YnlensEl(* 2 #ri2(F
AtRaa
ORS MMM ERT, SUATIEMAMRM!
SERIE hE ORARA SSR Zane.
eRFeRSRNAABESt.
CKREGAM, AREF AITLMMMEN, ORGRE RTA
AMA KR GH FO OOO IS RR
setvice@hiyongnuo.com 4750.
G Bane
18a
2B
2 erelamamusoiniee
SCRAPES CCPH REM 0c)
REERAGE Bo Jvn neyongnuo com HEROS A,
BRP R
SUF WAYRDLYNBSIm F188 DF DSM IE.
1 See, FMEA RRR,
SRA MASI LAT, SMATRE TER
RRS!
ge
USB IRS IEHEDI EE
SUSSRIENN, HA Ra RTM:
ARUBA.
3.
SERED, ACRES, BERRA.
SOREN, HABLA “Bae NE
RB.
DEAT FREOOAHRRE,
4k ER SER
G.WiFF RR SUSBHOTE, BRTIENL.
7 AAEM RIM BOLO, RMR ATT
mA.Ynlens Firmware Upgrade Guide
Z\ Precautions
|® Make sure the lens is removed from the camera before updating
ttherwize the camera or lens may be damaged”
uring the upgrace please con” ‘icone the lens ane compster.
During the upgrace please con’ close the update software
1 tf opgrade ale, piesse try t update again nceoraing tothe operating
steps below.I'the upgrade aed again, please eal 102 00"ass or wie
temallto senicachanossnvo com forhelp
i Preparation
Leompuer
Lento be updated
ZaUsBeabethatean ansmit data
‘Dowload the upgrae le and nap Fle etencon ete)
Please st webs te ap unm Figongauo comic t downoad the
Tastestupgrce ie
Operation
‘The following operation takes "YN85mm FL.R DF DSM" as an example
L turn off the camera and take the lens down from the camera
Make sure the lens is removed from the camera before
updating, otherwise the camera or lens may be damaged!
3. connect the lens to the computer with USB cable.
When the lens is connected normally, the upgrade interface
will display lens information at
reconnectit
“Device Infor” . Ifnot, please
5. during the upgrade, the interface will display the update
progress bar. Please wait for the completion of firmware
Uperade,
When the firmware upgrade is completed, the upgarde
interface will display “updated successfully”
2. double-click to open the downloaded upgrade file.
4.. click [Start] to update the firmware.
=
Diconnect the lens and USB cable, and use the lens
with camera again.
‘T.after the firmware update is complete, turn off the
‘camera and remove the battery for least ten seconds,
Then reinsert the battery and reboot the camera,