Professional Documents
Culture Documents
One Way Slabs
One Way Slabs
com
For Slab: S1
Live Load (LL) 4.80 kn/m² Ultimate Load "Wu" 13.662 kn/m²
Dead Load (DL) 3.93 kn/m² for 1-meter-strip "Wu" 13.662 kn/m²
Negative Moment at Supports 3.290 kn.m Positive Moment at Midspan 2.820 kn.m
STEEL REINFORCEMENT
At supports At midspan
d 75 mm d 75 mm
R 0.650 R 0.557
ρ 0.0024 ρ 0.0021
ρmin 0.0051 ρmin 0.0051
Required Steel Area "As" 381.82 mm² Required Steel Area "As" 381.82 mm²
bar diameter 10 mm bar diameter 10 mm
spacing of bars 205.60 mm spacing of bars 205.60 mm
say 205.00 mm say 205.00 mm
Therefore, Use 10mmØ @ S=205.00 mm Therefore, Use 10mmØ @ S=205.00 mm
Temperature Bars Checking of Spacing of Main & Temp. Bars
d 100 mm For main bars at supports & midspan:
b 1000 mm Smax=3h 300 mm
ρ 0.0020 or 450 mm
Required Steel Area "Ast" 200 mm² For temperature bars:
bar diameter 10 mm Stmax=5t 500 mm
spacing of temp.bars 392.5 mm or 450 mm
Therefore, Use 10mmØ @ S=390.00 mm Remarks recheck!
This computer program is exclusively developed by Engr. Jon Ray G. Patangan, PRC License No. 0099594. The
Programmer shall not claim responsibilty for any structural failure that may result from unauthorized use of this program.
JGP Designs john_jek23@yahoo.com
For Slab: S1
h=100mm
This computer program is exclusively developed by Engr. Jon Ray G. Patangan, PRC License No. 0099594. The
Programmer shall not claim responsibilty for any structural failure that may result from unauthorized use of this program.