This solid state Tesla coil drive board can be used for entertainment, film effects, education and experiments. It produces a 10cm arc powered by a 12V adapter. The pulse width and frequency can be adjusted independently or controlled by music. A toggle switch selects modes and lights indicate power and arc status. It uses magnetic feedback to automatically adjust the secondary coil frequency between 200-800kHz. The primary coil should be at least 7uh and the board supports up to 240VAC input power.
This solid state Tesla coil drive board can be used for entertainment, film effects, education and experiments. It produces a 10cm arc powered by a 12V adapter. The pulse width and frequency can be adjusted independently or controlled by music. A toggle switch selects modes and lights indicate power and arc status. It uses magnetic feedback to automatically adjust the secondary coil frequency between 200-800kHz. The primary coil should be at least 7uh and the board supports up to 240VAC input power.
This solid state Tesla coil drive board can be used for entertainment, film effects, education and experiments. It produces a 10cm arc powered by a 12V adapter. The pulse width and frequency can be adjusted independently or controlled by music. A toggle switch selects modes and lights indicate power and arc status. It uses magnetic feedback to automatically adjust the secondary coil frequency between 200-800kHz. The primary coil should be at least 7uh and the board supports up to 240VAC input power.
This solid state Tesla coil drive board can be used for entertainment, film effects, education and experiments. It produces a 10cm arc powered by a 12V adapter. The pulse width and frequency can be adjusted independently or controlled by music. A toggle switch selects modes and lights indicate power and arc status. It uses magnetic feedback to automatically adjust the secondary coil frequency between 200-800kHz. The primary coil should be at least 7uh and the board supports up to 240VAC input power.
SSTC Solid State Tesla Coil Half-bridge Integrated Driver Board Educational Toy
Features:
.Wide Range of Applications: entertainment interaction, film and television special
effects, popular science education, teaching demonstrations, etc. .It is a smart device for wireless transmission experiments. Small sstc drive board, integrated design and integrated half-bridge + arc extinguishing + drive, convenient wiring .This drive board can produce an arc of about 10cm. The drive power supply adopts a dc12v power adapter, a standard dc2.1 power interface, and the pulse width and frequency can be independent .Only the pulse width is adjustable in the music mode, and the frequency is controlled by the music frequency. Supports square wave music playback .Using the lotus seat to input audio signal, the mode switching adopts a toggle switch, and there are two on-board indicator lights to indicate power and arc extinguishing signals. .The magnetic loop feedbacks the ground wire of the secondary coil and automatically chases the frequency. It is recommended to use the secondary frequency between 200k-800k .The inductance of the primary coil is recommended to be at least about 7uh, and the power half-bridge part supports up to 240vac input