WATER-BASED
RUST VETO 2212-B
Synthetic-Type Rust Inhibitor
RECOMMENDED USES
Indoor protection, between processes, hydrostatic
testing, final stage of washers. NO OIL AND NITRITES.
For use on all metals. It is recommended for use at 3-
5% concentration. Excellent for the protection of cast
aluminum.
Protection Indoors - 1 month
Film Thickness (inches/mil) Varies with conc.
Type of Film Thin, dry film
Drying Time 15 minutes with heat
Flash Point Not applicable
Application Method Dip or Spray
Type of Protection Humidity
Average Coverage Varies with conc.
Removal Mild alkaline cleaner
Voc .69 Ibs./gal.NON-SOLVENT
RUST VETO 210-C
RECOMMENDED USES
Fast water displacement and separation (not
typically offered in a slushing oil) are provided with
Rust Veto 210-C. Use as a light slushing oil for wire,
tubing, sheet stock, and as a general purpose light oil
preservative.
Protection Indoors - 12 months
Film Thickness (inches/mm) (0.00026 /0.26)
Type of Film cs Thin, oily, transparent
Drying Time N.A.
Flash Point 260°F
Application Method Dip or Spray
Type of Protection Humidity shipping or
storage
Average Coverage 4500 sq. ft./gal.
Removal Petroleum Solvent or
mild Alkaline cleaner
VOC 6.4 Ibs./gal.