Professional Documents
Culture Documents
ES Model W-M115-3
ES Model W-M115-3
ES Model W-M115-3
Series W-M115
Ductile Iron Pressure Reducing Valve
Size : Thread DN32-DN50 Flange DN50-DN300
The Watts W-M115 Pressure Reducing Valve is designed to
adjust, set and maintain downstream pressure of the pipeline. It’s
generally used in city water supply, industrial and agricultural
water transmission pipeline, etc.
Features
• Stable performance, safe and reliable
• Simple operation, convenient adjusting Specification
• Precise pressure reducing
• Long service life • Design Standard:AWWA C530
• Working Medium: water • Connection Type: Thread & Flanged is available
W-M115-BSPT CL 300 BSPT to BS21
Pressure - Temperature W-M115-Flange to PN16 to BS EN 1092-2 &
CL150 to ANSI B16.42 & CL300 to ANSI B16.42
• Nominal Pressure: PN16/CL150/CL300 • Test Standard: ISO/DIS 5208:2007
• Temperature Range: 0°C ~ 80°C • Pressure Reducing Range:
• Float Valve Working Pressure: 116Psi (8Bar) Standard: LF26A--10Psi~125Psi
• Minimum Different Pressure: 5Psi(0.035MPa) (0.07MPa~0.9MPa)(Pilot valve)
Optional : LF263AP--20Psi~175Psi(0.137Mpa~1.2Mpa)
Test Pressures LFCP15--30Psi~300Psi(0.206Mpa~2.06Mpa)
• Pressure Gauge: 0-350Psi
Class Pneumatic Hydraulic • Standard Pressure Setting: 50Psi (0.35MPa)
Shell: 24 bar
PN16 Seat: 7 bar
Seat: 17.6 bar Approval
CL150 Seat: 7 bar Shell: 25.2 bar
CL300 Seat: 7 bar Shell: 40 bar
Material
NO. Component Material Mustang Series Main Valve
1 Cover Ductile Iron+Epoxy Coated
1
2 Cover Bearing Stainless Steel 12
2
3 Shaft/Stem Stainless Steel 13
3
4 Stud Zinc Plated Steel/Stainless Steel 4 14
5 Cover Nut Zinc Plated Steel/Stainless Steel 5 15
6 Washer Zinc Plated Steel/Stainless Steel 6 16
7 Diaphragm Buna N(Nitrile)+Nylon 7 17
8 Spring Stainless Steel 8 18
9 Disc Retainer Ductile Iron+Epoxy Coated 9
19
10 Seat Disc Buna-N(Nitrile) 10
20
11 Body Ductile Iron+Epoxy Coated
12 Plug Brass/Zinc Plated Steel 11
11
Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without
incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
Page 1 / 2
W-M115-EN-202212
Installation Dimensions
Connection Dimension: PN16 to BS EN 1092-2
Flow Rates
Size (DN) 32 40 50 65 80 100 150 200 250 300
Maximum Continuous (GPM) 95 130 210 300 485 800 1850 3100 5000 7000
Maximum Intermittent (GPM) 119 161 265 390 590 1000 2300 4000 6250 8725
Minimum Continuous (GPM) 1 1 1 20 30 50 115 200 300 400
CV Factor GPM (Globe) 25 30 45 75 100 175 490 770 1200 1750
Characteristic Curves
Full Port Series Reduce Port Series
3
.5/
/4
2 /2
/2
2/ 2
1-1
1-1
2-1
10
12
16
10
12
4
6
8
3
6
8
100 100
80 80
60 60
40 40
30 30
Pressure Drop(p.s.i.)
Pressure Drop(p.s.i.)
20 20
10 10
8 8
6 6
4 4
3 3
2 2
2 4 6 8 10 20 40 60 80 100 200 500 1000 2000 5000 10000 20000 2 4 6 8 10 20 40 60 80100 200 500 1000 2000 500010000 20000
100,000 100,000
Flow Rate-Gallons per minute(Water) Flow Rate-Gallons per minute(Water)
After selecting the valve size, locate inlet and outlet pressure 380.00
360.00
on this chart. If the intersection point falls in the shaded area, 340.00
cavitation can occur. Operation of valves continually in the 320.00
Inlet Pressure . PSIG
Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without
incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
Page 2 / 2