Download as pdf
Download as pdf
You are on page 1of 4
“"Ch. IH. Component Parts of Conveying Machines The internal specific pressure’ in the eye can be obtained for. the wrap angle of the eye 2a (Fig. 24a) and the maximum theoretical folal force Sincor (static plus dynamnie) trom the following. equa: ion: 7 " Streor Parsing * (68) If 2¢= 180° (Fig. 246), then : Pi == Spear (70) Substituting in equation (68) oma by the permissible stress R’, we obtain : cs Rete" rary a. ay The allowable stress for link-plates is usually taken as RZ «1000 to 1200 ke/em?, The dimensions of the link-plate in’ the eye section mm can be <, alculated for tensile strength with decreased stress according to ‘formula Stneor = 20 (b — A) Rey (72) whence, 5S, o = olige +A. (73) Hence, the stress in section mm is om yet Re (74) The allowable tensile stress R, in equations (72) to (74) may range to froin 600 to 750 kg/em?. Since the eyes of the inner link-plates are larger than those of the outer, compressive stress is most critical for the outer [sce — equation (69)] and tensile stress for the’ inner 'link-plates [see equation (71) or (74)]. . In offset-link bush chains the section of the link-plates (see Fig. 18) should be calculated to withstand the sum of the tensile and bending stresses acting upon it, Roughly these may be esti- mated as Streor 4 OSeneortt Si . 6 0, -+ 0, = Stlepe + SSuaeort 3.5 Sueor

You might also like