00 82.50 M-005
b) Material
Mild Steel 'L' Angle Back Support Frame 25 x 25 x
kg 2.200 65.00 143.00 M-181/1000
3mm
Mild Steel circular pipe 65 NB ,3.2 mm thicknness,
kg 20.556 65.00 1336.14 M-181/1000
3.6 meter height
Aluminium sheeting fixed with encapsulated lens type
reflective sheeting of size including lettering and signs as
applicable
Add 2 per cent of cost of angle iron towards cost of
drilling holes, nuts, bolts etc.
(xii) 60 cm x 45 cm rectangular sqm 0.270 4791.43 1293.69 M-061
(xii) 60 cm x 45 cm rectangular
d) Overhead charges @ 0.12 on
462.74
(a+b+c)
e) Contractor's profit @ 10% on
431.89
(a+b+c+d)
Rate per traffic sign = ( i+ii+iii+a+b+c+d+e) 4750.82
say 4751.00
Page 2 of 425
Road Marking with Hot Applied Thermoplastic
8.13 803 Compound with Reflectorising Glass Beads on
Bituminous Surface
Providing and laying of hot applied thermoplastic
compound 2.5 mm thick including reflectorising glass
beads @ 250 gms per sqm area, thickness of 2.5 mm is
exclusive of surface applied glass beads as per
IRC:35 .The finished surface to be level, uniform and free
from streaks and holes.
Unit = sqm
Taking output = 600 sqm
a) Labour
Mate day 0.030 370.00 11.10 L-12
Mazdoor day 0.750 330.00 247.50 L-13
b) Machinery
Road marking machine @ 60 sqm per hour hour 10.000 1859.00 18590.00 P&M-40001
Tractor-trolley hour 0.500 873.00 436.50 P&M-12001
c) Material
Hot applied thermoplastic compound Litre 1500.000 160.00 240000.00 M-117
Reflectorising glass beads kg 150.000 60.00 9000.00 M-153
d) Overhead charges @ 0.12 on
32194.21
(a+b+c)
e) Contractor's profit @ 10% on
30047.93
(a+b+c+d)
Cost for 600 sqm = a+b+c+d+e 330527.24
Rate per sqm = a+b+c+d+e)/600 550.88
say 551.00
1. A sealing primer may be applied in advance on
cement concrete pavement to ensure proper bonding.
Note Any laitance and/or curing compound to be removed
where paint is required to be applied on concrete
surface.
2.Cost of painter is already included in hire charges of
road marking machine.
Page 3 of 425
8.14 804 Kilometre Stone
Reinforced cement concrete M15grade kilometre stone
of standard design as per IRC:8, fixing in position
including painting and printing etc
8.14 (ii) Ordinary kilometer stone (precast)
Unit = Nos.
Taking output = 14 Nos.
7432.49 28020.49 Item No. - 9.14
a) M-15 grade of concrete cum 3.770
Case II
101.54 2672.56 Item No. - 9.16 /
b) Steel reinforcement @ 5 kg per sqm kg 26.320
1000
c) Excavation in soil for foundation cum 2.770 143.00 396.11 Item No. - 9.01 A
d) Painting two coats on concrete surface sqm 11.410 84.00 958.44 Item No. - 8.8
e) Lettering on km post ( average 12 letters of 10 per cm per 1.00 1680.00 Item No. - 8.3
1680.000
cm height each) letter
Transportation and fixing
f) Labour
Mate day 0.320 370.00 118.40 L-12
Mason day 1.000 480.00 480.00 L-11
Mazdoor day 7.000 330.00 2310.00 L-13
g) Machinery
Tractor-trolley hour 6.000 873.00 5238.00 P&M-12001
h) Overhead charges @ 0.12 on
977.57
(f+g)
i) Contractor's profit @ 10% on
912.40
(f+g+h)
Cost for 14 Nos. ordinary km stone = (a+b+ c
43763.97
+d+e+f+g+h+i)
Rate for each ordinary km stone = (a+b+ c
3126.00
+d+e+f+g+h+j) /14
say 3126.00
8.14 (iii) Hectometer stone (precast)
Unit = Nos.
Taking output = 33 Nos.
7432.49 11743.34 Item No. - 9.14
a) M-15 grade of concrete cum 1.580
Case II
101.54 6701.71 Item No. - 9.16 /
b) Steel reinforcement @ 5 kg per sqm kg 66.000
1000
c) Excavation in soil for foundation cum 1.390 143.00 198.77 Item No. - 9.01 A
d) Painting two coats on concrete surface sqm 6.270 84.00 526.68 Item No. - 8.8
e) Lettering on km post (average 1 letter of 10 cm per cm per 1.00 330.00 Item No. - 8.3
330.000
height each) letter
Transportation and fixing
f) Labour
Mate day 0.340 370.00 125.80 L-12
Mason day 1.500 480.00 720.00 L-11
Mazdoor day 7.000 330.00 2310.00 L-13
g) Machinery
Tractor-trolley hour 6.000 873.00 5238.00 P&M-12001
h) Overhead charges @ 0.12 on
1007.26
(f+g)
i) Contractor's profit @ 10% on
940.11
(f+g+h)
Cost for 33 Nos. Hectometer stone = (a+b +c +d+e+f+
29841.65
g+h+i)
Rate for each Hectometer stone = (a+b +c +d+e+f+
904.29
g+h+i) / 33
say 904.00
The rate for excavation, cement concrete, steel
Note reinforcement, painting and lettering may be taken from
respective chapters.
Page 4 of 425
8.15 805 Road Delineators
Supplying and installation of delineators (road way
indicators, hazard markers, object markers), 80-100 cm
high above ground level, painted black and white in 15
cm wide strips, fitted with 80 x 100 mm rectangular or 75
mm dia circular reflectorised panels at the top, buried or
pressed into the ground and conforming toIRC-79 and
the drawings.
Unit = Each
Taking output= 30 Nos.
a) Labour
Mate day 0.040 370.00 14.80 L-12
Mazdoor for fixing day 1.000 330.00 330.00 L-13
b) Material
M-092
Cost of approved type of delineators from ISI certified
each 30.000 2100.00 63000.00
firm as per the standard drawing given in IRC - 79
Add 10 per cent cost of material for installation 6300.00
c) Overhead charges @ 0.12 on
8357.38
(a+b)
d) Contractor's profit @ 10% on
7800.22
(a+b+c)
Cost for 30 Nos. delineators = (a+b+ c+d) 85802.39
Rate per delineators = (a+b+c+d) /30 2860.08
say 2860.00
In case of soft ground, a proper foundation may be
provided as per approved design. In case foundation is
Note required to be provided, the items of excavation and
foundation concrete are required to be measured and
paid separately.
8.23 811 Metal Beam Crash Barrier
A Type - A, "W" : Metal Beam Crash Barrier
Page 5 of 425
CHAPTER-9
CULVERTS & BOX CELL
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
9.01 304 Excavation for Structures
Earth work in excavation of foundation of structures as
per drawing and technical specification, including
setting out, construction of shoring and bracing,
removal of stumps and other deleterious matter,
dressing of sides and bottom and backfilling with
approved material.
I Ordinary soil
Unit = cum
Taking output = 10 cum
A Manual Means
(i) Depth upto 3 m
a) Labour
Mate day 0.14 370.00 51.80 L-12
Mazdoor day 3.50 330.00 1155.00 L-13
Per Cum Basic Cost of Labour, Material & Machinery 120.68
(a+b+c)
b) Overhead charges @ 12% on (a) 144.82
Page 1 of 425
b) Overhead charges @ 18% on (a) 339.98
Page 2 of 425
c) Overhead charges @ 18% on 6605.87
(a+b)
d) Contractor's profit @ 10% on 4330.52
(a+b+c)
Cost for 300 cum = a+b+c+d 47635.69
Rate per cum = (a+b+c+d)/300 158.79
say 159.00
9.1 B (iii) Mechanical Means (Depth above 6 m)
Unit = cum
Taking output = 270
a) Labour
Mate day 0.320 370.00 118.40 L-12
Mazdoor day 8.000 300.00 2400.00 L-13
b) Machinery
Hydraulic Excavator
For excavation
(i) 1.2 cum bucket capacity hour 3293.00 P&M-3003
(ii) 1.1 cum bucket capacity hour 2965.00 P&M-3004
(iii) 0.9 cum bucket capacity hour 7.619 2689.00 20487.62 P&M-3005
For backfilling (considering 60% of the excavated
material)
(i) 1.2 cum bucket capacity hour 3293.00 P&M-3003
(ii) 1.1 cum bucket capacity hour 2965.00 P&M-3004
(iii) 0.9 cum bucket capacity hour 4.571 2689.00 12292.57 P&M-3005
Tipper for transportation of excess material to
dumping yard considering lead @ 1 km
(i) 18 cum capacity t-km 7.15 P&M-72002
(ii) 14 cum capacity t-km 8.12 P&M-73002
(iii) 10 cum capacity t-km 162.000 10.03 1624.86 P&M-74002
c) Overhead charges @ 18% on 6646.22
(a+b)
d) Contractor's profit @ 10% on 4356.97
(a+b+c)
Cost for 270 cum = a+b+c+d 47926.64
Rate per cum = (a+b+c+d)/270 177.51
say 178.00
9.1 II Ordinary Rock (not requiring blasting)
A Manual Means
(i) Depth upto 3 m
Unit = cum
Taking output = 10 cum
a) Labour
Mate day 0.20 370.00 74.00 L-12
Mazdoor day 5.00 300.00 1500.00 L-13
b) Overhead charges @ 10% on (a) 283.32
c) Contractor's profit @ 10% on (a+b) 185.73
Cost for 10 cum = a+b+c 2043.05
Rate per cum = (a+b+c)/10 204.31
say 204.00
Note Cost of dewatering upto 10 per cent of labour cost
may be added, where required. Assessment for
dewatering shall be made as per site conditions..
9.1 B Mechanical Means
Unit = cum
Taking output = 50
a) Labour
Mate day 0.120 370.00 44.40 L-12
Mazdoor day 3.000 300.00 900.00 L-13
b) Machinery
Hydraulic Excavator
Excavator for excavation
(i) 1.2 cum bucket capacity hour 3293.00 P&M-3003
(ii) 1.1 cum bucket capacity hour 2965.00 P&M-3004
Page 3 of 425
(iii) 0.9 cum bucket capacity hour 7.273 2689.00 19556.36 P&M-3005
For loading
(i) 1.2 cum bucket capacity hour 3293.00 P&M-3003
(ii) 1.1 cum bucket capacity hour 2965.00 P&M-3004
(iii) 0.9 cum bucket capacity hour 1.405 2689.00 3777.14 P&M-3005
Jack Hammer hour 7.273 206.00 1498.18 P&M-4001
Tipper
For transportation considering lead @ 1km
(i) 18 cum capacity t-km 7.15 P&M-72002
(ii) 14 cum capacity t-km 8.12 P&M-73002
(iii) 10 cum capacity t-km 75.000 10.03 752.25 P&M-74002
For loading & unloading time
(i) 18 cum capacity hour 2746.00 P&M-6001
(ii) 14 cum capacity hour 2435.00 P&M-6002
(iii) 10 cum capacity hour 1.405 2166.00 3042.50 P&M-6003
c) Overhead charges @ 18% on 5322.75
(a+b)
d) Contractor's profit @ 10% on 3489.36
(a+b+c)
Cost for 50 cum = a+b+c+d 38382.95
Rate per cum = (a+b+c+d)/50 767.66
say 768.00
9.1 III Hard Rock ( requiring blasting )
A Manual Means
Unit = cum
Taking output = 10 cum
a) Labour
Mate day 0.35 370.00 129.50 L-12
Driller day 0.50 325.00 162.50 L-06
Blaster day 0.25 560.00 140.00 L-03
Mazdoor day 8.00 300.00 2400.00 L-13
b) Machinery
Air Compressor 250 cfm with 2 jack hammer for hour 1.00 585.00 585.00 P&M-15001
drilling.
c) Material
Explosives (Blasting Material) kg 3.50 55.00 192.50 M-215
Detonator electric each 14.00 12.00 168.00 M-217
d) Overhead charges @ 18% on 679.95
(a+b+c)
e) Contractor's profit @ 10% on 445.75
(a+b+c+d)
Cost for 10 cum = a+b+c+d+e 4903.20
Rate per cum = (a+b+c+d+e)/10 490.32
say 490.00
Note Cost of dewatering @ 10 per cent of (a+b) may be
added, where required Assessment for dewatering
shall be made as per site conditions.
9.1 III Hard Rock ( requiring blasting )
Carrying out excavation in hard rock to achieve a
specified slope of the rock face by controlled use of
explosives and blasting accessories in properly aligned
and spaced drill holes, collection of the excavated rock
by a dozer, loading in tipper by a front end loader and
disposing of the material with all lifts and lead upto
1000 m, all as specified in clause No. 303
B Mechanical Means
Unit = cum
Taking output = 120
a) Labour
Mate day 0.210 370.00 77.70 L-12
Mazdoor day 3.000 300.00 900.00 L-13
Driller day 2.000 325.00 650.00 L-06
Page 4 of 425
Blaster day 0.250 560.00 140.00 L-03
b) Machinery
Air compressor hour 6.000 585.00 3510.00 P&M-15001
Jack Hammer for drilling holes (@ 4.5 m per hour) hour 24.000 11.00 264.00 P&M-45001
Jack Hammer (consider 5% of the volume for hour 1.024 206.00 210.94 P&M-4001
dressing)
Hydraulic Excavator
Excavator for excavation
(i) 1.2 cum bucket capacity hour 3293.00 P&M-3003
(ii) 1.1 cum bucket capacity hour 2965.00 P&M-3004
(iii) 0.9 cum bucket capacity hour 1.024 2689.00 2753.54 P&M-3005
For loading
(i) 1.2 cum bucket capacity hour 3293.00 P&M-3003
(ii) 1.1 cum bucket capacity hour 2965.00 P&M-3004
(iii) 0.9 cum bucket capacity hour 3.371 2689.00 9065.14 P&M-3005
Tipper
For transportation considering lead @ 1 km
(i) 18 cum capacity t-km 7.15 P&M-72002
(ii) 14 cum capacity t-km 8.12 P&M-73002
(iii) 10 cum capacity t-km 180.000 10.03 1805.40 P&M-74002
For loading & unloading time
(i) 18 cum capacity hour 2746.00 P&M-6001
(ii) 14 cum capacity hour 2435.00 P&M-6002
(iii) 10 cum capacity hour 3.371 2166.00 7302.00 P&M-6003
c) Materials
Small dia.Explosive at 0.40 kg / cum for 120 cum kg 48.000 55.00 2640.00 M-215
( 120 x 0.40 )
Explosive at 0.20 kg / cum for secondary blast @
5%of the total volume ( 120 x 0.2x5% )
Electric detonators at 1 per hole for main blast no 69.000 12.00 828.00 M-217
holes (21x3+20*2)=103 nos
Ordinary detonators @ 1 per hole for 10 secondary no 7.000 55.00 385.00 M-216
holes( required for 5% of the total quantity @ 0.6 m
per hole for I cum )
Detonating fuse coil m 213.000 105.00 22365.00 M-218
d) Overhead charges @ 18% on 9521.41
(a+b+c)
e) Contractor's profit @ 10% on 6241.81
(a+b+c+d)
Cost for 120 cum = a+b+c+d+e 68659.95
Rate per cum = (a+b+c+d+e)/120 572.17
say 572.00
Page 5 of 425
For transportation to dumping yard considering lead
@ 1km
(i) 18 cum capacity t-km 7.15 P&M-72002
(ii) 14 cum capacity t-km 8.12 P&M-73002
(iii) 10 cum capacity t-km 52.500 10.03 526.57 P&M-74002
For loading & unloading time
(i) 18 cum capacity hour 2746.00 P&M-6001
(ii) 14 cum capacity hour 2435.00 P&M-6002
(iii) 10 cum capacity hour 0.983 2166.00 2129.75 P&M-6003
Page 6 of 425
(iii) 10 cum capacity hour 13.695 2166.00 29664.40 P&M-6003
c) Material
Selected earth for refilling cum 156.000 75.00 11700.00 M-164
d) Overhead charges @ 18% on 14835.24
(a+b+c)
e) Contractor's profit @ 10% on 9725.33
(a+b+c+d)
Cost for 260 cum = a+b+c+d 106978.59
Rate per cum = (a+b+c+d)/260 411.46
say 411.00
9.1 VI Back Filling in Marshy Foundation Pits
Unit : Cum
Taking Output : 6 cum
a) Labour
Mate day 0.12 370.00 44.40 L-12
Mazdoor for dressing sides, bottom and backfilling day 3.00 300.00 900.00 L-13
b) Machinery
Tractor-trolley for transportation hour 2.00 873.00 1746.00 P&M-12001
c) Overhead charges @ 18% on 484.27
(a+b)
d) Contractor's profit @ 10% on 317.47
(a+b+c)
Cost for 6 cum = a+b+c+d 3492.14
Rate per cum = (a+b+c+d)/6 582.02
say 582.00
9.2 304 Filling Annular Space Around Footing in Rock
Unit = cum
Taking out put = 1 cum
PCC-15 nominal mix. Rate may be taken as per item
9.14.
9.3 304 Sand Filling in Foundation Trenches as per Drawing &
Technical Specification
Unit = cum
Taking output = 100
a) Labour
Mate day 0.04 370.00 14.80 L-12
Mazdoor day 1.00 300.00 300.00 L-13
b) Machinery
Water tanker (speed @ 20km/hr and return speed
@ 30 km/hr and spreading @ 30 mins per trip )
Unit = cum
Taking output = 15
Page 7 of 425
a) Labour
Mate day 0.32 370.00 118.40 L-12
Mason day 1.00 430.00 430.00 L-11
Mazdoor day 7.00 300.00 2100.00 L-13
b) Material
Plain cement concrete 1:3:6 nominal mix using cum 15.00 6523.81 97857.09 Sub-Analysis of
batching plant (Rate as sub-analysis) Concrete - 19.02
Water KL 3.24 50.00 162.00 M-191
c) Machinery
Plate Compactor hour 1.00 569.00 569.00 P&M-46001
Water tanker (speed @ 20km/hr and return speed
@ 30 km/hr and spreading @ 30 mins per trip )
a) Material
Stone cum 5.50 2855.20 15703.58 M-170
Through and bond stone each 35.00 25.00 875.00 M-184
(35no.x0.24mx0.24mx0.39m = 0.79 cu.m)
Cement mortar 1:3 (Rate as sub-analysis) cum 1.50 6634.62 9951.93 Sub-Analysis of
Concrete - 19.01
(A)
b) Labour
Mate day 0.66 370.00 244.20 L-12
Mason day 7.50 430.00 3225.00 L-11
Mazdoor day 9.00 300.00 2700.00 L-13
c) Overhead charges @ 18% on 5885.95
(a+b)
d) Contractor's profit @ 10% on 3858.57
(a+b+c)
Cost for 5 cum = a+b+c+d 42444.22
Rate per cum (a+b+c+d)/5 8488.84
Page 9 of 425
say 8489.00
1405.3 (B) Random Rubble Masonry
( coursed/uncoursed )
Unit = cum
Taking output = 5
a) Material
Stone cum 5.50 2855.20 15703.58 M-147
Through and bond stone each 35.00 25.00 875.00 M-184
(35nos.x0.24mx0.24mx0.39m = 0.79 cu.m)
Cement mortar 1:3 (Rate as in sub-analysis) cum 1.55 6634.62 10283.66 Sub-Analysis of
Concrete - 19.01
(A)
b) Labour
Mate day 0.62 370.00 229.40 L-12
Mason day 6.00 430.00 2580.00 L-11
Mazdoor day 9.00 300.00 2700.00 L-13
c) Overhead charges @ 18% on 5826.89
(a+b)
d) Contractor's profit @ 10% on 3819.85
(a+b+c)
Cost for 5 cum = a+b+c+d 42018.39
Rate per cum (a+b+c+d)/5 8403.68
say 8404.00
Note The labour already considered in cement mortar has
been taken into account while proposing labour for
masonry works.
9.8 1300 & Brick masonry work in 1:3 in sub-structure complete
2200 excluding pointing and plastering, as per drawing and
Technical Specifications
Unit = cum
Taking output = 1
a) Material
Bricks Ist class each 500.00 7.10 3550.00 M-079
Cement mortar 1:3 (Rate as from sub-analysis) cum 0.24 6634.62 1592.31 Sub-Analysis of
Concrete - 19.01
(A)
Water for curing KL 0.48 50.00 24.15 M-191
b) Labour
Mate day 0.06 370.00 22.20 L-12
Mason day 0.80 430.00 344.00 L-11
Mazdoor day 0.80 300.00 240.00 L-13
Add for scaffolding @ 5 per cent of cost of material 288.63
and labour
c) Machinery
Water tanker (speed @ 20km/hr and return speed
@ 30 km/hr and spreading @ 30 mins per trip )
Page 10 of 425
Cement mortar 1:3 (Rate as from sub-analysis) cum 0.03 6634.62 199.04 Sub-Analysis of
Concrete - 19.01
(A)
b) Labour
Mate day 0.04 370.00 14.80 L-12
Mason day 0.50 430.00 215.00 L-11
Mazdoor day 0.50 300.00 150.00 L-13
c) Overhead charges @ 18% on 104.19
(a+b)
d) Contractor's profit @ 10% on 68.30
(a+b+c)
Rate per 10 sqm (a+b+c+d) 751.33
say 751.00
Note Scaffolding is already included in item 13.1
9.10 1300 & Plastering with cement mortar (1:3 ) on brick work in
2200 sub-structure as per Technical Specifications
Unit = 10 sqm
Taking output = 10
a) Material
Cement mortar 1:3 (Rate as from sub-analysis) cum 0.144 6634.62 955.38 Sub-Analysis of
Concrete - 19.01
(A)
Water for curing KL 0.14 50.00 6.96 M-191
b) Labour
Mate day 0.04 370.00 14.80 L-12
Mason day 0.50 430.00 215.00 L-11
Mazdoor day 0.50 300.00 150.00 L-13
c) Machinery
Water tanker (speed @ 20km/hr and return speed
@ 30 km/hr and spreading @ 30 mins per trip )
Unit = metre
Taking output = 12.5 metres ( 5 pipes of 2.5 m length
each )
A 1000 mm dia
a) Labour
Mate day 0.100 370.00 37.00 L-12
Mason day 0.500 480.00 240.00 L-11
Mazdoor day 2.000 330.00 660.00 L-13
b) Material
Sand at site cum 0.070 850.00 59.50 M-005
Cement at site tonne 0.050 5600.00 280.00 M-081
RCC pipe NP-4 /prestressed concrete pipe metre 12.500 7500.00 93750.00 M-148
including collar at site
Granular material passing 5.6 mm sieve for bedding cum 4.500 3671.00 16519.50 M-009
c) Machinery
Light Crane 3 tonnes capacity for placing of Hume hour 2.08 1032.00 2150.00 P&M-63001
pipe
d) Overhead charges @ 12% on 13643.52
(a+b+c)
e) Contractor's profit @ 10% on 12733.95
(a+b+c+d)
Cost for 12.5 metres = a+b+c+d 140073.47
Rate per metre = (a+b+c+d)/12.5 11205.88
say 11206.00
Note 1. In case of cement craddle bedding, quantity of PCC
M15 is to be calculated as per design and priced
separately and added .
Page 13 of 425
2. The rate analysis does not include excavation,
cement /masonry works in head walls, backfilling,
protection works and parapet walls. The same are to
be calculated as per approved design and drawings
and priced separately on rates available under
respective sections
Unit = metre
Taking output = 12.5 metres ( 10 pipes of 2.5 m length
each in two rows.)
A 1000 mm dia
a) Labour
Mate day 0.200 370.00 74.00 L-12
Mason day 1.000 430.00 430.00 L-11
Mazdoor day 4.000 300.00 1200.00 L-13
b) Material
Sand at site cum 0.140 3289.60 460.54 M-005
Cement at site tonne 0.100 5600.00 560.00 M-081
RCC pipe NP-4/prestressed concrete pipe including metre 25.000 7500.00 187500.00 M-148
collar at site
Granular material passing 5.6 mm sieve for bedding cum 12.500 3289.60 41120.00 M-009
c) Machinery
Page 14 of 425
Light Crane 3 tonnes capacity for handling Hume hour 4.17 1032.00 4300.00 P&M-63001
pipe
d) Overhead charges @ 18% on 42416.02
(a+b+c)
e) Contractor's profit @ 10% on 27806.06
(a+b+c+d)
Cost for 12.5 metres = a+b+c+d 305866.62
Rate per metre = (a+b+c+d)/12.5 24469.33
Note 1. In case of cement craddle bedding, quantity of PCC say 24469.00
M15 is to be calculated as per design and priced
separately and added .
2. The rate analysis does not include excavation,
cement /masonry works in head walls, backfilling,
protection works and parapet walls. The same are to
be calculated as per approved design and drawings
and priced separately on rates available under
respective sections
Page 15 of 425
Mason day 1.50 430.00 645.00 L-11
Mazdoor day 2.39 300.00 716.67 L-13
c) Machinery
Transit truck agitator
For transportation (6 cum Capacity) tonne-km 75 x L1 12.77 2873.25 P&M-76001
For unloading hour 0.69 2299.00 1596.53 P&M-34001
Hydraulic Boom placer pump hour 0.69 4192.00 2911.11 P&M-36001
Water tanker ( speed @ 20km/hr and return speed
@ 30 km/hr and 30 mins for unloading )
(i) 16 KL capacity hour 1440.00 P&M-11001
(ii) 12 KL capacity hour 1270.00 P&M-11002
(iii) 6 KL capacity hour 2.63 967.00 2538.38 P&M-11003
Per Cum Basic Cost of Labour, Material & Machinery 7085.00
(a+b+c)
d) Formwork @ 10 per cent on cost of concrete i.e. 21252.62
cost of material, labour and machinery
Unit = cum
Taking output = 15
a) Material
Per Cum Basic Cost (Rate as in sub-analysis) cum 15.00 6680.01 100200.10 Sub-Analysis of
Concrete - 19.03
Water for curing Kl 7.88 50.00 393.75 M-191
b) Labour
For pouring and placing
Mate day 0.38 370.00 140.60 L-12
Mason day 1.50 430.00 645.00 L-11
Mazdoor day 8.00 300.00 2400.00 L-13
c) Machinery
Transit truck agitator
For transportation (6 cum Capacity) tonne-km 37.5 x L1 12.77 1436.63 P&M-76001
For unloading hour 0.83 2299.00 1915.83 P&M-34001
Water tanker ( speed @ 20km/hr and return speed
@ 30 km/hr and 30 mins for unloading )
(i) 16 KL capacity hour 1440.00 P&M-11001
(ii) 12 KL capacity hour 1270.00 P&M-11002
(iii) 6 KL capacity hour 1.31 967.00 1269.19 P&M-11003
Per Cum Basic Cost of Labour, Material & Machinery 7227.00
(a+b+c)
d) Formwork @ 10 per cent on cost of concrete i.e. 10840.11
cost of material, labour and machinery
Page 17 of 425
Rate per cum = (a+b+c+d+e+f)/15 10882.09
say 10882.00
9.14 C RCC Grade M20
Case I RCC Grade M20 using batching plant transit mixer &
Concrete pump
Unit = cum
Taking output = 30
a) Material
Per Cum Basic Cost (Rate as in sub-analysis) cum 30.00 7106.76 213202.85 Sub-Analysis of
Concrete - 19.05
Water for curing Kl 15.75 50.00 787.50 M-191
b) Labour
For pouring and placing
Mate day 0.16 370.00 57.56 L-12
Mason day 1.50 430.00 645.00 L-11
Mazdoor day 2.39 300.00 716.67 L-13
c) Machinery
Transit truck agitator
For transportation (6 cum Capacity) tonne-km 75 x L1 12.77 2873.25 P&M-76001
For unloading hour 0.69 2299.00 1596.53 P&M-34001
Hydraulic Boom placer pump hour 0.69 4192.00 2911.11 P&M-36001
Water tanker ( speed @ 20km/hr and return speed
@ 30 km/hr and 30 mins for unloading )
(i) 16 KL capacity hour 1440.00 P&M-11001
(ii) 12 KL capacity hour 1270.00 P&M-11002
(iii) 6 KL capacity hour 2.63 967.00 2538.38 P&M-11003
Per Cum Basic Cost of Labour, Material & Machinery 7511.00
(a+b+c)
d) Formwork @ 10 per cent on cost of concrete i.e. 22532.88
cost of material, labour and machinery
Page 18 of 425
d) Formwork @ 10 per cent on cost of concrete i.e. 11511.72
cost of material, labour and machinery
Page 19 of 425
Water tanker ( speed @ 20km/hr and return speed
@ 30 km/hr and 30 mins for unloading )
(i) 16 KL capacity hour 1440.00 P&M-11001
(ii) 12 KL capacity hour 1270.00 P&M-11002
(iii) 6 KL capacity hour 1.31 967.00 1269.19 P&M-11003
Per Cum Basic Cost of Labour, Material & Machinery 7934.00
(a+b+c)
d) Formwork @ 10 per cent on cost of concrete i.e. 11900.94
cost of material, labour and machinery
Page 22 of 425
f) Contractor's profit @ 10% on 30709.43
(a+b+c+d+e)
Cost for 30 cum = a+b+c+d+e+f 337803.68
Rate per cum = (a+b+c+d+e+f)/30 11260.12
say 11260.00
Case II RCC Grade M30 using batching plant transit mixer &
manual placing
Unit = cum
Taking output = 15
a) Material
Per Cum Basic Cost (Rate as in sub-analysis) cum 15.00 7471.65 112074.78 Sub-Analysis of
Concrete - 19.09
Water for curing Kl 7.88 50.00 393.75 M-191
b) Labour
For pouring and placing
Mate day 0.42 370.00 155.40 L-12
Mason day 1.50 430.00 645.00 L-11
Mazdoor day 9.00 300.00 2700.00 L-13
c) Machinery
Transit truck agitator
For transportation (6 cum Capacity) tonne-km 37.5 x L1 12.77 1436.63 P&M-76001
For unloading hour 0.83 2299.00 1915.83 P&M-34001
Water tanker ( speed @ 20km/hr and return speed
@ 30 km/hr and 30 mins for unloading )
(i) 16 KL capacity hour 1440.00 P&M-11001
(ii) 12 KL capacity hour 1270.00 P&M-11002
(iii) 6 KL capacity hour 1.31 967.00 1269.19 P&M-11003
Per Cum Basic Cost of Labour, Material & Machinery 8040.00
(a+b+c)
d) Formwork @ 10 per cent on cost of concrete i.e. 12059.06
cost of material, labour and machinery
Page 23 of 425
Per Cum Basic Cost of Labour, Material & Machinery 7985.00
(a+b+c)
d) Formwork @ 10 per cent on cost of concrete i.e. 23952.65
cost of material, labour and machinery
Page 24 of 425
For unloading hour 0.69 2299.00 1596.53 P&M-34001
Hydraulic Boom placer pump hour 0.69 4192.00 2911.11 P&M-36001
Water tanker ( speed @ 20km/hr and return speed
@ 30 km/hr and 30 mins for unloading )
(i) 16 KL capacity hour 1440.00 P&M-11001
(ii) 12 KL capacity hour 1270.00 P&M-11002
(iii) 6 KL capacity hour 2.63 967.00 2538.38 P&M-11003
Per Cum Basic Cost of Labour, Material & Machinery 8073.00
(a+b+c)
d) Formwork @ 10 per cent on cost of concrete i.e. 24218.93
cost of material, labour and machinery
Page 25 of 425
Per Cum Basic Cost (Rate as in sub-analysis) cum 30.00 7106.76 213202.85 Sub-Analysis of
Concrete - 19.05
Water for curing Kl 15.75 50.00 787.50 M-191
b) Labour
For pouring and placing
Mate day 0.16 370.00 57.56 L-12
Mason day 1.50 430.00 645.00 L-11
Mazdoor day 2.39 300.00 716.67 L-13
c) Machinery
Transit truck agitator
For transportation (6 cum Capacity) tonne-km 75 x L 12.77 2873.25 P&M-76001
For unloading hour 0.69 2299.00 1596.53 P&M-34001
Hydraulic Boom placer pump hour 0.69 4192.00 2911.11 P&M-36001
Water tanker ( speed @ 20km/hr and return speed
@ 30 km/hr and 30 mins for unloading )
(i) 16 KL capacity hour 1440.00 P&M-11001
(ii) 12 KL capacity hour 1270.00 P&M-11002
(iii) 6 KL capacity hour 2.63 967.00 2538.38 P&M-11003
Per Cum Basic Cost of Labour, Material & Machinery 7511.00
(a+b+c)
d) Formwork @ 25 per cent on cost of concrete i.e. 56332.21
cost of material, labour and machinery
Page 26 of 425
Cost for 30 cum = a+b+c+d+e+f 382407.00
Rate per cum = (a+b+c+d+e+f)/30 12746.90
say 12747.00
9.15 C RCC Grade M30
RCC Grade M30 using batching plant transit mixer &
Concrete pump
Unit = cum
Taking output = 30
a) Material
Per Cum Basic Cost (Rate as in sub-analysis) cum 30.00 7471.65 224149.55 Sub-Analysis of
Concrete - 19.09
Water for curing Kl 15.75 50.00 787.50 M-191
b) Labour
For pouring and placing
Mate day 0.20 370.00 72.36 L-12
Mason day 1.50 430.00 645.00 L-11
Mazdoor day 3.39 300.00 1016.67 L-13
c) Machinery
Transit truck agitator
For transportation (6 cum Capacity) tonne-km 75 x L 12.77 2873.25 P&M-76001
For unloading hour 0.69 2299.00 1596.53 P&M-34001
Hydraulic Boom placer pump hour 0.69 4192.00 2911.11 P&M-36001
Water tanker ( speed @ 20km/hr and return speed
@ 30 km/hr and 30 mins for unloading )
(i) 16 KL capacity hour 1440.00 P&M-11001
(ii) 12 KL capacity hour 1270.00 P&M-11002
(iii) 6 KL capacity hour 2.63 967.00 2538.38 P&M-11003
Per Cum Basic Cost of Labour, Material & Machinery 7887.00
(a+b+c)
d) Formwork @ 25 per cent on cost of concrete i.e. 59147.58
cost of material, labour and machinery
Page 27 of 425
Per Cum Basic Cost of Labour, Material & Machinery 7985.00
(a+b+c)
d) Formwork @ 25 per cent on cost of concrete i.e. 59881.63
cost of material, labour and machinery
Unit = Nos.
Taking output = 30 Nos.
a) Material
AC pipe 100 mm dia. (including wastage @ 5 per metre 31.50 350.00 11025.00 M-056
cent )
Average length of weep hole is taken as one metre for
the purpose of estimating.
MS clamp each. 30.00 65.00 1950.00 M-122
collar for AC pipe (average) taking 10% of above each. 10.00 35.00 350.00 M-056/10
pipe rate
Cement mortar 1:3 (Rate as from sub-analysis) cum 0.05 6634.62 331.73 Sub-Analysis of
Concrete - 19.01
(A)
b) Labour
Mate day 0.03 370.00 11.10 L-12
Mason day 0.50 430.00 215.00 L-11
Mazdoor day 0.25 300.00 75.00 L-13
c) Overhead charges @ 18% on 2498.91
(a+b)
d) Contractor's profit @ 10% on 1645.67
(a+b+c)
Cost for 30 m = a+b+c+d 18102.41
Rate per m (a+b+c+d)/30 603.41
603.00
Note 1. In case of stone masonry, the size of the weep hole
shall be 150 mm x 80 mm or circular with 150 mm
diameter.
2. For structure in stone masonry, the weep holes shall
be deemed to be included in the item of stone masonry
work and shall not be paid separately.
Page 29 of 425
9.18 2700 PCC M15 Grade leveling course below approach slab
complete as per drawing and Technical specification
Unit = 1 cum
Taking output = 1 cum
a) Material
Case I PCC Grade M15 using batching plant & Concrete
pump
a) Material
Concrete, Rate as per item No. 9.14 (A) excluding cum 7047.00 Item No - 9.14 (A),
formworks Case-I
Concrete, Rate as per item No. 9.14 (A) excluding 7056.00 Item No - 9.14 (A),
formworks Case-I
Concrete, Rate as per item No. 9.14 (A) excluding 1.00 7085.00 7085.00 Item No - 9.14 (A),
formworks Case-I
b) Overhead charges @ 18% on (a) 1275.30
b) Material
Case II PCC Grade M15 using batching plant & manual placing
Concrete, Rate as per item No. 9.14 (A) excluding cum 7190.00 Item No - 9.14 (A),
formworks Case-II
Concrete, Rate as per item No. 9.14 (A) excluding 7198.00 Item No - 9.14 (A),
formworks Case-II
Concrete, Rate as per item No. 9.14 (A) excluding 1.00 7227.00 7227.00 Item No - 9.14 (A),
formworks Case-II
b) Overhead charges @ 18% on (a) 1300.86
Page 30 of 425
9.20 2705 Drainage Spouts complete as per drawing and
Technical specification
Unit = 1 No.
Taking output = 1 No.
a) Material
Corrosion resistant Structural steel including 5 per Kg 4.00 75.00 300.00 M-088/1000
cent wastage
GI pipe 100mm dia metre 6.00 350.00 2100.00 M-056
GI bolt 10 mm Dia each 6.00 25.00 150.00 M-109
Galvanised MS flat clamp each 2.00 10.00 20.00 M-101
b) Labour
For fabrication
Mate day 0.02 370.00 7.40 L-12
Skilled (Blacksmith, welder etc.) day 0.02 400.00 8.00 L-02
Mazdoor day 0.02 300.00 6.00 L-13
For fixing in position
Mate day 0.01 370.00 3.70 L-12
Mason day 0.01 430.00 4.30 L-11
Mazdoor day 0.20 300.00 60.00 L-13
Add @ 5 per cent of cost of material and labour for 132.97
electrodes, cutting gas, sealant, anti-corrosive
bituminous paint, mild steel grating etc.
c) Overhead charges @ 18% on 502.63
(a+b)
d) Contractor's profit @ 10% on 329.50
(a+b+c)
Rate per metre (a+b+c+d) 3624.50
say 3624.00
Note 1. In case of viaducts in urban areas, the drainage
spouts should be connected with suitably located
pipelines to discharge the surface run-off to drains
provided at ground level.
2. In case of bridges, sufficient length of G.I Pipe shall
be provided to ensure that there is no splashing of
water from the drainage spout on the structure.
Unit = 1 cum
Taking output = 1 cum
a) Material
Cement concrete M30 Grade Refer relevant item of cum 1.00 7858.00 7858.00 Item No - 9.15 (C)
concrete in Item 9.15 (C ) excluding formwork
HYSD bar reinforcement Rate as per item No 9.16 tonne 0.075 52752.00 3956.40 Item No - 9.16
(Excluding OH & CP)
b) Labour
Mazdoor for cleaning deck slab concrete surface. day 0.15 300.00 45.00 L-13
c) Overhead charges @ 18% on 2134.69
(a+b)
d) Contractor's profit @ 10% on 1399.41
(a+b+c)
Rate per cum (a+b+c+d) 15393.50
say 15394.00
9.22 516 & Mastic Asphalt
2702
Page 31 of 425
Providing and laying 12 mm thick mastic asphalt
wearing course on top of deck slab excluding prime
coat with paving grade bitumen meeting the
requirements given in Table 500-39, prepared by using
mastic cooker and laid to required level and slope after
cleaning the surface, including providing antiskid
surface with bitumen precoated fine grained hard stone
chipping of 9.5 mm nominal size at the rate of
0.005cum per 10 sqm and at an approximate spacing
of 10 cm center to center in both directions, pressed
into surface when the temperature of surfaces not less
than 100 deg. C, protruding 1 mm to 4 mm over mastic
surface, all complete as per clause 516.
Unit = sqm
Taking output = 72.46 sqm (2 tonnes)(0.869 cum)
assuming a density of 2.3 tonnes/cum.
a) Labour
Mate day 0.49 370.00 181.30 L-12
Mazdoor day 11.00 300.00 3300.00 L-13
Mazdoor (Skilled) day 1.25 310.00 387.50 L-15
b) Machinery
Mechanical broom @ 1250 sqm per hour hour 0.06 1009.00 60.54 P&M-23001
Air compressor 250 cfm hour 0.06 585.00 35.10 P&M-15001
Mastic cooker 1 tonne capacity hour 6.00 636.00 3816.00 P&M-27001
Bitumen boiler 1500 litres capacity hour 6.00 708.00 4248.00 P&M-26001
Tractor for towing and positioning of mastic cooker hour 1.00 873.00 873.00 P&M-12001
and bitumen boiler
c) Material
Base mastic (without coarse aggregates) = 60 per cent
vi) Bitumen for coating of chips @ 2 per cent by kg 1.05 34.51 36.24 M-074/1000
weight = 0.036 x 1.456 x 2/100 = 0.001048MT =
1.05kg
d) Overhead charges @ 18% on 4469.49
(a+b+c)
e) Contractor's profit @ 10% on 2930.00
(a+b+c+d)
Cost for 72.46 sqm = a+b+c+d+e 32230.02
Rate per sqm = (a+b+c+d+e)/72.46 444.80
say 445.00
Page 32 of 425
Note 1.The rates for 6 mm or any other thickness may be
worked out on pro-rata basis.
2. Where tack coat is required to be provided before
laying mastic asphalt, the same is required to be
measured and paid separately.
3.The quantities of binder, filler and aggregates are for
estimating purpose. Exact quantities shall be as per
mix design.
4.This rate analysis is based on design made by CRRI
for a specific case and is meant for estimating
purposes only. Actual design is required to be done for
each case.
5.The quantity of bitumen works out 17 per cent of the
mastic asphalt blocks without aggregates and falls
within the standards laid down by MoRTH
Specifications.
9.23 800 Crash Barriers
The rate analysis for rigid crash barrier in reinforced
cement concrete, semi-rigid crash barrier with metal
beam and flexible crash barrier with wire ropes have
been made and included in chapter-8 on Traffic and
Transportation.
9.24 800 Painting on concrete surface
Providing and applying 2 coats of water based cement
paint to unplastered concrete surface after cleaning the
surface of dirt, dust, oil, grease, efflorescence and
applying paint @ of 1 litre for 2 sqm.
Unit = sqm
Taking output = 10 sqm
a) Labour
Mate day 0.01 370.00 3.70 L-12
Painter day 0.25 450.00 112.50 L-18
Mazdoor (Skilled) day 0.25 310.00 77.50 L-15
b) Material
Water based paint of approved quality for cement Litres 5.00 120.00 600.00 M-192
concrete surface
c) Overhead charges @ 18% on 142.87
(a+b)
d) Contractor's profit @ 10% on 93.66
(a+b+c)
Cost for 10 sqm (a+b+c+d) 1030.22
Rate per sqm (a+b+c+d)/10 103.02
say 103.00
9.25 2605 Filler joint
(i) Providing & fixing 2 mm thick corrugated copper plate
in expansion joint complete as per drawing & Technical
Specification.
Unit = Running meter
Taking output = 12 m
a) Labour
Cutting, bending, carrying & fixing etc.
Mate day 0.04 370.00 14.80 L-12
Mazdoor day 0.50 300.00 150.00 L-13
Mazdoor (Skilled) day 0.50 310.00 155.00 L-15
b) Material
Copper plate - 12m long x 250 mm wide kg 55.00 620.00 34100.00 M-087
Area = 12 x 0.25 = 3 sqm
Weight = 3 x 0.002 x 8900 = 53.4 kg
Wastage @ 2.5 per cent = 1.33 kg/54.73 kg say = 55
kg.
Page 33 of 425
c) Overhead charges @ 18% on 6195.56
(a+b)
d) Contractor's profit @ 10% on 4061.54
(a+b+c)
Cost for 12 m = (a+b+c+d) 44676.90
Rate per m = (a+b+c+d)/12 3723.08
say 3723.00
9.25 (ii) Providing & fixing 20 mm thick compressible fibre
board in expansion joint complete as per drawing &
Technical Specification.
Unit = Running meter
Taking output = 12 m
a) Labour
For carrying, placing & fixing.
Mate day 0.008 370.00 2.96 L-12
Mazdoor day 0.10 300.00 30.00 L-13
Mazdoor (Skilled) day 0.10 310.00 31.00 L-15
b) Material
20 mm thick compressible fibre board 12 m long x sqm 3.00 115.00 345.00 M-085
25 cm deep.
Area = 12 x 0.25 = 3 sqm
c) Overhead charges @ 18% on 73.61
(a+b)
Page 34 of 425
d) Contractor's profit @ 10% on 48.26
(a+b+c)
Cost for 12 m = (a+b+c+d) 530.83
Rate per m = (a+b+c+d)/12 44.24
say 44.00
9.25 (iii) Providing and fixing in position 20 mm thick
premoulded joint filler in expansion joint for fixed ends
of simply supported spans not exceeding 10 m to cater
for a horizontal movement upto 20 mm, covered with
sealant complete as per drawing and technical
specifications.
Unit = cum
Taking output = 10 cum
A Granular material
a) Labour
Mate day 0.28 370.00 103.60 L-12
Mazdoor day 7.00 300.00 2100.00 L-13
Page 35 of 425
b) Material
Granular material cum 12.00 3289.60 39475.20 M-009
c) Machinery
Plate compactor/power rammer hour 2.50 569.00 1422.50 P&M-46001
Water Tanker hour 0.05 967.00 48.35 P&M-11003
d) Overhead charges @ 18% on 7766.94
(a+b+c)
e) Contractor's profit @ 10% on 5091.66
(a+b+c+d)
Cost for 10 cum of granular backfill = a+b+c+d+e 56008.25
Rate per cum = (a+b+c+d+e)/10 5600.82
say 5601.00
9.26 B Sandy material
a) Labour
Mate day 0.28 370.00 103.60 L-12
Mazdoor for filling, watering, ramming etc. day 7.00 300.00 2100.00 L-13
b) Material
Sand cum 12.00 850.00 10200.00 M-006
c) Machinery
Plate compactor/power rammer hour 2.50 569.00 1422.50 P&M-46001
Water Tanker hour 0.06 967.00 58.02 P&M-11003
d) Overhead charges @ 18% on 2499.14
(a+b+c)
e) Contractor's profit @ 10% on 1638.33
(a+b+c+d)
Cost for 10 cum of sandy backfill = a+b+c+d+e 18021.59
Rate per cum = (a+b+c+d+e)/10 1802.16
say 1802.00
9.27 710.1.4.of Providing and laying of Filter media with granular
IRC:78 materials/stone crushed aggregates satisfying the
and requirements laid down in clause 2504.2.2. of MoRTH
2504.2 specifications to a thickness of not less than 600 mm
with smaller size towards the soil and bigger size
towards the wall and provided over the entire surface
behind abutment, wing wall and return wall to the full
height compacted to a firm condition complete as per
drawing and Technical Specification.
Unit = cum
Taking output = 10 cum.
a) Labour
Mate day 0.32 370.00 118.40 L-12
Mazdoor for filling, watering, ramming etc. day 7.00 300.00 2100.00 L-13
Mazdoor (Skilled) day 1.00 310.00 310.00 L-15
b) Material
Filter media of stone aggregate conforming to cum 12.00 3007.48 36089.81 M-011
clause 2504.2.2. of MoRTH specifications.
c) Machinery
Water Tanker of 6 KL capacity hour 0.06 967.00 58.02 P&M-11003
d) Overhead charges @ 18% on 6961.72
(a+b+c)
e) Contractor's profit @ 10% on 4563.79
(a+b+c+d)
cost for 10 cum of Fiter Media = a+b+c+d+e 50201.74
Rate per cum = (a+b+c+d+e)/10 5020.17
5020.00
Page 36 of 425
CHAPTER-9
CULVERTS & BOX CELL
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small (Rs.) Small Project
Specification Project
15.01 304 Excavation for Structures
Earth work in excavation of foundation of structures as
per drawing and technical specification, including
setting out, construction of shoring and bracing,
removal of stumps and other deleterious matter,
dressing of sides and bottom and backfilling with
approved material.
I Ordinary soil
Unit = cum
Taking output = 10 cum
A Manual Means
(i) Depth upto 3 m
a) Labour
Mate day 0.14 370.00 51.80
Mazdoor day 3.50 330.00 1155.00
Per Cum Basic Cost of Labour, Material & Machinery 120.68
(a+b+c)
b) Overhead charges @ 20% on (a) 241.36
Page 1 of 425
b) Overhead charges @ 18% on (a) 339.98
Page 2 of 425
c) Overhead charges @ 18% on 6605.87
(a+b)
d) Contractor's profit @ 10% on 4330.52
(a+b+c)
Cost for 300 cum = a+b+c+d 47635.69
Rate per cum = (a+b+c+d)/300 158.79
say 159.00
9.1 B (iii) Mechanical Means (Depth above 6 m)
Unit = cum
Taking output = 270
a) Labour
Mate day 0.320 370.00 118.40
Mazdoor day 8.000 300.00 2400.00
b) Machinery
Hydraulic Excavator
For excavation
(i) 1.2 cum bucket capacity hour 3293.00
(ii) 1.1 cum bucket capacity hour 2965.00
(iii) 0.9 cum bucket capacity hour 7.619 2689.00 20487.62
For backfilling (considering 60% of the excavated
material)
(i) 1.2 cum bucket capacity hour 3293.00
(ii) 1.1 cum bucket capacity hour 2965.00
(iii) 0.9 cum bucket capacity hour 4.571 2689.00 12292.57
Tipper for transportation of excess material to
dumping yard considering lead @ 1 km
(i) 18 cum capacity t-km 7.15
(ii) 14 cum capacity t-km 8.12
(iii) 10 cum capacity t-km 162.000 10.03 1624.86
c) Overhead charges @ 18% on 6646.22
(a+b)
d) Contractor's profit @ 10% on 4356.97
(a+b+c)
Cost for 270 cum = a+b+c+d 47926.64
Rate per cum = (a+b+c+d)/270 177.51
say 178.00
9.1 II Ordinary Rock (not requiring blasting)
A Manual Means
(i) Depth upto 3 m
Unit = cum
Taking output = 10 cum
a) Labour
Mate day 0.20 370.00 74.00
Mazdoor day 5.00 300.00 1500.00
b) Overhead charges @ 10% on (a) 283.32
c) Contractor's profit @ 10% on (a+b) 185.73
Cost for 10 cum = a+b+c 2043.05
Rate per cum = (a+b+c)/10 204.31
say 204.00
Note Cost of dewatering upto 10 per cent of labour cost
may be added, where required. Assessment for
dewatering shall be made as per site conditions..
9.1 B Mechanical Means
Unit = cum
Taking output = 50
a) Labour
Mate day 0.120 370.00 44.40
Mazdoor day 3.000 300.00 900.00
b) Machinery
Hydraulic Excavator
Excavator for excavation
(i) 1.2 cum bucket capacity hour 3293.00
(ii) 1.1 cum bucket capacity hour 2965.00
Page 3 of 425
(iii) 0.9 cum bucket capacity hour 7.273 2689.00 19556.36
For loading
(i) 1.2 cum bucket capacity hour 3293.00
(ii) 1.1 cum bucket capacity hour 2965.00
(iii) 0.9 cum bucket capacity hour 1.405 2689.00 3777.14
Jack Hammer hour 7.273 206.00 1498.18
Tipper
For transportation considering lead @ 1km
(i) 18 cum capacity t-km 7.15
(ii) 14 cum capacity t-km 8.12
(iii) 10 cum capacity t-km 75.000 10.03 752.25
For loading & unloading time
(i) 18 cum capacity hour 2746.00
(ii) 14 cum capacity hour 2435.00
(iii) 10 cum capacity hour 1.405 2166.00 3042.50
c) Overhead charges @ 18% on 5322.75
(a+b)
d) Contractor's profit @ 10% on 3489.36
(a+b+c)
Cost for 50 cum = a+b+c+d 38382.95
Rate per cum = (a+b+c+d)/50 767.66
say 768.00
9.1 III Hard Rock ( requiring blasting )
A Manual Means
Unit = cum
Taking output = 10 cum
a) Labour
Mate day 0.35 370.00 129.50
Driller day 0.50 325.00 162.50
Blaster day 0.25 560.00 140.00
Mazdoor day 8.00 300.00 2400.00
b) Machinery
Air Compressor 250 cfm with 2 jack hammer for hour 1.00 585.00 585.00
drilling.
c) Material
Explosives (Blasting Material) kg 3.50 55.00 192.50
Detonator electric each 14.00 12.00 168.00
d) Overhead charges @ 18% on 679.95
(a+b+c)
e) Contractor's profit @ 10% on 445.75
(a+b+c+d)
Cost for 10 cum = a+b+c+d+e 4903.20
Rate per cum = (a+b+c+d+e)/10 490.32
say 490.00
Note Cost of dewatering @ 10 per cent of (a+b) may be
added, where required Assessment for dewatering
shall be made as per site conditions.
9.1 III Hard Rock ( requiring blasting )
Carrying out excavation in hard rock to achieve a
specified slope of the rock face by controlled use of
explosives and blasting accessories in properly aligned
and spaced drill holes, collection of the excavated rock
by a dozer, loading in tipper by a front end loader and
disposing of the material with all lifts and lead upto
1000 m, all as specified in clause No. 303
B Mechanical Means
Unit = cum
Taking output = 120
a) Labour
Mate day 0.210 370.00 77.70
Mazdoor day 3.000 300.00 900.00
Driller day 2.000 325.00 650.00
Page 4 of 425
Blaster day 0.250 560.00 140.00
b) Machinery
Air compressor hour 6.000 585.00 3510.00
Jack Hammer for drilling holes (@ 4.5 m per hour) hour 24.000 11.00 264.00
Jack Hammer (consider 5% of the volume for hour 1.024 206.00 210.94
dressing)
Hydraulic Excavator
Excavator for excavation
(i) 1.2 cum bucket capacity hour 3293.00
(ii) 1.1 cum bucket capacity hour 2965.00
(iii) 0.9 cum bucket capacity hour 1.024 2689.00 2753.54
For loading
(i) 1.2 cum bucket capacity hour 3293.00
(ii) 1.1 cum bucket capacity hour 2965.00
(iii) 0.9 cum bucket capacity hour 3.371 2689.00 9065.14
Tipper
For transportation considering lead @ 1 km
(i) 18 cum capacity t-km 7.15
(ii) 14 cum capacity t-km 8.12
(iii) 10 cum capacity t-km 180.000 10.03 1805.40
For loading & unloading time
(i) 18 cum capacity hour 2746.00
(ii) 14 cum capacity hour 2435.00
(iii) 10 cum capacity hour 3.371 2166.00 7302.00
c) Materials
Small dia.Explosive at 0.40 kg / cum for 120 cum kg 48.000 55.00 2640.00
( 120 x 0.40 )
Explosive at 0.20 kg / cum for secondary blast @
5%of the total volume ( 120 x 0.2x5% )
Electric detonators at 1 per hole for main blast no 69.000 12.00 828.00
holes (21x3+20*2)=103 nos
Ordinary detonators @ 1 per hole for 10 secondary no 7.000 55.00 385.00
holes( required for 5% of the total quantity @ 0.6 m
per hole for I cum )
Detonating fuse coil m 213.000 105.00 22365.00
d) Overhead charges @ 18% on 9521.41
(a+b+c)
e) Contractor's profit @ 10% on 6241.81
(a+b+c+d)
Cost for 120 cum = a+b+c+d+e 68659.95
Rate per cum = (a+b+c+d+e)/120 572.17
say 572.00
Page 5 of 425
For transportation to dumping yard considering lead
@ 1km
(i) 18 cum capacity t-km 7.15
(ii) 14 cum capacity t-km 8.12
(iii) 10 cum capacity t-km 52.500 10.03 526.57
For loading & unloading time
(i) 18 cum capacity hour 2746.00
(ii) 14 cum capacity hour 2435.00
(iii) 10 cum capacity hour 0.983 2166.00 2129.75
Page 6 of 425
(iii) 10 cum capacity hour 13.695 2166.00 29664.40
c) Material
Selected earth for refilling cum 156.000 75.00 11700.00
d) Overhead charges @ 18% on 14835.24
(a+b+c)
e) Contractor's profit @ 10% on 9725.33
(a+b+c+d)
Cost for 260 cum = a+b+c+d 106978.59
Rate per cum = (a+b+c+d)/260 411.46
say 411.00
9.1 VI Back Filling in Marshy Foundation Pits
Unit : Cum
Taking Output : 6 cum
a) Labour
Mate day 0.12 370.00 44.40
Mazdoor for dressing sides, bottom and backfilling day 3.00 300.00 900.00
b) Machinery
Tractor-trolley for transportation hour 2.00 873.00 1746.00
c) Overhead charges @ 18% on 484.27
(a+b)
d) Contractor's profit @ 10% on 317.47
(a+b+c)
Cost for 6 cum = a+b+c+d 3492.14
Rate per cum = (a+b+c+d)/6 582.02
say 582.00
9.2 304 Filling Annular Space Around Footing in Rock
Unit = cum
Taking out put = 1 cum
PCC-15 nominal mix. Rate may be taken as per item
9.14.
Page 7 of 425
15.03 304 Sand Filling in Foundation Trenches as per Drawing &
Technical Specification
Unit = cum
Taking output = 100
a) Labour
Mate day 0.04 370.00 14.80
Mazdoor day 1.00 330.00 330.00
b) Machinery
Water tanker (speed @ 20km/hr and return speed
@ 30 km/hr and spreading @ 30 mins per trip )
Page 8 of 425
15.11 1500,170 RCC grade M-25
0&2100 E RCC grade M-25 using batching plant trasit mixure &
manual placing
Case II Unit = cum
Taking output = 15
a) Labour
Mate day 0.420 370.00 155.40
Mason day 1.500 480.00 720.00
a) Material
Stone cum 5.50 2855.20 15703.58
Through and bond stone each 35.00 25.00 875.00
(35no.x0.24mx0.24mx0.39m = 0.79 cu.m)
Page 10 of 425
Cement mortar 1:3 (Rate as sub-analysis) cum 1.50 6634.62 9951.93
b) Labour
Mate day 0.66 370.00 244.20
Mason day 7.50 430.00 3225.00
Mazdoor day 9.00 300.00 2700.00
c) Overhead charges @ 18% on 5885.95
(a+b)
d) Contractor's profit @ 10% on 3858.57
(a+b+c)
say 8404.00
Note The labour already considered in cement mortar has
been taken into account while proposing labour for
masonry works.
9.8 1300 & Brick masonry work in 1:3 in sub-structure complete
2200 excluding pointing and plastering, as per drawing and
Technical Specifications
Unit = cum
Taking output = 1
a) Material
Bricks Ist class each 500.00 7.10 3550.00
Cement mortar 1:3 (Rate as from sub-analysis) cum 0.24 6634.62 1592.31
Water for curing KL 0.48 50.00 24.15
b) Labour
Mate day 0.06 370.00 22.20
Mason day 0.80 430.00 344.00
Mazdoor day 0.80 300.00 240.00
Add for scaffolding @ 5 per cent of cost of material 288.63
and labour
c) Machinery
Water tanker (speed @ 20km/hr and return speed
@ 30 km/hr and spreading @ 30 mins per trip )
Page 11 of 425
e) Contractor's profit @ 10% on 718.29
(a+b+c+d)
Rate per cum (a+b+c+d+e) 7901.24
say 7901.00
9.9 1300 & Pointing with cement mortar (1:3 ) on brick work in
2200 substructure as per Technical Specifications
Unit = 10 sqm
Taking output = 10 sqm
a) Material
Cement mortar 1:3 (Rate as from sub-analysis) cum 0.03 6634.62 199.04
b) Labour
Mate day 0.04 370.00 14.80
Mason day 0.50 430.00 215.00
Mazdoor day 0.50 300.00 150.00
c) Overhead charges @ 18% on 104.19
(a+b)
d) Contractor's profit @ 10% on 68.30
(a+b+c)
Rate per 10 sqm (a+b+c+d) 751.33
say 751.00
Note Scaffolding is already included in item 13.1
9.10 1300 & Plastering with cement mortar (1:3 ) on brick work in
2200 sub-structure as per Technical Specifications
Unit = 10 sqm
Taking output = 10
a) Material
Cement mortar 1:3 (Rate as from sub-analysis) cum 0.144 6634.62 955.38
Water for curing KL 0.14 50.00 6.96
b) Labour
Mate day 0.04 370.00 14.80
Mason day 0.50 430.00 215.00
Mazdoor day 0.50 300.00 150.00
c) Machinery
Water tanker (speed @ 20km/hr and return speed
@ 30 km/hr and spreading @ 30 mins per trip )
Page 12 of 425
a) Material
Stone cum 1.00 2855.20 2855.20
Through and bond stone No 7.00 25.00 175.00
(7no.x0.24mx0.24mx0.39m = 0.16 cu.m)
Cement mortar 1:3 (Rate as from sub-analysis) cum 0.33 6634.62 2189.42
Water for curing KL 0.97 50.00 48.30
b) Labour
Mate day 0.10 370.00 37.00
Mason day 1.20 430.00 516.00
Mazdoor day 1.20 300.00 360.00
Add for scaffolding @ 5 per cent of cost of a) 309.05
Material and b) Labour
c) Machinery
Water tanker (speed @ 20km/hr and return speed
@ 30 km/hr and spreading @ 30 mins per trip )
Page 13 of 425
Cement mortar 1:3 (Rate as in Item 12.6) cum 0.33 6634.62 2189.42
Water for curing KL 0.97 50.00 48.30
b) Labour for masonry work
Mate day 0.20 370.00 74.00
Mason day 2.50 430.00 1075.00
Mazdoor day 2.50 300.00 750.00
Add for scaffolding @ 5 per cent of cost of a) 374.05
Material and b) Labour
c) Machinery
Water tanker (speed @ 20km/hr and return speed
@ 30 km/hr and spreading @ 30 mins per trip )
Unit = metre
Taking output = 12.5 metres ( 5 pipes of 2.5 m length
each )
A 1000 mm dia
a) Labour
Mate day 0.100 370.00 37.00
Mason day 0.500 430.00 215.00
Mazdoor day 2.000 300.00 600.00
b) Material
Sand at site cum 0.070 3289.60 230.27
Cement at site tonne 0.050 5600.00 280.00
RCC pipe NP-4 /prestressed concrete pipe metre 12.500 7500.00 93750.00
including collar at site
Granular material passing 5.6 mm sieve for bedding cum 4.500 3671.00 16519.50
c) Machinery
Light Crane 3 tonnes capacity for placing of Hume hour 2.08 1032.00 2150.00
pipe
d) Overhead charges @ 12% on 13653.81
(a+b+c)
e) Contractor's profit @ 10% on 12743.56
(a+b+c+d)
Cost for 12.5 metres = a+b+c+d 140179.14
Rate per metre = (a+b+c+d)/12.5 11214.33
say 11214.00
Note 1. In case of cement craddle bedding, quantity of PCC
M15 is to be calculated as per design and priced
separately and added .
Page 14 of 425
2. The rate analysis does not include excavation,
cement /masonry works in head walls, backfilling,
protection works and parapet walls. The same are to
be calculated as per approved design and drawings
and priced separately on rates available under
respective sections
Unit = metre
Taking output = 12.5 metres ( 10 pipes of 2.5 m length
each in two rows.)
A 1000 mm dia
a) Labour
Mate day 0.200 370.00 74.00
Mason day 1.000 430.00 430.00
Mazdoor day 4.000 300.00 1200.00
b) Material
Sand at site cum 0.140 3289.60 460.54
Cement at site tonne 0.100 5600.00 560.00
RCC pipe NP-4/prestressed concrete pipe including metre 25.000 7500.00 187500.00
collar at site
Granular material passing 5.6 mm sieve for bedding cum 12.500 3289.60 41120.00
c) Machinery
Page 15 of 425
Light Crane 3 tonnes capacity for handling Hume hour 4.17 1032.00 4300.00
pipe
d) Overhead charges @ 18% on 42416.02
(a+b+c)
e) Contractor's profit @ 10% on 27806.06
(a+b+c+d)
Cost for 12.5 metres = a+b+c+d 305866.62
Page 16 of 425
Mate day 0.16 370.00 57.56
Mason day 1.50 430.00 645.00
Mazdoor day 2.39 300.00 716.67
c) Machinery
Transit truck agitator
For transportation (6 cum Capacity) tonne-km 75 x L1 12.77 2873.25
For unloading hour 0.69 2299.00 1596.53
Hydraulic Boom placer pump hour 0.69 4192.00 2911.11
Water tanker ( speed @ 20km/hr and return speed
@ 30 km/hr and 30 mins for unloading )
(i) 16 KL capacity hour 1440.00
(ii) 12 KL capacity hour 1270.00
(iii) 6 KL capacity hour 2.63 967.00 2538.38
Per Cum Basic Cost of Labour, Material & Machinery 7085.00
(a+b+c)
d) Formwork @ 10 per cent on cost of concrete i.e. 21252.62
cost of material, labour and machinery
Unit = cum
Taking output = 15
a) Material
Per Cum Basic Cost (Rate as in sub-analysis) cum 15.00 6680.01 100200.10
Page 18 of 425
Cost for 15 cum = a+b+c+d+e+f 163231.36
Rate per cum = (a+b+c+d+e+f)/15 10882.09
say 10882.00
9.14 C RCC Grade M20
Case I RCC Grade M20 using batching plant transit mixer &
Concrete pump
Unit = cum
Taking output = 30
a) Material
Per Cum Basic Cost (Rate as in sub-analysis) cum 30.00 7106.76 213202.85
Page 19 of 425
d) Formwork @ 10 per cent on cost of concrete i.e. 11511.72
cost of material, labour and machinery
Page 20 of 425
Water tanker ( speed @ 20km/hr and return speed
@ 30 km/hr and 30 mins for unloading )
(i) 16 KL capacity hour 1440.00
(ii) 12 KL capacity hour 1270.00
(iii) 6 KL capacity hour 1.31 967.00 1269.19
Per Cum Basic Cost of Labour, Material & Machinery 7934.00
(a+b+c)
d) Formwork @ 10 per cent on cost of concrete i.e. 11900.94
cost of material, labour and machinery
Page 23 of 425
f) Contractor's profit @ 10% on 30709.43
(a+b+c+d+e)
Cost for 30 cum = a+b+c+d+e+f 337803.68
Rate per cum = (a+b+c+d+e+f)/30 11260.12
say 11260.00
Case II RCC Grade M30 using batching plant transit mixer &
manual placing
Unit = cum
Taking output = 15
a) Material
Per Cum Basic Cost (Rate as in sub-analysis) cum 15.00 7471.65 112074.78
Page 24 of 425
Per Cum Basic Cost of Labour, Material & Machinery 7985.00
(a+b+c)
d) Formwork @ 10 per cent on cost of concrete i.e. 23952.65
cost of material, labour and machinery
Page 25 of 425
For unloading hour 0.69 2299.00 1596.53
Hydraulic Boom placer pump hour 0.69 4192.00 2911.11
Water tanker ( speed @ 20km/hr and return speed
@ 30 km/hr and 30 mins for unloading )
(i) 16 KL capacity hour 1440.00
(ii) 12 KL capacity hour 1270.00
(iii) 6 KL capacity hour 2.63 967.00 2538.38
Per Cum Basic Cost of Labour, Material & Machinery 8073.00
(a+b+c)
d) Formwork @ 10 per cent on cost of concrete i.e. 24218.93
cost of material, labour and machinery
b) Labour
For pouring and placing
Mate day 0.42 370.00 155.40
Mason day 1.50 430.00 645.00
Mazdoor day 9.00 300.00 2700.00
c) Machinery
Transit truck agitator
For transportation (6 cum Capacity) tonne-km 37.5 x L 12.77 1436.63
For unloading hour 0.83 2299.00 1915.83
Water tanker ( speed @ 20km/hr and return speed
@ 30 km/hr and 30 mins for unloading )
(i) 16 KL capacity hour 1440.00
(ii) 12 KL capacity hour 1270.00
(iii) 6 KL capacity hour 1.31 967.00 1269.19
Per Cum Basic Cost of Labour, Material & Machinery 8227.00
(a+b+c)
d) Formwork @ 10 per cent on cost of concrete i.e. 12339.01
cost of material, labour and machinery
b) Labour
For pouring and placing
Mate day 0.16 370.00 57.56
Mason day 1.50 430.00 645.00
Mazdoor day 2.39 300.00 716.67
c) Machinery
Transit truck agitator
For transportation (6 cum Capacity) tonne-km 75 x L 12.77 2873.25
For unloading hour 0.69 2299.00 1596.53
Hydraulic Boom placer pump hour 0.69 4192.00 2911.11
Water tanker ( speed @ 20km/hr and return speed
@ 30 km/hr and 30 mins for unloading )
(i) 16 KL capacity hour 1440.00
(ii) 12 KL capacity hour 1270.00
(iii) 6 KL capacity hour 2.63 967.00 2538.38
Per Cum Basic Cost of Labour, Material & Machinery 7511.00
(a+b+c)
d) Formwork @ 25 per cent on cost of concrete i.e. 56332.21
cost of material, labour and machinery
b) Labour
For pouring and placing
Mate day 0.20 370.00 72.36
Mason day 1.50 430.00 645.00
Mazdoor day 3.39 300.00 1016.67
c) Machinery
Transit truck agitator
For transportation (6 cum Capacity) tonne-km 75 x L 12.77 2873.25
For unloading hour 0.69 2299.00 1596.53
Hydraulic Boom placer pump hour 0.69 4192.00 2911.11
Water tanker ( speed @ 20km/hr and return speed
@ 30 km/hr and 30 mins for unloading )
(i) 16 KL capacity hour 1440.00
(ii) 12 KL capacity hour 1270.00
(iii) 6 KL capacity hour 2.63 967.00 2538.38
Per Cum Basic Cost of Labour, Material & Machinery 7857.00
(a+b+c)
d) Formwork @ 25 per cent on cost of concrete i.e. 58922.50
cost of material, labour and machinery
Page 27 of 425
Rate per cum = (a+b+c+d+e+f)/30 12746.90
say 12747.00
9.15 C RCC Grade M30
RCC Grade M30 using batching plant transit mixer &
Concrete pump
Unit = cum
Taking output = 30
a) Material
Per Cum Basic Cost (Rate as in sub-analysis) cum 30.00 7471.65 224149.55
Water for curing Kl 15.75 50.00 787.50
b) Labour
For pouring and placing
Mate day 0.20 370.00 72.36
Mason day 1.50 430.00 645.00
Mazdoor day 3.39 300.00 1016.67
c) Machinery
Transit truck agitator
For transportation (6 cum Capacity) tonne-km 75 x L 12.77 2873.25
For unloading hour 0.69 2299.00 1596.53
Hydraulic Boom placer pump hour 0.69 4192.00 2911.11
Water tanker ( speed @ 20km/hr and return speed
@ 30 km/hr and 30 mins for unloading )
(i) 16 KL capacity hour 1440.00
(ii) 12 KL capacity hour 1270.00
(iii) 6 KL capacity hour 2.63 967.00 2538.38
Per Cum Basic Cost of Labour, Material & Machinery 7887.00
(a+b+c)
d) Formwork @ 25 per cent on cost of concrete i.e. 59147.58
cost of material, labour and machinery
b) Labour
For pouring and placing
Mate day 0.20 370.00 72.36
Mason day 1.50 430.00 645.00
Mazdoor day 3.39 300.00 1016.67
c) Machinery
Transit truck agitator
For transportation (6 cum Capacity) tonne-km 75 x L 12.77 2873.25
For unloading hour 0.69 2299.00 1596.53
Hydraulic Boom placer pump hour 0.69 4192.00 2911.11
Water tanker ( speed @ 20km/hr and return speed
@ 30 km/hr and 30 mins for unloading )
(i) 16 KL capacity hour 1440.00
(ii) 12 KL capacity hour 1270.00
(iii) 6 KL capacity hour 2.63 967.00 2538.38
Page 28 of 425
Per Cum Basic Cost of Labour, Material & Machinery 7985.00
(a+b+c)
d) Formwork @ 25 per cent on cost of concrete i.e. 59881.63
cost of material, labour and machinery
Tipper
Tipper for Transportation
(i) 18 cum capacity t.km 7.15
(ii) 14 cum capacity t.km 8.12
(iii) 10 cum capacity t.km 8xL 10.03 240.72
Loading & Unloading Time hour
(i) 18 cum capacity hour 2746.00
(ii) 14 cum capacity hour 2435.00
(iii) 10 cum capacity hour 1.78 2166.00 3850.67
Light weight Crane
At cutting bending yard hour 2.00 1032.00 2064.00
At site hour 2.00 1032.00 2064.00
Per MT Basic Cost of Labour, Material & Machinery 52898.00
(a+b+c)
say 68662.00
Unit = Nos.
Taking output = 30 Nos.
a) Material
AC pipe 100 mm dia. (including wastage @ 5 per metre 31.50 350.00 11025.00
cent )
Average length of weep hole is taken as one metre for
the purpose of estimating.
MS clamp each. 30.00 65.00 1950.00
collar for AC pipe (average) taking 10% of above each. 10.00 35.00 350.00
pipe rate
Cement mortar 1:3 (Rate as from sub-analysis) cum 0.05 6634.62 331.73
b) Labour
Page 30 of 425
2. For structure in stone masonry, the weep holes shall
be deemed to be included in the item of stone masonry
work and shall not be paid separately.
9.18 2700 PCC M15 Grade leveling course below approach slab
complete as per drawing and Technical specification
Unit = 1 cum
Taking output = 1 cum
a) Material
Case I PCC Grade M15 using batching plant & Concrete
pump
a) Material
Concrete, Rate as per item No. 9.14 (A) excluding cum 7047.00
formworks
Concrete, Rate as per item No. 9.14 (A) excluding 7056.00
formworks
Concrete, Rate as per item No. 9.14 (A) excluding 1.00 7085.00 7085.00
formworks
b) Overhead charges @ 18% on (a) 1275.30
b) Material
Case II PCC Grade M15 using batching plant & manual placing
Concrete, Rate as per item No. 9.14 (A) excluding cum 7190.00
formworks
Concrete, Rate as per item No. 9.14 (A) excluding 7198.00
formworks
Concrete, Rate as per item No. 9.14 (A) excluding 1.00 7227.00 7227.00
formworks
b) Overhead charges @ 18% on (a) 1300.86
Page 31 of 425
Note The grade of reinforced cement concrete may be
adopted as M30 for severe conditions and M25 for
moderate conditions.
9.20 2705 Drainage Spouts complete as per drawing and
Technical specification
Unit = 1 No.
Taking output = 1 No.
a) Material
Corrosion resistant Structural steel including 5 per Kg 4.00 75.00 300.00
cent wastage
GI pipe 100mm dia metre 6.00 350.00 2100.00
GI bolt 10 mm Dia each 6.00 25.00 150.00
Galvanised MS flat clamp each 2.00 10.00 20.00
b) Labour
For fabrication
Mate day 0.02 370.00 7.40
Skilled (Blacksmith, welder etc.) day 0.02 400.00 8.00
Mazdoor day 0.02 300.00 6.00
For fixing in position
Mate day 0.01 370.00 3.70
Mason day 0.01 430.00 4.30
Mazdoor day 0.20 300.00 60.00
Add @ 5 per cent of cost of material and labour for 132.97
electrodes, cutting gas, sealant, anti-corrosive
bituminous paint, mild steel grating etc.
c) Overhead charges @ 18% on 502.63
(a+b)
d) Contractor's profit @ 10% on 329.50
(a+b+c)
Rate per metre (a+b+c+d) 3624.50
say 3624.00
Note 1. In case of viaducts in urban areas, the drainage
spouts should be connected with suitably located
pipelines to discharge the surface run-off to drains
provided at ground level.
2. In case of bridges, sufficient length of G.I Pipe shall
be provided to ensure that there is no splashing of
water from the drainage spout on the structure.
Unit = 1 cum
Taking output = 1 cum
a) Material
Cement concrete M30 Grade Refer relevant item of cum 1.00 7858.00 7858.00
concrete in Item 9.15 (C ) excluding formwork
HYSD bar reinforcement Rate as per item No 9.16 tonne 0.075 52752.00 3956.40
(Excluding OH & CP)
b) Labour
Mazdoor for cleaning deck slab concrete surface. day 0.15 300.00 45.00
c) Overhead charges @ 18% on 2134.69
(a+b)
d) Contractor's profit @ 10% on 1399.41
(a+b+c)
Rate per cum (a+b+c+d) 15393.50
say 15394.00
9.22 516 & Mastic Asphalt
2702
Page 32 of 425
Providing and laying 12 mm thick mastic asphalt
wearing course on top of deck slab excluding prime
coat with paving grade bitumen meeting the
requirements given in Table 500-39, prepared by using
mastic cooker and laid to required level and slope after
cleaning the surface, including providing antiskid
surface with bitumen precoated fine grained hard stone
chipping of 9.5 mm nominal size at the rate of
0.005cum per 10 sqm and at an approximate spacing
of 10 cm center to center in both directions, pressed
into surface when the temperature of surfaces not less
than 100 deg. C, protruding 1 mm to 4 mm over mastic
surface, all complete as per clause 516.
Unit = sqm
Taking output = 72.46 sqm (2 tonnes)(0.869 cum)
assuming a density of 2.3 tonnes/cum.
a) Labour
Mate day 0.49 370.00 181.30
Mazdoor day 11.00 300.00 3300.00
Mazdoor (Skilled) day 1.25 310.00 387.50
b) Machinery
Mechanical broom @ 1250 sqm per hour hour 0.06 1009.00 60.54
Air compressor 250 cfm hour 0.06 585.00 35.10
Mastic cooker 1 tonne capacity hour 6.00 636.00 3816.00
Bitumen boiler 1500 litres capacity hour 6.00 708.00 4248.00
Tractor for towing and positioning of mastic cooker hour 1.00 873.00 873.00
and bitumen boiler
c) Material
Base mastic (without coarse aggregates) = 60 per cent
vi) Bitumen for coating of chips @ 2 per cent by kg 1.05 34.51 36.24
weight = 0.036 x 1.456 x 2/100 = 0.001048MT =
1.05kg
d) Overhead charges @ 18% on 4469.49
(a+b+c)
e) Contractor's profit @ 10% on 2930.00
(a+b+c+d)
Cost for 72.46 sqm = a+b+c+d+e 32230.02
Rate per sqm = (a+b+c+d+e)/72.46 444.80
say 445.00
Page 33 of 425
Note 1.The rates for 6 mm or any other thickness may be
worked out on pro-rata basis.
2. Where tack coat is required to be provided before
laying mastic asphalt, the same is required to be
measured and paid separately.
3.The quantities of binder, filler and aggregates are for
estimating purpose. Exact quantities shall be as per
mix design.
4.This rate analysis is based on design made by CRRI
for a specific case and is meant for estimating
purposes only. Actual design is required to be done for
each case.
5.The quantity of bitumen works out 17 per cent of the
mastic asphalt blocks without aggregates and falls
within the standards laid down by MoRTH
Specifications.
9.23 800 Crash Barriers
The rate analysis for rigid crash barrier in reinforced
cement concrete, semi-rigid crash barrier with metal
beam and flexible crash barrier with wire ropes have
been made and included in chapter-8 on Traffic and
Transportation.
9.24 800 Painting on concrete surface
Providing and applying 2 coats of water based cement
paint to unplastered concrete surface after cleaning the
surface of dirt, dust, oil, grease, efflorescence and
applying paint @ of 1 litre for 2 sqm.
Unit = sqm
Taking output = 10 sqm
a) Labour
Mate day 0.01 370.00 3.70
Painter day 0.25 450.00 112.50
Mazdoor (Skilled) day 0.25 310.00 77.50
b) Material
Water based paint of approved quality for cement Litres 5.00 120.00 600.00
concrete surface
c) Overhead charges @ 18% on 142.87
(a+b)
d) Contractor's profit @ 10% on 93.66
(a+b+c)
Cost for 10 sqm (a+b+c+d) 1030.22
Rate per sqm (a+b+c+d)/10 103.02
say 103.00
9.25 2605 Filler joint
(i) Providing & fixing 2 mm thick corrugated copper plate
in expansion joint complete as per drawing & Technical
Specification.
Unit = Running meter
Taking output = 12 m
a) Labour
Cutting, bending, carrying & fixing etc.
Mate day 0.04 370.00 14.80
Mazdoor day 0.50 300.00 150.00
Mazdoor (Skilled) day 0.50 310.00 155.00
b) Material
Copper plate - 12m long x 250 mm wide kg 55.00 620.00 34100.00
Area = 12 x 0.25 = 3 sqm
Weight = 3 x 0.002 x 8900 = 53.4 kg
Wastage @ 2.5 per cent = 1.33 kg/54.73 kg say = 55
kg.
Page 34 of 425
c) Overhead charges @ 18% on 6195.56
(a+b)
d) Contractor's profit @ 10% on 4061.54
(a+b+c)
Cost for 12 m = (a+b+c+d) 44676.90
Rate per m = (a+b+c+d)/12 3723.08
say 3723.00
9.25 (ii) Providing & fixing 20 mm thick compressible fibre
board in expansion joint complete as per drawing &
Technical Specification.
Unit = Running meter
Taking output = 12 m
a) Labour
For carrying, placing & fixing.
Mate day 0.008 370.00 2.96
Mazdoor day 0.10 300.00 30.00
Mazdoor (Skilled) day 0.10 310.00 31.00
b) Material
20 mm thick compressible fibre board 12 m long x sqm 3.00 115.00 345.00
25 cm deep.
Area = 12 x 0.25 = 3 sqm
c) Overhead charges @ 18% on 73.61
(a+b)
Page 35 of 425
d) Contractor's profit @ 10% on 48.26
(a+b+c)
Cost for 12 m = (a+b+c+d) 530.83
Rate per m = (a+b+c+d)/12 44.24
say 44.00
9.25 (iii) Providing and fixing in position 20 mm thick
premoulded joint filler in expansion joint for fixed ends
of simply supported spans not exceeding 10 m to cater
for a horizontal movement upto 20 mm, covered with
sealant complete as per drawing and technical
specifications.
Unit = cum
Taking output = 10 cum
A Granular material
a) Labour
Mate day 0.28 370.00 103.60
Mazdoor day 7.00 300.00 2100.00
Page 36 of 425
b) Material
Granular material cum 12.00 3289.60 39475.20
c) Machinery
Plate compactor/power rammer hour 2.50 569.00 1422.50
Water Tanker hour 0.05 967.00 48.35
d) Overhead charges @ 18% on 7766.94
(a+b+c)
e) Contractor's profit @ 10% on 5091.66
(a+b+c+d)
Cost for 10 cum of granular backfill = a+b+c+d+e 56008.25
Rate per cum = (a+b+c+d+e)/10 5600.82
say 5601.00
9.26 B Sandy material
a) Labour
Mate day 0.28 370.00 103.60
Mazdoor for filling, watering, ramming etc. day 7.00 300.00 2100.00
b) Material
Sand cum 12.00 850.00 10200.00
c) Machinery
Plate compactor/power rammer hour 2.50 569.00 1422.50
Water Tanker hour 0.06 967.00 58.02
d) Overhead charges @ 18% on 2499.14
(a+b+c)
e) Contractor's profit @ 10% on 1638.33
(a+b+c+d)
Cost for 10 cum of sandy backfill = a+b+c+d+e 18021.59
Rate per cum = (a+b+c+d+e)/10 1802.16
say 1802.00
9.27 710.1.4.of Providing and laying of Filter media with granular
IRC:78 materials/stone crushed aggregates satisfying the
and requirements laid down in clause 2504.2.2. of MoRTH
2504.2 specifications to a thickness of not less than 600 mm
with smaller size towards the soil and bigger size
towards the wall and provided over the entire surface
behind abutment, wing wall and return wall to the full
height compacted to a firm condition complete as per
drawing and Technical Specification.
Unit = cum
Taking output = 10 cum.
a) Labour
Mate day 0.32 370.00 118.40
Mazdoor for filling, watering, ramming etc. day 7.00 300.00 2100.00
Mazdoor (Skilled) day 1.00 310.00 310.00
b) Material
Filter media of stone aggregate conforming to cum 12.00 3007.48 36089.81
clause 2504.2.2. of MoRTH specifications.
c) Machinery
Water Tanker of 6 KL capacity hour 0.06 967.00 58.02
d) Overhead charges @ 18% on 6961.72
(a+b+c)
e) Contractor's profit @ 10% on 4563.79
(a+b+c+d)
cost for 10 cum of Fiter Media = a+b+c+d+e 50201.74
Rate per cum = (a+b+c+d+e)/10 5020.17
5020.00
Page 37 of 425
CHAPTER-14
SUPER-STRUCTURE
Amount
Reference to Quantity
Rate (Rs.) Remarks/ Input
Sr No MORT&H Description Unit For Small (Rs.) Small Project ref.
Specification Project
15.13 1600 Supplying, fitting and placing HYSD bar reinforcement
in super-structure complete as per drawing and
technical specifications
Unit = MT
Taking output = 8
a) Material
MS bars including 5 per cent overlaps and wastage tonne 8.40 75943.00 637921.20 M-083
Unit = 1 cum
Taking output = 1 cum
Material
Case I PCC Grade M15 using batching plant & Concrete pump
Concrete, Rate as per item No. 12.8 (A) excluding cum 10304.34 Item No. - 12.8
formworks A
Concrete, Rate as per item No. 12.8 (A) excluding 10313.07 Item No. - 12.8
formworks A
Concrete, Rate as per item No. 12.8 (A) excluding 1.00 10343.57 10343.57 Item No. - 12.8
formworks A
Concrete, Rate as per item No. 12.8 (A) excluding cum 10545.98 Item No. - 12.8
formworks A
Concrete, Rate as per item No. 12.8 (A) excluding 10554.71 Item No. - 12.8
formworks A
Concrete, Rate as per item No. 12.8 (A) excluding 1.00 10585.21 10585.21 Item No. - 12.8
formworks A
Unit = 1 cum
Taking output = 1 cum
a) Material
Cement concreteM30 Grade Refer relevant item of cum 1.00 8649.00 8649.00 Item No. - 12.8
concrete in item 12.8(G)by using batching plant, G
excluding formwork i.e. per cum basic cost (a+b+c)
(Excluding OH & CP)
( Refer relevant item of concrete in item No. 13.8 172.98
(G) except that form work may be added at the rate
of 2 per cent of cost against 3.5 per cent provided
in the foundation concrete.
HYSD bar reinforcement Rate as per item No tonne 0.05 10302.50 515.13 Item No. - 15.13
14.2(Excluding OH & CP)
b) Overhead charges @ 18% on (a) 1680.68
CHAPTER-14
SUPER-STRUCTURE
Amount
Reference to Quantity
Rate (Rs.) Remarks/ Input
Sr No MORT&H Description Unit For Small (Rs.) Small Project ref.
Specification Project
c) Contractor's profit @ 10% on 1101.78
(a+b)
Rate per cum (a+b+c) 12119.56
Add Royality (per cum)
Aggregate cum 0.90 160.00 144.00
Coarse Sand cum 0.45 65.00 29.25
Rate per cum (including royalty) say 12292.81
Note The grade of reinforced cement concrete may be
adopted as M30 for severe conditions and M25 for
moderate conditions.
CHAPTER-14
SUPER-STRUCTURE
Amount
Reference to Quantity
Rate (Rs.) Remarks/ Input
Sr No MORT&H Description Unit For Small (Rs.) Small Project ref.
Specification Project
14.16 800 Painting on concrete surface
Providing and applying 2 coats of water based cement
paint to unplastered concrete surface after cleaning the
surface of dirt, dust, oil, grease, efflorescence and
applying paint @ of 1 litre for 2 sqm.
Unit = sqm
Taking output = 10 sqm
a) Labour
Mate day 0.01 370.00 3.70 L-12
Painter day 0.25 400.00 100.00 L-18
Mazdoor (Skilled) day 0.25 360.00 90.00 L-15
b) Material
Water based paint of approved quality for cement Litres 5.00 250.00 1250.00 M-192
concrete surface
c) Overhead charges @ 18% on 259.87
(a+b)
d) Contractor's profit @ 10% on 170.36
(a+b+c)
Cost for 10 sqm (a+b+c+d) 1873.92
Rate per sqm (a+b+c+d)/10 187.39
say 187.00
CHAPTER-14
SUPER-STRUCTURE
Amount
Reference to Quantity
Rate (Rs.) Remarks/ Input
Sr No MORT&H Description Unit For Small (Rs.) Small Project ref.
Specification Project
14.21 2607 Strip Seal Expansion Joint
Providing and laying of a strip seal expansion joint
catering to maximum horizontal movement upto 70
mm, complete as per approved drawings and standard
specifications to be installed by the
manufacturer/supplier or their authorised
representative ensuring compliance to the
manufacturer's instructions for installation.
Unit = cum
Taking output = 30
a) Material
Per Cum Basic Cost (Rate as in sub-analysis) cum 30.00 8145.17 244355.15 Sub-Analysis of
Concrete - 19.07
Unit = 1 cum
Taking output = 1 cum
a) Material
Cement concrete M30 Grade Refer relevant item of cum 1.00 8614.00 8614.00 Item No. - 15.12
concrete in Item 15.12 excluding formwork C
HYSD bar reinforcement Rate as per item No tonne 0.075 82420.00 6181.50 Item No. - 15.13
15.13(Excluding OH & CP)
b) Labour
Mazdoor for cleaning deck slab concrete surface. day 0.15 330.00 49.50 L-13
c) Overhead charges @ 12% on 1781.40
(a+b)
d) Contractor's profit @ 10% on 1662.64
(a+b+c+d)
Rate per cum (a+b+c+d) 18289.04
Add Royality (per cum)
Aggregate cum 160.00 160.00
Coarse Sand cum 100.00 100.00
Rate per cum (including royalty) say 18549.04
CHAPTER-14
SUPER-STRUCTURE
Amount
Reference to Quantity
Rate (Rs.) Remarks/ Input
Sr No MORT&H Description Unit For Small (Rs.) Small Project ref.
Specification Project
e) Overhead charges @ 18% on 227324.66
(a+b+c+d)
f) Contractor's profit @ 10% on 149023.95
(a+b+c+d+e)
Cost for 120 cum = a+b+c+d+e+f 1639263.41
Rate per cum = (a+b+c+d+e+f)/120 13660.53
say 13661.00
14.1D (ii) (q) Height 5m to 10m
Unit = cum
Taking output = 120 cum 120
a) Material
Per Cum Basic Cost (Rate as in sub-analysis) cum 120.00 8575.44 1029053.02 Sub-Analysis of
Concrete - 19.12
I Ordinary soil
Unit = cum
Taking output = 10 cum
A Manual Means
(i) Depth upto 3 m
a) Labour
Mate day 0.14 335.00 46.90 L-12
Mazdoor day 3.50 325.00 1137.50 L-13
Per Cum Basic Cost of Labour, Material & Machinery 118.44
(a+b+c)
b) Overhead charges @ 20% on (a) 236.88
Page 2 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
Note 1. Cost of dewatering upto 10 per cent of (a+b)
may be added, where required. Assessment for
dewatering shall be made as per site conditions..
2.Labour provided for excavation by mechanical
means includes that required for trimming of bottom
and side slopes.
12.1 II Ordinary Rock (not requiring blasting)
A Manual Means
(i) Depth upto 3 m
Unit = cum
Taking output = 10 cum
a) Labour
Mate day 0.20 335.00 67.00 L-12
Mazdoor day 5.00 325.00 1625.00 L-13
b) Overhead charges @ 20% on (a) 338.40
c) Contractor's profit @ 10% on (a+b) 203.04
Cost for 10 cum = a+b+c 2233.44
Rate per cum = (a+b+c)/10 223.34
say 223.34
Note Cost of dewatering upto 10 per cent of labour cost
may be added, where required. Assessment for
dewatering shall be made as per site conditions..
A Manual Means
Unit = cum
Taking output = 120
a) Labour
Mate day 0.210 335.00 70.35 L-12
Mazdoor day 3.000 325.00 975.00 L-13
Driller day 2.000 325.00 650.00 L-06
Blaster day 0.250 325.00 81.25 L-03
b) Machinery
Air compressor hour 6.000 585.00 3510.00 P&M-15001
Jack Hammer for drilling holes (@ 4.5 m per hour) hour 24.000 11.00 264.00
P&M-45001
Page 3 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
Jack Hammer (consider 5% of the volume for hour 1.280 206.00 263.68
P&M-4001
dressing)
Hydraulic Excavator
Excavator for excavation
(i) 1.2 cum bucket capacity hour 3293.00 P&M-3003
(ii) 1.1 cum bucket capacity hour 2965.00 P&M-3004
(iii) 0.9 cum bucket capacity hour 1.280 2689.00 3441.92 P&M-3005
For loading
(i) 1.2 cum bucket capacity hour 3293.00 P&M-3003
(ii) 1.1 cum bucket capacity hour 2965.00 P&M-3004
(iii) 0.9 cum bucket capacity hour 3.371 2689.00 9065.14 P&M-3005
Tipper
For transportation considering lead @ 1 km
(i) 18 cum capacity t-km 7.160 P&M-72002
(ii) 14 cum capacity t-km 8.120 P&M-73002
(iii) 10 cum capacity t-km 180.000 10.030 1805.40 P&M-74002
For loading & unloading time
(i) 18 cum capacity hour 2746.000 P&M-6001
(ii) 14 cum capacity hour 2435.000 P&M-6002
(iii) 10 cum capacity hour 3.371 2166.000 7302.00 P&M-6003
c) Materials
Small dia.Explosive at 0.40 kg / cum for 120 cum kg 49.200 55.00 2706.00 M-215
( 120 x 0.40 )Explosive at 0.20 kg / cum for
secondary blast @ 5%of the total volume ( 120 x
0.2x5% )
Electric detonators at 1 per hole for main blast no 69.000 12.00 828.00 M-217
holes (21x3+20*2)=103 nos
Ordinary detonators @ 1 per hole for 10 no 7.000 55.00 385.00 M-216
secondary holes( required for 5% of the total
quantity @ 0.6 m per hole for I cum )
Detonating fuse coil m 213.000 105.00 22365.00 M-218
d) Overhead charges @ 20% on 10742.55
(a+b+c)
e) Contractor's profit @ 10% on 6445.53
(a+b+c+d)
Cost for 120 cum = a+b+c+d+e 70900.82
Rate per cum = (a+b+c+d+e)/120 590.84
say 590.84
Note Cost of dewatering @ 10 per cent of (a+b) may
be added, where required Assessment for
dewatering shall be made as per site conditions.
12.1 IV Hard Rock ( blasting prohibited )
Unit = cum
Taking output = 35
A Mechanical Means
a) Labour
Mate day 0.080 335.00 26.80 L-12
Mazdoor day 2.000 325.00 650.00 L-13
b) Machinery
Jack Hammer hour 7.467 206.00 1538.13 P&M-4001
Hydraulic Excavator
Excavator for excavation
(i) 1.2 cum bucket capacity hour 3293.00 P&M-3003
(ii) 1.1 cum bucket capacity hour 2965.00 P&M-3004
(iii) 0.9 cum bucket capacity hour 7.467 2689.00 20077.87 P&M-3005
For loading
(i) 1.2 cum bucket capacity hour 3293.00 P&M-3003
(ii) 1.1 cum bucket capacity hour 2965.00 P&M-3004
(iii) 0.9 cum bucket capacity hour 0.983 2689.00 2644.00 P&M-3005
Tipper
For transportation to dumping yard considering
lead @ 1km
(i) 18 cum capacity t-km 7.160 P&M-72002
(ii) 14 cum capacity t-km 8.120 P&M-73002
(iii) 10 cum capacity t-km 52.500 10.030 526.57 P&M-74002
For loading & unloading time
(i) 18 cum capacity hour 2746.000 P&M-6001
(ii) 14 cum capacity hour 2435.000 P&M-6002
(iii) 10 cum capacity hour 0.983 2166.000 2129.75 P&M-6003
Unit : Cum
Taking Output : 6 cum
a) Labour
Mate day 0.12 335.00 40.20 L-12
Mazdoor for dressing sides, bottom and backfilling day 3.00 325.00 975.00
L-13
b) Machinery
Tractor-trolley for transportation hour 2.00 873.00 1746.00 P&M-12001
c) Overhead charges @ 20% on 552.24
(a+b)
d) Contractor's profit @ 10% on 331.34
(a+b+c)
Cost for 6 cum = a+b+c+d 3644.78
Rate per cum = (a+b+c+d)/6 607.46
say 607.46
12.2 304 Filling Annular Space Around Footing in Rock
Unit = cum
Page 5 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
Taking out put = 1 cum
Lean cement concrete 1:3:6 nominal mix. Rate may
be taken as per item 12.4.
12.3 304 Sand Filling in Foundation Trenches as per Drawing
& Technical Specification
Unit = cum
Taking output = 100
a) Labour
Mate day 0.04 335.00 13.40 L-12
Mazdoor day 1.00 325.00 325.00 L-13
b) Machinery
Water tanker (speed @ 20km/hr and return speed
@ 30 km/hr and spreading @ 30 mins per trip )
Page 6 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
Mason day 1.00 470.00 470.00 L-11
Mazdoor day 7.00 325.00 2275.00 L-13
b) Material
Plain cement concrete 1:3:6 nominal mix using cum 15.00 4596.80 68952.01 Sub-Analysis of
batching plant (Rate as sub-analysis) Concrete - 19.02
Water KL 3.24 60.00 194.40 M-191
c) Machinery
Plate Compactor hour 1.00 569.00 569.00 P&M-46001
Water tanker (speed @ 20km/hr and return speed
@ 30 km/hr and spreading @ 30 mins per trip )
Page 7 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
a) Material
Stone cum 5.50 475.66 2616.10 M-170 7.79
Through and bond stone each 35.00 25.00 875.00 M-184 1.558
(35no.x0.24mx0.24mx0.39m = 0.79 cu.m)
Cement mortar 1:3 (Rate as sub-analysis) cum 1.50 4663.75 6995.63
Sub-Analysis of
Concrete - 19.01 (A)
b) Labour
Mate day 0.66 335.00 221.10 L-12
Mason day 7.50 470.00 3525.00 L-11
Mazdoor day 9.00 325.00 2925.00 L-13
c) Overhead charges @ 20% on 3431.57
(a+b)
d) Contractor's profit @ 10% on 2058.94
(a+b+c)
Cost for 5 cum = a+b+c+d 22648.34
Rate per cum (a+b+c+d)/5 4529.67
say 4529.67
(B) Random Rubble Masonry
( coursed/uncoursed )
Unit = cum
Taking output = 5
a) Material
Stone cum 5.50 475.66 2616.10 M-147
Through and bond stone each 35.00 25.00 875.00 M-184
(35nos.x0.24mx0.24mx0.39m = 0.79 cu.m)
Cement mortar 1:3 (Rate as in sub-analysis) cum 1.55 4663.75 7228.82
Sub-Analysis of
Concrete - 19.01 (A)
b) Labour
Mate day 0.62 335.00 207.70 L-12
Mason day 6.00 470.00 2820.00 L-11
Mazdoor day 9.00 325.00 2925.00 L-13
c) Overhead charges @ 20% on 3334.52
(a+b)
d) Contractor's profit @ 10% on 2000.71
(a+b+c)
Cost for 5 cum = a+b+c+d 22007.86
Rate per cum (a+b+c+d)/5 4401.57
say 4401.57
Note The labour already considered in cement mortar has
been taken into account while proposing labour for
masonry works.
Page 8 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
12.8 1500, Plain/Reinforced Cement Concrete in Open
1700 & Foundation complete as per Drawing and Technical
2100 Specifications.
A PCC Grade M15
Case I PCC Grade M15 using batching plant & Concrete
pump
Unit = cum
Taking output = 30
a) Material
Per Cum Basic Cost (Rate as in sub-analysis) cum 30.000 4799.42 143982.65 Sub-Analysis of
Concrete - 19.03
Water for curing Kl 15.750 60.00 945.00 M-191
b) Labour
For pouring and placing
Mate day 0.16 370.00 57.56 L-12
Mason day 1.50 480.00 720.00 L-11
Mazdoor day 2.39 330.00 788.33 L-13
c) Machinery
Transit truck agitator
For transportation (6 cum Capacity) tonne-km 75 x L1 12.78 1917.00 P&M-76001 75
For unloading hour 0.69 2299.00 1596.53 P&M-34001
Hydraulic Boom placer pump hour 0.69 4192.00 2911.11 P&M-36001
Water tanker ( speed @ 20km/hr and return
speed @ 30 km/hr and 30 mins for unloading )
(i) 16 KL capacity hour 1440.00 P&M-11001
(ii) 12 KL capacity hour 1270.00 P&M-11002
(iii) 6 KL capacity hour 2.33 967.00 2256.33 P&M-11003
Per Cum Basic Cost of Labour, Material & Machinery 5173.00
(a+b+c)
d) Formwork @ 4 per cent on cost of concrete i.e. 6206.98
cost of material, labour and machinery
Page 9 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
Per Cum Basic Cost (Rate as in sub-analysis) cum 30.00 5290.98 158729.33 Sub-Analysis of
Concrete - 19.04
Water for curing Kl 15.75 60.00 945.00 M-191
b) Labour
For pouring and placing
Mate day 0.16 335.00 52.11 L-12
Mason day 1.50 470.00 705.00 L-11
Mazdoor day 2.39 325.00 776.39 L-13
c) Machinery
Transit truck agitator
For transportation (6 cum Capacity) tonne-km 75 x L1 12.78 1917.00 P&M-76001 0
For unloading hour 0.69 2299.00 1596.53 P&M-34001
Hydraulic Boom placer pump hour 0.69 4192.00 2911.11 P&M-36001
Water tanker ( speed @ 20km/hr and return
speed @ 30 km/hr and 30 mins for unloading )
(i) 16 KL capacity hour 1440.00 P&M-11001
(ii) 12 KL capacity hour 1270.00 P&M-11002
(iii) 6 KL capacity hour 2.33 967.00 2256.33 P&M-11003
Per Cum Basic Cost of Labour, Material & Machinery 5663.00
(a+b+c)
d) Formwork @ 4 per cent on cost of concrete i.e. 6795.55
cost of material, labour and machinery
Page 11 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
d) Formwork @ 4 per cent on cost of concrete i.e. 7230.70
cost of material, labour and machinery
Page 12 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
say 8460.84
Case II RCC Grade M25 using batching plant transit mixer &
manual placing
Unit = cum
Taking output = 15
a) Material
Per Cum Basic Cost (Rate as in sub-analysis) cum 15.00 5779.94 86699.09 Sub-Analysis of
Concrete - 19.07
Water for curing Kl 7.88 60.00 472.50 M-191
b) Labour
For pouring and placing
Mate day 0.42 335.00 140.70 L-12
Mason day 1.50 470.00 705.00 L-11
Mazdoor day 9.00 325.00 2925.00 L-13
c) Machinery
Transit truck agitator
For transportation (6 cum Capacity) tonne-km 37.5 x L1 12.78 958.50 P&M-76001
For unloading hour 0.83 2299.00 1915.83 P&M-34001
Water tanker ( speed @ 20km/hr and return
speed @ 30 km/hr and 30 mins for unloading )
(i) 16 KL capacity hour 1440.00 P&M-11001
(ii) 12 KL capacity hour 1270.00 P&M-11002
(iii) 6 KL capacity hour 1.17 967.00 1128.17 P&M-11003
Per Cum Basic Cost of Labour, Material & Machinery 6330.00
(a+b+c)
d) Formwork @ 4 per cent on cost of concrete i.e. 3797.79
cost of material, labour and machinery
Page 16 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
b) Labour
For pouring and placing
Mate day 0.20 335.00 65.51 L-12
Mason day 1.50 470.00 705.00 L-11
Mazdoor day 3.39 325.00 1101.39 L-13
c) Machinery
Transit truck agitator
For transportation (6 cum Capacity) tonne-km 75 x L1 12.78 1917.00 P&M-76001 0
For unloading hour 0.69 2299.00 1596.53 P&M-34001
Hydraulic Boom placer pump hour 0.69 4192.00 2911.11 P&M-36001
Water tanker ( speed @ 20km/hr and return
speed @ 30 km/hr and 30 mins for unloading )
(i) 16 KL capacity hour 1440.00 P&M-11001
(ii) 12 KL capacity hour 1270.00 P&M-11002
(iii) 6 KL capacity hour 2.33 967.00 2256.33 P&M-11003
Per Cum Basic Cost of Labour, Material & Machinery 6426.00
(a+b+c)
d) Formwork @ 4 per cent on cost of concrete i.e. 7710.72
cost of material, labour and machinery
Page 17 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
d) Overhead charges @ 20% on (a+b+c) 50024.37
e) Contractor's profit @ 10% on (a+b+c+d) 30014.62
Rate per No. (a+b+c+d+e) 330160.84
say 330160.84
Note It is assumed that earth will be available within the
working space of crane with grab bucket.
12.9 B Assuming depth of water 4.0 m and height of island
4.5 m.
Unit = 1No
Taking output = 1 No
a) Material
Earth (compacted) cum 1356.00 45.00 61020.00 M-093
Sand bags each 9000.00 28.00 252000.00 M-160
Wooden ballies 8" Dia and 9 m long each 143.00 150.00 21450.00 M-196
Wooden ballies 2" Dia for bracing metre 285.00 5.00 1425.00 M-195
b) Labour
Mate day 8.40 335.00 2814.00 L-12
Mazdoor for piling 8" dia ballies for piling 8" dia day 27.00 325.00 8775.00
L-13
ballies
Mazdoor for bracing with 2" dia ballies day 18.00 325.00 5850.00 L-13
Mazdoor for filling sand bags, stitching and day 165.00 325.00 53625.00
L-13
placing
c) Machinery
Crane with grab 1 cum capacity hour 75.00 6029.00 452175.00 P&M-62001
Consumables and other arrangements for piling 21478.35
ballies @ 2.5 per cent of (a+b+c).
d) Overhead charges @ 20% on 176122.47
(a+b+c)
e) Contractor's profit @ 10% on 105673.48
(a+b+c+d)
Rate per No. (a+b+c+d+e) 1162408.30
say 1162408.30
Note For other well diameters rate can be worked out on
the basis of cross-sectional area of well. The
diameter of the island shall be in the conformity with
clause 1203.4 of MoRTH specifications.
12.9 C Providing and constructing one span service road to
reach island location from one pier location to
another pier location
Assuming span length 30 m, width of service road 10
m and depth of water 1 m
Unit = 1 meter
Taking output = 30
a) Material
Earth cum 450.00 45.00 20250.00 M-093
Sand bags each 300.00 28.00 8400.00 M-160
b) Labour
Mate day 0.24 335.00 80.40 L-12
Mazdoor for filling sand bags, stitching and day 6.00 325.00 1950.00
L-13
placing
c) Machinery
Front end Loader 1 cum capacity hour 27.00 1717.00 46359.00 P&M-5003
Tipper 5.5 cum capacity hour 28.00 1649.00 46172.00 P&M-6004
d) Overhead charges @ 20% on 24642.28
(a+b+c)
e) Contractor's profit @ 10% on 14785.37
(a+b+c+d)
Cost for 30 m (a+b+c+d+e) 162639.05
Rate per m (a+b+c+d+e)/30 5421.30
say 5421.30
12.10 1200 & Providing and Laying Cutting Edge of Mild Steel
1900 weighing 40 kg per metre for Well Foundation
complete as per Drawing and Technical
Specification.
Unit = 1 MT
Taking output = 1.0
a) Material
Structural steel in plates, angles, etc including 5 tonne 1.05 65000.00 68250.00
M-181
per cent wastage
Nuts & bolts Kg 20.00 50.00 1000.00 M-129
b) Machinery
Hydra Crane of capacity 10T for lifting shifting hour 8.00 1181.00 9448.00 P&M-63003
Tipper for Transportation to site
(i) 18 cum capacity t.km 7.160 P&M-72002
(ii) 14 cum capacity t.km 8.120 P&M-73002
(iii) 10 cum capacity t.km 1.05 x L1 10.030 21.06 P&M-74002
c) Labour
(for cutting, bending, making holes, joining, welding
and erecting in position)
Mate day 1.08 335.00 361.80 L-12
Fitter day 4.50 400.00 1800.00 L-08
Blacksmith day 4.50 435.00 1957.50 L-02
Page 18 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
Welder day 4.50 435.00 1957.50 L-02
Mazdoor day 13.50 325.00 4387.50 L-13
Electrodes, cutting gas and other consumables @ 10 6925.00
per cent of cost of (a) above
d) Overhead charges @ 20% on 19221.67
(a+b+c)
e) Contractor's profit @ 10% on 11533.00
(a+b+c+d)
Rate per MT (a+b+c+d) 126863.04
say 126863.04
12.11 1200, Plain/Reinforced Cement Concrete, in Well
1500 & Foundation complete as per Drawing and Technical
1700 Specification.
A Well curb
(i) RCC M20 Grade
12.11 A Case I RCC Grade M20 using batching plant & Concrete
(i) pump
Unit = cum
Taking output = 30
a) Material
Per Cum Basic Cost (Rate as in sub-analysis) cum 30.00 5394.44 161833.11 Sub-Analysis of
Concrete - 19.05
b) Labour
For pouring and placing
Mate day 0.14 335.00 45.41 L-12
Mason day 1.00 470.00 470.00 L-11
Mazdoor day 2.39 325.00 776.39 L-13
c) Machinery
Transit truck agitator
For transportation (6 cum Capacity) tonne-km 75 x L1 12.78 1917.00 P&M-76001 0
For unloading hour 0.69 2299.00 1596.53 P&M-34001
Hydraulic Boom placer pump hour 0.69 4192.00 2911.11 P&M-36001
d) Formwork @ 20 per cent on cost of concrete 33909.91
i.e. cost of material, labour and machinery
Page 19 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
Mazdoor day 2.39 325.00 776.39 L-13
c) Machinery
Transit truck agitator
For transportation (6 cum Capacity) tonne-km 75 x L1 12.78 1917.00 P&M-76001 0
For unloading hour 0.69 2299.00 1596.53 P&M-34001
Hydraulic Boom placer pump hour 0.69 4192.00 2911.11 P&M-36001
d) Formwork @ 20 per cent on cost of concrete 36222.92
i.e. cost of material, labour and machinery
Page 20 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
For pouring and placing
Mate day 0.36 335.00 120.60 L-12
Mason day 1.00 470.00 470.00 L-11
Mazdoor day 8.00 325.00 2600.00 L-13
c) Machinery
Transit truck agitator
For transportation (6 cum Capacity) tonne-km 37.5 x L1 12.78 958.50 P&M-76001
For unloading hour 0.83 2299.00 1915.83 P&M-34001
d) Formwork @ 20 per cent on cost of concrete 18652.33
i.e. cost of material, labour and machinery
Page 21 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
12.11 A Case I RCC Grade M40 using batching plant & Concrete
(v) pump
Unit = cum
Taking output = 30
a) Material
Per Cum Basic Cost (Rate as in sub-analysis) cum 30.00 6020.84 180625.25 Sub-Analysis of
Concrete - 19.12
b) Labour
For pouring and placing
Mate day 0.14 335.00 45.41 L-12
Mason day 1.00 470.00 470.00 L-11
Mazdoor day 2.39 325.00 776.39 L-13
c) Machinery
Transit truck agitator
For transportation (6 cum Capacity) tonne-km 75 x L1 12.78 1917.00 P&M-76001 0
For unloading hour 0.69 2299.00 1596.53 P&M-34001
Hydraulic Boom placer pump hour 0.69 4192.00 2911.11 P&M-36001
d) Formwork @ 20 per cent on cost of concrete 37668.34
i.e. cost of material, labour and machinery
Page 22 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
f) Contractor's profit @ 10% on 20024.28
(a+b+c+d+e)
Cost for 30 cum = a+b+c+d+e+f 220267.08
Rate per cum = (a+b+c+d+e+f)/30 7342.24
say 7342.24
12.11 B Case II PCC Grade M15 using batching plant & manual
(i) placing
Unit = cum
Taking output = 15
a) Material
Per Cum Basic Cost (Rate as in sub-analysis) cum 15.00 71991.33 Sub-Analysis of
4799.42
Concrete - 19.03
b) Labour
For pouring and placing
Mate day 0.36 335.00 120.60 L-12
Mason day 1.00 470.00 470.00 L-11
Mazdoor day 8.00 325.00 2600.00 L-13
c) Machinery
Transit truck agitator
For transportation (6 cum Capacity) tonne-km 37.5 x L1 12.78 958.50 P&M-76001
For unloading hour 0.83 2299.00 1915.83 P&M-34001
d) Formwork @ 10 per cent on cost of concrete 7805.63
i.e. cost of material, labour and machinery
Page 23 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
e) Overhead charges @ 20% on 18794.51
(a+b+c+d)
f) Contractor's profit @ 10% on 11276.71
(a+b+c+d+e)
Cost for 15 cum = a+b+c+d+e+f 124043.78
Rate per cum = (a+b+c+d+e+f)/15 8269.59
say 8269.59
12.11 B (iii) RCC M20 Grade
12.11 B Case I RCC Grade M20 using batching plant & Concrete
(iii) pump
Unit = cum
Taking output = 30
a) Material
Per Cum Basic Cost (Rate as in sub-analysis) 161833.11 Sub-Analysis of
cum 30.00 5394.44
Concrete - 19.05
b) Labour
For pouring and placing
Mate day 0.14 335.00 45.41 L-12
Mason day 1.00 470.00 470.00 L-11
Mazdoor day 2.39 325.00 776.39 L-13
c) Machinery
Transit truck agitator
For transportation (6 cum Capacity) tonne-km 75 x L1 12.78 1917.00 P&M-76001 0
For unloading hour 0.69 2299.00 1596.53 P&M-34001
Hydraulic Boom placer pump hour 0.69 4192.00 2911.11 P&M-36001
d) Formwork @ 10 per cent on cost of concrete 16954.95
i.e. cost of material, labour and machinery
Page 24 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
d) Formwork @ 10 per cent on cost of concrete 17732.45
i.e. cost of material, labour and machinery
Page 25 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
For unloading hour 0.83 2299.00 1915.83 P&M-34001
d) Formwork @ 10 per cent on cost of concrete 9276.40
i.e. cost of material, labour and machinery
Page 26 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
Transit truck agitator
For transportation (6 cum Capacity) tonne-km 75 x L1 12.78 1917.00 P&M-76001 0
For unloading hour 0.69 2299.00 1596.53 P&M-34001
Hydraulic Boom placer pump hour 0.69 4192.00 2911.11 P&M-36001
d) Formwork @ 10 per cent on cost of concrete 18210.99
i.e. cost of material, labour and machinery
Page 27 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
Mazdoor day 8.00 325.00 2600.00 L-13
c) Machinery
Transit truck agitator
For transportation (6 cum Capacity) tonne-km 37.5 x L1 12.78 958.50 P&M-76001
For unloading hour 0.83 2299.00 1915.83 P&M-34001
d) Formwork @ 10 per cent on cost of concrete 9493.77
i.e. cost of material, labour and machinery
Page 28 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
For pouring and placing
Mate day 0.14 335.00 45.41 L-12
Mason day 1.00 470.00 470.00 L-11
Mazdoor day 2.39 325.00 776.39 L-13
c) Machinery
Transit truck agitator
For transportation (6 cum Capacity) tonne-km 75 x L1 12.78 1917.00 P&M-76001 0
For unloading hour 0.69 2299.00 1596.53 P&M-34001
Hydraulic Boom placer pump hour 0.69 4192.00 2911.11 P&M-36001
Hydra Crane for holding tremie pipe hour 0.69 1032.00 716.67 P&M-63001
Per Cum Basic Cost of Labour, Material & Machinery 5573.00
(a+b+c)
Add 5 per cent of cost of material and labour 8358.12
towards cost of forming sump, protective bunds,
chiselling and making arrangements for under water
concreting with tremie pipe..
Page 29 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
d) Overhead charges @ 20% on 37388.65
(a+b+c)
e) Contractor's profit @ 10% on 22433.19
(a+b+c+d)
Cost for 30 cum = a+b+c+d+e 246765.11
Rate per cum = (a+b+c+d+e)/30 8225.50
say 8225.50
Case II PCC Grade M25 using batching plant & manual
placing
Unit = cum
Taking output = 15
a) Material
Per Cum Basic Cost (Rate as in sub-analysis) cum 15.00 5653.60 84804.05 Sub-Analysis of
Concrete - 19.06
b) Labour
For pouring and placing
Mate day 0.36 335.00 120.60 L-12
Mason day 1.00 470.00 470.00 L-11
Mazdoor day 8.00 325.00 2600.00 L-13
c) Machinery
Transit truck agitator
For transportation (6 cum Capacity) tonne-km 37.5 x L1 12.78 958.50 P&M-76001 0
For unloading hour 0.83 2299.00 1915.83 P&M-34001
Hydra Crane for holding tremie pipe hour 0.83 1032.00 860.00 P&M-63001
Per Cum Basic Cost of Labour, Material & Machinery 6116.00
(a+b+c)
Add 5 per cent of cost of material and labour 4586.45
towards cost of forming sump, protective bunds,
chiselling and making arrangements for under water
concreting with tremie pipe..
Page 30 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
Mazdoor day 8.00 325.00 2600.00 L-13
c) Machinery
Transit truck agitator
For transportation (6 cum Capacity) tonne-km 37.5 x L1 12.78 958.50 P&M-76001 0
For unloading hour 0.83 2299.00 1915.83 P&M-34001
Hydra Crane for holding tremie pipe hour 0.83 1032.00 860.00 P&M-63001
Per Cum Basic Cost of Labour, Material & Machinery 6151.00
(a+b+c)
Add 5 per cent of cost of material and labour 4612.95
towards cost of forming sump, protective bunds,
chiselling and making arrangements for under water
concreting with tremie pipe..
Page 35 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
f) Contractor's profit @ 10% on 23157.00
(a+b+c+d+e)
Cost for 30 cum = a+b+c+d+e+f 254727.05
Rate per cum = (a+b+c+d+e+f)/30 8490.90
say 8490.90
12.11 F Case II RCC Grade M30 using batching plant transit mixer &
(iii) manual placing
Unit = cum
Taking output = 15
a) Material
Per Cum Basic Cost (Rate as in sub-analysis) cum 15.00 5813.12 87196.73 Sub-Analysis of
Concrete - 19.09
Water for curing Kl 7.88 60.00 472.50 M-191
b) Labour
For pouring and placing
Mate day 0.38 335.00 127.30 L-12
Mason day 1.50 470.00 705.00 L-11
Mazdoor day 8.00 325.00 2600.00 L-13
c) Machinery
Transit truck agitator
For transportation (6 cum Capacity) tonne-km 37.5 x L1 12.78 958.50 P&M-76001 0
For unloading hour 0.83 2299.00 1915.83 P&M-34001
Water tanker ( speed @ 20km/hr and return
speed @ 30 km/hr and 30 mins for unloading )
(i) 16 KL capacity hour 1440.00 P&M-11001
(ii) 12 KL capacity hour 1270.00 P&M-11002
(iii) 6 KL capacity hour 1.17 967.00 1128.17 P&M-11003
d) Formwork @ 4 per cent on cost of concrete i.e. 3804.16
cost of material, labour and machinery
Page 37 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
Page 38 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
12.12 Section Sinking of 6 m external diameter well (other than
1200 pneumatic method of sinking) through all types of
strata namely sandy soil, clayey soil and rock as
shown against each case, complete as per drawing
and technical specifications. Depth of sinking is
reckoned from bed level.
Page 39 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
b Add 20 per cent of cost for Kentledge including 20% for
supports, loading arrangement and Labour. Kentledge
31st m 10% 23012.00 4602.00
32nd 10% 25313.00 5063.00
33rd m 10% 27844.00 5569.00
34th m 10% 30628.00 6126.00
35th m 10% 33691.00 6738.00
36th m 10% 37060.00 7412.00
37th m 10% 40766.00 8153.00
38th m 10% 44843.00 8969.00
39th m 10% 49327.00 9865.00
40th m 10% 54260.00 10852.00
Total Cost from 30m upto 40m 366744.00 73349.00
Avg Rate per metre 36674.40 7334.90
12.12 B Clayey Soil ( 6m dia. Well )
Unit = Running Meter.
Taking output = 1 meter
(i) Depth below bed level upto 3.0 M
Rate of sinking = 0.33 m per hour.
a) Labour
Mate day 0.15 335.00 50.25 L-12
Sinker ( skilled ) day 1.50 335.00 502.50 L-15
Sinking helper ( semi-skilled ) day 2.25 325.00 731.25 L-14
b) Machinery
Hire & running charges of crane with grab bucket hour 3.00 1042.00 3126.00
P&M-67001
of 0.75 cum capacity and accessories
Consumables in sinking @ 10 per cent of (b) 312.60
c) Overhead charges @ 20% on 944.52
(a+b)
d) Contractor's profit @ 10% on 566.71
(a+b+c)
Rate per metre = (a+b+c+d) 6233.83
say 6233.83
12.12 B (ii) Beyond 3m upto 10m depth
Rate of sinking = 0.17 m per hour.
a) Labour
Mate day 0.30 335.00 100.50 L-12
Sinker day 3.00 335.00 1005.00 L-15
Sinking helper ( semi-skilled ) day 4.50 325.00 1462.50 L-14
b) Machinery
Hire & running charges of crane with grab bucket hour 6.00 1042.00 6252.00
P&M-67001
of 0.75 cum capacity and accessories.
Air compressor with pneumatic chisel attachment hour 2.00 596.00 1192.00 P&M-15001 +P&M-
for cutting hard clay. 45001
Consumables in sinking @ 10 per cent of (b) 744.40
c) Overhead charges @ 20% on 2151.28
(a+b)
d) Contractor's profit @ 10% on 1290.77
(a+b+c)
Rate per metre = (a+b+c+d) 14198.45
say 14198.45
12.12 B (iii) Beyond 10 m upto 20 m
a Add 5 per cent for every additional meter depth of
sinking over the rate of sinking for the previous meter
Page 40 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
23rd m 7.5% 28732.00 5746.00 1437.00
24th m 7.5% 30887.00 6177.00 1544.00
25th m 7.5% 33204.00 6641.00 1660.00
26th m 7.5% 35694.00 7139.00 1785.00
27th m 7.5% 38371.00 7674.00 1919.00
28th m 7.5% 41249.00 8250.00 2062.00
29th m 7.5% 44343.00 8869.00 2217.00
30th m 7.5% 47669.00 9534.00 2383.00
Total Cost from 20m upto 30m 351738.00 70347.00 17586.00
Avg Rate per metre 35173.80 7034.70 1758.60
12.12 B (v) Beyond 30m upto 40 m
a Add 10 per cent for every additional meter depth of
sinking over the rate of sinking for the previous meter
Page 41 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
31st m 10% 52436.00 10487.00 2622.00
32nd 10% 57680.00 11536.00 2884.00
33rd m 10% 63448.00 12690.00 3172.00
34th m 10% 69793.00 13959.00 3490.00
35th m 10% 76772.00 15354.00 3839.00
36th m 10% 84449.00 16890.00 4222.00
37th m 10% 92894.00 18579.00 4645.00
38th m 10% 102183.00 20437.00 5109.00
39th m 10% 112401.00 22480.00 5620.00
40th m 10% 123641.00 24728.00 6182.00
Total Cost from 30m upto 40m 835697.00 167140.00 41785.00
Avg Rate per metre 83569.70 16714.00 4178.50
12.12 C Extra over item no. 12.12 (A) & (B) irrespective of
depth for sinking in Soft Rock (6m dia well )
Unit = Running Meter.
Taking output = 1 m
a) Labour
Mate day 0.49 335.00 164.15 L-12
Sinker ( skilled ) day 1.50 335.00 502.50 L-15
Sinking helper ( semi-skilled ) day 2.25 325.00 731.25 L-14
Diver day 0.50 365.00 182.50 L-07
Mazdoor day 8.00 325.00 2600.00 L-13
b) Machinery
Air Compressor 250 cfm hour 22.619 585.00 13232.388 P&M-15001
Pneumatic breaker hour 45.239 11.00 497.628 P&M-45001
Consumables in sinking @ 5 per cent of (b) 686.50
Add for dewatering @ of 15 per cent of (a+b), if 2789.54
required
c) Overhead charges @ 20% on 4277.29
(a+b)
d) Contractor's profit @ 10% on 2566.37
(a+b+c)
Rate per metre = (a+b+c+d) 28230.12
say 28230.12
12.12 D Extra over item no. 12.12 (A) & (B) irrespective of
depth for sinking in Hard Rock (6m dia well )
Unit = Running Meter
Taking output = 1 m
a) Material
Small dia.Explosive at 0.20 kg / cum kg 5.655 55.00 311.018 M-215
Electric detonators no 25.000 12.00 300.000 M-217
Detonating fuse coil m 78.000 105.00 8190.000 M-218
b) Labour
Mate day 0.50 335.00 167.50 L-12
Sinker ( skilled ) day 1.50 335.00 502.50 L-15
Sinking helper ( semi-skilled ) day 2.25 325.00 731.25 L-14
Diver day 0.50 365.00 182.50 L-07
Driller day 2.00 325.00 650.00 L-06
Page 42 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
Blaster day 0.25 325.00 81.25 L-03
Mazdoor day 6.00 325.00 1950.00 L-13
c) Machinery
Air Compressor 250 cfm hour 23.355 585.00 13662.402 P&M-15001
Pneumatic breaker hour 22.619 11.00 248.814 P&M-45001
Pneumatic breaker for drilling holes (@ 4.5 m per hour 8.090 11.00 88.986
P&M-45001
hour)
Consumables in protected blasting @ 10 per 1400.02
cent of (c)
Add for dewatering @ of 15 per cent of (a+b+c), 4269.94
if required
d) Overhead charges @ 20% on 4787.03
(a+b+c)
e) Contractor's profit @ 10% on 2872.22
(a+b+c+d)
Rate per metre = (a+b+c+d+e) 31594.41
say 31594.41
12.12 E Extra over item no. 12.12 (A) & (B) irrespective of
depth for sinking in rock bouldery strata (6m dia
well )
Unit = Running Meter.
Taking output = 1 m
a) Labour
Mate day 0.41 335.00 137.35 L-12
Sinker ( skilled ) day 1.50 335.00 502.50 L-15
Sinking helper ( semi-skilled ) day 2.25 325.00 731.25 L-14
Diver day 0.50 365.00 182.50 L-07
Mazdoor day 6.00 325.00 1950.00 L-13
b) Machinery
Air Compressor 250 cfm hour 18.850 585.00 11026.990 P&M-15001
Pneumatic breaker hour 37.699 11.00 414.690 P&M-45001
Consumables in sinking @ 5 per cent of (b) 572.08
Add for dewatering @ of 15 per cent of (a+b), if 2327.60
required
c) Overhead charges @ 20% on 3568.99
(a+b)
d) Contractor's profit @ 10% on 2141.40
(a+b+c)
Rate per metre = (a+b+c+d) 23555.36
say 23555.36
12.13 Section Sinking of 7 m external diameter well ( other than
1200 pneumatic method of sinking ) through all types of
strata namely sandy soil, clayey soil and rock as
shown against each case, complete as per drawing
and technical specifications. Depth of sinking is
reckoned from bed level.
Page 46 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
Hire & running charges of crane with grab bucket hour 4.00 1042.00 4168.00
P&M-67001
of 0.75 cum capacity and accessories.
Consumables in sinking @10 per cent of (b) 416.80
c) Overhead charges @ 20% on 1224.52
(a+b)
d) Contractor's profit @ 10% on 734.71
(a+b+c)
Rate per metre = (a+b+c+d) 8081.83
say 8081.83
12.14 A (ii) Beyond 3m upto 10m depth
Rate of sinking @ 0.20 m/hour
a) Labour
Mate day 0.25 335.00 83.75 L-12
Sinker day 1.75 335.00 586.25 L-15
Sinking helper ( semi-skilled ) day 3.50 325.00 1137.50 L-14
b) Machinery
Hire & running charges of crane with grab bucket hour 5.00 1042.00 5210.00
P&M-67001
of 0.75 cum capacity and accessories.
Consumables in sinking @10 per cent of (b) 521.00
c) Overhead charges @ 20% on 1507.70
(a+b)
d) Contractor's profit @ 10% on 904.62
(a+b+c)
Rate per metre = (a+b+c+d) 9950.82
say 9951.00
12.14 A (iii) Beyond 10m upto 20m
a Add 5 per cent for every additional meter depth of
sinking over the rate of sinking for the previous meter
11th m 5% 10448.00
12th m 5% 10970.00
13th m 5% 11519.00
14th m 5% 12095.00
15th m 5% 12700.00
16th m 5% 13335.00
17th m 5% 14002.00
18th m 5% 14702.00
19th m 5% 15437.00
20th m 5% 16209.00
Total Cost from 10m upto 20m 131417.00
Avg Rate per metre 13141.70
12.14 A (iv) Beyond 20m upto 30 m
a Add 7.5 per cent for every additional meter depth of
sinking over the rate of sinking for the previous meter
Page 49 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
Add for dewatering @ of 15 per cent of (a+b), if 3932.25
required
c) Overhead charges @ 20% on 6029.45
(a+b)
d) Contractor's profit @ 10% on 3617.67
(a+b+c)
Rate per metre = (a+b+c+d) 39794.38
say 39794.38
12.15 Section Sinking of 9 m external diameter well ( other than
1200 pneumatic method of sinking ) through all types of
strata namely sandy soil, clayey soil and rock as
shown against each case, complete as per drawing
and technical specifications. Depth of sinking is
reckoned from bed level.
11th m 5% 11477.00
12th m 5% 12051.00
13th m 5% 12654.00
14th m 5% 13287.00
15th m 5% 13951.00
16th m 5% 14649.00
17th m 5% 15381.00
18th m 5% 16150.00
19th m 5% 16958.00
20th m 5% 17806.00
Total Cost from 10m upto 20m 144364.00
Avg Rate per metre 14436.40
12.15 A (iv) Beyond 20m upto 30 m
a Add 7.5 per cent for every additional meter depth of
sinking over the rate of sinking for the previous meter
Page 50 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
30th m 7.5% 36698.00 7340.00
Total Cost from 20m upto 30m 270790.45 54158.00
Avg Rate per metre 27079.05 5415.80
12.15 A (v) Beyond 30m upto 40 m
a Add 10 per cent for every additional meter depth of
sinking over the rate of sinking for the previous meter
Page 51 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
b Add 5 per cent of cost for dewatering on the cost, if
required
c Add 25 per cent of cost for Kentledge including Including 25% Including 5% for
supports, loading arrangement and Labour ). for Kentledge dewatering, if
required
31st m 7.5% 28856.00 7214.00 1443.00
32nd 7.5% 31020.00 38775.00 1551.00
33rd m 7.5% 33347.00 41684.00 1667.00
34th m 7.5% 35848.00 44810.00 1792.00
35th m 7.5% 38537.00 48171.00 1927.00
36th m 7.5% 41427.00 51784.00 2071.00
37th m 7.5% 44534.00 55668.00 2227.00
38th m 7.5% 47874.00 59843.00 2394.00
39th m 7.5% 51465.00 64331.00 2573.00
40th m 7.5% 55325.00 69156.00 2766.00
Total Cost from 30m upto 40m 408233.00 481436.00 20411.00
Avg Rate per metre 40823.30 48143.60 2041.10
12.15 B (v) Beyond 30m upto 40 m
a Add 10 per cent for every additional meter depth of
sinking over the rate of sinking for the previous meter
Page 52 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
Pneumatic breaker for drilling holes (@ 4.5 m per hour 18.202 11.00 200.218
P&M-45001
hour)
Consumables in protected blasting @ 10 per 2565.05
cent of (c)
Add for dewatering @ of 15 per cent of (a+b+c), 8580.10
if required
d) Overhead charges @ 20% on 8618.20
(a+b+c)
e) Contractor's profit @ 10% on 5170.92
(a+b+c+d)
Rate per metre = (a+b+c+d+e) 56880.13
say 56880.13
12.15 E Extra over item no. 12.15 (A) & (B) irrespective of
depth for sinking in rock bouldery strata (9 m dia well
)
Unit = Running Meter.
Taking output = 1 m
a) Labour
Mate day 0.65 335.00 217.75 L-12
Sinker ( skilled ) day 1.50 335.00 502.50 L-15
Sinking helper ( semi-skilled ) day 2.25 325.00 731.25 L-14
Diver day 0.50 365.00 182.50 L-07
Mazdoor day 12.00 325.00 3900.00 L-13
b) Machinery
Air Compressor 250 cfm hour 42.412 585.00 24810.728 P&M-15001
Pneumatic breaker hour 84.823 11.00 933.053 P&M-45001
Consumables in sinking @ 5 per cent of (b) 1287.19
Add for dewatering @ of 15 per cent of (a+b), if 4884.75
required
c) Overhead charges @ 20% on 7489.94
(a+b)
d) Contractor's profit @ 10% on 4493.97
(a+b+c)
Rate per metre = (a+b+c+d) 49433.62
say 49433.62
12.16 1200 Sinking of 10 m external diameter well ( other than
pneumatic method of sinking ) through all types of
strata namely sandy soil, clayey soil and rock as
shown against each case, complete as per drawing
and technical specifications. Depth of sinking is
reckoned from bed level.
Page 53 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
11th m 5% 12122.00
12th m 5% 12728.00
13th m 5% 13364.00
14th m 5% 14032.00
15th m 5% 14734.00
16th m 5% 15471.00
17th m 5% 16245.00
18th m 5% 17057.00
19th m 5% 17910.00
20th m 5% 18806.00
Total Cost from 10m upto 20m 152469.00
Avg Rate per metre 15246.90
12.16 A (iv) Beyond 20m upto 30 m
a Add 7.5 per cent for every additional meter depth of
sinking over the rate of sinking for the previous meter
Page 56 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
c) Overhead charges @ 20% on 1704.51
(a+b)
d) Contractor's profit @ 10% on 1022.71
(a+b+c)
Cost for 0.5m = a+b+c+d 11249.77
Rate per metre = (a+b+c+d)/0.50 22499.53
say 22499.53
12.17 A (ii) Beyond 3m upto 10m depth
Rate of sinking @ 0.13 m/hour
a) Labour
Mate day 0.32 335.00 107.20 L-12
Sinker day 2.00 335.00 670.00 L-15
Sinking helper (semi-skilled) day 4.50 325.00 1462.50 L-14
b) Machinery
Hire & running charges of crane with grab bucket hour 4.00 1042.00 4168.00
P&M-67001
of 0.75 cum capacity and accessories.
Consumables in sinking @10 per cent of (b) 416.80
c) Overhead charges @ 20% on 1364.90
(a+b)
d) Contractor's profit @ 10% on 818.94
(a+b+c)
Cost for 0.5m = a+b+c+d 9008.34
Rate per metre = (a+b+c+d)/0.50 18016.68
say 18016.68
12.17 A (iii) Beyond 10m upto 20m
a Add 5 per cent for every additional meter depth of
sinking over the rate of sinking for the previous meter
11th m 5% 18918.00
12th m 5% 19864.00
13th m 5% 20857.00
14th m 5% 21900.00
15th m 5% 22995.00
16th m 5% 24145.00
17th m 5% 25352.00
18th m 5% 26620.00
19th m 5% 27951.00
20th m 5% 29349.00
Total Cost from 10m upto 20m 237951.00
Avg Rate per metre 23795.10
12.17 A (iv) Beyond 20m upto 30 m
a Add 7.5 per cent for every additional meter depth of
sinking over the rate of sinking for the previous meter
11th m 5% 55193.00
12th m 5% 57953.00
13th m 5% 60851.00
14th m 5% 63894.00
15th m 5% 67089.00
16th m 5% 70443.00
17th m 5% 73965.00
18th m 5% 77663.00
19th m 5% 81546.00
20th m 5% 85623.00
Total Cost from 10m upto 20m 694220.00
Avg Rate per metre 69422.00
12.18 A (iv) Beyond 20m upto 30 m
a Add 7.5 per cent for every additional meter depth of
sinking over the rate of sinking for the previous meter
Page 60 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
28th m 7.5% 152707.00 30541.00
29th m 7.5% 164160.00 32832.00
30th m 7.5% 176472.00 35294.00
Total Cost from 20m upto 30m 1302166.00 260433.00
Avg Rate per metre 130216.60 26043.30
12.18 A (v) Beyond 30m upto 40 m
a Add 10 per cent for every additional meter depth of
sinking over the rate of sinking for the previous meter
Page 62 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
Air Compressor 250 cfm hour 69.418 585.00 40609.610 P&M-15001
Pneumatic breaker hour 90.478 11.00 995.257 P&M-45001
Pneumatic breaker for drilling holes (@ 4.5 m per hour 32.358 11.00 355.942
P&M-45001
hour)
Consumables in protected blasting @ 10 per 4196.08
cent of (c)
Add for dewatering @ of 15 per cent of (a+b+c), 14547.86
if required
d) Overhead charges @ 20% on 13806.11
(a+b+c)
e) Contractor's profit @ 10% on 8283.67
(a+b+c+d)
Rate per metre = (a+b+c+d+e) 91120.33
say 91120.33
12.18 E Extra over item no. 12.18 (A) & (B) irrespective of
depth for sinking in rock bouldery strata (12 m dia
well )
Unit = Running Meter.
Taking output = 1 m
a) Labour
Mate day 0.89 335.00 298.15 L-12
Sinker ( skilled ) day 1.50 335.00 502.50 L-15
Sinking helper ( semi-skilled ) day 2.25 325.00 731.25 L-14
Diver day 0.50 365.00 182.50 L-07
Mazdoor day 18.00 325.00 5850.00 L-13
b) Machinery
Air Compressor 250 cfm hour 75.398 585.00 44107.961 P&M-15001
Pneumatic breaker hour 150.796 11.00 1658.761 P&M-45001
Consumables in sinking @ 5 per cent of (b) 2288.34
Add for dewatering @ of 15 per cent of (a+b), if 8342.92
required
c) Overhead charges @ 20% on 12792.48
(a+b)
d) Contractor's profit @ 10% on 7675.49
(a+b+c)
Rate per metre = (a+b+c+d) 84430.34
say 84430.34
12.19 1200 Sinking of Twin D Type well (other than pneumatic
method of sinking) through all types of strata namely
sandy soil, clayey soil and rock as shown against
each case, complete as per drawing and technical
specifications. Depth of sinking is reckoned from bed
level.
11th m 5% 11979.00
12th m 5% 12578.00
13th m 5% 13207.00
14th m 5% 13867.00
15th m 5% 14560.00
16th m 5% 15288.00
17th m 5% 16052.00
18th m 5% 16855.00
19th m 5% 17698.00
20th m 5% 18583.00
Total Cost from 10m upto 20m 150667.00
Avg Rate per metre 15066.70
12.19 A (iv) Beyond 20m upto 30 m
a Add 7.5 per cent for every additional meter depth of
sinking over the rate of sinking for the previous meter
Page 64 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
c) Overhead charges @ 20% on 2756.97
(a+b)
d) Contractor's profit @ 10% on 1654.18
(a+b+c)
Rate per metre = (a+b+c+d) 18196.01
say 18196.00
12.19 B (iii) Beyond 10 m upto 20 m
a Add 5 per cent for every additional meter depth of
sinking over the rate of sinking for the previous meter
Page 65 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
Add for dewatering @ of 15 per cent of (a+b), if 5847.45
required
c) Overhead charges @ 20% on 8966.09
(a+b)
d) Contractor's profit @ 10% on 5379.65
(a+b+c)
Rate per metre = (a+b+c+d) 59176.19
say 59176.19
12.19 D Extra over item no. 12.19 (A) & (B) irrespective of
depth for sinking in Hard Rock
Unit = Running Meter
Taking output = 1 m
a) Material
Small dia.Explosive at 0.20 kg / cum kg 12.855 55.00 707.018 M-215
Electric detonators no 72.000 12.00 864.000 M-217
Detonating fuse coil m 224.000 105.00 23520.000 M-218
b) Labour
Mate day 0.74 335.00 247.90 L-12
Sinker ( skilled ) day 1.50 335.00 502.50 L-15
Sinking helper ( semi-skilled ) day 2.25 325.00 731.25 L-14
Diver day 0.50 365.00 182.50 L-07
Driller day 2.00 325.00 650.00 L-06
Blaster day 0.25 325.00 81.25 L-03
Mazdoor day 12.00 325.00 3900.00 L-13
c) Machinery
Air Compressor 250 cfm hour 42.905 585.00 25099.152 P&M-15001
Pneumatic breaker hour 51.419 11.00 565.614 P&M-45001
Pneumatic breaker for drilling holes (@ 4.5 m per hour 18.390 11.00 202.286
P&M-45001
hour)
Consumables in protected blasting @ 10 per 2586.71
cent of (c)
Add for dewatering @ of 15 per cent of (a+b+c), 8976.03
if required
d) Overhead charges @ 20% on 8745.04
(a+b+c)
e) Contractor's profit @ 10% on 5247.02
(a+b+c+d)
Rate per metre = (a+b+c+d+e) 57717.24
say 57717.24
12.19 E Extra over item no. 12.19 (A) & (B) irrespective of
depth for sinking in rock bouldery strata
Unit = Running Meter.
Taking output = 1 m
a) Labour
Mate day 0.65 335.00 217.75 L-12
Sinker ( skilled ) day 1.50 335.00 502.50 L-15
Sinking helper ( semi-skilled ) day 2.25 325.00 731.25 L-14
Diver day 0.50 365.00 182.50 L-07
Mazdoor day 12.00 325.00 3900.00 L-13
b) Machinery
Air Compressor 250 cfm hour 42.850 585.00 25066.990 P&M-15001
Pneumatic breaker hour 85.699 11.00 942.690 P&M-45001
Consumables in sinking @ 5 per cent of (b) 1300.48
Add for dewatering @ of 15 per cent of (a+b), if 4926.62
required
c) Overhead charges @ 20% on 7554.16
(a+b)
d) Contractor's profit @ 10% on 4532.49
(a+b+c)
Rate per metre = (a+b+c+d) 49857.44
say 49857.44
12.20 1200 Pneumatic sinking of wells with equipment of
approved design, drawing and specifications worked
by competent and trained personnel and comprising
of compression and decompression chambers,
reducers, two air locks separately for men and plant
& materials, arrangement for supply of fresh air to
working chambers, check valves, exhaust valves,
shafts made from steel plates of riveted construction
not less than 6 mm thick to withstand an air pressure
of 0.50 MPa, controlled blasting of hard rock where
required, staircases and 1 m wide landing plateforms
with railing, arrangement for compression and
decompression, electric lighting of 50 V maximum,
proper rooms for rest and medical examinations and
compliance with safety precautions as per IS:4138,
all as per clause1208.8 of MoRTH Specifications.
Unit - 1 cum
Page 66 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
Taking output = 5 cum
a) Material
M35 grade RCC corbel provided for supporting of Cum 8.00 6275.00 50200.00
equipment (Dimensions as per ground
conditions). Rate may be adopted vide Item 12.8 Item No. - 12.8 H
(H)
HYSD bar reinforcement in corbel tonne 0.48 62000.00 29760.00 M-083
Blasting material
Explosives Kg 1.50 55.00 82.50 M-215
Electric detonators each 6.00 12.00 72.00 M-217
b) Labour
Medical Officer day 0.50 2220.00 1110.00 L-16
Para medical personnel day 1.00 1110.00 1110.00 L-19
Mate day 1.86 335.00 623.10 L-12
Driller day 1.00 325.00 325.00 L-06
Blaster day 0.50 325.00 162.50 L-03
Mazdoor (for cutting, blasting, cleaning, removal day 30.00 325.00 9750.00
L-13
of Material etc.)
Mazdoor (Skilled) (for fixation and removal of day 10.00 335.00 3350.00
adopter for air lock, carrying out mechanical and
electrical operations and repairs and other skilled L-15
jobs.)
Diver day 4.00 365.00 1460.00 L-07
c) Machinery
(i) Induction, deinduction and erection of plant hour 6.00 9594.00 57564.00
and equipment including all components and
accessories for pneumatic method of well sinking. P&M-69001
Unit = 1 MT
Taking output = 1 MT
a) Material
i) Structural steel including 5 per cent wastage tonne 1.05 65000.00 68250.00 M-181
b) Labour
Mate day 0.80 335.00 268.00 L-12
Fitter day 4.00 400.00 1600.00 L-08
Blacksmith day 4.00 380.00 1520.00 L-01
Welder day 4.00 435.00 1740.00 L-02
Mazdoor day 8.00 325.00 2600.00 L-13
Electrodes, cutting gas and other consumables @ 3412.50
5 per cent on cost a (a) above.
c) Machinery
Hydra Crane of capacity 10T for lifting shifting hour 8.00 1181.00 9448.00 P&M-63003
Pile diameter-750 mm
Unit = meter
Taking output = 25
a) Materials
RCC Grade M35 (including additional concreteing cum 11.49 8598.70 98768.52 Item No. - 12.11 F
of 1m for pile head ) (iv) 29.07
Rate for concrete may be adopted same as for
pile vide item no. 12.11 F (iv)
Pile diameter-1000 mm
Unit = meter
Taking output = 25
a) Materials
RCC Grade M35 (including additional concreteing cum 20.42 8598.70 175588.48 Item No. - 12.11 F
of 1m for pile head ) (iv)
Rate for concrete may be adopted same as for
pile vide item no. 12.11 F (iv)
A Pile diameter-1200 mm
Unit = meter
Taking output = 25
a) Materials
RCC Grade M35 (including additional concreteing cum 29.41 8598.70 252847.42 Item No. - 12.11 F
of 1m for pile head ) (iv)
Rate for concrete may be adopted same as for
pile vide item no. 12.11 F (iv)
Page 69 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
Hire and running charges of Bentonite pump hour 7.00 Rate included in Rate included in
piling rig piling rig
Transit truck agitator
For transportation (6 cum Capacity) tonne-km 73.53 x L1 12.78 1879.43 P&M-76001
For unloading hour 1.63 2299.00 3755.71 P&M-34001
Front end loader for removing muck
(i) 3.1 Cum Capacity hour 4076.00 0.00 P&M-5001
(ii) 2.1 Cum Capacity hour 2515.00 0.00 P&M-5002
(iii) 1 Cum Capacity hour 2.72 1717.00 4674.90 P&M-5003
Tipper
For Loading time
(i) 18 cum capacity hour 2746.000 P&M-6001
(ii) 14 cum capacity hour 2435.000 P&M-6002
(iii) 10 cum capacity hour 2.72 2166.000 5897.40 P&M-6003
For disposal of muck from pile bore hole up to a
lead of 1 km
(i) 18 cum capacity t.km 7.160 P&M-72002
(ii) 14 cum capacity t.km 8.120 P&M-73002
(iii) 10 cum capacity t.km 47.05 10.030 471.90 P&M-74002
c) Labour
Mate/Supervisor day 0.14 335.00 46.90 L-12
Mazdoor day 3.50 325.00 1137.50 L-13
d) Overhead charges @ 20% on 39283.27
(b+c)
e) Contractor's profit @ 10% on 23569.96
(b+c+d)
Cost for 25 m = a+b+c+d+d+e 512116.97
Rate per metre (a+b+c+d+e)/25 20484.68
say 20484.68
12.26 1100 & Pile diameter-1500 mm
1700
Unit = meter
Taking output = 25
a) Materials
RCC Grade M35 (including additional concreteing cum 45.95 8598.70 395074.09 Item No. - 12.11 F
of 1 m for pile head ) (iv)
Rate for concrete may be adopted same as for
pile vide item no. 12.11 F (iv)
12.27 1100 & Driven cast-in-place vertical M35 grade R.C.C. Pile
1700 excluding Reinforcement complete as per Drawing
and & Technical Specification
Pile diameter - 1000 mm
Unit = Running meter
Taking output = 30 metre
a) Materials
RCC Grade M35 cum 23.55 8598.70 202499.39 Item No. - 12.11 F
(iv)
Rate for concrete may be adopted same as for
pile vide item no. 12.11 F (iv)
b) Materials Pile shoes
i) C.I. shoes for the pile Kg 160.00 65.00 10400.00 M-080
ii) M.S. clamps for shoe @ 35 Kg per pile of 15 m Kg 70.00 65.00 4550.00
M-123
iii) Steel helmet and cushion block on top of Kg 50.00 70.00 3500.00
M-174
casing head during driving
c) Machinery
Hire and running charges of piling rig Including hour 6.00 18807.00 112842.00
double acting pile driving hammer complete with P&M-38001
power unit and accessories.
Hiring and running charges for light crane 5 hour 0.50 1075.00 537.50
tonnes lifting capacity for lowering reinforcement P&M-63002
and handling steel casing.
Hire and running charges for light crane for hour 0.50 1075.00 537.50
P&M-63002
lowering reinforcement cage.
d) Labour
Mate/Supervisor day 0.16 335.00 53.60 L-12
Mazdoor day 4.00 325.00 1300.00 L-13
e) Overhead charges @ 20% on 26744.12
(b+c+d)
f) Contractor's profit @ 10% on 16046.47
(b+c+d+e)
Cost for 30 m = a+b+c+d+e 379010.58
Rate per metre (a+b+c+d+e)/30 12633.69
say 12633.69
Page 71 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
Note 1.The quantity of concrete required to be removed
above the designed top level of concrete, if any, will
be provided for in the rate analysis.
12.28 1100 & Driven cast-in-place vertical M35 grade R.C.C. Pile
1700 excluding Reinforcement complete as per Drawing
and & Technical Specification
Pile diameter - 1200 mm
Unit = Running meter
Taking output = 20 metre
a) Materials
RCC Grade M35 cum 22.61 8598.70 194416.61 Item No. - 12.11 F
(iv)
Rate for concrete may be adopted same as for
pile vide item no. 12.11 F (iv)
12.29 1100 & Driven precast vertical M35 grade R.C.C. Piles
1700 excluding Reinforcement complete as per Drawing
and & Technical Specification
Pile Diameter = 500 mm
Unit = Running Meter
Taking output = 60 m
a) Materials
RCC Grade M35 cum 11.78 8598.70 101292.69 Item No. - 12.11 F
(iv)
Rate for concrete may be adopted same as for
pile vide item no. 12.11 F (iv)
b ) Material Pile shoes
a) C.I Shoes Kg 240.00 65.00 15600.00 M-080
b) M.S. shoes Kg 105.00 65.00 6825.00 M-124
c) Steel helmet and cushion block on top of pile Kg 30.00 70.00 2100.00
M-174
head during driving.
c) Machinery
Crane20 t capacity hour 6.00 1509.00 9054.00 P&M-63005
Vibrating Pile driving hammer complete with hour 6.00 17687.00 106122.00
P&M-71001
power unit and accessories.
d) Labour
Mate/Supervisor day 0.12 335.00 40.20 L-12
Mazdoor day 3.00 325.00 975.00 L-13
Page 72 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
Add 1 per cent of (a+b+c) for carriage of piles 2420.09
from casting yard to work site and stacking, and
other imponderables during installation.
Page 75 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
d) Overhead charges @ 20% on 99161.82
(a+b+c)
e) Contractor's profit @ 10% on 59497.09
(a+b+c+d)
Cost for 60 m = a+b+c+d+e 654468.03
Rate per metre (a+b+c+d+e)/60 10907.80
say 10907.80
12.37 1100 Pile Load Test on single Vertical Pile in accordance
with IS:2911(Part-IV)
Unit = 1 MT
Taking output = 1 MT
a) Initial and routine load test tonne 1.00 300.00 300.00 300.00
b) Lateral load test tonne 1.00 500.00 500.00 500.00
say 500.00
Note Although, this item is incidental to work and is not
required to be included in BOQ of contract, the same
is required to be added in the estimate to assess cost
of work.
12.38 Dismantling of Reinforced Concrete Pile head
complete as per Drawing and Technical Specification
Unit = cum
Taking output = 1.25
a) Labour
Mate day 0.04 335.00 13.4 L-12
Mazdoor with Pneumatic breaker day 0.50 325.00 162.5 L-13
Blacksmith day 0.25 435.00 108.75 L-02
Mazdoor for loading and unloading day 0.25 325.00 81.25 L-13
b) Machinery
Air Compressor 250 cfm hour 0.625 585.00 365.625 P&M-15001
Pneumatic breaker hour 1.25 11.00 13.75 P&M-45001
Tipper
For transportation to dumping yard considering
lead @ 1 km
(i) 18 cum capacity t.km 7.160 P&M-72002
(ii) 14 cum capacity t.km 8.120 P&M-73002
(iii) 10 cum capacity t.km 1.875 10.030 18.81 P&M-74002
Loading & unloading time
(i) 18 cum capacity hour 2746.000 P&M-6001
(ii) 14 cum capacity hour 2435.000 P&M-6002
(iii) 10 cum capacity hour 0.292 2166.000 631.75 P&M-6003
d) Overhead charges @ 20% on 279.17
(a+b+c)
e) Contractor's profit @ 10% on 167.50
(a+b+c+d)
Cost for 1.25 cum = a+b+c+d 1842.50
Rate per cum = (a+b+c+d)/ 1.25 1474.00
say 1474.00
12.38 1100, Cement Concrete for Reinforced Concrete in Pile
1500 Cap complete as per Drawing and Technical
&1700 Specification
A RCC Grade M20
Case I RCC Grade M20 using batching plant & Concrete
pump
Unit = cum
Taking output = 60
a) Material
Per Cum Basic Cost (Rate as in sub-analysis) cum 60.00 5394.44 323666.22 Sub-Analysis of
Concrete - 19.05
b) Labour
For pouring and placing
Mate day 0.19 335.00 64.02 L-12
Mason day 1.00 470.00 470.00 L-11
Mazdoor day 3.78 325.00 1227.78 L-13
c) Machinery
Transit truck agitator
For transportation (6 cum Capacity) tonne-km 150 x L1 12.78 3834.00 P&M-76001 150
For unloading hour 1.39 2299.00 3193.06 P&M-34001
Hydraulic Boom placer pump hour 1.39 4192.00 5822.22 P&M-36001
d) Formwork @ 4 per cent on cost of concrete i.e. 13531.09
cost of material, labour and machinery
Page 76 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
Unit = cum
Taking output = 60
a) Material
Per Cum Basic Cost (Rate as in sub-analysis) cum 60.00 5394.44 323666.22 Sub-Analysis of
Concrete - 19.05
b) Labour
For pouring and placing
Mate day 0.36 335.00 120.60 L-12
Mason day 1.00 470.00 470.00 L-11
Mazdoor day 8.00 325.00 2600.00 L-13
c) Machinery
Transit truck agitator
For transportation (6 cum Capacity) tonne-km 150 x L1 12.78 3834.00 P&M-76001 150
For unloading hour 3.33 2299.00 7663.33 P&M-34001
d) Formwork @ 4 per cent on cost of concrete i.e. 13534.17
cost of material, labour and machinery
Page 77 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
Rate per cum = (a+b+c+d+e+f)/60 8270.76
say 8270.76
Note The value of a, b and c may be taken as applicable
i.e. either using concrete mixer or batching plant.
Page 78 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
d) Formwork @ 4 per cent on cost of concrete i.e. 14804.08
cost of material, labour and machinery
Page 79 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
Mazdoor day 8.00 325.00 2600.00 L-13
c) Machinery
Transit truck agitator
For transportation (6 cum Capacity) tonne-km 150 x L1 12.78 3834.00 P&M-76001 150
For unloading hour 3.33 2299.00 7663.33 P&M-34001
d) Formwork @ 4 per cent on cost of concrete i.e. 15037.54
cost of material, labour and machinery
Page 80 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
Providing and laying of PCC M15 levelling course
100mm thick below the pile cap.
Case I PCC Grade M15 using batching plant & Concrete
pump
Unit = cum
Taking output = 30
a) Material
Per Cum Basic Cost (Rate as in sub-analysis) cum 30.00 4799.42 143982.65 Sub-Analysis of
Concrete - 19.03
Water for curing Kl 15.75 60.00 945.00 M-191
b) Labour
For pouring and placing
Mate day 0.16 335.00 52.11 L-12
Mason day 1.50 470.00 705.00 L-11
Mazdoor day 2.39 325.00 776.39 L-13
c) Machinery
Transit truck agitator
For transportation (6 cum Capacity) tonne-km 75 x L1 12.78 1917.00 P&M-76001 0
For unloading hour 0.69 2299.00 1596.53 P&M-34001
Hydraulic Boom placer pump hour 0.69 4192.00 2911.11 P&M-36001
Water tanker ( speed @ 20km/hr and return
speed @ 30 km/hr and 30 mins for unloading )
(i) 16 KL capacity hour 1440.00 P&M-11001
(ii) 12 KL capacity hour 1270.00 P&M-11002
(iii) 6 KL capacity hour 2.33 967.00 2256.33 P&M-11003
Page 82 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
c) Overhead charges @ 20% on 2756.97
(a+b)
d) Contractor's profit @ 10% on 1654.18
(a+b+c)
Rate per metre = (a+b+c+d) 18196.01
say 18196.00
12.19 B (iii) Beyond 10 m upto 20 m
a Add 5 per cent for every additional meter depth of
sinking over the rate of sinking for the previous meter
Page 83 of 425
CHAPTER-12
FOUNDATIONS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
say 11366.21
12.24 Bored cast-in-situ M35 grade R.C.C. Pile excluding
1100,1600 Reinforcement complete as per Drawing and
& 1700 Technical Specifications and removal of excavated
earth with all lifts and lead upto 1000 m.
Pile diameter-1000 mm
Unit = meter
Taking output = 25
a) Materials
RCC Grade M35 (including additional concreteing cum 20.42 8598.70 175588.48 Item No. - 12.11 F
of 1m for pile head ) (iv)
Rate for concrete may be adopted same as for
pile vide item no. 12.11 F (iv)
A Pile diameter-1200 mm
Unit = meter
Taking output = 25
a) Materials
RCC Grade M35 (including additional concreteing cum 29.41 8598.70 252847.42 Item No. - 12.11 F
of 1m for pile head ) (iv)
Rate for concrete may be adopted same as for
pile vide item no. 12.11 F (iv)
Page 84 of 425
CHAPTER - 15
RIVER TRAINING AND PROTECTION WORKS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
16.01 2503 Providing and laying boulders apron on river bed for
protection against scour with stone boulders weighing
not less than 40 kg each complete as per drawing and
Technical specification.
Unit = cum
Taking output = 3 mx1.5mx1.25m = 5.63 cum
a) Material
4mm GI wire crates woven in mesh size of 100 sqm 22.00 0.00 0.00 M-102
mm x 100 mm.
Stone cum 5.63 3382.00 19040.66 M-003
Stone Spalls cum 1.13 3382.00 3821.66 M-008
b) Labour
Mate day 0.18 370.00 66.60 L-12
Mazdoor (Skilled) day 1.50 350.00 525.00 L-15
Mazdoor day *3.00 330.00 990.0 L-13
c) Overhead charges @ 18% on 4399.9
(a+b)
d) Contractor's profit @ 10% on 2884.38
(a+b+c)
Cost for 5.63 cum = a+b+c+d 31728.21
Rate per cum = (a+b+c+d)/5.63 5635.56
Add Royality (per cum) Stone 110.00
say 5745.56
* Including excavation for trimming for preparation of
bed.
Note Readymade woven wire crate rolls have been
considered in the rate analysis. In case readymade
rolls are not available, GI wire 4mm dia. @ 32 kg per
10 sqm may be provided. In that case 2 per cent of
the cost of GI wire may be added for weaving the wire
crates.
Page 1 of 425
CHAPTER - 15
RIVER TRAINING AND PROTECTION WORKS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
Providing and laying of apron with cement concrete
blocks of size 0.5 x 0.5 x 0.5 m cast in-situ and made
with nominal mix of M-15 grade cement concrete with
a minimum cement content of 250 kg/cum as per IRC:
21.
Unit = cum
Taking out put = 1 cum
Concrete Grade M15 Rate as per item No. 12.8 cum 1.00 7640.00 7640.00 Item No. - 12.8 A
(A) including OH & CP
Add 2 per cent of cost to account for excavation 152.80
for preparation of bed, nominal surface
reinforcement and filling of granular material in
recesses between blocks.
Rate per cum 7792.80
say 7793.00
16.04 2504 Providing and laying Pitching on slopes laid over
prepared filter media including boulder apron laid dry
in front of toe of embankment complete as per
drawing and Technical specifications
A Stone/Boulder
Unit = cum
Taking output = 1 cum
a) Material
Stone weighing not less than 40kg cum 1.00 3382.00 3382.00 M-003
Stone spalls of minimum 25 mm size cum 0.20 3382.00 676.40 M-008
b) Labour
Mate day 0.04 370.00 16.28 L-12
Mason day 0.35 480.00 168.00 L-11
Mazdoor day 0.75 330.00 247.50 L-13
c) Overhead charges @ 12% on 538.82
(a+b)
d) Contractor's profit @ 10% on 502.90
(a+b+c)
Rate per cum = (a+b+c+d) 5531.90
Add Royality (per cum) Stone balast 22.4-53 mm 110.00
say 5641.90
15.4 B Cement Concrete Blocks of size 0.3x0.3 x0.3 m cast
in cement concrete of Grade M15
Unit = cum
Taking output = 1 cum
Concrete Grade M15 Rate as per item No. 12.8 (A) cum 1.00 7640.00 7640.00 Item No. - 12.8 A
Page 2 of 425
CHAPTER - 15
RIVER TRAINING AND PROTECTION WORKS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
15.5 2504 Providing and laying Filter material underneath
pitching in slopes complete as per drawing and
Technical specification
Unit = cum
Taking output = 1 cum
a) Material
Graded stone aggregate of required size cum 1.20 3407.00 4088.40 M-011
b) Labour
Mate day 0.05 370.00 18.50 L-12
Mazdoor (Skilled) day 0.25 350.00 87.50 L-15
Mazdoor * day 1.00 330.00 330.00 L-13
c) Overhead charges @ 18% on 814.39
(a+b)
d) Contractor's profit @ 10% on 533.88
(a+b+c)
Rate per cum = (a+b+c+d) 5872.67
say 5873.00
Includes Mazdoor required for trimming of slope to
proper profile and preparation of bed.
15.6 700 & Geotextile Filter
2504
Laying of a geotextile filter between pitching and
embankment slopes on which pitching is laid to
prevent escape of the embankment material through
the voids of the stone pitching/cement concrete blocks
as well as to allow free movement of water without
creating any uplift head on the pitching.
Unit = sqm
Taking output = 10 sqm.
a) Labour
Mate day 0.02 370.00 7.40 L-12
Mazdoor day 0.30 360.00 108.00 L-13
Mazdoor (Skilled) day 0.10 360.00 36.00 L-15
b) Material
Permeable synthetic geotextile including 5 per sqm 11.00 0.00 0.00 M-183
cent for overlap and wastage
c) Overhead charges @ 18% on 27.25
(a+b)
d) Contractor's profit @ 10% on 17.87
(a+b+c)
Cost for 10 sqm = a+b+c+d 196.52
Rate per sqm = (a+b+c+d)/10 19.65
say 20.00
15.7 2504.4 Toe protection
A toe wall for toe protection can either be in dry rubble
masonry in case of dry rubble pitching or pitching with
stones in wire crates or it can be in PCC M15 nominal
mix if cement concert block have been used for
pitching . Rates for toe wall can be adopted from
respective clauses depending upon approved design.
The rate for excavation for foundation, dry rubble
masonry and PCC M15 have been analysed and
given in respective chapters.
Page 3 of 425
CHAPTER - 15
RIVER TRAINING AND PROTECTION WORKS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
a) Cement mortor 1:3 (Rate as in Item 12.6 sub- cum 0.13 7167.95 955.73 Sub-Analysis of
analysis) excluding OH & CP Concrete - 19.01 (A)
b) Add for cement concrete bedding (M15 Nominal cum 0.33 7640.00 2546.67 Item No. - 12.8 A
mix) vide Item 12.8 (A) excluding OH & CP . Quantity
shall be adopted as per design ( Assume Rubble
stone Flooring thickness 300mm and cement concrete
bedding thickness 100mm)
Add 1 per cent of cost to account for excavation 35.02
for preparation of bed.
c) Material
Stone cum 1.00 0.00 0.00 M-003
Stone Spalls cum 0.20 0.00 0.00 M-008
d) Labour
Mate day 0.08 370.00 29.60 L-12
Mason day 0.50 615.00 307.50 L-11
Mazdoor (for laying stones, filling of quarry spalls) day 1.50 360.00 540.00 L-13
Page 4 of 425
CHAPTER - 15
RIVER TRAINING AND PROTECTION WORKS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
15.10 2507.2 Curtain wall complete as per drawing and Technical
specification
A Stone masonry in cement mortar (1:3)
Coursed rubble masonry (1st sort) cum 1.00 4893.10 4893.10 Item No. - 12.7 A
Rate same as per item No. 12.7 (A) including OH &
CP
Rate per cum say 4893.00
or
15.10 B Cement concrete Grade M15
Concrete Grade M15 Rate as per item No. 12.8 cum 1.00 10304.34 10304.34 Item No. - 12.8 A
(A) including OH & CP
Rate per cum say 10304.00
Note Other items like excavation for foundation, filling
behind wall, filter media, weep holes etc. shall be
added separately as per approved design.
15.11 2507.2 Flexible Apron :Construction of flexible apron 1 m
thick comprising of loose stone boulders weighing not
less than 40 kg beyond curtain wall.
Unit = cum
Taking Output = 1 cum
a) Material
Stone cum 1.00 0.00 0.00 M-003
Stone Spalls cum 0.20 0.00 0.00 M-008
b) Labour
Mate day 0.05 370.00 18.50 L-12
Mason day 0.25 615.00 153.75 L-11
Mazdoor day 1.00 360.00 360.00 L-13
Add 1 per cent of cost of (a+b) for trimming and 5.32
preparation of bed.
c) Overhead charges @ 18% on 96.76
(a+b)
d) Contractor's profit @ 10% on 63.43
(a+b+c)
Rate per cum = (a+b+c+d) 697.77
say 698.00
15.12 2503.3 Gabian Structure for Retaining Earth
Providing and construction of a gabian structure for
retaining earth with segments of wire crates of size 7
m x 3 m x 0.6 m each divided into 1.5 m
compartments by cross netting, made from 4 mm
galvanised steel wire @ 32 kg per 10 sqm having
minimum tensile strength of 300 Mpa conforming to
IS:280 and galvanizing coating conforming to IS:4826,
woven into mesh with double twist, mesh size not
exceeding 100 x 100 mm, filled with boulders with
least dimension of 200 mm, all loose ends to be tied
with 4 mm galvanised steel wire
Unit = cum
Taking output = 7 x 3 x 0.6 = 12.60 cum
a) Labour
Mate day 0.28 370.00 103.60 L-12
Mazdoor day 5.00 360.00 1800.00 L-13
Mazdoor (Skilled) day 2.00 360.00 720.00 L-15
b) Material
Galvanised steel wire crates of mesh size 100 mm sqm 61.00 0.00 0.00 M-102
x 100 mm woven with 4mm dia. GI wire in rolls of
required size.
Stone boulders with least dimension of 200 mm cum 12.60 0.00 0.00 M-003
Stone spalls of minimum size 25 mm cum 2.52 0.00 0.00 M-008
c) Overhead charges @ 18% on 472.25
(a+b)
Page 5 of 425
CHAPTER - 15
RIVER TRAINING AND PROTECTION WORKS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
d) Contractor's profit @ 10% on 309.58
(a+b+c)
Cost for 12.60 cum (a+b+c+d) 3405.43
Rate per cum (a+b+c+d)/12.60 270.27
say 270.00
Note Readymade woven wire crate rolls have been
considered in the rate analysis. In case readymade
rolls are not available, GI wire 4mm dia. @ 32 kg per
10 sqm may be provided. In that case 2 per cent of
the cost of GI wire may be added for weaving the wire
crates.
Unit = cum
Taking output = 2 x 1 x 0.3 x 10 Nos. = 6.00 cum
a) Labour
Mate day 0.14 370.00 51.80 L-12
Mazdoor day 2.50 360.00 900.00 L-13
Mazdoor (Skilled) day 1.00 360.00 360.00 L-15
b) Material
Galvanised steel wire crates of mesh size 100 mm sqm 65.00 0.00 0.00 M-102
x 100 mm woven with 4mm dia. GI wire in rolls of
required size to cover 6.00 cum.
Stone boulders with least dimension of 200 mm cum 6.00 0.00 0.00 M-003
Stone spalls of minimum size 25 mm cum 1.20 0.00 0.00 M-008
c) Overhead charges @ 18% on 236.12
(a+b)
d) Contractor's profit @ 10% on 154.79
(a+b+c)
Cost for 6.00 cum (a+b+c+d) 1702.72
Rate per cum (a+b+c+d)/6.00 283.79
say 284.00
Note Readymade woven wire crate rolls have been
considered in the rate analysis. In case readymade
rolls are not available, GI wire 4mm dia. @ 32 kg per
10 sqm may be provided. In that case 2 per cent of
the cost of GI wire may be added for weaving the wire
crates.
Page 6 of 425
CHAPTER - 15
RIVER TRAINING AND PROTECTION WORKS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
15.14 2503 Providing & making Gabion structure with
Mechanically Woven Double Twisted Hexagonal
Shaped Wire mesh Gabion Boxes as per IS
16014:2012, MORT&H Clause 2500, of required size,
Mesh Type 10x12 (D=100 mm with tolerance of ± 2%)
Zinc coated, Mesh wire diameter 3.0 mm,
mechanically edged/selvedged with partitions at every
1m interval and shall have minimum 10 numbers of
openings per meter of mesh perpendicular to twist,
tying with lacing wire of diameter 2.2 mm, supplied
@3% by weight of Gabion boxes, filled with boulders
with least dimension of 200 mm, as per drawing, all
complete as per direction of Engineer-in-charge.
Unit = cum
Taking output = 2 x 1 x 1 m = 2 cum
a) Material
Crates made of Mesh type 10x12 (D=100 mm) Zn sqm 11.00 0.00 0.00 M-194
coated. (Mesh wire diameter 3.00 mm).
Surface area required = 11.00 sqm.
Stone boulder with least dimension 200mm cum 2.00 0.00 0.00 M-003
b) Labour
Mate day 0.10 370.00 37.00 L-12
Mason (for plain stone work) 2nd class day 0.50 450.00 225.00 L-10
Mazdoor * day 1.50 360.00 540.00 L-13
c) Overhead charges @ 18% on 144.36
(a+b)
d) Contractor's profit @ 10% on 94.636
(a+b+c)
Cost for 2.00 cum (a+b+c+d) 1040.996
Rate per cum (a+b+c+d)/2 520.498
say 520.00
Unit = Sqm
Taking output = 60
a) Labour
Mate day 0.120 370.000 44.400 L-12
Mazdoor day 1.800 360.000 648.000 L-13
Mazdoor (skilled) day 0.600 360.000 216.000 L-15
b) Machinery
Transit truck agitator
For Transportation Transit truck agitator 6 cum t.km 13.800 x L 12.770 176.226 P&M-76001
capacity
Unloding time hour 0.139 2299.000 319.306 #NAME?
Concrete Pump hour 0.139 4192.000 582.222 P&M-36001
c) Materials
PCC M30 Grade Refer relevant item of concrete in cum 6.000 8390.000 50340.000 Item No. - 12.8 F
Item 12.8 (F) by using batching plant, excluding
formwork i.e. per cum basic cost (a+b+c)
Fabric Form mattress with 30% shrinkage sqm 78.000 2300.00 179400.000 2300.00
Non-Woven Geotextile to be placed under 20700.000
concrete filled fabric form including 15 per cent for sqm 9.000 2300.00 2300.00
overlap and shrinkage
Page 7 of 425
CHAPTER - 15
RIVER TRAINING AND PROTECTION WORKS
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
d) Overhead charges @ 18% on 45436.708
(a+b+c)
e) Contractor's profit @ 10% on 29786.286
(a+b+c+d)
Cost for 60 sqm = a+b+c+d+e 327649.148
Rate per sqm = (a+b+c+d+e)/60 5460.819
Say, 5460.80
Page 8 of 425
SUB-ANALYSIS OF CONCRETE / MORTAR RATE
Unit = cum
Taking output = 15 Cum
a) Labour
Mate day 0.32 370.00 118.40 L-12
Skilled Mazdoor day 1.00 310.00 310.00 L-15
Mazdoor day 7.00 300.00 2100.00 L-13
b) Material
40 mm Aggregate cum 13.50 3950.91 53337.31 M-054
Coarse sand cum 6.75 2869.60 19369.80 M-004
cement tonne 3.45 5600.00 19320.00 M-081
Cost of water KL 1.38 50.00 69.00 M-191
c) Machinery c
Batching Plant of capacity 120 cum/hour hour 0.17 3909.00 651.50 P&M-19002
Generator 250 KVA hour 0.17 4344.00 724.00 P&M-22004
Loader 3.1 cum capacity hour 0.36 4076.00 1473.91 P&M-5001
Transit truck agitator
For loading & Unloding time hour 0.167 2299.000 383.17 P&M-34001
Rate per cum = (a+b+c)/15 6523.81
Fly ash conforming to IS: 3812-1966 (Part-I) cum 9.640 153.28 1477.57 M-010
Cost of water (Water/Cement Ratio - 0.4) KL 23.144 50.00 1157.20 M-191
b) Labour
Mate day 0.16 370.00 59.20 L-12
Skilled Mazdoor day 1.00 310.00 310.00 L-15
Mazdoor day 3.00 300.00 900.00 L-13
c) Machinery
Batching Plant of capacity 240 cum/hour hour 2.50 6013.00 15032.50 P&M-19001
Generator 250 KVA hour 2.50 4344.00 10860.00 P&M-22004
Loader 3.1 cum capacity hour 10.85 4076.00 44217.32 P&M-5001
Fly ash conforming to IS: 3812-1966 (Part-I) cum 9.640 153.28 1477.57 M-010
Cost of water (Water/Cement Ratio - 0.4) KL 23.144 50.00 1157.20 M-191
b) Labour
Mate day 0.16 370.00 59.20 L-12
Skilled Mazdoor day 1.00 310.00 310.00 L-15
Mazdoor day 3.00 300.00 900.00 L-13
c) Machinery
Batching Plant of capacity 120 cum/hour hour 5.00 3909.00 19545.00 P&M-19002
Generator 250 KVA hour 5.00 4344.00 21720.00 P&M-22004
Loader 3.1 cum capacity hour 10.85 4076.00 44217.32 P&M-5001
###
Fly ash Total fly ash = 40.693 + 54.26 = 94.95 tonnes.
(Say 95 tonnes)
###
21.19 C PQC M 35 grade Using Batching Plant-120 cum capacity
Unit ; cum
Taking output = 900 Cum ###
a) Material
Cement @ 150 kg/cum of concrete tonne 360.00 6200.00 2232000.00 M-081
Coarse Sand as per IS: 383 @ 0.45 cum/cum of cum 405.00 3536.00 1432080.00 M-004
concrete
Crushed stone coarse aggregate of 25 mm and 12.5 cum 810.00 4351.00 3524310.00 M-052
mm nominal sizes graded as per table 600-1 @ 0.90
cum/cum of concrete conforming to clause 602.2.6.
###
Fly ash Total fly ash = 40.693 + 54.26 = 94.95 tonnes.
(Say 95 tonnes)
###
19.20 PCC Grade M15 Using Batching Plant for Kerb
Unit = cum
Taking output = 360 Cum
a) Material
Cement tonne 99.00 5600.00 554400.00 M-081
Coarse sand cum 162.000 2869.60 464875.20 M-004
40 mm Aggregate cum 194.400 3024.60 587982.24 M-054
20 mm Aggregate cum 97.200 3259.60 316833.12 M-052
10 mm Aggregate cum 32.400 3219.60 104315.04 M-050
Cost of water (Water/Cement Ratio - 0.4) KL 39.600 50.00 1980.00 M-191
b) Labour
Mate day 0.16 370.00 59.20 L-12
Skilled Mazdoor day 1.00 310.00 310.00 L-15
Mazdoor day 3.00 300.00 900.00 L-13
c) Machinery
Batching Plant of capacity 120 cum/hour hour 4.00 3909.00 15636.00 P&M-19002
Generator 250 KVA hour 4.00 4344.00 17376.00 P&M-22004
Loader 3.1 cum capacity hour 8.68 4076.00 35373.86 P&M-5001
Transit truck agitator
For loading & Unloding time hour 4.000 2299.000 9196.00 P&M-34001
Unit = Each
Taking output = one traffic sign
Item No. - 9.01 A -
i) Excavation for foundation cum 0.122 131.18 15.94
(I)
7813.00 Item No. - 9.14 A,
ii) Cement concrete M15 grade cum 0.122 949.28
case - II
iii) Painting angle iron post two coats sqm 1.414 62.64 88.56 Item No. - 8.9
a) Labour (For fixing at site)
Mate day 0.010 3460.39 34.60 M-004
Mazdoor day 0.250 3460.39 865.10 M-005
b) Material
Mild Steel 'L' Angle Back Support Frame 25 x 25 x
kg 2.200 79.74 175.43 M-181/1000
3mm
Mild Steel circular pipe 65 NB ,3.2 mm thicknness,
kg 20.556 79.74 1639.14 M-181/1000
3.6 meter height
Aluminium sheeting fixed with encapsulated lens type
reflective sheeting of size including lettering and signs as
applicable
Add 2 per cent of cost of angle iron towards cost of
drilling holes, nuts, bolts etc.
(i) 120 cm equilateral triangle sqm 0.624 0.00 0.00 M-061
or
( ii ) 90 cm equilateral triangle sqm 0.351 0.00 0.00 M-061
or
(iii) 75 cm equilateral triangle sqm 0.244 0.00 0.00 M-061
or
(iv) 60 cm equilateral triangle sqm 0.156 0.00 0.00 M-061
or
(v) 120 cm circular sqm 1.131 0.00 0.00 M-061
or
(vi) 90 cm circular sqm 0.636 0.00 0.00 M-061
or
(vii) 75cm circular sqm 0.442 0.00 0.00 M-061
or
(viii) 60 cm circular sqm 0.283 0.00 0.00 M-061
or
( ix ) 90 cm x 75 cm rectangular sqm 0.675 0.00 0.00 M-061
or
(x) 80 mm x 60 mm rectangular sqm 0.480 0.00 0.00 M-061
or
(xi) 60 cm x 50 cm rectangular sqm 0.300 0.00 0.00 M-061
or
(xii) 60 cm x 45 cm rectangular sqm 0.270 0.00 0.00 M-061
or
(xiii ) 60 cm x 60 cm square sqm 0.360 0.00 0.00 M-061
or
(xiv) 120 cm high octagon sqm 1.193 0.00 0.00 M-061
or
(xv) 90 cm high octagon sqm 0.671 0.00 0.00 M-061
or
( xvi ) 75 cm high octagon sqm 0.466 0.00 0.00 M-061
CHAPTER-8
TRAFFIC SIGNS, MARKINGS & OTHER ROAD APPURTENANCES
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
c) Machinery
Tractor-trolley hour 0.010 873.00 8.73 P&M-12001
( ii ) 90 cm equilateral triangle
d) Overhead charges @ 18% on
679.82
(a+b+c)
e) Contractor's profit @ 10% on
445.66
(a+b+c+d)
Rate per traffic sign = ( i+ii+iii+a+b+c+d+e) 4902.25
say 4902.00
( v ) 120 cm circular
d) Overhead charges @ 18% on
679.82
(a+b+c)
e) Contractor's profit @ 10% on
445.66
(a+b+c+d)
Rate per traffic sign = ( i+ii+iii+a+b+c+d+e) 4902.25
say 4902.00
(vi) 90 cm circular
d) Overhead charges @ 18% on
679.82
(a+b+c)
e) Contractor's profit @ 10% on
445.66
(a+b+c+d)
Rate per traffic sign = ( i+ii+iii+a+b+c+d+e) 4902.25
say 4902.00
(viii) 60 cm circular
d) Overhead charges @ 18% on
679.82
(a+b+c)
CHAPTER-8
TRAFFIC SIGNS, MARKINGS & OTHER ROAD APPURTENANCES
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
e) Contractor's profit @ 10% on
445.66
(a+b+c+d)
Rate per traffic sign = ( i+ii+iii+a+b+c+d+e) 4902.25
say 4902.00
( ix ) 90 cm x 75 cm rectangular
d) Overhead charges @ 18% on
679.82
(a+b+c)
e) Contractor's profit @ 10% on
445.66
(a+b+c+d)
Rate per traffic sign = ( i+ii+iii+a+b+c+d+e) 4902.25
say 4902.00
( x ) 80 mm x 60 mm rectangular
d) Overhead charges @ 18% on
679.82
(a+b+c)
e) Contractor's profit @ 10% on
445.66
(a+b+c+d)
Rate per traffic sign = ( i+ii+iii+a+b+c+d+e) 4902.25
say 4902.00
(xi) 60 cm x 50 cm rectangular
d) Overhead charges @ 18% on
679.82
(a+b+c)
e) Contractor's profit @ 10% on
445.66
(a+b+c+d)
Rate per traffic sign = ( i+ii+iii+a+b+c+d+e) 4902.25
say 4902.00
(xii) 60 cm x 45 cm rectangular
d) Overhead charges @ 18% on
679.82
(a+b+c)
e) Contractor's profit @ 10% on
445.66
(a+b+c+d)
Rate per traffic sign = ( i+ii+iii+a+b+c+d+e) 4902.25
say 4902.00
(xiii ) 60 cm x 60 cm square
d) Overhead charges @ 18% on
679.82
(a+b+c)
e) Contractor's profit @ 10% on
445.66
(a+b+c+d)
Rate per traffic sign = ( i+ii+iii+a+b+c+d+e) 4902.25
say 4902.00
Unit = sqm
Taking output = 0.9
Item No. - 9.01 A -
i) Excavation for foundation cum 0.122 131.18 15.94
(I)
Item No. - 9.14 A,
ii) Cement concrete M15 grade cum 0.122 7819.00 950.01
case - I
iii) Painting angle iron post two coats sqm 1.414 62.64 88.56 Item No. - 8.9 A,
a) Labour (For fixing at site)
Mate day 0.010 370.00 3.70 L-12
Mazdoor day 0.200 360.00 72.00 L-13
b) Material
Mild Steel 'L' Angle Back Support Frame 35 x 35 x
kg 6.080 79.740 484.82 M-181/1000
3mm
Mild Steel circular pipe 65 NB ,3.2 mm thicknness,
kg 20.556 79.740 1639.14 M-181/1000
3.6 meter height
Aluminium sheeting fixed with encapsulated lens type 0.00 M-061
sqm 0.900 0.00
reflective sheeting of size 0.9 sqm
Add 2 per cent of cost of materials for drilling holes,
nuts, bolts, fabrication etc.
c) Machinery
Tractor-trolley hour 0.020 873.00 17.46 P&M-12001
d) Overhead charges @ 18% on
588.89
(a+b+c)
e) Contractor's profit @ 10% on
386.05
(a+b+c+d)
Cost for 0.9 sqm =I+ii+ii+ a+b+c+d+e 4246.56
Rate per sqm (for sign having area upto 0.9 sqm) =
4718.41
(I+ii+iii+a+b+c+d+e)/0.90
say 4718.00
I) Lettering and arrow marks on sign board to be
Note provided separately as per actual requirement. Rates for
these items have been analysed separately
CHAPTER-8
TRAFFIC SIGNS, MARKINGS & OTHER ROAD APPURTENANCES
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
ii) Rate for excavation, cement concrete M-25 and
painting may be taken from respective chapters
Direction and Place Identification Signs with size more
8.6 801
than 0.9 sqm size Board.
Unit = sqm
Taking output = 1.5
Item No. - 9.01 A -
i) Excavation for foundation cum 0.243 131.18 31.88
(I)
Item No. - 9.14 A,
ii) Cement concrete M15 grade cum 0.243 7819.00 1900.02
case - I
iii) Painting angle iron post two coats sqm 2.827 62.64 177.11 Item No. - 8.9
a) Labour (For fixing at site)
Mate day 0.010 370.00 3.70 L-12
Mazdoor day 0.300 360.00 108.00 L-13
b) Material
Mild Steel 'L' Angle Back Support Frame 40 x 40 x 5
kg 14.400 79.740 1148.26 M-181/1000
mm
Mild Steel circular pipe 65 NB ,3.2 mm thicknness,
kg 41.112 79.740 3278.28 M-181/1000
3.6 meter height
Aluminium sheeting fixed with encapsulated lens type
sqm 1.500 0.00 0.00 M-061
reflective sheeting
Add 2 per cent of cost of materials for drilling holes,
nuts, bolts, fabrication etc.
c) Machinery
Tractor-trolley hour 0.020 873.00 17.46 P&M-12001
d) Overhead charges @ 18% on
1199.65
(a+b+c)
e) Contractor's profit @ 10% on
786.43
(a+b+c+d)
Cost for 1.5 sqm =I+ii+ii+ a+b+c+d+e 8650.78
Rate per sqm ( for sign having area more than 0.9 sqm)
5767.19
= ( i+ii+iii+a+b+c+d+e)/1.50
say 5767.00
i) Lettering and arrow marks on sign board to be provided
Note separately as per actual requirement. Rates for these
items have been analysed separately
ii) Rate for excavation, cement concrete M-15 and
painting may be taken from respective chapters
8.7 802 Overhead Signs
Unit = Each
Taking output = 57 Nos.
Item No. - 9.14
a) M-15 grade of the boundary stone cum 1.250 11154.00 13942.50
Case II
Item No. - 9.16 /
b) Steel reinforcement kg 79.800 106.83 8525.35
1000
c) Excavation in soil cum 10.720 170.00 1822.40 Item No. - 9.01 A
CHAPTER-8
TRAFFIC SIGNS, MARKINGS & OTHER ROAD APPURTENANCES
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
per letter
d) Lettering, each 10 cm high per cm 2280.000 1.10 2508.00 Item No. - 8.3
high
Transportation and fixing
e) Labour
Mate day 0.570 370.00 210.90 L-12
Mazdoor day 14.250 360.00 5130.00 L-13
f) Machinery
Tractor-trolley hour 6.000 873.00 5238.00 P&M-12001
g) Material
Stone spall cum 11.970 0.00 0.00 M-008
h) Overhead charges @ 18% on
1904.20
(e+f+g)
i) Contractor's profit @ 10% on
1248.31
(e+f+g+h)
Cost for 57 Nos. boundary pillar = (a+b +c+d +e+ f+g+h+i
40529.67
)
Rate for each boundary pillar = (a+b+c+d+e+ f+g+h+i)/57 711.05
say 711.00
In case of soft ground, a proper foundation may be
provided as per approved design. In case foundation is
Note required to be provided, the items of excavation and
foundation concrete are required to be measured and
paid separately.
8.17 808 G.I Barbed Wire Fencing 1.2 Metre High
Suggest
8.28 Lighting on Bridges
ive
CHAPTER-8
TRAFFIC SIGNS, MARKINGS & OTHER ROAD APPURTENANCES
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
Providing and fixing lighting on bridges, mounted on steel
hollow circular poles of standard specifications, 5 m high
fixed on parapets with cement concrete, 20 m apart and
fitted with sodium vapour lamp
Unit = Each
Taking output = one light
a) Labour
Mate day 0.020 370.00 7.40 L-12
Mazdoor day 0.400 360.00 144.00 L-13
Electrician day 0.200 615.00 123.00 L-02
b) Material
i) Steel circular hollow pole of standard specification 0.00 0.00 M-171
for street lighting to mount light at 5 m above deck each 1.000
level
ii) Sodium vapour lamp 70 watt each 1.000 0.00 0.00 M-169
Add 1 per cent of cost of material for holder, electric
0.00
cable, insulation, ladder, scaffolding etc
c) Painting
Providing two coats of alluminium paint over steel 87.00 240.12 Item No. - 8.9
sqm 2.760
circular hollow pipe
d) Overhead charges @ 18% on
49.39
(a+b)
e) Contractor's profit @ 10% on
32.38
(a+b+d)
Rate per light = a+b+c+d+e 596.29
say 596.00
The items of cement concrete to be measured and paid
Note separately as per approved design. The rate for painting
has already been analysed in this chapter.
Suggest
8.29 Cable Duct Across the Road
ive
Suggest
8.32 Traffic Control System and Communication System
ive
Providing a traffic control centre and communication
system including telecommunication facilities and related
accessories, CCTV, radar, vehicle detection camera,
central computer system
These are specialised item of telecommunication system
and are the commercial products. The designer is
required to contact the manufacturers to ascertain market
prices. In case of civil works required to be executed for
these installations, pricing may be done as per rates in
relevant chapters for quantities derived as per approved
design and drawing.
As regards the locations where such devices are
required to be installed, the traffic control authority should
be consulted to finalise the location
Suggest
8.33 Gantry Mounted Variable Message Sign Board
ive
Providing and erecting gantry mounted variable message
sign board electronically operated capable of flashing the
desired message over a designed support system of
aluminium alloy or galvanised steel, erected as per
approved design and drawings and with lateral clearance
as per clause 802.3
(i) Gantry Support System
Unit = tonne
Taking output=1 tonne
a) Labour
Mate day 0.120 370.00 44.40 L-12
Mazdoor day 2.000 360.00 720.00 L-13
Blacksmith day 1.000 615.00 615.00 L-02
b) Material
Alluminium alloy/galvanised steel including 5 per cent
tonne 1.050 0.00 1649.00 M-060
wastage
Add 15 per cent of cost of material for fabrication
247.35
and erection.
Add 1 per cent of cost of material for nuts, bolts and
16.49
welding
c) Machinery
Truck 10 tonne hour 1.000 1649.00 1649.00 P&M-6004
d) Overhead charges @ 18% on
889.42
(a+b+c)
e) Contractor's profit @ 10% on
583.07
(a+b+c+d)
Rate per tonne = a+b+c+d+e 6413.73
say 6414.00
CHAPTER-8
TRAFFIC SIGNS, MARKINGS & OTHER ROAD APPURTENANCES
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
8.33 (ii) Message Display
Message display board 6 sqm electronically operated
with complete electronic fitments for flashing the pre-
determined messages.
This is a specilised commercial product and the lumpsum
rate including erection at site is required to be as
certained from the market and including in the rate
analysis. The size of the board will vary depending upon
specific location.
The rate for the gantry mounted variable sign would be
the addition of cost of gantry support system as per
approved design determined at (i) above and the cost of
message display board as certained from the market at
(ii) above
Suggest
8.34 Traffic Impact Attenuators at Abutments and Piers
ive
A With Scrap Tyres
Provision and installation of traffic attenuators at
abutment/pier of flyovers bridges using scrap tyres of
size 100 x 20 retrieved from trucks laid in 2 rows and 4
tiers, one above the other and tied with 20 mm wire rope
as per approved design and drawings.
Unit = sqm
Taking output = 20sqm
a) Labour
Mate day 0.080 370.00 29.60 L-12
Mazdoor day 1.500 360.00 540.00 L-13
Blacksmith day 0.250 615.00 153.75 L-02
b) Material
Scrap tyres of size 900 x 20 each 80.000 0.00 0.00 M-162
20 mm steel wire rope kg 150.000 0.00 0.00 M-178
Add 1 per cent of cost of wire rope for clamps etc. 0.00
c) Machinery
Tractor-trolley hour 3.000 873.00 2619.00 P&M-12001
d) Overhead charges @ 18% on
601.62
(a+b+c)
e) Contractor's profit @ 10% on
394.40
(a+b+c+d)
Cost for 20 sqm = a+b+c+d+e 4338.37
Rate per sqm = (a+b+c+d+e)/20 216.92
say 217.00
8.34 B Using Plastic/Steel Barrel, Filled with Sand
Provision and installation of traffic impact attenuator at
abutment/pier of flyovers bridges using plastic/steel
barrels 0.60 m dia and 1.0 m in height, filled with sand in
three rows and tied with20 mm steel wire rope as per
approved design and drawings
Unit = sqm
Taking output = 20sqm
a) Labour
Mate day 0.130 370.00 48.10 L-12
Mazdoor day 3.000 360.00 1080.00 L-13
Blacksmith day 0.250 615.00 153.75 L-02
b) Material
Plastic barrels each 50.000
or
Steel barrels each 50.000 0.00 0.00 M-173
Sand cum 8.000 3460.39 27683.13 M-004
20 mm steel wire rope kg 15.000 0.00 0.00 M-178
Add 1 per cent of cost of wire rope for clamps etc. 0.00
c) Machinery
Tractor-trolley hour 2.000 873.00 1746.00 P&M-12001
CHAPTER-8
TRAFFIC SIGNS, MARKINGS & OTHER ROAD APPURTENANCES
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
d) Overhead charges @ 18% on
5527.98
(a+b+c)
e) Contractor's profit @ 10% on
3623.90
(a+b+c+d)
Cost for 20 sqm = a+b+c+d+e 39862.85
Rate per sqm = (a+b+c+d+e)/20 1993.14
say 1993.00
8.34 C With HI - DRO cell Sandwich (Patented)
(In this patented HI - DRO cell system, water gets
discharged from plastic tubes on impact over a pre-
determined time, thus absorbing the energy)
Providing and installing a patentend HI - DRO cell system
as a traffic impact attenuators, using plastic tubes 50 cm
dia, 1.2 m in height, 25 mm opening at the top, placed in
three rows, filled with water and tied with a 20 mm steel
wire rope
Unit = sqm
Taking output = 10sqm
a) Labour
Mate day 0.100 370.00 37.00 L-12
Mazdoor day 2.500 360.00 900.00 L-13
b) Material
Plastic tubes 50 cm dia,1.2 m high each 40.000 0.00 0.00 M-138
Cost of water KL 12.000 50.00 600.00 M-191
20 mm steel wire rope kg 100.000 0.00 0.00 M-178
Add 1 per cent of cost of wire rope for clamps etc. 0.00
c) Machinery
Tractor-trolley hour 2.000 873.00 1746.00 P&M-12001
Water tanker6 KL capacity hour 2.000 967.00 1934.00 P&M-11003
d) Overhead charges @ 18% on
939.06
(a+b+c)
e) Contractor's profit @ 10% on
615.61
(a+b+c+d)
Cost for 10 sqm = a+b+c+d+e 6771.67
Rate per sqm = (a+b+c+d+e)/10 677.17
say 677.00
Suggest
8.35 Solar Powered Road Marker ( Solar Stud)
ive
CHAPTER-8
TRAFFIC SIGNS, MARKINGS & OTHER ROAD APPURTENANCES
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
Supplying of Solar Raised Pavement Markers made of
polycarbonate molded body with circular shape, solar
powered,LED self illumination in active mode, 360
degree illumination and reflective panels with micro
prismatic lens capable of providing total internal reflection
of the light entering the lens face in passive mode. The
marker shall support a load of 20000 kg tested in
accordance to ASTM D 4280. The marker should be
resistant to dust and water ingress according to IP 65
standards and should withstand temperatures in the
range of 0 C to 70 C. Color of lighting could be provided
in red or yellow (amber) as per requirement and typical
frequency of blinking is 1 Hz. There should be current
losses of less than 20 microamperes at 2.4 V in
sleepcharging mode to enhance the life of the marker
and a full charge should provide for a minimum
autonomy of 50 hours. The height, width and length of
the marker shall not be less than 10 mm x 100 mm x 100
mm. Also, the surface diameter of the marker shall not be
less than 100 mm respectively. The weight of the marker
shall not exceed 0.5 Kilograms. Fixing will be by drilling
holes on the road for the shanks to go inside, without
nails and using epoxy resin based adhesive and
complete as directed by the engineer.
Unit = Nos
Taking output = 50Nos
a) Labour
Mate day 0.040 370.00 14.80 L-12
Mazdoor day 1.000 360.00 360.00 L-13
b) Material
Poly carbonate or ABS body and shall support a load 0.00
of 13.635 Kg tested in accordance to ASTM D 4280
each 50.000 0.00 M-062
with height not exceeding 20mm and width/length not
exceeding 130mm
Add 10 per cent of cost of material for fixing and
0.00
installation
c) Overhead charges @ 18% on
67.46
(a+b)
d) Contractor's profit @ 10% on
44.23
(a+b+c)
Cost for 50 studs = a+b+c+d 486.49
Rate per studs = (a+b+c+d)/50 9.73
say 10.00
Suggest
8.36 Traffic Cone
ive
Provision of red fluorescent with white reflective sleeve
traffic cone made of low density polyethylene (LDPE)
material with a square base of 390 x 390 x 35 mm and a
height of 770 mm, 4 kg in weight, placed at 1.5 m
interval, all as per BS 873
Unit = Running metre
Taking output = 68 Nos.
a) Labour
Mate day 0.020 370.00 7.40 L-12
Mazdoor day 0.500 360.00 180.00 L-13
b) Material
Traffic cones with 150 mm reflective sleeve each 68.000 0.00 0.00 M-188
c) Machinery
Tractor-trolley hour 0.100 873.00 87.30 P&M-12001
d) Overhead charges @ 18% on
49.45
(a+b+c)
CHAPTER-8
TRAFFIC SIGNS, MARKINGS & OTHER ROAD APPURTENANCES
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
e) Contractor's profit @ 10% on
32.41
(a+b+c+d)
Cost for 68 Nos. = a+b+c+d+e 356.56
Rate per metre = (a+b+c+d+e)/68 5.24
say 5.00
Suggest
8.37 Roadside Amenities
ive
A Rest areas
Providing plainly furnished accommodation for rest
rooms, dormitories, restaurants, stalls, shops, petrol
pump, telephone booth, first aid room, traffic aid post,
police assistance booth, including electricity, toilet and
sewerage system
Pricing may be done based on current plinth area rates
approved by PWD/CPWD/MES for a particular zone.
Area is required to be assessed for specific location as
per actual site conditions
Parking areas and bus laybyes for trucks, buses and light
B
vehicles
C Lawn
Providing a lawn planted with grass and its maintenance
Unit = each
Taking output = one number
Earthwork cum
Cement Concrete cum
brick masonry or cum
stone masonry cum
Painting sqm 2.500 62.64 156.60 Item No. - 8.9
a) Labour
Mate day 0.090 370.00 33.30 L-12
Mazdoor day 1.000 360.00 360.00 L-13
Blacksmith (Ist class) day 1.000 615.00 615.00 L-02
CHAPTER-8
TRAFFIC SIGNS, MARKINGS & OTHER ROAD APPURTENANCES
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
Welder day 0.250 615.00 153.75 L-02
b) Material
Steel pipe 100 mm dia metre 3.500 0.00 0.00 M-177
Steel pipe 25 mm dia metre 10.000 0.00 0.00 M-175
CGI sheets (0.8 mm) kg 8.000 0.00 0.00 M-082
Add 25 per cent of cost of material for fabrication 329.66
Add 2 per cent of cost of material for welding
26.37
consumables, J-hooks, washers etc.
c) Machinery
Tractor-trolley hour 0.500 873.00 436.50 P&M-12001
d) Overhead charges @ 18% on
380.01
(a+b+c)
e) Contractor's profit @ 10% on
249.12
(a+b+c+d)
Rate per policeman umbrella = a+b+c+d+e Say 1421.67
suggesti
8.40 High Mast Pole Lighting at Interchanges and Flyovers
ve
Unit = each
Taking output = one sign post
Following types of signs are required to be fixed in
construction zones for safety of traffic
a) Diversion one km ahead
b) Traffic sign ahead
c) Road ahead closed
d) Men at work
e) Road narrow
f) Single file traffic
g) Right lane diverted
h) Left lane diverted
i) Right lane closed
j) Left lane closed
k) Median closed
l) Diversion to other carriageway
m) Traffic signal ahead
n) Two way traffic
o) Un - even road
p) Slippery road
q) Loose chippings
r) Dual carriageway ends
s) Diversion
t) Do not enter
u) Road closed
v) Stop
w) Slow
x) One way
y) Give way
z) Overtaking prohibited
aa) Speed limit
bb) Weight limit
cc) Height and length limit
dd) No stopping or standing
ee) Any other warning or regulatory safety sign as per
site requirement and consistent with IRC:SP:55 and
IRC:67
The rate for traffic signs are already worked out and
given elsewhere in this chapter. The same may be
adopted.
CHAPTER-8
TRAFFIC SIGNS, MARKINGS & OTHER ROAD APPURTENANCES
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
suggesti
8.43 Portable Barricade in Construction Zone
ve
Installation of a steel portable barricade with horizontal
rail 300 mm wide, 2.5 m in length fitted on a 'A' frame
made with 45 x 45 x 5 mm angle iron section, 1.5 m in
height, horizontal rail painted (2 coats) with yellow and
white stripes, 150 mm in width at an angle of 450, 'A'
frame painted with 2 coats of yellow paint, complete as
per IRC:SP:55-2001
Unit = each
Taking output = one steel portable barricade
a) Labour
Mate day 0.020 370.00 7.40 L-12
Mazdoor day 0.250 360.00 90.00 L-13
Painter day 0.500 400.00 200.00 L-18
Welder day 0.250 615.00 153.75 L-02
b) Material
Angle iron 45 x 45 x 5 mm kg 25.000 79.74 1993.50 M-181 /1000
79.74 1196.10 M-181 /1000
MS sheet 300 mm wide,2.5 m long and 2.6 mm thick kg 15.000
Paint litre 0.500 250.00 125.00 M-130
Add 2 per cent of cost of steel for welding consumables,
63.79
nuts & bolts and drilling holes
c) Overhead charges @ 18% on
689.32
(a+b)
d) Contractor's profit @ 10% on
813.40
(a+b+c)
Rate per barricade = a+b+c+d 5332.26
say 5332.00
suggesti
8.44 Permanent Type Barricade in Construction Zone
ve
A With steel components
Construction of a permanent type barricade made of
steel components, 1.5 m high from road level, fitted with
3 horizontal rails 200 mm wide and 4 m long on 50 x 50 x
5 mm angle iron vertical support, painted with yellow and
white strips, 150 mm in width at an angle of450, complete
as per IRC:SP:55-2001
Unit = each
Taking output = one barricade
a) Labour
Mate day 0.050 370.00 18.50 L-12
Mazdoor day 0.300 360.00 108.00 L-13
Painter day 0.600 400.00 240.00 L-18
Welder day 0.300 615.00 184.50 L-02
b) Material
Angle iron 50 x 50 x 5 mm,2 m long,2 Nos. kg 15.000 79.74 1196.10 M-181 /1000
MS sheet of 12 SWG,3 Nos of 200 mm width and 4 m 79.74 3987.01 M-181 /1000
kg 50.000
length
Paint litre 1.000 250.00 250.00 M-130
Add 1 per cent of cost of steel for welding consumables,
103.66
nuts & bolts and drilling holes
c) Overhead charges @ 18% on
1095.80
(a+b)
d) Contractor's profit @ 10% on
718.36
(a+b+c)
Rate per barricade = a+b+c+d 7901.93
say 7902.00
8.44 B With wooden components
CHAPTER-8
TRAFFIC SIGNS, MARKINGS & OTHER ROAD APPURTENANCES
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
Unit = each
Taking output = one drum delineator
a) Labour
Mate day 0.020 370.00 7.40 L-12
Mazdoor day 0.250 360.00 90.00 L-13
Painter day 0.250 400.00 100.00 L-18
b) Material
Steel drum 300 mm dia 1.2 m high/empty bitumen 0.00 0.00 M-173
each 1.000
drum
CHAPTER-8
TRAFFIC SIGNS, MARKINGS & OTHER ROAD APPURTENANCES
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
Paint litre 0.500 250.00 125.00 M-130
c) Overhead charges @ 18% on
58.03
(a+b)
d) Contractor's profit @ 10% on
38.04
(a+b+c)
Rate per drum delineator = a+b+c+d 418.48
say 418.00
suggesti
8.46 Water Filled Barricades Work zone sheeting
ve
Unit = each
Taking output = one drum delineator
a) Labour
Mate day 0.020 370.00 7.40 L-12
Mazdoor day 0.250 360.00 90.00 L-13
b) Material
Water Filled Barricades Work zone sheeting each 1.000 0.00 0.00 M-238
c) Overhead charges @ 18% on
17.53
(a+b)
d) Contractor's profit @ 10% on
11.49
(a+b+c)
Rate per drum delineator = a+b+c+d 126.43
say 126.00
suggesti
8.47 Tubular Marker/ Spring post 450 mm
ve
Unit = each
Taking output = one drum delineator
a) Labour
Mate day 0.020 370.00 7.40 L-12
Mazdoor day 0.250 360.00 90.00 L-13
b) Material
Tubular Marker/ Spring post 450 mm each 1.000 0.00 0.00 M-237
c) Overhead charges @ 18% on
17.53
(a+b)
d) Contractor's profit @ 10% on
11.49
(a+b+c)
Rate per drum delineator = a+b+c+d 126.43
say 126.00
suggesti
8.48 Tubular Marker/ Spring post 700 mm
ve
CHAPTER-8
TRAFFIC SIGNS, MARKINGS & OTHER ROAD APPURTENANCES
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks/ Input ref.
(Rs.) Small Project
Specification Project
Solar System with UPS, battery & 12m Pole & Cabinet Set 1.00 0.00 0 M-265
D1 VIDS Camera (including Image Processing unit) Set 1.00 0.00 0 M-266
D5 Solar System with UPS & batteries Set 1.00 0.00 0 M-270
Uninterruptible Power Supply (UPS) For TMC (30 KVA) Set 1.00 0.00 0 M-277
Power Distribution Board (Essential & Critical Supply) Set 1.00 0.00 0 M-278
MOS sensor Equipment (including MOS Controller) Set 1.00 0.00 0.00 M-279
Unit = sqm
Taking output = 0.9
i) Excavation for foundation cum 0.122 131.18
Unit = sqm
Taking output = 1.5
i) Excavation for foundation cum 0.243 131.18
1.25
iii) Painting angle iron post two coats sqm 2.827 62.64
a) Labour (For fixing at site)
Mate day 0.010 370.00
Mazdoor day 0.300 360.00
b) Material
Mild Steel 'L' Angle Back Support Frame 40 x 40 x 5
kg 14.400 79.740
mm
Mild Steel circular pipe 65 NB ,3.2 mm thicknness,
kg 41.112 79.740
3.6 meter height
Aluminium sheeting fixed with encapsulated lens type
sqm 1.500 0.00
reflective sheeting
Add 2 per cent of cost of materials for drilling holes,
nuts, bolts, fabrication etc.
c) Machinery
Tractor-trolley hour 0.020 873.00
d) Overhead charges @ 18% on
###
(a+b+c)
e) Contractor's profit @ 10% on
###
(a+b+c+d)
Cost for 1.5 sqm =I+ii+ii+ a+b+c+d+e ###
Rate per sqm ( for sign having area more than 0.9 sqm)
###
= ( i+ii+iii+a+b+c+d+e)/1.50
say
i) Lettering and arrow marks on sign board to be provided
Note separately as per actual requirement. Rates for these
items have been analysed separately
ii) Rate for excavation, cement concrete M-15 and
painting may be taken from respective chapters
8.7 802 Overhead Signs
d) Machinery
Tractor-trolley hour 1.500 873.00
e) Overhead charges @ 18% on
###
(b+c+d)
f) Contractor's profit @ 10% on
###
(b+c+d+e)
Cost for 20 metre = a+b+c+d+e+f ###
Rate per metre = (a+b+c+d+e+f)/20 ###
say
1.Inspection chamber at both ends is the responsibility of
Note
the agency who is laying the duct. Hence not included.
Unit = Each
Taking output = one traffic sign
i) Excavation for foundation cum 0.122 131.18
7813.00
ii) Cement concrete M15 grade cum 0.122
iii) Painting angle iron post two coats sqm 1.414 62.64 0.076 1.13
a) Labour (For fixing at site)
Mate day 0.010 3460.39
Mazdoor day 0.250 3460.39
b) Material
Mild Steel 'L' Angle Back Support Frame 25 x 25 x
kg 2.200 79.74 IS 808 : 1989
3mm
Mild Steel circular pipe 65 NB ,3.2 mm thicknness,
kg 20.556 79.74 IS 1239 (PART 1)
3.6 meter height
Aluminium sheeting fixed with encapsulated lens type
reflective sheeting of size including lettering and signs as
applicable
Add 2 per cent of cost of angle iron towards cost of
drilling holes, nuts, bolts etc.
(i) 120 cm equilateral triangle sqm 0.624 0.00 0.624
or
( ii ) 90 cm equilateral triangle sqm 0.351 0.00 0.351
or
(iii) 75 cm equilateral triangle sqm 0.244 0.00 0.244
or
(iv) 60 cm equilateral triangle sqm 0.156 0.00 0.156
or
(v) 120 cm circular sqm 1.131 0.00 1.131
or
(vi) 90 cm circular sqm 0.636 0.00 0.636
or
(vii) 75cm circular sqm 0.442 0.00 0.442
or
(viii) 60 cm circular sqm 0.283 0.00 0.283
or
( ix ) 90 cm x 75 cm rectangular sqm 0.675 0.00 0.675
or
(x) 80 mm x 60 mm rectangular sqm 0.480 0.00 0.480
or
(xi) 60 cm x 50 cm rectangular sqm 0.300 0.00 0.300
or
(xii) 60 cm x 45 cm rectangular sqm 0.270 0.00 0.270
or
(xiii ) 60 cm x 60 cm square sqm 0.360 0.00 0.360
or
(xiv) 120 cm high octagon sqm 1.193 0.00 1.193
or
(xv) 90 cm high octagon sqm 0.671 0.00 0.671
or
( xvi ) 75 cm high octagon sqm 0.466 0.00 0.466
CHAPTER-8
TRAFFIC SIGNS, MARKINGS & OTHER ROAD APPURTENANCES
Reference to Quantity
Rate
Sr No MORT&H Description Unit For Small
(Rs.)
Specification Project
d) Overhead charges @ 18% on
###
(a+b+c)
e) Contractor's profit @ 10% on
###
(a+b+c+d)
Rate per traffic sign = ( i+ii+iii+a+b+c+d+e) ###
say
1.Any one area of aluminium sheeting given at (i) to (vii)
Note may be adopted as per site requirement and in
accordance with IRC : 67
2.Rate for excavation, cement concrete M-15 and
painting may be taken from respective chapters
3. The depth of foundation and quantity of cement
concrete in the foundation are indicative. These may be
increased for areas having higher wind velocities like in
coastal areas. This is applicable to all road signs and
directions boards.
Direction and Place Identification Signs upto 0.9 sqm
8.5 801
Size Board.
Unit = sqm
Taking output = 0.9
i) Excavation for foundation cum 0.122 131.18
Unit = sqm
Taking output = 1.5
i) Excavation for foundation cum 0.243 131.18
1.2 1.50
iii) Painting angle iron post two coats sqm 2.827 62.64
a) Labour (For fixing at site)
Mate day 0.010 370.00
Mazdoor day 0.300 360.00
b) Material
Mild Steel 'L' Angle Back Support Frame 40 x 40 x 5
kg 14.400 79.740
mm
Mild Steel circular pipe 65 NB ,3.2 mm thicknness,
kg 41.112 79.740
3.6 meter height
Aluminium sheeting fixed with encapsulated lens type
sqm 1.500 0.00
reflective sheeting
Add 2 per cent of cost of materials for drilling holes,
nuts, bolts, fabrication etc.
c) Machinery
Tractor-trolley hour 0.020 873.00
d) Overhead charges @ 18% on
###
(a+b+c)
e) Contractor's profit @ 10% on
###
(a+b+c+d)
Cost for 1.5 sqm =I+ii+ii+ a+b+c+d+e ###
Rate per sqm ( for sign having area more than 0.9 sqm)
###
= ( i+ii+iii+a+b+c+d+e)/1.50
say
i) Lettering and arrow marks on sign board to be provided
Note separately as per actual requirement. Rates for these
items have been analysed separately
ii) Rate for excavation, cement concrete M-15 and
painting may be taken from respective chapters
8.7 802 Overhead Signs
Unit = Each
Taking output = one traffic sign
i) Excavation for foundation cum 0.122 131.18
7813.00
ii) Cement concrete M15 grade cum 0.122
iii) Painting angle iron post two coats sqm 1.414 62.64
a) Labour (For fixing at site)
Mate day 0.010 3460.39
Mazdoor day 0.250 3460.39
b) Material
Mild Steel 'L' Angle Back Support Frame 25 x 25 x
kg 2.200 79.74
3mm
Mild Steel circular pipe 65 NB ,3.2 mm thicknness,
kg 20.556 79.74
3.6 meter height
Aluminium sheeting fixed with encapsulated lens type
reflective sheeting of size including lettering and signs as
applicable
Add 2 per cent of cost of angle iron towards cost of
drilling holes, nuts, bolts etc.
(i) 120 cm equilateral triangle sqm 0.624 0.00
or
( ii ) 90 cm equilateral triangle sqm 0.351 0.00
or
(iii) 75 cm equilateral triangle sqm 0.244 0.00
or
(iv) 60 cm equilateral triangle sqm 0.156 0.00
or
(v) 120 cm circular sqm 1.131 0.00
or
(vi) 90 cm circular sqm 0.636 0.00
or
(vii) 75cm circular sqm 0.442 0.00
or
(viii) 60 cm circular sqm 0.283 0.00
or
( ix ) 90 cm x 75 cm rectangular sqm 0.675 0.00
or
(x) 80 mm x 60 mm rectangular sqm 0.480 0.00
or
(xi) 60 cm x 50 cm rectangular sqm 0.300 0.00 Cos 45- 1/√2
or
(xii) 60 cm x 45 cm rectangular sqm 0.270 0.00 2.41
or 0.37
(xiii ) 60 cm x 60 cm square sqm 0.360 0.00 0.90
or 0.671
(xiv) 120 cm high octagon sqm 1.193 0.00 1.193
or 0.466
(xv) 90 cm high octagon sqm 0.671 0.00
or
( xvi ) 75 cm high octagon sqm 0.466 0.00
CHAPTER-8
TRAFFIC SIGNS, MARKINGS & OTHER ROAD APPURTENANCES
Reference to Quantity
Rate
Sr No MORT&H Description Unit For Small
(Rs.)
Specification Project
Unit = Each
Taking output = one traffic sign
i) Excavation for foundation cum 0.122 131.18
7813.00
ii) Cement concrete M15 grade cum 0.122
iii) Painting angle iron post two coats sqm 1.414 62.64
a) Labour (For fixing at site)
Mate day 0.010 3460.39
Mazdoor day 0.250 3460.39
b) Material
Mild Steel 'L' Angle Back Support Frame 25 x 25 x
kg 2.200 79.74
3mm
Mild Steel circular pipe 65 NB ,3.2 mm thicknness,
kg 20.556 79.74
3.6 meter height
Aluminium sheeting fixed with encapsulated lens type
reflective sheeting of size including lettering and signs as
applicable
Add 2 per cent of cost of angle iron towards cost of
drilling holes, nuts, bolts etc.
(i) 120 cm equilateral triangle sqm 0.624 0.00
or
( ii ) 90 cm equilateral triangle sqm 0.351 0.00
or
(iii) 75 cm equilateral triangle sqm 0.244 0.00
or
(iv) 60 cm equilateral triangle sqm 0.156 0.00
or
(v) 120 cm circular sqm 1.131 0.00
or
(vi) 90 cm circular sqm 0.636 0.00
or
(vii) 75cm circular sqm 0.442 0.00
or
(viii) 60 cm circular sqm 0.283 0.00
or
( ix ) 90 cm x 75 cm rectangular sqm 0.675 0.00
or
(x) 80 mm x 60 mm rectangular sqm 0.480 0.00
or
(xi) 60 cm x 50 cm rectangular sqm 0.300 0.00
Cos 45- 1/√2
or
(xii) 60 cm x 45 cm rectangular sqm 0.270 0.00
or 0.50 0.31 a
(xiii ) 60 cm x 60 cm square sqm 0.360 0.00 s
or
(xiv) 120 cm high octagon sqm 1.193 0.00
or
(xv) 90 cm high octagon sqm 0.671 0.00
or
( xvi ) 75 cm high octagon sqm 0.466 0.00
CHAPTER-9
CULVERTS & BOX CELL
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks / Input ref.
(Rs.) Small Project
Specification Project
9.01 304 Excavation for Structures
Earth work in excavation of foundation of structures as
per drawing and technical specification, including
setting out, construction of shoring and bracing,
removal of stumps and other deleterious matter,
dressing of sides and bottom and backfilling with
approved material.
I Ordinary soil
Unit = cum
Taking output = 10 cum
A Manual Means
(i) Depth upto 3 m
a) Labour
Mate day 0.14 370.00 51.80 L-12
Mazdoor day 3.50 360.00 1260.00 L-13
Per Cum Basic Cost of Labour, Material & Machinery 131.18
(a+b+c)
b) Overhead charges @ 18% on (a) 236.12
Page 1 of 425
CHAPTER-9
CULVERTS & BOX CELL
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks / Input ref.
(Rs.) Small Project
Specification Project
Note 1. Cost of dewatering may be added where required
upto 20 per cent of labour cost. Assessment for
dewatering shall be made as per site conditions..
B Mechanical Means
Unit = cum
Taking output = 120
a) Labour
Mate day 0.210 370.00 77.70 L-12
Mazdoor day 3.000 360.00 1080.00 L-13
Driller day 2.000 0.00 0.00 L-06
Blaster day 0.250 0.00 0.00 L-03
b) Machinery
Air compressor hour 6.000 585.00 3510.00 P&M-15001
Jack Hammer for drilling holes (@ 4.5 m per hour) hour 24.000 11.00 264.00 P&M-45001
Jack Hammer (consider 5% of the volume for hour 1.024 206.00 210.94 P&M-4001
dressing)
Hydraulic Excavator
Excavator for excavation
(i) 1.2 cum bucket capacity hour 3293.00 P&M-3003
(ii) 1.1 cum bucket capacity hour 2965.00 P&M-3004
(iii) 0.9 cum bucket capacity hour 1.024 2689.00 2753.54 P&M-3005
For loading
(i) 1.2 cum bucket capacity hour 3293.00 P&M-3003
(ii) 1.1 cum bucket capacity hour 2965.00 P&M-3004
Page 4 of 425
CHAPTER-9
CULVERTS & BOX CELL
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks / Input ref.
(Rs.) Small Project
Specification Project
(iii) 0.9 cum bucket capacity hour 3.371 2689.00 9065.14 P&M-3005
Tipper
For transportation considering lead @ 1 km
(i) 18 cum capacity t-km 7.16 P&M-72002
(ii) 14 cum capacity t-km 8.12 P&M-73002
(iii) 10 cum capacity t-km 180.000 10.03 1805.40 P&M-74002
For loading & unloading time
(i) 18 cum capacity hour 2746.00 P&M-6001
(ii) 14 cum capacity hour 2435.00 P&M-6002
(iii) 10 cum capacity hour 3.371 2166.00 7302.00 P&M-6003
c) Materials
Small dia.Explosive at 0.40 kg / cum for 120 cum kg 48.000 0.00 0.00 M-215
( 120 x 0.40 )Explosive at 0.20 kg / cum for
secondary blast @ 5%of the total volume ( 120 x
0.2x5% )
Electric detonators at 1 per hole for main blast no 69.000 0.00 0.00 M-217
holes (21x3+20*2)=103 nos
Ordinary detonators @ 1 per hole for 10 secondary no 7.000 0.00 0.00 M-216
holes( required for 5% of the total quantity @ 0.6 m
per hole for I cum )
Detonating fuse coil m 213.000 0.00 0.00 M-218
d) Overhead charges @ 18% on 4692.37
(a+b+c)
e) Contractor's profit @ 10% on 3076.11
(a+b+c+d)
Cost for 120 cum = a+b+c+d+e 33837.20
Rate per cum = (a+b+c+d+e)/120 281.98
say 282.00
b) Machinery
Tractor-trolley for transportation hour 2.00 873.00 1746.00 P&M-12001
c) Overhead charges @ 18% on 516.67
(a+b)
Page 6 of 425
CHAPTER-9
CULVERTS & BOX CELL
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks / Input ref.
(Rs.) Small Project
Specification Project
d) Contractor's profit @ 10% on 338.71
(a+b+c)
Page 7 of 425
CHAPTER-9
CULVERTS & BOX CELL
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks / Input ref.
(Rs.) Small Project
Specification Project
Cost for 6 cum = a+b+c+d 3725.78
Rate per cum = (a+b+c+d)/6 620.96
say 621.00
9.2 304 Filling Annular Space Around Footing in Rock
Unit = cum
Taking out put = 1 cum
PCC-15 nominal mix. Rate may be taken as per item
9.14.
9.3 304 Sand Filling in Foundation Trenches as per Drawing &
Technical Specification
Unit = cum
Taking output = 100
a) Labour
Mate day 0.04 370.00 14.80 L-12
Mazdoor day 1.00 330.00 330.00 L-13
b) Machinery
Water tanker (speed @ 20km/hr and return speed
@ 30 km/hr and spreading @ 30 mins per trip )
Unit = cum
Taking output = 15
a) Labour
Mate day 0.32 370.00 118.40 L-12
Mason day 1.00 480.00 480.00 L-11
Mazdoor day 7.00 330.00 2310.00 L-13
b) Material
Plain cement concrete 1:3:6 nominal mix using cum 15.00 6503.50 97552.48 Sub-Analysis of
batching plant (Rate as sub-analysis) Concrete - 19.02
Water KL 3.24 50.00 162.00 M-191
c) Machinery
Plate Compactor hour 1.00 569.00 569.00 P&M-46001
Water tanker (speed @ 20km/hr and return speed
@ 30 km/hr and spreading @ 30 mins per trip )
Page 8 of 425
CHAPTER-9
CULVERTS & BOX CELL
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks / Input ref.
(Rs.) Small Project
Specification Project
Note Vibrator is a part of minor T & P which is already
included in overhead charges of the contractor.
9.5 1300 Brick Masonry Work in Cement Mortar 1:3 in
Foundation complete excluding Pointing and
Plastering, as per Drawing and Technical
Specifications.
Unit = cum
Taking output = 5
a) Material
Bricks Ist class each 2500.00 6.40 16000.00 M-079
Cement mortar 1:3 (Rate as sub-analysis) cum 1.20 7222.00 8666.40 Sub-Analysis of
Concrete - 19.01
(A)
Water for curing KL 2.42 50.00 120.75 M-191
b) Labour
Mate day 0.48 370.00 177.60 L-12
Mason day 4.00 480.00 1920.00 L-11
Mazdoor day 8.00 330.00 2640.00 L-13
c) Machinery
Water tanker (speed @ 20km/hr and return speed
@ 30 km/hr and spreading @ 30 mins per trip )
Page 9 of 425
CHAPTER-9
CULVERTS & BOX CELL
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks / Input ref.
(Rs.) Small Project
Specification Project
Mazdoor day 0.90 360.00 324.00 L-13
Total Material and Labour = (a+b) say 6714.00
Sub- (D) Cement Mortar1:6 (1cement :6 sand)
analysis
(Addl.)
Unit = 1 cum
Taking output = 1 cum
a) Materials
Cement tonne 0.29 6200.00 1785.60 M-081
Sand cum 1.34 3460.39 4627.04 M-005
b) Labour
Mate day 0.04 370.00 14.80 L-12
Mazdoor day 0.90 360.00 324.00 L-13
Total Material and Labour = (a+b) say 6751.00
9.7 1400 Stone Masonry Work in Cement Mortar 1:3 in
Foundation complete as per Drawing and Technical
Specifications.
Unit = cum
Taking output = 5
1405.4 (A) Square Rubble Coursed Rubble Masonry (first sort)
a) Material
Stone cum 5.50 0.00 0.00 M-170 7.79
Through and bond stone each 35.00 0.00 0.00 M-184 1.558
(35no.x0.24mx0.24mx0.39m = 0.79 cu.m)
Cement mortar 1:3 (Rate as sub-analysis) cum 1.50 7167.95 10751.93 Sub-Analysis of
Concrete - 19.01
(A)
b) Labour
Mate day 0.66 370.00 244.20 L-12
Mason day 7.50 615.00 4612.50 L-11
Mazdoor day 9.00 360.00 3240.00 L-13
c) Overhead charges @ 18% on 3392.75
(a+b)
d) Contractor's profit @ 10% on 2224.14
(a+b+c)
Cost for 5 cum = a+b+c+d 24465.52
Rate per cum (a+b+c+d)/5 4893.10
say 4893.00
1405.3 (B) Random Rubble Masonry
( coursed/uncoursed )
Unit = cum
Taking output = 5
a) Material
Stone cum 5.50 0.00 0.00 M-147
Through and bond stone each 35.00 0.00 0.00 M-184
(35nos.x0.24mx0.24mx0.39m = 0.79 cu.m)
Cement mortar 1:3 (Rate as in sub-analysis) cum 1.55 7167.95 11110.32 Sub-Analysis of
Concrete - 19.01
(A)
b) Labour
Mate day 0.62 370.00 229.40 L-12
Mason day 6.00 615.00 3690.00 L-11
Mazdoor day 9.00 360.00 3240.00 L-13
c) Overhead charges @ 18% on 3288.55
(a+b)
d) Contractor's profit @ 10% on 2155.83
(a+b+c)
Cost for 5 cum = a+b+c+d 23714.10
Rate per cum (a+b+c+d)/5 4742.82
say 4743.00
Note The labour already considered in cement mortar has
been taken into account while proposing labour for
masonry works.
Page 10 of 425
CHAPTER-9
CULVERTS & BOX CELL
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks / Input ref.
(Rs.) Small Project
Specification Project
9.8 1300 & Brick masonry work in 1:3 in sub-structure complete
2200 excluding pointing and plastering, as per drawing and
Technical Specifications
Unit = cum
Taking output = 1
a) Material
Bricks Ist class each 500.00 0.00 0.00 M-079
Cement mortar 1:3 (Rate as from sub-analysis) cum 0.24 7167.95 1720.31 Sub-Analysis of
Concrete - 19.01
(A)
Water for curing KL 0.48 50.00 24.15 M-191
b) Labour
Mate day 0.06 370.00 22.20 L-12
Mason day 0.80 615.00 492.00 L-11
Mazdoor day 0.80 360.00 288.00 L-13
Add for scaffolding @ 5 per cent of cost of material 127.33
and labour
c) Machinery
Water tanker (speed @ 20km/hr and return speed
@ 30 km/hr and spreading @ 30 mins per trip )
Page 11 of 425
CHAPTER-9
CULVERTS & BOX CELL
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks / Input ref.
(Rs.) Small Project
Specification Project
9.12 2900 Laying Reinforced Cement Concrete Pipe NP4 /
Prestressed Concrete Pipe on First Class Bedding in
Single Row .
Laying Reinforced cement concrete pipe
NP4/prestressed concrete pipe for culverts on first
class bedding of granular material in single row
including fixing collar with cement mortar 1:2 but
excluding excavation, protection works, backfilling,
concrete and masonry works in head walls and
parapets .
Unit = metre
Taking output = 12.5 metres ( 5 pipes of 2.5 m length
each )
A 1000 mm dia
a) Labour
Mate day 0.100 370.00 37.00 L-12
Mason day 0.500 480.00 240.00 L-11
Mazdoor day 2.000 330.00 660.00 L-13
b) Material
Sand at site cum 0.070 3507.00 245.49 M-005
Cement at site tonne 0.050 6200.00 310.00 M-081
RCC pipe NP-4 /prestressed concrete pipe metre 7.500 3740.00 28050.00 M-148
including collar at site
Granular material passing 5.6 mm sieve for bedding cum 4.500 3601.00 16204.50 M-009
c) Machinery
Light Crane 3 tonnes capacity for placing of Hume hour 2.08 1032.00 2150.00 P&M-63001
pipe
d) Overhead charges @ 12% on 5635.20
(a+b+c)
e) Contractor's profit @ 10% on 5353.22
(a+b+c+d)
Cost for 12.5 metres = a+b+c+d 58885.41
Rate per metre = (a+b+c+d)/12.5 4710.83
say 4711.00
Note 1. In case of cement craddle bedding, quantity of PCC
M15 is to be calculated as per design and priced
separately and added .
2. The rate analysis does not include excavation,
cement /masonry works in head walls, backfilling,
protection works and parapet walls. The same are to
be calculated as per approved design and drawings
and priced separately on rates available under
respective sections
Case II PCC Grade M15 using batching plant & manual placing
Unit = cum
Taking output = 15
a) Material
Per Cum Basic Cost (Rate as in sub-analysis) cum 15.00 7326.78 109901.71 Sub-Analysis of
Concrete - 19.03
Water for curing Kl 7.88 50.00 393.75 M-191
b) Labour
For pouring and placing
Mate day 0.38 370.00 140.60 L-12
Mason day 1.50 615.00 922.50 L-11
Mazdoor day 8.00 360.00 2880.00 L-13
c) Machinery
Transit truck agitator
For transportation (6 cum Capacity) tonne-km 37.5 x L1 12.77 478.88 P&M-76001
For unloading hour 0.83 2299.00 1915.83 P&M-34001
Water tanker ( speed @ 20km/hr and return speed
@ 30 km/hr and 30 mins for unloading )
(i) 16 KL capacity hour 1440.00 P&M-11001
(ii) 12 KL capacity hour 1270.00 P&M-11002
Page 12 of 425
CHAPTER-9
CULVERTS & BOX CELL
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks / Input ref.
(Rs.) Small Project
Specification Project
(iii) 6 KL capacity hour 1.02 967.00 987.15 P&M-11003
Per Cum Basic Cost of Labour, Material & Machinery 7842.00
(a+b+c)
d) Formwork @ 10 per cent on cost of concrete i.e. 11762.04
cost of material, labour and machinery
Page 14 of 425
CHAPTER-9
CULVERTS & BOX CELL
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks / Input ref.
(Rs.) Small Project
Specification Project
Mazdoor day 9.00 360.00 3240.00 L-13
c) Machinery
Transit truck agitator
For transportation (6 cum Capacity) tonne-km 37.5 x L1 12.77 478.88 P&M-76001
For unloading hour 0.83 2299.00 1915.83 P&M-34001
Water tanker ( speed @ 20km/hr and return speed
@ 30 km/hr and 30 mins for unloading )
(i) 16 KL capacity hour 1440.00 P&M-11001
(ii) 12 KL capacity hour 1270.00 P&M-11002
(iii) 6 KL capacity hour 1.02 967.00 987.15 P&M-11003
Per Cum Basic Cost of Labour, Material & Machinery 8157.00
(a+b+c)
d) Formwork @ 10 per cent on cost of concrete i.e. 12234.36
cost of material, labour and machinery
Page 15 of 425
CHAPTER-9
CULVERTS & BOX CELL
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks / Input ref.
(Rs.) Small Project
Specification Project
Water for curing Kl 7.88 50.00 393.75 M-191
b) Labour
For pouring and placing
Mate day 0.38 370.00 140.60 L-12
Mason day 1.50 615.00 922.50 L-11
Mazdoor day 8.00 360.00 2880.00 L-13
c) Machinery
Transit truck agitator
For transportation (6 cum Capacity) tonne-km 37.5 x L1 12.77 478.88 P&M-76001
For unloading hour 0.83 2299.00 1915.83 P&M-34001
Water tanker ( speed @ 20km/hr and return speed
@ 30 km/hr and 30 mins for unloading )
(i) 16 KL capacity hour 1440.00 P&M-11001
(ii) 12 KL capacity hour 1270.00 P&M-11002
(iii) 6 KL capacity hour 1.02 967.00 987.15 P&M-11003
Per Cum Basic Cost of Labour, Material & Machinery 8528.00
(a+b+c)
d) Formwork @ 10 per cent on cost of concrete i.e. 12790.75
cost of material, labour and machinery
Page 18 of 425
CHAPTER-9
CULVERTS & BOX CELL
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks / Input ref.
(Rs.) Small Project
Specification Project
e) Overhead charges @ 18% on 50231.70
(a+b+c+d)
f) Contractor's profit @ 10% on 32929.67
(a+b+c+d+e)
Cost for 30 cum = a+b+c+d+e+f 362226.37
Rate per cum = (a+b+c+d+e+f)/30 12074.21
say 12074.00
9.14 G RCC Grade M30
Case II RCC Grade M30 using batching plant transit mixer &
manual placing
Unit = cum
Taking output = 15
a) Material
Per Cum Basic Cost (Rate as in sub-analysis) cum 15.00 8208.31 123124.63 Sub-Analysis of
Concrete - 19.09
Water for curing Kl 7.88 50.00 393.75 M-191
b) Labour
For pouring and placing
Mate day 0.42 370.00 155.40 L-12
Mason day 1.50 480.00 720.00 L-11
Mazdoor day 9.00 330.00 2970.00 L-13
c) Machinery
Transit truck agitator
For transportation (6 cum Capacity) tonne-km 37.5 x L1 12.77 478.88 P&M-76001
For unloading hour 0.83 2299.00 1915.83 P&M-34001
Water tanker ( speed @ 20km/hr and return speed
@ 30 km/hr and 30 mins for unloading )
(i) 16 KL capacity hour 1440.00 P&M-11001
(ii) 12 KL capacity hour 1270.00 P&M-11002
(iii) 6 KL capacity hour 1.02 967.00 987.15 P&M-11003
Per Cum Basic Cost of Labour, Material & Machinery 8717.00
(a+b+c)
d) Formwork @ 10 per cent on cost of concrete i.e. 13074.56
cost of material, labour and machinery
Page 20 of 425
CHAPTER-9
CULVERTS & BOX CELL
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small Remarks / Input ref.
(Rs.) Small Project
Specification Project
Water tanker ( speed @ 20km/hr and return speed
@ 30 km/hr and 30 mins for unloading )
(i) 16 KL capacity hour 1440.00 P&M-11001
(ii) 12 KL capacity hour 1270.00 P&M-11002
(iii) 6 KL capacity hour 2.04 967.00 1974.29 P&M-11003
Per Cum Basic Cost of Labour, Material & Machinery 8824.00
(a+b+c)
d) Formwork @ 10 per cent on cost of concrete i.e. 26470.95
cost of material, labour and machinery
Page 21 of 425
CHAPTER-13
SUB-STRUCTURE
Amount
Reference to Quantity
Rate (Rs.)
Sr No MORT&H Description Unit For Small
(Rs.) Small Project
Specification Project
15.14 2706 Providing weep holes in Brick masonry/Plain/
& Reinforced concrete abutment, wing wall/
2200 return wall with 100 mm dia AC pipe,
extending through the full width of the
structure with slope of 1V :20H towards
drawing foce. Complete as per drawing and
Technical Specifications
Unit = Nos.
Taking output = 30 Nos.
a) Material
AC pipe 100 mm dia. (including wastage metre 31.50 750.00 23625.00
@ 5 per cent )
Average length of weep hole is taken as one
metre for the purpose of estimating.
MS clamp each. 30.00 200.00 6000.00
collar for AC pipe (average) taking 10% each. 10.00 75.00 750.00
of above pipe rate
Cement mortar 1:3 (Rate as sub- cum 0.05 7222.00 361.10
analysis)
b) Labour
Mate day 0.03 370.00 11.10
Mason day 0.50 480.00 240.00
Mazdoor day 0.25 330.00 82.50
c) Overhead charges @ 12% on (a+b) 3728.36
Unit = 1 cum
Taking output = 1 cum
a) Material
Cement concrete M30 Grade Refer relevant item of cum 1.00 8498.00 8498.00 Item No. - 15.12
concrete in Item 15.12 excluding formwork C
HYSD bar reinforcement Rate as per item No tonne 0.075 82413.00 6180.97 Item No. - 15.13
15.13(Excluding OH & CP)
b) Labour
Mazdoor for cleaning deck slab concrete surface. day 0.15 330.00 49.50 L-13
c) Overhead charges @ 12% on 1767.42
(a+b+c)
d) Contractor's profit @ 10% on 1649.59
(a+b+c+d)
Rate per cum (a+b+c+d) 18145.48
Add Royality (per cum)
Aggregate 160.00
Coarse Sand 75.00
Rate per cum (including royalty) say 18380.48
CHAPTER-14
SUPER-STRUCTURE
Amount
Reference to Quantity
Rate (Rs.) Remarks/ Input
Sr No MORT&H Description Unit For Small (Rs.) Small Project ref.
Specification Project
14.1 E RCC/PSC Grade M-40
14.1E Using Batching Plant, Transit Mixer and Concrete
Pump
Unit = cum
Taking output = 120 cum 120
a) Material
Per Cum Basic Cost (Rate as in sub-analysis) cum 120.00 8575.44 1029053.02 Sub-Analysis of
Concrete - 19.12
Note Vibrator is a part of minor T & P which is already included in overhead charges of the
contractor.
19.03 Plain/Reinforced Cement Concrete complete as per Drawing and Technical
Specifications.
PCC Grade M15 Using Batching Plant
Unit = cum
Taking output = 360 Cum
a) Material
Cement tonne 99.00 6200.00 613800.00 M-081
Coarse sand cum 162.000 3536.00 572832.00 M-004
40 mm Aggregate cum 194.400 4401.00 855554.40 M-054
20 mm Aggregate cum 97.200 4351.00 422917.20 M-052
10 mm Aggregate cum 32.400 4001.00 129632.40 M-050
Cost of water (Water/Cement Ratio - 0.4) KL 39.600 50.00 1980.00 M-191
b) Labour
Mate day 0.16 370.00 59.20 L-12
Skilled Mazdoor day 1.00 350.00 350.00 L-15
Mazdoor (Semi Skilled) day 3.00 330.00 990.00 L-13 ###
c) Machinery
Batching Plant of capacity 120 cum/hour hour 4.00 3909.00 15636.00 P&M-19002
Generator 250 KVA hour 4.00 4344.00 17376.00 P&M-22004
Loader 3.1 cum capacity hour 8.679 4076.00 35373.86 P&M-5001
Transit truck agitator
For loading & Unloding time hour 4.000 2299.000 9196.00 P&M-34001
Per Cum Basic Cost of Labour, Material & Machinery (a+b+c)/360 7432.49
19.04 PCC Grade M20 Using Batching Plant
Unit = cum
Taking output = 360 Cum
a) Material
Cement tonne 123.84 6200.00 767808.00 M-081 ###
Coarse sand cum 162.000 3447.00 558414.00 M-004 ###
40 mm Aggregate cum 129.600 4347.00 563371.20 M-054
20 mm Aggregate cum 129.600 4347.00 563371.20 M-052
10 mm Aggregate cum 64.800 3997.00 259005.60 M-050
Cost of water (Water/Cement Ratio - 0.4) KL 49.536 50.00 2476.80 M-191
b) Labour
Mate day 0.16 370.00 59.20 L-12
Skilled Mazdoor day 1.00 350.00 350.00 L-15
Mazdoor (Semi Skilled) day 3.00 330.00 990.00 L-13 ###
c) Machinery
Batching Plant of capacity 120 cum/hour hour 4.00 3909.00 15636.00 P&M-19002
Generator 250 KVA hour 4.00 4344.00 17376.00 P&M-22004
Loader 3.1 cum capacity hour 8.679 4076.00 35373.86 P&M-5001
Transit truck agitator
For loading & Unloding time hour 4.000 2299.000 9196.00 P&M-34001
Per Cum Basic Cost of Labour, Material & Machinery (a+b+c)/360 7759.52
Referenc
e to
Rate Amount
Sr No MORT&H Description Unit Quantity Remarks/ Input ref.)
(Rs.) (Rs.)
Specificati
on
19.05 RCC Grade M20 Using Batching Plant
Unit : cum
Taking output = 360 Cum
a) Material
Cement tonne 124.98 6200.00 774876.00 M-081 ###
Coarse Sand cum 162.00 3460.39 560583.33 M-004 ###
20 mm Aggregate cum 194.40 4325.39 840855.99 M-052 ###
10 mm Aggregate cum 129.60 3735.39 484106.66 M-050
Cost of water KL 49.99 50.00 2499.60 M-191
b) Labour
Mate day 0.16 370.00 59.20 L-12
Skilled Mazdoor day 1.00 360.00 360.00 L-15
Mazdoor day 3.00 360.00 1080.00 L-13 ###
c) Machinery
Batching Plant of capacity 120 cum/hour hour 4.00 3909.00 15636.00 P&M-19002
Generator 250 KVA hour 4.00 4344.00 17376.00 P&M-22004
Loader 3.1 cum capacity hour 8.679 4076.00 35373.86 P&M-5001
Transit truck agitator
For loading & Unloding time hour 4.000 2299.000 9196.00 P&M-34001
Per Cum Basic Cost of Labour, Material & Machinery (a+b+c)/360 7616.67
19.06 PCC Grade M25 Using Batching Plant
Unit : cum
Taking output = 360 Cum
a) Material
Cement tonne 143.85 6200.00 891870.00 M-081
Coarse sand cum 162.00 3447.00 558414.00 M-004
40 mm Aggregate cum 129.60 4347.00 563371.20 M-054
20 mm Aggregate cum 129.60 4347.00 563371.20 M-052
10 mm Aggregate cum 64.80 3997.00 259005.60 M-050
Cost of water KL 57.54 50.00 2877.00 M-191
b) Labour
Mate day 0.16 370.00 59.20 L-12
Skilled Mazdoor day 1.00 350.00 350.00 L-15
Mazdoor (Semi Skilled) day 3.00 330.00 990.00 L-13 ###
c) Machinery
Batching Plant of capacity 120 cum/hour hour 4.00 3909.00 15636.00 P&M-19002
Generator 250 KVA hour 4.00 4344.00 17376.00 P&M-22004
Loader 3.1 cum capacity hour 8.68 4076.00 35373.86 P&M-5001
Transit truck agitator
For loading & Unloding time hour 4.000 2299.000 9196.00 P&M-34001
Per Cum Basic Cost of Labour, Material & Machinery (a+b+c)/360 8105.25
21.07 RCC Grade M25 Using Batching Plant
Unit: cum
Taking output = 360 Cum
a) Material
Cement tonne 145.14 6200.00 899868.00 M-081
Coarse sand cum 162.00 3447.00 558414.00 M-004
20 mm Aggregate cum 194.40 4347.00 845056.80 M-052
10 mm Aggregate cum 129.60 3997.00 518011.20 M-050
Admixture @ 0.2 % of Cement Kg 290.280 100.00 29028.00 M-182
Cost of water KL 58.06 50.00 2902.80 M-191
b) Labour
Mate day 0.16 370.00 59.20 L-12
Skilled Mazdoor day 1.00 350.00 350.00 L-15
Mazdoor day 3.00 330.00 990.00 L-13 ###
c) Machinery
Batching Plant of capacity 120 cum/hour hour 4.00 3909.00 15636.00 P&M-19002
Generator 250 KVA hour 4.00 4344.00 17376.00 P&M-22004
Loader 3.1 cum capacity hour 8.68 4076.00 35373.86 P&M-5001
Transit truck agitator
For loading & Unloding time hour 4.000 2299.000 9196.00 P&M-34001
Per Cum Basic Cost of Labour, Material & Machinery (a+b+c)/360 8145.17
Referenc
e to
Rate Amount
Sr No MORT&H Description Unit Quantity Remarks/ Input ref.)
(Rs.) (Rs.)
Specificati
on
19.08 PCC Grade M30 Using Batching Plant
Unit : cum
Taking output = 360 Cum
a) Material
Cement tonne 145.80 6200.00 903960.00 M-081
Coarse sand cum 162.00 3460.39 560583.33 M-004
40 mm Aggregate cum 129.60 4325.39 560570.66 M-054
20 mm Aggregate cum 129.60 4325.39 560570.66 M-052
10 mm Aggregate cum 64.80 3735.39 242053.33 M-050
Cost of water KL 58.32 50.00 2916.00 M-191
b) Labour
Mate day 0.16 370.00 59.20 L-12
Skilled Mazdoor day 1.00 360.00 360.00 L-15
Mazdoor day 3.00 360.00 1080.00 L-13 ###
c) Machinery
Batching Plant of capacity 120 cum/hour hour 4.00 3909.00 15636.00 P&M-19002
Generator 250 KVA hour 4.00 4344.00 17376.00 P&M-22004
Loader 3.1 cum capacity hour 8.68 4076.00 35373.86 P&M-5001
Transit truck agitator
For loading & Unloding time hour 4.000 2299.000 9196.00 P&M-34001
Per Cum Basic Cost of Labour, Material & Machinery (a+b+c)/360 8082.60
19.09 RCC Grade M30 Using Batching Plant
Unit = cum
Taking output = 360 Cum
a) Material
Cement tonne 146.40 6200.00 907680.00 M-081 ###
Coarse sand cum 162.00 3447.00 558414.00 M-004 ###
20 mm Aggregate cum 194.40 4347.00 845056.80 M-052
10 mm Aggregate cum 129.60 3997.00 518011.20 M-050
Admixture @ 0.3 % of Cement Kg 439.200 100.00 43920.00 M-182
Cost of water KL 58.56 50.00 2928.00 M-191
b) Labour
Mate day 0.16 370.00 59.20 L-12
Skilled Mazdoor day 1.00 350.00 350.00 L-15
Mazdoor (Semi Skilled) day 3.00 330.00 990.00 L-13 ###
c) Machinery
Batching Plant of capacity 120 cum/hour hour 4.00 3909.00 15636.00 P&M-19002
Generator 250 KVA hour 4.00 4344.00 17376.00 P&M-22004
Loader 3.1 cum capacity hour 8.679 4076.00 35373.86 P&M-5001
Transit truck agitator
For loading & Unloding time hour 4.000 2299.000 9196.00 P&M-34001
Per Cum Basic Cost of Labour, Material & Machinery (a+b+c)/360 8208.31
19.10 PCC Grade M35 Using Batching Plant
Unit : cum
Taking output = 360 Cum
a) Material
Cement tonne 150.84 6200.00 935208.00 M-081
Coarse sand cum 162.00 3460.39 560583.33 M-004
20 mm Aggregate cum 194.40 4325.39 840855.99 M-052
10 mm Aggregate cum 129.60 3735.39 484106.66 M-050
Admixture @ 0.3 % of Cement Kg 452.520 100.00 45252.00 M-182
Cost of water KL 60.34 50.00 3016.80 M-191
b) Labour
Mate day 0.16 370.00 3016.80 L-12
Skilled Mazdoor day 1.00 360.00 360.00 L-15
Mazdoor day 3.00 360.00 1080.00 L-13 ###
c) Machinery
Batching Plant of capacity 120 cum/hour hour 4.00 3909.00 15636.00 P&M-19002
Generator 250 KVA hour 4.00 4344.00 17376.00 P&M-22004
Loader 3.1 cum capacity hour 8.68 4076.00 35373.86 P&M-5001
Transit truck agitator
For loading & Unloding time hour 4.000 2299.000 9196.00 P&M-34001
Per Cum Basic Cost of Labour, Material & Machinery (a+b+c)/360 8197.39
Referenc
e to
Rate Amount
Sr No MORT&H Description Unit Quantity Remarks/ Input ref.)
(Rs.) (Rs.)
Specificati
on
19.11 RCC Grade M35 Using Batching Plant
Unit ; cum
Taking output = 360 Cum
a) Material
Cement tonne 151.92 6200.00 941904.00 M-081
Coarse sand cum 162.00 3460.39 560583.33 M-004
20 mm Aggregate cum 194.40 4325.39 840855.99 M-052
10 mm Aggregate cum 129.60 3735.39 484106.66 M-050
Admixture @ 0.4 % of Cement Kg 607.680 100.00 60768.00 M-182
Cost of water KL 60.77 50.00 3038.40 M-191
b) Labour
Mate day 0.16 370.00 59.20 L-12
Skilled Mazdoor day 1.00 360.00 360.00 L-15
Mazdoor (Semi Skilled) day 3.00 322.00 966.00 L-13 ###
c) Machinery
Batching Plant of capacity 120 cum/hour hour 4.00 3909.00 15636.00 P&M-19002
Generator 250 KVA hour 4.00 4344.00 17376.00 P&M-22004
Loader 3.1 cum capacity hour 8.68 4076.00 35373.86 P&M-5001
Transit truck agitator
For loading & Unloding time hour 4.000 2299.000 9196.00 P&M-34001
Per Cum Basic Cost of Labour, Material & Machinery (a+b+c)/360 8250.62
8.0 M
4.61M
4.31M
3.75 M
PQC 28 cm.
G.L. G.L.
DLC 15 cm.
GSB 15 cm.
Analysis of Rate
Ref. to
Remarks/ Input
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
ref.
Spec.
1 2 3 4 5 6 7 8 9
2.3 201 Clearing and Grubbing Road Land .
Clearing and grubbing road land including uprooting rank
vegetation, grass, bushes, shrubs, saplings and trees girth up
to 300 mm, removal of stumps of trees cut earlier and disposal
of unserviceable materials and stacking of serviceable material
to be used or auctioned, up to a lead of 1000 metres including
removal and disposal of top organic soil not exceeding 150 mm
in thickness.
Page 1 of 425
Analysis of Rate
Ref. to
Remarks/ Input
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
ref.
Spec.
1 2 3 4 5 6 7 8 9
3.19 Case-II :Compacting original ground supporting embankment
Unit = cum
Taking output = 600 cum
a) Labour
Mate day 0.080 370.00 29.60 L-12
Mazdoor day 2.000 330.00 660.00 L-14
b) Machinery
Tractor with ripper attachment hour 6.000 873.00 5238.00 P&M-055
Vibratory road roller 8-10 tonne capacity hour 7.500 1888.60 14164.50 P&M-059
Water tanker6 KL capacity hour 4.000 380.00 1520.00 P&M-060
c) Material
Cost of water KL 24.000 50.00 1200.00 M-189
c) Overhead charges @8% 1824.97
e) Contractor's profit @10% 2463.71
Cost for 600 cum = (a+b+c+d+e) 27100.77
Rate per sqm = (a+b+c+d+e)/600 45.17
say 45.20
Page 2 of 425
Analysis of Rate
Ref. to
Remarks/ Input
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
ref.
Spec.
1 2 3 4 5 6 7 8 9
3.16 305 Construction of Embankment with Material obtained from
Borrowpits
Construction of embankment with approved material obtained
from borrow pits with all lifts and leads, transporting to site,
spreading, grading to required slope and compacting to meet
requirement of table 300-2.
Unit = cum
Taking output = 100 cum
a) Labour
Mate day 0.040 370.00 14.80 L-12
Mazdoor day 1.000 330.00 330.00 L-14
b) Machinery
Hydraulic Excavator1 cum bucket capacity @ 60 cum per hour 1.670 2689.00 4490.63 P&M-04
hour
Tipper 10 tonne capacity tonne.km 160 x1 10.03 1604.80 P&M-047
Page 3 of 425
Analysis of Rate
Ref. to
Remarks/ Input
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
ref.
Spec.
1 2 3 4 5 6 7 8 9
3.18 305 Construction of Subgrade and Earthen Shoulder.
Construction of embankment with approved material obtained
from borrow pits with all lifts and leads, transporting to site,
spreading, grading to required slope and compacting to meet
requirement of table 300-2.
Unit = cum
Taking output = 100 cum
a) Labour
Mate day 0.040 370.00 14.80 L-12
Mazdoor day 1.000 330.00 330.00 L-13
b) Machinery
Hydraulic Excavator1 cum bucket capacity @ 60 cum per hour 1.670 2689.00 4490.63 P&M-04
hour
Tipper 10 tonne capacity tonne.km 175*1 10.03 1755.25 P&M-06
Page 4 of 425
Analysis of Rate
Ref. to
Remarks/ Input
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
ref.
Spec.
1 2 3 4 5 6 7 8 9
4.1 401 Granular Sub - Base with close Graded Material (Table:- 400-1)
Unit = cum
Taking output = 300 cum
a) Labour
Mate day 0.480 370.00 177.60 L-12
Mazdoor skilled day 2.000 350.00 700.00 L-13
Mazdoor unskilled day 10.000 285.00 2850.00 L-14
b) Machinery
Motor Grader 110 HP @ 50 cum hour 6.000 4747.00 28482.00 P&M-03
Vibratory roller 8 -10 tonne hour 6.000 2440.00 14640.00 P&M-07
Tractor - Rotavator hour 12.000 492.10 5905.20 P&M-54-11
Water tanker 6 KL capacity hour 3.000 967.00 2901.00 L-49
c) Material
Close graded Granular sub-base Material as per table 400-1
Page 5 of 425
Analysis of Rate
Ref. to
Remarks/ Input
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
ref.
Spec.
1 2 3 4 5 6 7 8 9
4.12 406 Wet Mix Macadam
Providing, laying, spreading and compacting graded stone
aggregate to wet mix macadam specification including
premixing the Material with water at OMC in mechanical mix
plant carriage of mixed Material by tipper to site, laying in
uniform layers with paver in sub- base / base course on well
prepared surface and compacting with vibratory roller to
achieve the desired density.
Unit = cum
Taking output = 225 cum (495 tonnes)
a) Labour
Mate day 0.480 370.00 177.60 L-12
Mazdoor skilled day 2.000 350.00 700.00 L-15
Mazdoor day 10.000 285.00 2850.00 L-13
b) Machinery
Wet mix plant of 75 tonne hourly capacity hour 6.600 1476.30 9743.58 P&M-094
Electric generator 125 KVA hour 6.000 855.00 5130.00 P&M-018
Front end loader 1 cum capacity hour 6.000 988.00 5928.00 P&M-017
Paver finisher hour 6.000 1195.10 7170.60 P&M-035
Vibratory roller 8 - 10 tonne hour 6x0.65 1888.60 7365.54 P&M-059
or
Smooth 3 wheeled steel roller @ 8-10 tonnes. hour 12.000
Water tanker 6 KL capacity hour 3.000 380.00 1140.00 L-49
Tipper tonne.km 495 x 5.50 3.31 9000.59 Lead =input km
& P&M-058
Page 6 of 425
Analysis of Rate
Ref. to
Remarks/ Input
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
ref.
Spec.
1 2 3 4 5 6 7 8 9
5.1 502 Prime Coat
Providing and applying primer coat with bitumen emulsion on
prepared surface of granular Base including clearing of road
surface and spraying primer at the rate of 0.60 kg/sqm using
mechanical means.
Unit = sqm
Taking output = 3500 sqm
a) Labour
Mate day 0.080 370.00 29.60 L-12
Mazdoor day 2.000 285.00 570.00 L-13
b) Machinery
Mechanical broom @ 1250 sqm per hour hour 2.800 437.00 1223.60 P&M-031
Air compressor 250 cfm hour 2.800 391.40 1095.92 P&M-001
Bitumen pressure distributor @ 1750 sqm per hour hour 2.000 1314.80 2629.60 P&M-004
Water tanker 6 KL capacity @ 1 trip per hour hour 1.000 380.00 380.00 P&M-060
c) Material
Bitumen emulsion (S/S1)@ 0.60 kg per sqm tonne 2.100 68316.00 143463.60 M-077
Cost of water KL 6.000 50.00 300.00 M-189
d) Overhead charges @8% input on (a+b+c) 11975.39
e) Contractor's profit @10% input on (a+b+c+d) 14969.23
Cost for 3500 sqm = a+b+c+d+e 176636.94
Add 0% Vat on emulsion Cost 0.00
Total- 176636.94
Rate per sqm = (a+b+c+d+e)/3500 50.47
say 50.50
Note Bitumen primer has been provided @ 0.60 kg per sqm as per
clause 502.8. Payment shall be made with adjustment, plus or
minus, for the variation between this quantity and the actual
quantity approved by the Engineer after the preliminary trials
referred to in clause No. 502.4.3.
Page 7 of 425
Analysis of Rate
Ref. to
Remarks/ Input
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
ref.
Spec.
1 2 3 4 5 6 7 8 9
5.2 503 Tack Coat
Providing and applying tack coat with bitumen emulsion using
emulsion pressure distributor at the rate of 0.35 kg per sqm on
the prepared bituminous/granular surface cleaned with
mechanical broom.
Unit = sqm
Taking output = 3500 sqm
a) Labour
Mate day 0.080 370.00 29.60 L-12
Mazdoor day 2.000 285.00 570.00 L-13
b) Machinery
Air compressor 250 cfm hour 2.800 391.40 1095.92 P&M-001
Emulsion pressure distributor @ 1750 sqm per hour hour 2.000 1314.80 2629.60 P&M-004
c) Material
Bitumen emulsion (R/S)@ 0.35 kg per sqm tonne 1.225 35382.00 43342.95 M-077
d) Overhead charges @8% input on (a+b+c) 3813.45
e) Contractor's profit @10% input on (a+b+c+d) 4766.81
Cost for 3500 sqm = a+b+c+d+e 56248.32
Add 0% Vat on emulsion Cost 0.00
Total- 56248.32
Rate per sqm = (a+b+c+d+e)/3500 16.07
say 16.10
Note 1. Bitumen emulsion has been provided @ 0.35 kg per sqm as
per clause 503.8. Payment shall be made with adjustment,
plus or minus, for the variation between this quantity and
actual quantity approved by the Engineer after preliminary
trials referred to in clause No. 503.4.3
Page 8 of 425
Analysis of Rate
Ref. to
Remarks/ Input
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
ref.
Spec.
1 2 3 4 5 6 7 8 9
5.6 507 Dense Graded Bituminous Macadam
Providing and laying dense graded bituminous macadam with
100-120 TPH batch type HMP producing an average output of
75 tonnes per hour using crushed aggregates of specified
grading, premixed with bituminous binder @ 4.0 to 4.5 per cent
by weight of total mix and filler, transporting the hot mix to
work site, laying with a hydrostatic paver finisher with sensor
control to the required grade, level and alignment, rolling with
smooth wheeled, vibratory and tandem rollers to achieve the
desired compaction as per MoRTH specification clause No.
507 complete in all respects.
Unit = cum
Taking output = 195 cum (450 tonnes)
a) Labour
Mate day 0.840 370.00 310.80 L-12
Mazdoor working with HMP, mechanical broom, paver, day 14.000 285.00 3990.00 L-13
roller, asphalt cutter and assistance for setting out lines,
levels and layout of construction
Skilled mazdoor for checking line & levels day 5.000 350.00 1750.00 L-15
b) Machinery
Batch mix HMP @ 75 tonne per hour hour 6.000 16967.00 101802.00 P&M-023
Paver finisher hydrostatic with sensor control @ 75 cum hour 6.000 3277.50 19665.00 P&M-034
per hour
Generator 250 KVA hour 6.000 855.00 5130.00 P&M-081
Front end loader 1 cum bucket capacity hour 6.000 988.00 5928.00 P&M-017
Tipper 10 tonne capacity tonne.km 450 x5.50 3.31 8182.35 Lead =input km
Add 10 per cent of cost of carriage to cover cost of loading 818.24 & P&M-058
and unloading
smooth wheeled roller 8-10 tonnes for initial break down hour 6.00x0.65* 564.30 2200.77 P&M-044
rolling.
Vibratory roller 8 tonnes for intermediate rolling. hour 6.00x0.65* 1888.60 7365.54 P&M-059
Finish rolling with 6-8 tonnes smooth wheeled tandem hour 6.00x0.65* 1402.20 5468.58 P&M-045
roller.
c) Materials
Bitumen G-30 @ 4.50 per cent of weight of mix (VG-30) tonne 20.250 38054.00 770593.50 M-074
Aggregate
Total weight of mix = 450 tonnes
Weight of bitumen = 20.25 tonnes
Weight of aggregate = 450 -20.25 = 429.75 tonnes
Taking density of aggregate = 1.5 ton/cum
Volume of aggregate = 287.25 cum
Grading - II25 mm (Nominal Size)
25 - 10 mm 30 per cent cum 86.160 3523.00 303541.68 M-046
10 - 5 mm 28 per cent cum 80.430 3348.00 269279.64 M-040
5 mm and below 40 per cent cum 114.900 3253.00 373769.70 M-030
Filler @ 2 per cent of weight of aggregates. tonne 8.620 3243.00 27954.66 M-188
* Any one of the alternative may be adopted as per approved
design
(ii) For GradingII(25 mm nominal size)
d) Overhead charges @8% input on (a+b+c) 152620.04
e) Contractor's profit @ 10%input on (a+b+c+d) 206037.05
Cost for 205 cum = a+b+c+d+e 2266407.54
Add 0% Vat on bitumen Cost 0.00
Total- 2266407.54
Rate per cum = (a+b+c+d+e)/195 (For Grading-II) 11622.60
say 11623.00
Page 9 of 425
Analysis of Rate
Ref. to
Remarks/ Input
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
ref.
Spec.
1 2 3 4 5 6 7 8 9
Unit = cum
Taking output = 191 cum (450 tonnes)
a) Labour
Mate day 0.840 370.00 310.80 L-12
Mazdoor working with HMP, mechanical broom, paver, day 14.000 285.00 3990.00 L-13
roller, asphalt cutter and assistance for setting out lines,
levels and layout of construction
Skilled mazdoor for checking line & levels day 5.000 350.00 1750.00 L-15
b) Machinery
Batch mix HMP @ 75 tonne per hour hour 6.000 21217.30 127303.80 P&M-022
Paver finisher hydrostatic with sensor control @ 75 cum hour 6.000 3277.50 19665.00 P&M-034
per hour
Generator 250 KVA hour 6.000 855.00 5130.00 P&M-081
Front end loader 1 cum bucket capacity hour 6.000 988.00 5928.00 P&M-017
Tipper 10 tonne capacity tonne.km 450 x5.50 3.31 8182.35 Lead =input km
Add 10 per cent of cost of carriage to cover cost of loading 818.24 & P&M-058
and unloading
Smooth wheeled roller 8-10 tonnes for initial break down hour 6.00x0.65* 564.30 2200.77 P&M-044
rolling.
Vibratory roller 8 tonnes for intermediate rolling. hour 6.00x0.65* 1888.60 7365.54 P&M-059
Finish rolling with 6-8 tonnes smooth wheeled tandem hour 6.00x0.65* 1402.20 5468.58 P&M-045
roller.
c) Material
i) CRMB@ 5 per cent of weight of mix(CRMB) tonne 22.500 40615.00 913837.50 M-074
ii) Aggregate
Total weight of mix = 450 tonnes
Weight of bitumen = 22.5 tonnes
Weight of aggregate = 450 -22.50 = 427.50 tonnes
Taking density of aggregate = 1.5 ton/cum
Volume of aggregate = 285 cum
Grading - II-13 mm (Nominal Size)
13.2 - 10 mm30 per cent cum 85.500 3523.00 301216.50 M-044
10 - 5 mm 25 per cent cum 71.250 3348.00 238545.00 M-040
5 mm and below43 per cent cum 122.550 3253.00 398655.15 M-030
Filler @ 2 per cent of weight of aggregates. tonne 8.620 3243.00 27954.66 M-188
*Any one of the alternative may be adopted as per approved
design
5.8 (ii) for Grading-II(10 mm nominal size)
d) Overhead charges @8% input on (a+b+c) 165465.75
e) Contractor's profit @10% input on (a+b+c+d) 223378.76
Cost for 205 cum = a+b+c+d+e 2457166.40
Add 0% Vat on bitumen Cost 0.00
Total- 2457166.40
Rate per cum = (a+b+c+d+e)/191 (For Grading-II) 12864.75
say 12865.00
Page 10 of 425
Analysis of Rate
Ref. to
Remarks/ Input
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
ref.
Spec.
1 2 3 4 5 6 7 8 9
CHAPTER-9
PIPE CULVERTS
Ref. to
Remarks/ Input
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
ref.
Spec.
9.2 2900 Laying Reinforced Cement Concrete Pipe NP4 / Prestressed
Concrete Pipe on First Class Bedding in Single Row .
Unit = metre
Taking output = 12.5 metres ( 5 pipes of 2.5 m length each )
A 1000 mm dia
a) Labour
Mate day 0.180 370.00 66.60 L-12
Mason day 0.500 480.00 240.00 L-11
Mazdoor day 4.000 285.00 1140.00 L-13
b) Material
Sand at site cum 0.070 3673.00 257.11 M-005
Cement at site tonne 0.050 5000.00 250.00 M-081
RCC pipe NP-4 /prestressed concrete pipe including collar metre 12.500 7326.00 91575.00 M-149
at site
Granular material passing 5.6 mm sieve for bedding cum 4.500 3348.00 15066.00 M-009
c) Overhead charges @ 8% on (a+b) 8687.58
d) Contractor's profit @ 0.1 on (a+b+c) 11728.23
Cost for 12.5 metres = a+b+c+d 129010.52
Rate per metre = (a+b+c+d)/12.5 10320.84
say 10321.00
Cost for 15 cum = a+b+c+d+e 278662.87
Rate per cum = (a+b+c+d+e)/15 18577.52
say 18578.00
Note Vibrator is a part of minor T & P which is already included in
overhead charges of the contractor.
Page 11 of 425
Analysis of Rate
Ref. to
Remarks/ Input
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
ref.
Spec.
1 2 3 4 5 6 7 8 9
Unit = sqm
Taking output = 600 sqm
a) Labour
Mate day 0.030 370.00 11.10 L-12
Mazdoor day 0.750 285.00 213.75 L-13
b) Machinery
Road marking machine @ 60 sqm per hour hour 10.000 114.00 1140.00 P&M-043
Tractor-trolley hour 0.500 444.60 222.30 P&M-053
c) Material
Hot applied thermoplastic compound Litre 1500.000 120.00 180000.00 M-118
Reflectorising glass beads kg 150.000 600.00 90000.00 M-152
d) Overhead charges @8 % on (a+b+c) 21726.97
d) Contractor's profit @ 0.1 on (a+b+c) 29331.41
Cost for 600 sqm = a+b+c+d+e 322645.53
Rate per sqm = a+b+c+d+e)/600 537.74
538.00
say 618.00 SOR LKO
1. A sealing primer may be applied in advance on cement
concrete pavement to ensure proper bonding. Any laitance
Note
and/or curing compound to be removed where paint is required
to be applied on concrete surface.
2.Cost of painter is already included in hire charges of road
marking machine.
Page 12 of 425
Analysis of Rate
Ref. to
Remarks/ Input
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
ref.
Spec.
1 2 3 4 5 6 7 8 9
8.14 804 Kilometre Stone
Reinforced cement concrete M15grade kilometre stone of
standard design as per IRC:8-1980, fixing in position including
painting and printing etc
(i) 5th kilometre stone (precast)
Unit = Nos.
Taking output = 6 Nos.
a) M-15 grade of concrete cum 2.350 6450.00 15157.50 Item 12.8 (A)
47.00 1037.76 Item 13.6 /1000
b) Steel reinforcement @ 5 kg per sqm kg 22.080
c) Excavation in soil for foundation cum 1.680 120.00 201.60 Item No. 3.13
d) Painting two coats on concrete surface sqm 9.850 30.00 295.50 Item 8.8
e) Lettering on km post (average 30 letters of 10 cm per cm per 0.40 720.00 Item 8.3
1800.000
height each) letter
Transportation and fixing
f) Labour
Mate day 0.260 370.00 96.20 L-12
Mason day 0.600 480.00 288.00 L-11
Mazdoor including loading/unloading day 6.000 285.00 1710.00 L-13
g) Machinery
Tractor-trolley hour 6.000 444.60 2667.60 P&M-053
d) Overhead charges @8 % on (a+b+c) 438.54
d) Contractor's profit @ 0.1 on (a+b+c) 592.03
Cost for 6 Nos. 5th km stone = a+b+c+ d+e +f+g+h +i 23204.74
say 3867.00
8.14 (ii) Ordinary kilometer stone (precast)
Unit = Nos.
Taking output = 14 Nos.
a) M-15 grade of concrete cum 3.770 6450.00 24316.50 Item 12.8 (A)
47.00 1237.04 Item 13.6 /1000
b) Steel reinforcement @ 5 kg per sqm kg 26.320
c) Excavation in soil for foundation cum 2.770 120.00 332.40 Item No. 3.13
d) Painting two coats on concrete surface sqm 11.410 30.00 342.30 Item 8.8
e) Lettering on km post ( average 12 letters of 10 cm per cm per 0.40 672.00 Item 8.3
1680.000
height each) letter
Transportation and fixing
f) Labour
Mate day 0.320 370.00 118.40 L-12
Mason day 1.000 480.00 480.00 L-11
Mazdoor day 7.000 285.00 1995.00 L-13
g) Machinery
Tractor-trolley hour 6.000 444.60 2667.60 P&M-053
d) Overhead charges @8 % on (a+b+c) 474.64
d) Contractor's profit @ 0.1 on (a+b+c) 640.76
Cost for 14 Nos. ordinary km stone = (a+b+ c +d+e+f+g+h+i)
33276.64
Page 13 of 425
Analysis of Rate
Ref. to
Remarks/ Input
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
ref.
Spec.
1 2 3 4 5 6 7 8 9
8.14 (iii) Hectometer stone (precast)
Unit = Nos.
Taking output = 33 Nos.
a) M-15 grade of concrete cum 1.580 6450.00 10191.00 Item 12.8 (A)
47.00 3102.00 Item 13.6 /1000
b) Steel reinforcement @ 5 kg per sqm kg 66.000
c) Excavation in soil for foundation cum 1.390 120.00 166.80 Item No. 3.13
d) Painting two coats on concrete surface sqm 6.270 30.00 188.10 Item 8.8
e) Lettering on km post (average 1 letter of 10 cm height per cm per 0.40 132.00 Item 8.3
330.000
each) letter
Transportation and fixing
f) Labour
Mate day 0.340 370.00 125.80 L-12
Mason day 1.500 480.00 720.00 L-11
Mazdoor day 7.000 285.00 1995.00 L-13
g) Machinery
Tractor-trolley hour 6.000 444.60 2667.60 P&M-053
h) Overhead charges @8 % on (a+b+c) 451.23
i) Contractor's profit @ 0.1 on (a+b+c) 609.16
Cost for 33 Nos. Hectometer stone = (a+b +c +d+e+f+ g+h+i)
20348.70
Unit = sqm
Taking output = 0.9 sqm
i) Excavation for foundation cum 0.216 120.00 25.92 Item No. 3.13
ii) Cement concrete M15 grade cum 0.120 6450.00 774.00 Item 12.8 (A)
iii) Painting angle iron post two coats sqm 0.430 30.00 12.90 Item 8.9
a) Labour (For fixing at site)
Mate day 0.010 370.00 3.70 L-12
Mazdoor day 0.200 285.00 57.00 L-13
b) Material
Mild steel angle iron 75 mm x 75 mm x 6 mm,2.85 metres 47.00 893.00 M-179 /1000
kg 19.000
long
Aluminium sheeting fixed with encapsulated lens type 10000.00 9000.00 M-061
sqm 0.900
reflective sheeting of size 0.9 sqm
Add 2 per cent of cost of materials for drilling holes, nuts,
bolts, fabrication etc.
c) Machinery
Tractor-trolley hour 0.020 444.60 8.89 P&M-053
d) Overhead charges @ 0.08 on (a+b+c) 797.01
e) Contractor's profit @ 0.1 on (a+b+c+d) 1075.96
Cost for 0.9 sqm =I+ii+ii+ a+b+c+d+e 12648.38
Rate per sqm (for sign having area upto 0.9 sqm) =
14053.75
(I+ii+iii+a+b+c+d+e)/0.90
say 14054.00
Page 14 of 425
Analysis of Rate
Ref. to
Remarks/ Input
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
ref.
Spec.
1 2 3 4 5 6 7 8 9
I) Lettering and arrow marks on sign board to be provided
Note separately as per actual requirement. Rates for these items
have been analysed separately
ii) Rate for excavation, cement concrete M-15 and painting
may be taken from respective chapters
Page 15 of 425
Analysis of Rate
Ref. to
Remarks/ Input
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
ref.
Spec.
1 2 3 4 5 6 7 8 9
14.1 B RCC Grade M25
Case I Using Concrete Mixer
Unit = 1 cum
Taking output = 15 cum
a) Material
Cement tonne 5.99 5000.00 29950.00 M-081
Coarse sand cum 6.75 3673.00 24792.75 M-005
20 mm Aggregate cum 8.10 4558.00 36919.80 M-053
10 mm Aggregate cum 5.40 3943.00 21292.20 M-051
b) Labour
Mate day 0.86 370.00 318.20 L-12
Mason day 1.50 480.00 720.00 L-11
Mazdoor day 20.00 285.00 5700.00 L-13
c) Machinery
Concrete mixer (cap. 0.40/0.28 cum) hour 6.00 285.00 1710.00 P&M-009
Generator 33 KVA hour 6.00 456.00 2736.00 P&M-079
Basic Cost of Labour, Material & Machinery (a+b+c) for 15 124139.00
cum
For formwork and staging add the following:
14.1B (i) For solid slab super-structure, 20-30 per cent of (a+b+c)
Case I
(p) Height upto 5m
Basic Cost of Labour, Material & Machinery (a+b+c) for 15 124139.00
cum
d) Formwork and staging 20 per cent of (a+b+c) 20.00 24827.80
e) Overhead charges @8 % on (a+b+c) 12273.02
f) Contractor's profit @ 0.1 on (a+b+c) 16568.58
Cost for 15 cum = a+b+c+d+e+f 177808.41
Rate per cum = (a+b+c+d+e+f)/15 11853.89
say 11854.00
Page 16 of 425
Analysis of Rate
Ref. to
Remarks/ Input
Sr No MoRTH Description Unit Quantity Rate Rs Cost Rs
ref.
Spec.
1 2 3 4 5 6 7 8 9
13.10 710.1.4.o Providing and laying of Filter media with granular
f IRC:78 materials/stone crushed aggregates satisfying the
and 2200 requirements laid down in clause 2504.2.2. of MoRTH
specifications to a thickness of not less than 600 mm with
smaller size towards the soil and bigger size towards the wall
and provided over the entire surface behind abutment, wing
wall and return wall to the full height compacted to a firm
condition complete as per drawing and Technical Specification.
Unit = cum
Taking output = 10 cum.
a) Labour
Mate day 0.32 370.00 118.40 L-12
Mazdoor for filling, watering, ramming etc. day 7.00 285.00 1995.00 L-13
Mazdoor (Skilled) day 1.00 350.00 350.00 L-15
b) Material
Filter media of stone aggregate conforming to clause cum 12.00 850.00 10200.00 M-012
2504.2.2. of MoRTH specifications.
c) Machinery
Water Tanker of 6 KL capacity hour 0.06 380.00 22.80 P&M-060
d) Overhead charges @ 0.08 on (a+b+c) 1014.90
e) Contractor's profit @ 0.1 on (a+b+c+d) 1370.11
cost for 10 cum of Fiter Media = a+b+c+d+e 15071.21
Rate per cum = (a+b+c+d+e)/10 1507.12
say 1507.00
Page 17 of 425
SUB-ANALYSIS OF CONCRETE / MORTAR RATE
Referenc
e to
Rate Amount
Sr No MORT&H Description Unit Quantity Remarks/ Input ref.)
(Rs.) (Rs.)
Specificati
on
19.04 PCC Grade M20 Using Batching Plant
Unit = cum
Taking output = 360 Cum
a) Material
Cement tonne 123.84 6200.00 767808.00 M-081
Coarse sand cum 162.000 3460.39 560583.33 M-004
40 mm Aggregate cum 129.600 4225.39 547610.66 M-054
20 mm Aggregate cum 129.600 4325.39 560570.66 M-052
10 mm Aggregate cum 64.800 3735.39 242053.33 M-050
Cost of water (Water/Cement Ratio - 0.4) KL 49.536 50.00 2476.80 M-191
b) Labour
Mate day 0.16 370.00 59.20 L-12
Skilled Mazdoor day 1.00 360.00 360.00 L-15
Mazdoor (Semi Skilled) day 3.00 322.00 966.00 L-13
c) Machinery
Batching Plant of capacity 120 cum/hour hour 4.00 3909.00 15636.00 P&M-19002
Generator 250 KVA hour 4.00 4344.00 17376.00 P&M-22004
Loader 3.1 cum capacity hour 8.679 4076.00 35373.86 P&M-5001
Transit truck agitator
For loading & Unloding time hour 4.000 2299.000 9196.00 P&M-34001
Per Cum Basic Cost of Labour, Material & Machinery (a+b+c)/360 7666.86
Unit = cum
Taking output = 100 cum
a) Labour
Mate day 0.020 370.00 7.40 L-12
Mazdoor day 0.500 330.00 165.00 L-13
b) Machinery
Dozer 80 HP for spreading @ 200 cum per hour hour 0.500 4845.00 2422.50 P&M-014
Motor grader for grading @ 100 cum per hour hour 1.000 4747.00 4747.00 P&M-032
Water tanker6 KL capacity hour 4.000 967.00 3868.00 P&M-060
Vibratory roller 8-10 tonnes @ 100 cum per hour hour 1.000 2440.00 2440.00 P&M-059
c) Material
Cost of water KL 24.000 50.00 1200.00 M-189
Unit = cum
Taking output = 225 cum (450 tonne)
a) Labour
Mate day 0.400 370.00 148.00 L-12
Mazdoor skilled day 2.000 350.00 700.00 L-15
Mazdoor day 8.000 330.00 2640.00 L-13
b) Machinery
Wet Mix plant @ 75 tonne capacity per hour hour 6.000 558.00 3348.00 P&M-032
Electric genertor set 125 KVA hour 6.000 2277.00 13662.00 P&M-059
Water tanker 6 KL capacity 5km lead with one trip per hour hour 4.500 967.00 4351.50 P&M-060
Front end loader 1 cum bucket capacity hour 6.000 1717.00 10302.00
Tipper 10 Tonne t. Km. 450 x 1 11.31 5089.50
Add 10 per cent of cost of carriage to cover cost of 508.95
loading and unloading
Motor Grader 110 HP hour 6.000 4747.00 28482.00
Vibratory 8-10 t. hour 6.000 2440.00 14640.00
c) Material
For close graded Granular sub-base Materials per table 400-1
Earthwork in cutting or in
embankment ordinary soil, excavation
to be in the form or regular pits not
exceeding 0.50m in depth and
earthwork in embankment to be in 20
cm layers, including ramming &
dressing the surface to required levels
and slopes and also including lift up to
1.5 m and lead up to 30 m. The earth
2 cutting to be used in making 1x1 5200.00 4.61 0.30 7191.600 m3
embankment or to be deposited as
spoil banks within 30m distance as
directed by the Engineer - in - charge.
(S.I. No. S.O.R. P.W.D. 253)
Earthwork in cutting or in
embankment ordinary soil, excavation
to be in the form or regular pits not
exceeding 0.50m in depth and
earthwork in embankment to be in 20
cm layers, including ramming &
dressing the surface to required levels
and slopes and also including lift up to
1.5 m and lead up to 30 m. The earth
2 cutting to be used in making 1x1 6300.00 4.61 0.30 8712.900 m3
embankment or to be deposited as
spoil banks within 30m distance as
directed by the Engineer - in - charge.
(S.I. No. S.O.R. P.W.D. 253)
Part-2(Drainage work)
7 Bridge
Part-3(Road Safety)
Center line & edge line road marking with hot applied thermoplasticc compound with reflecting
13 glass beads on bituminous surface as per M.O.R.T. & H. Specification No. 803
Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing
18
in position including painting and printing etc
Sl. No. Item Quantity Unit Rate Amount
a KM Stone
b 5th Km Stone
c HM Stone
Page 2 of 425
Induction, deinduction and erection of plant and equipment
P&M-69001 including all components and accessories for pneumatic hour 9594.00
method of well sinking.
P&M-70001 Jack for Lifting 40 tonne lifting capacity. hour 360.00
P&M-71001 Vibrating Pile driving hammer complete with power unit and a hour 17687.00
P&M-72001 Tipper-18 Cum (Surface Road) excluding OH & CP 275 Per Tonne Km. 5.89
P&M-72002 Tipper-18 Cum (Unsurfaced Gravelled Road) excluding OH 275 Per Tonne Km. 7.160
P&M-72003 Tipper-18 Cum (Katcha Track) excluding OH & CP 275 Per Tonne Km. 14.31
P&M-73001 Tipper -14 Cum (Surface Road) excluding OH & CP 220 Per Tonne Km. 6.68
P&M-73002 Tipper -14 Cum (Unsurfaced Gravelled Road) excluding OH 220 Per Tonne Km. 8.12
P&M-73003 Tipper -14 Cum (Katcha Track) excluding OH & CP 220 Per Tonne Km. 16.24
P&M-74001 Tipper -10 Cum (Surface Road) excluding OH & CP 178 Per Tonne Km. 8.26
P&M-74002 Tipper -10 Cum (Unsurfaced Gravelled Road) excluding OH 178 Per Tonne Km. 10.03
P&M-74003 Tipper -10 Cum (Katcha Track) excluding OH & CP 178 Per Tonne Km. 20.06
P&M-75001 Tipper- 5.5 Cum (Surface Road) excluding OH & CP 90 Per Tonne Km. 11.31
P&M-75002 Tipper- 5.5 Cum (Unsurfaced Gravelled Road) excluding OH 90 Per Tonne Km. 13.75
P&M-75003 Tipper- 5.5 Cum (Katcha Track) excluding OH & CP 90 Per Tonne Km. 27.49
P&M-76001 Transit Mixer - 6 Cum excluding OH & CP Per Tonne Km. 12.77
Loading and unloading of stone boulder / stone aggregates /
P&M-77001 sand / kanker / moorum (Using by 18 cum capacity Tipper Cum 88.41
& 3.1 Cum capacity Loader) excluding OH & CP
Loading and unloading of stone boulder / stone aggregates /
P&M-77002 sand / kanker / moorum (Using by 14 cum capacity Tipper Cum 88.57
& 2.1 Cum
Loading andcapacity Loader)
unloading excluding
of stone boulderOH & CPaggregates /
/ stone
P&M-77003 sand / kanker / moorum (Using by 10 cum capacity Tipper Cum 123.36
& 1.0 Cum capacity Loader) excluding OH & CP
Loading and unloading of stone boulder / stone aggregates /
P&M-77004 sand / kanker / moorum (Using by 5 cum capacity Tipper & Cum 139.06
(B) Labour
Page 3 of 425
L-10 Mason (IInd class) day 450
(C) Materials
M-001 Stone Boulder of size 150 mm and below at Cruser Plant cum
Including
M-002 Supply of quarried stone 150 - 200 mm size for Hand Broken at site cum Carriage - ( L7) -
1 Km.
Including
M-003 Boulder with minimum size of 300 mm for Pitching at Site cum Carriage - ( L7) -
1 Km.
Including
M-004 Coarse sand at Mixing Plant cum 3460.39 Carriage - ( L6) -
1 Km.
Including
M-005 Coarse sand at Site cum 3460.39 Carriage - ( L5) -
1 Km.
Including
M-006 Fine sand at Site cum 900.00 Carriage - ( L5) -
1 Km.
Including
M-007 Moorum at Site cum Carriage - ( L3) -
1 Km.
Page 4 of 425
Including
M-008 Gravel/Quarry spall at Site Cum Carriage - ( L7) -
1 Km.
Including
M-009 Granular Material or hard murrum for GSB works at Site Cum Carriage - ( L3) -
1 Km.
Including
Fly ash conforming to IS: 3812 ( Part II & I) atHMP Plant / Batching Plant /
M-010 Cum Carriage - ( L4) -
Crushing Plant
1 Km.
Including
M-011 Filter media/Filter Material as per Table 300-3 (MoRT&H Specification) at Site Cum Carriage - ( L7) -
1 Km.
Rate at
Plant
Description Unit Rate at Site
(HMP/Batch
ing)
M-012 Close graded Granular sub-base Material 53 mm to 9.5 mm cum 462.15 462.15
M-013 Close graded Granular sub-base Material 37.5 mm to 9.5 mm cum 462.15 462.15
M-014 Close graded Granular sub-base Material 26.5 mm to 9.5 mm cum 463.37 463.37
M-015 Close graded Granular sub-base Material 9.5 mm to 4.75 mm cum 435.11 435.11
M-016 Close graded Granular sub-base Material 9.5 mm to 2.36 mm cum 308.47 308.47
M-017 Close graded Granular sub-base Material 4.75mm to 2.36 mm cum 181.83 181.83
Close graded Granular sub-base Material 4.75mm to 75 micron mm
M-018 cum 181.83 181.83
M-019 Close graded Granular sub-base Material 2.36 mm cum 181.83 181.83
Stone crusher dust finer than 3mm with not more than 10% passing
M-020 cum 181.83 181.83
0.075 sieve.
M-021 Coarse graded Granular sub-base Material 2.36 mm & below cum 181.83 181.83
Coarse graded Granular sub-base Material 4.75mm to 75 micron
M-022 cum 181.83 181.83
mm
M-023 Granular sub-base Material 4.75 mm to 2.36 mm cum 181.83 181.83
M-024 Granular sub-base Material 9.5 mm to 4.75 mm cum 435.11 435.11
M-025 Coarse graded Granular sub-base Material 26.5 mm to 4.75 mm cum 463.37 463.37
M-026 Granular sub-base Material 26.5 mm to 9.5 mm cum 463.37 463.37
M-027 Coarse graded Granular sub-base Material 37.5 mm to 9.5 mm cum 462.15 462.15
M-028 Granular sub-base Material 53 mm to 26 .5mm cum 462.15 462.15
M-029 Aggregates below 5.6 mm cum 181.83 181.83
M-030 Aggregates 22.4 mm to 2.36 mm cum 369.53 369.53
M-031 Aggregates 22.4 mm to 5.6 mm cum 369.53 369.53
M-032 Aggregates 45 mm to 2.8 mm cum 392.07 392.07
M-033 Aggregates 45 mm to 22.4 mm cum 392.07 392.07
M-034 Aggregates 53 mm to 2.8 mm cum 392.07 392.07
M-035 Aggregates 53 mm to 22.4 mm cum 475.66 475.66
M-036 Aggregates 63 mm to 2.8 mm cum 392.07 392.07
M-037 Aggregates 63 mm to 45 mm cum 459.69 459.69
M-038 Aggregates 90 mm to 45 mm cum 459.69 459.69
M-039 Aggregates 10 mm to 5 mm cum 308.47 308.47
M-040 Aggregates 11.2 mm to 0.09 mm cum 308.47 308.47
M-041 Aggregates 13.2 mm to 0.09 mm cum 308.47 308.47
M-042 Aggregates 13.2 mm to 5.6 mm cum 435.11 435.11
M-043 Aggregates 13.2 mm to 10 mm cum 435.11 435.11
Page 5 of 425
M-044 Aggregates 20 mm to 10 mm cum 463.37 463.37
M-045 Aggregates 25 mm to 10 mm cum 463.37 463.37
M-046 Aggregates 19 mm to 6 mm cum 463.37 463.37
M-047 Aggregates 37.5 mm to 19 mm cum 475.66 475.66
M-048 Aggregates 37.5 mm to 25 mm cum 475.66 475.66
M-049 Aggregates 6 mm nominal size cum 435.11 435.11
M-050 Aggregates 10 mm nominal size cum 3735.39 3735.39
M-051 Aggregates 13.2/12.5 mm nominal size cum
M-052 Aggregates 20 mm nominal size cum 4325.39 4325.39
M-053 Aggregates 25 mm nominal size cum 491.63 491.63
M-054 Aggregates 40 mm nominal size cum 4325.39 4325.39
M-055 Crushing of stone aggregates (GSB Crusher Run) cum 586.59 586.59
Page 6 of 425
Including
M-077 Bitumen (emulsion) tonne Carriage - ( L9) -
1 Km.
Including
M-078 Bitumen (modified graded) tonne Carriage - ( L9) -
1 Km.
M-079 Brick each
M-080 C.I.shoes for the pile kg
M-081 Cement tonne 6200.00
M-082 CGI Sheet (0.8 mm thick) kg
M-083 Cold twisted bars (HYSD Bars) tonne 75943.00
M-084 Coller for joints 300 mm dia nos
M-085 Compressible Fibre Board(20mm thick) sqm
M-086 Connectors/ Staples each
M-087 Copper Plate(12m long x 250mmwide) kg
M-088 Corrosion resistant Structural steel tonne 79740.15
M-089 Corrugated sheet, 3 mm thick, "Thrie" beam section railing kg
M-090 Credit for excavated rock found suitable for use cum
M-091 Curing compound liter
M-092 Delineators from ISI certified firm as per the standard drawing given in IRC - 79 each
M-093 Earth Cost slab
Elastomeric or compensation forjoint
seal expansion earthassembly
taken from private landby using
manufactured cum 120.00
M-094 chloroprene, elastomer for elastomeric slab unit conforming to clause 915.1 of metre
M-095 IRC: 83compound
Epoxy (part II), with accessories for preparing epoxy mortar kg
M-096 Epoxy mortar kg
M-097 Epoxy primer kg
M-098 Epoxy resin-hardner mix for prime coat kg
M-099 Flag of red color cloth 600 x 600 mm each
M-100 Flowering Plants each
M-101 Galvanised MS flat clamp nos 200.00
Galvanised steel wire crates of mesh size 100 mm x 100 mm woven with 4mm
M-102 sqm
dia. GI wire in rolls of required size.
M-103 Galvanised structural steel plate 200 mm wide, 6 mm thick, 24 m long kg
M-104 Geo grids sqm
M-105 Geomembrane sqm
M-106 Geonets sqm
M-107 Geotextile sqm
M-108 Geotextile filter fabric sqm
M-109 GI bolt 10 mm Dia nos 20.00
M-110 Grouting pump with agitator hour 95.00
M-111 Grass (Doob) kg
M-112 Grass (Fine) kg
M-113 HDPE pipes 75mm dia metre
M-114 HDPE pipes 90mm dia metre
M-115 Hedge plants each
M-116 Helical pipes 600mm diameter metre
M-117 Hot applied thermoplastic compound litre
Page 7 of 425
Including
M-118 HTS strand tonne 75056.25 Carriage - ( L10)
- 1 Km.
M-119 Joint Sealant Compound kg
M-120 Jute netting, open weave, 2.5 cm square opening for seeding and Mulching sqm
M-121 LDO for steam curing litre
M-122 M.S. Clamps nos
M-123 M.S. Clamps kg
M-124 M.S.shoes @ 35 Kg per pile of 15 m kg
M-125 Mild Steel bars tonne
Modular strip/box seal expansion joint including anchorage catering to a
horizontal movement beyond 70 mm and upto 140mm assembly comprising of
M-126 edge beams, central beam,2 modules chloroprene seal, anchorage elements, metre
support and control system, all steel sections protected against corrosion and
Modular strip/box
installed by seal expansion
the manufacturer or hisjoint cateringrepresentative
authorised to a horizontal movement beyond
140mm and upto 210mm box/box seal joint assembly containing 3 modules/cells
M-127 and comprising of edge beams, two central beams, chloroprene seal, anchorage metre
elements, support and control system, all steel sections protected against
corrosion and installed by the manufacturer or his authorised representative
M-128 Nipples 12mm nos
M-129 Nuts and bolts kg 80.00
M-130 Paint litre 250.00
M-131 Pavement Marking Paint litre
M-132 Paving Fabric sqm
M-133 Perforated geosynthetic pipe 150 mm dia metre
M-134 Perforated pipe of cement concrete, internal dia 100 mm metre
M-135 Pesticide kg
M-136 Pipes 200 mm dia, 2.5 m long for drainage metre
M-137 Plastic sheath, 1.25 mm thick for dowel bars sqm
M-138 Plastic tubes 50 cm dia, 1.2 m high nos
M-139 Polymer braids metre
M-140 Pre moulded Joint filler,25 mm thick for expansion joint. sqm
M-141 Pre-coated stone chips of 13.2 mm nominal size cum
Preformed continuous chloroprene elastomer or closed cell foam sealing element
M-142 with high tear strength, vulcanised in a single operation for the full length of a metre
joint to ensure water tightness.
M-143 Pre-moulded asphalt filler board sqm 100.00
M-144 Pre-packed cement based polymer concrete of strength 45 Mpa at 28 days kg
M-145 Primer kg
M-146 Quick setting compound kg
M-147 Random Rubble Stone cum
M-148 RCC Pipe NP 4 heavy duty non presure pipe 1000 mm dia metre
M-149 RCC Pipe NP 4 heavy duty non presure pipe 1200 mm dia metre
M-150 RCC Pipe NP 4 heavy duty non presure pipe 900 mm dia metre
M-151 RCC Pipe NP 4 heavy duty non presure pipe 600 mm dia metre
M-152 RCC Pipe NP 4 heavy duty non presure pipe 300 mm dia metre
M-153 Reflectorising glass beads kg
Reinforcement strips 60 mm wide 5 mm thick as per clause 3102. (Copper
M-154 metre
Strips)
Reinforcement strips 60 mm wide 5 mm thick as per clause 3102. (Galvanised
M-155 metre
carbon steel strips)
Page 8 of 425
Reinforcement strips 60 mm wide 5 mm thick as per clause 3102. (Glass
M-156 metre
reinforced polymer/fibre reinforced polymer/polymeric strips)
Reinforcement strips 60 mm wide 5 mm thick as per clause 3102. (Stainless
M-157 metre
steel strips)
Reinforcement strips 60 mm wide 5 mm thick as per clause 3102. Aluminium
M-158 metre
strips)
M-159 Rivets each
M-160 Sand bags (Cost of sand and Empty cement bag) nos 5.00
M-161 Sapling 2 m high 25 mm dia each
M-162 Scrap tyres of size 900 x 20 nos
M-163 Seeds kg
M-164 Selected earth cum
M-165 Separation Membrane of impermeable plastic sheeting 125 micron thick sqm
M-166 Sheathing duct metre 94.00
M-167 Shrubs each
M-168 Sludge / Farm yard manure @ 0.18 cum per 100 sqm at site of work for turfing cum
M-169 Sodium vapour lamp each
M-170 Square Rubble Coursed Stone cum
Steel circular hollow pole of standard specification for street lighting to mount
M-171 each
light at 5 m height above deck level
Steel circular hollow pole of standard specification for street lighting to mount
M-172 each
light at 9 m height above road level
M-173 Steel drum 300 mm dia 1.2 m high/empty bitumen drum nos
M-174 Steel helmet and cushion block on top of pile head during driving. kg
M-175 Steel pipe 25 mm external dia as per IS:1239 metre
M-176 Steel pipe 50 mm external dia as per IS:1239 metre
M-177 Steel pipe 100 mm external dia as per IS:1239 metre
M-178 Steel wire rope 20 mm kg
M-179 Steel wire rope 40 mm kg
M-180 Strip seal expansion join metre 2923.00
M-181 Structural Steel tonne 79740.15
M-182 Super plastisizer admixture IS marked as per 9103-1999 kg 100.00
Synthetic Geogrids as per clause 3102.8 and approved design and
M-183 sqm
specifications.
M-184 Through and bond stone each
M-185 Tie rods 20mm diameter nos
M-186 Tiles size 300 x 300 mm and 25 mm thick each
M-187 Timber cum
M-188 Traffic cones with 150 mm reflective sleeve nos
M-189 Tube anchorage set complete with bearing plate, permanent wedges etc nos 1395.00
M-190 Unstaked lime tonne
M-191 Water KL 50.00
M-192 Water based cement paint litre 250.00
M-193 Welded steel wire fabric kg
M-194 Wire mesh 50mm x 50mm size of 3mm wire kg
M-195 Wooden ballies 2" Dia for bracing each 100.00
M-196 Wooden ballies 8" Dia and 9 m long each 1100.00
M-197 Wooden packing cum
M-198 Wooden staff for fastening of flag 25 mm dia, one m long each
Page 9 of 425
M-199 Silica Fume Kg
M-200 Synthetic Geogrid Ultimate tensile strength- 100 kN/m sqm
M-201 Synthetic Geogrid Ultimate tensile strength- 150 kN/m sqm
M-202 Synthetic Geogrid Ultimate tensile strength- 200 kN/m sqm
M-203 Synthetic Geogrid Ultimate tensile strength- 250 kN/m sqm
M-204 Synthetic Geogrid Ultimate tensile strength- 300 kN/m sqm
M-205 Synthetic Geogrid Ultimate tensile strength- 350 kN/m sqm
M-206 Synthetic Geogrid Ultimate tensile strength- 400 kN/m sqm
M-207 Synthetic Geogrid Ultimate tensile strength- 500 kN/m sqm
M-208 Synthetic Geogrid Ultimate tensile strength- 600 kN/m sqm
M-209 Synthetic Geogrid Ultimate tensile strength- 700 kN/m sqm
M-210 Synthetic Geogrid Ultimate tensile strength- 800 kN/m sqm
M-211 Synthetic Geogrid Ultimate tensile strength- 900 kN/m sqm
M-212 Synthetic Geogrid Ultimate tensile strength- 1000 kN/m sqm
M-213 Synthetic Geogrid Ultimate tensile strength- 1100 kN/m sqm
M-214 Synthetic Geogrid Ultimate tensile strength- 1200 kN/m sqm
M-215 Explosives for blasting Kg
M-216 Delay Detonators for Nos.
M-217 Electric Detonators Nos.
M-218 Detonation fuse coil Meter
M-219 3.7 m long extension rod boom Hydraulic Drill Jumbo Nos
M-220 32 mm coupling sleeve boom Hydraulic Drill Jumbo Nos
M-221 Difter rod boom Hydraulic Drill Jumbo Nos
M-222 R32 shank adapter boom Hydraulic Drill Jumbo Nos
M-223 45 mm dia Button Bit boom Hydraulic Drill Jumbo Nos
M-224 51 mm dia button bit boom Hydraulic Drill Jumbo Nos
M-225 Steel Fiber tonne
M-226 Microsilica Kg
M-227 Accelerator Kg
M-228 Wiremesh Kg
M-229 Bamboos Meter
M-230 Live Stake Stump Meter
M-231 Hard wood sticks Nos.
M-232 Live Sods (0.6m Length) Nos.
M-233 Live Sods ( 2m Length) tonne
M-234 Coal Tar Epoxy Kg.
M-235 Binding Material Meter
M-236 Spring post 700 mm each
M-237 Spring post 450 mm each
Water Filled Barricades Work zone sheeting (Trapezoidal Shape 800 mm to
M-238 each
1000 mm in length, 700 mm in height)
M-239 GI Pipe 100 mm Dia Meter
M-240 Bracket for GI pipe fixing Kg
M-241 Flange for GI pipe fixing Kg
M-242 Neem Cake Quintal
Page 10 of 425
M-243 Supplying Sludge cum
M-244 Control Centre Server Nos.
M-245 Hot Standby Backup Server Nos.
M-246 NAS Video Server with storage Minimum 70 TB Nos.
M-247 Backup Video (Only Incidents) Server Nos.
M-248 Graphic Display (70" LED DLP in 3x2 matrix) Set
M-249 Graphic Display Controller and software including Video Switches Set
M-250 CCTV Monitoring Workstation Nos.
M-251 Emergency Telephone (1033) console Nos.
M-252 VIDS- Workstation Nos.
M-253 Administrative Workstation Nos.
M-254 ATMS Operator Workstation Nos.
M-255 CCTV Joystick Nos.
M-256 Operations Laser Printer (Colour) Nos.
M-257 Operations Laser Printer (Black) Nos.
M-258 Rack 19" Nos.
M-259 ATMS Control Room Software (integrated with VIDS, ATCC, VMS, MOS) LS
M-260 Video Management Software with atleast 150 VMS Lic. LS
M-261 Facility Monitoring System Controller Software LS
M-262 Server & Database license LS
M-263 Antivirus license LS
M-264 PTZ Camera (including CCTV Controller) Set
M-265 Solar System with UPS, battery & 12m Pole & Cabinet Set
M-266 VIDS Camera (including Image Processing unit) Set
M-267 Warning amber lights with hooters, 72 Hrs solar backup, 5m poles and foundation Set
M-268 Cabinet Nos.
M-269 12 m Pole (including manufacturing and galvanizing) Nos.
M-270 Solar System with UPS & batteries Set
M-271 Equipment, Sensor unit, Processing unit, Solar power supply and civil works for 4 Set
M-272 Solar System with UPS, batteries Set
M-273 VMS (Variable Message Sign - M type) Nos.
M-274 Gantry (including manufacturing and galvanizing) Nos.
M-275 Solar System with UPS, battery and cabinet for M type VMS Set
M-276 Uninterruptible Power Supply (UPS) For Server Rack (10 KVA) Set
M-277 Uninterruptible Power Supply (UPS) For TMC (30 KVA) Set
M-278 Power Distribution Board (Essential & Critical Supply) Set
M-279 MOS sensor Equipment (including MOS Controller) Set
M-280 Cabinet Nos.
M-281 Pole Nos.
M-282 Steel fence for protection Set
M-283 24 Core Armoured OFC + all accessories Meter
M-284 40 mm PLB HDPE duct as per latest TSEC specifications + all accessories Meter
M-285 Trenching of 1.8 meters, Laying & Backfilling for PLB HDPE duct Meter
M-286 Bi-Axial Extruded GeoGrids of Minimum Tensile Strength 15 kN/m sqm
Page 11 of 425
M-287 Bi-Axial Extruded GeoGrids of Minimum Tensile Strength 20 kN/m sqm
M-288 Bi-Axial Extruded GeoGrids of Minimum Tensile Strength 30 kN/m sqm
M-289 Bi-Axial Extruded GeoGrids of Minimum Tensile Strength 40 kN/m sqm
M-290 Geosynthetic Drainage Composite ( tensile strength of 18 kN/m) sqm
M-291 Geosynthetic Drainage Composite (tensile strength of 13.5 kN/ m) sqm
Page 12 of 425