Professional Documents
Culture Documents
Electronic Sensors QP BP
Electronic Sensors QP BP
Electronic Sensors QP BP
(Chowdharyguda(V),Ghatkesar (M),Medchal-Malkajgiri(D),500088)
Blooms Course
S.NO. Questions Marks
Level Outcomes
1 Explain about classification of sensors 5 L2 CO1
OR
Discuss about Spectroscopic Thermometry and Noise 5
2 L2 CO2
Thermometry
OR
2 Describe about NQR Thermometry L2 CO2
5
OR
4 Explain about Semiconductor Magneto resistance 5 L2 CO2
PRINCETON INSTITUTE OF ENGINEERING AND TECHNOLOGY FOR WOMEN
Chowdharyguda(V),Ghatkesar (M),Medchal-Malkajgiri(D),500088
Department: CSM, CSD, CSC Subject:ES Semester: B.Tech IV Year(Sem-1)
SET-1 Name: Hallticket No.:
Answer All Questions. All Questions Carry Equal Marks. Time: 20 Min. Marks: 10.
PART 1: CHOOSE THE CORRECT ANSWER.
BT
S.No QUESTION CO’S
LEVEL
The difference between the measured value and the true value is called ( )
a) Relative error
b) Absolute error
3 L2 CO1
c) Probable error
d) Gross error
S.NO BT
QUESTION CO’S
. LEVEL
___________________________ sensor is linear and low accuracy
1. L1 CO1
When a force is applied to _________________crystals, they produce an
2. L2 CO1
output voltage.
Commonly used thermoelectric transducer is __________
3. L1 CO2
Remote sensing techniques make use of the properties of
_____________________emitted, reflected or diffracted by the sensed
4. L2 CO2
objects
Strain gauges are used to measure__________
5. L2 CO2
6. The ratio of incremental output to incremental input is L1 CO1
called____________
Ultrasonic sound wave range is___________
7. L1 CO2
__________is the minimum temperature of nuclear thermometer.
8. L1 CO2
Three types of effects are in thermoemf sensors
9. are_____________,______________&______________ L2 CO2
Answer All Questions. All Questions Carry Equal Marks. Time: 20 Min. Marks: 10.
PART 1: CHOOSE THE CORRECT ANSWER.
S. BT
QUESTION CO’S
NO LEVEL
Which type of material can be sensed by inductive sensor? ( )
a) Wooden type
b) Metallic type
1 L1 CO2
c) Plastic type
d) Glass type
The difference between the measured value and the true value is called ( )
a) Relative error
b) Absolute error
8 L2 CO1
c) Probable error
d) Gross error
BT
S.NO. QUESTION CO’S
LEVEL
The ratio of incremental output to incremental input is
11. called____________ L1 CO1
Answer All Questions. All Questions Carry Equal Marks. Time: 20 Min. Marks: 10.
PART 1: CHOOSE THE CORRECT ANSWER.
BT
S.NO. QUESTION CO’S
LEVEL
The difference between the measured value and the true value is called ( )
a) Relative error
b) Absolute error
1 L2 CO1
c) Probable error
d) Gross error
S.N BT
O. QUESTION LEVEL CO’S
Commonly used thermoelectric transducer is __________
1. L1 CO2
Remote sensing techniques make use of the properties of
_____________________emitted, reflected or diffracted by the sensed
objects
2. L2 CO2
Strain gauges are used to measure__________
3. L2 CO2
4. Three types of effects are in thermoemf sensors L2 CO2
are_____________,______________&______________
RTD is a type of _____________sensor.
5. L1 CO2
___________________________ sensor is linear and low accuracy
6. L1 CO1
When a force is applied to _________________crystals, they produce an
7. output voltage. L2 CO1
The ratio of incremental output to incremental input is
called____________
8. L1 CO1
Ultrasonic sound wave range is___________
9. L1 CO2
__________is the minimum temperature of nuclear thermometer.
10. L1 CO2
Answer All Questions. All Questions Carry Equal Marks. Time: 20 Min. Marks: 10.
PART 1: CHOOSE THE CORRECT ANSWER.
BT
S.NO. QUESTION CO’S
LEVEL
Sound to electrical energy transducer is called---- ( )
a) Microphone
b) AFR
1 L2 CO1
c) Tactile sensor
d) Pellistor
The difference between the measured value and the true value is called ( )
a) Relative error
b) Absolute error
2 L2 CO1
c) Probable error
d) Gross error
The difference between the measured value and the true value is called ( )
a) Relative error
b) Absolute error
7 L2 CO1
c) Probable error
d) Gross error
BT
S.NO. QUESTION CO’S
LEVEL
Strain gauges are used to measure__________
1. L2 CO2