Professional Documents
Culture Documents
Body Builder - LR 2015 - Diagrams
Body Builder - LR 2015 - Diagrams
Introduction
This information contains details for the Chassis Diagrams for US2015 MACK vehicles.
Before working on a MACK vehicle, please read the following.
Note: The information in this manual does not include each and every unique situation that
you may encounter when working on MACK vehicles. MACK Trucks, Inc. cannot possibly
know, evaluate, or advise a person on all the types of work that can be done on MACK
vehicles, all the appropriate ways to do such work, and all the possible consequences of
performing such work in a certain manner. Therefore any situations and/or methods of
working on a MACK vehicle that are not addressed in this manual are not necessarily
approved by MACK. IN THE EVENT THAT YOU ENCOUNTER A SITUATION NOT
ADDRESSED IN THIS MANUAL, PLEASE CONTACT MACK BODY BUILDER SUPPORT
AT 877–770–7575.
Unless stated otherwise, following a recommendation listed in this manual does not
automatically guarantee compliance with applicable government regulations. Compliance
with applicable government regulations is your responsibility as the party making the
additions/modifications.
Please be advised that the MACK Trucks, Inc. vehicle warranty does not apply to any
MACK vehicle that has been modified in any way, which in MACK's judgment might affect
the vehicles stability or reliability.
The information, specifications, and illustrations in this manual are based on information
that was current at the time of publication. Note that some illustrations are typical and may
not reflect the exact arrangement of every component installed on a specific vehicle.
No part of this publication may be reproduced, stored in a retrieval system, or be
transmitted in any form by any means including (but not limited to) electronic, mechanical,
photocopying, recording, or otherwise without written permission of MACK Trucks, Inc.
Contents:
• “Cab Tilt Angle and Height”, page 2
PV776-89226272 USA73615
Mack Trucks, Inc. Date Group No. Release Page
Service Bulletin 11.2015 900 519 1 2(5)
W8108090
Dimension #1 — Max Height from Dimension #2 – Cab Height from Dimension #3 — Cab Tilt Angle
Frame Rail During Tilt Frame Rail
77.3 in (1964 mm) 56.11 in (1476 mm) 58°
Mack Trucks, Inc. Date Group No. Release Page
Service Bulletin 11.2015 900 519 1 3(5)
W8104649
W8094254
W2107950
Note: The Gross Axle Weight Rating (GAWR) depends upon various factors such as the axle weight rating, tire and rim rat-
ings, suspension rating, etc., and is determined by the lowest rated component of the axle system. The Gross Vehicle Weight
Rating (GVWR) is (usually, but not necessarily) the sum of the GAWRs. The GVWR could be limited by the frame or
transmission.
Mack Trucks, Inc. Date Group No. Release Page
Service Bulletin 11.2015 900 519 1 5(5)
W8107268
Tank Configurations