Professional Documents
Culture Documents
HW 9
HW 9
Nimilpruwadon
Siradanai
Section………………ID………………… No. in class…………..
4 6510502399
1. What is the “glass transition temperature (Tg)” of polymer and why is this temperature so
important ?
Glass Temperature (Tg): the temp. range below which the amorphous polymer assumes
a rigid glassy structure
2. Write the repeating unit, type of structure, type of polymerization and at least three market
applications for each of these polymers.
Type of
Structure
Polymer polymerization
Repeating unit (Semicrystalline/ Applications
type (Addition/
Amorphous)
Condensation)
Example 1. Agricultural Film
Polyethylene Semicrystalline Addition 2. Cable Covering
(PE) 3. Bags/Containers
·
Polyamide
(Nylon) condensatio
-
·
Polyisoprene condensatio
Polystyrene
(PS)
1
Name…………………………………………………….
Nimilpramado
Siradanai
Section………………ID………………… No. in class…………..
& 6510502399
3. Name the polymer listed in the table below, that would be best suited for use as containers
(cup) to contain hot coffee. Why?
4. The stress-strain plot shows mechanical behaviors of thermosetting polymer (A), thermoplastic
(B), and elastomer (C). List two important characteristics of A, B, and C.
The stress-strain behavior for thermosetting polymer (A), thermoplastic (B), and elastomer (C).
ะห
A อะ เปราะ และ
* Gaur Ductile
1 . Ductile
2
ยิ
Name…………………………………………………….
Nimilpramado
Siradanai
Section………………ID………………… No. in class…………..
& 6510502399
5. What factors are affected by the degree of crystallinity of polymer and how?
strength, stiffress, Toughness, optical Clarify, Barrier Properties
7. Give the name, type, and recyclability of polymer, including the manufacturing process of water
bottle named น้ำดื่มเกษตร KU Inspiration.
strain - induced -
process by Crystalin