Professional Documents
Culture Documents
Meen 82
Meen 82
Meen 82
Lab Report 09
Drawing Procedure:
1. Pick part option from new SolidWorks document dialogue box select front plane and
enter sketch mode by picking sketch option.
Figure 1(Initialization)
2. With the Ellipse command from the sketch command manager, to sketch the ellipse and by using
the Smart Dimension to give the dimension according to the given data
4. Hide the extrude of body and change it into 2D form by using the given command.
Figure 5(Offset)
6. To draw the circle, line and give dimension according the data.
7. By using the centerpoint arc, draw the arc which meet with the one point of line and draw the
arc having radius 5mm on the other end point of line and arc which draw by centerpoint arc,
which meet with the offset ellipse.
8. By using the Trim Entities Command, trim the extra lines and mirror the sketch by using the
Mirror Entities Command from the Sketch Command Manager.
10. Sketch which we want to cut in circular. Draw the 4mm line with radius 27mm from the center of
circle.
Figure 10(Sketch)
11. Cut the all sketched pattern by using the Extrude Cut Command from the Features Command
Manager.
12. To draw the same pattern, by using the Circular Pattern Command draw the 8 pattern.
Lab Report 10
Procedure:
MD & CAD-1
10
Practice Drawing:
Figure: 1
MD & CAD-1
11
Figure:2
Figure:3
MD & CAD-1
12
MD & CAD-1
13
LAB REPORT 11
Figure: 1
Figure: 2
Figure: 3
Figure: 4
Figure: 5
Figure: 6
Figure: 7
Figure: 8
LAB REPORT 12
Drawing Practice
Figure: 1
Figure: 2
Figure: 3
Figure: 4
Figure: 5
Figure: 6
Figure: 7
Figure: 9
Figure: 10