Professional Documents
Culture Documents
Apollo Plus Series Manual
Apollo Plus Series Manual
Apollo Plus Series Manual
1 USER NOTES 6
2 SAFETY NOTES 6
4 ACCESSORIES 9
5 GETTING STARTED 13
5.2 Before Using Your Apollo+ Series for the First Time 14
7.5 Main Menu Window - Automatic Test Sequence Editor (PAT Edit) 35
7.6 Main Menu Window – Time and Date Setup 37
12 TEST FUNCTIONS 55
14.1 Health & Safety Reports - Emergency Lighting Report (Apollo 600+ Only) 69
14.2 Health & Safety Reports - Fire Alarm Report (Apollo 600+ Only) 70
16 ELECTRICAL SPECIFICATION 73
17 USEFUL INFORMATION 75
18 ENVIRONMENTAL CONDITIONS 78
19 MAINTENANCE 78
21 ONLINE RESOURCES 80
The battery pack will be charged whenever the Apollo+ Series is connected to the Mains Supply regardless of whether
the instrument is switched ON or OFF.
The typical charging current is set to 500mA but this may vary as the instrument also includes precharge and top up
charge modes.
When no tests are being performed the battery pack should be fully recharged after 7 hours.
Before opening the Apollo+ Series battery compartment ensure that all test leads and accessories are
disconnected.
12.1.1 Selecting a Test Type
12.2.1 Selecting a Test Type
Equipment Under Test (EUT)
Ω
Ω Ω
Ω Ω
Ω
Ω Ω
Ω Ω
Ω
Ω Ω
Ω Ω
Ω Ω
Ω Ω
Ω