Professional Documents
Culture Documents
Circular Manufacturing
Circular Manufacturing
Manufacturing:
GetInnovative4Impact Concept , Trends and
Research practices at NED
Manufacturing
Dr Anis Fatima
Associate professor
NED UET, Karachi, Pakistan
Circular Economy Vs Circular Manufacturing
GetInnovative4Impact
• A driver for sustainable development of the manufacturing sector.
➢Circular Design
➢ Disassembly
➢ Remanufacture
➢ Recycle
➢ Reuse
➢ Waste Management
➢ Industrial Symbiosis
➢ Closed-Loop Supply Chain and Reverse
Logistics
➢ Servitization
➢ Resource Efficiency and Cleaner Production
GetInnovative4Impact
NED Research related to Circular Manufacturing
Fatima A. and Mativenga P. T. Performance of flank face structured cutting tools in machining of AISI/SAE 4140
over a range of cutting speeds.
GetInnovative4Impact
NED Research related to Circular Manufacturing
Fatima A. and Amir I. Identifying direct electrical energy demand in wire-cut
GetInnovative4Impact
NED Research related to Circular Manufacturing
GetInnovative4Impact
NED Research related to Circular Manufacturing
Anis Fatima, Muhammad Wasif and Muhammad Omer Mumtaz, Optimization of process parameters in turning
of nuclear graded steel alloy (AISI-410) for sustainable manufacture
Levels Factors
Feed Depth of
Cutting rate, cut,
Speed, Environmen
Run
Vc f ap t
(m/min) (mm/r
ev) (mm)
1 50 0.1 0.4 dry
2 50 0.2 0.8 wet
3 50 0.3 1.2 mql
4 90 0.1 0.8 mql
5 90 0.2 1.2 dry
6 90 0.3 0.4 wet
7 125 0.1 1.2 wet
8 125 0.2 0.4 mql
9 125 0.3 0.8 dry
Contribution
Source P value
(%)
Cutting Speed 0.659 2.703
Feed Rate 0.054 91.599
Depth of Cut 0.918 0.468
Environment 0.082 5.227
GetInnovative4Impact
NED Research related to Circular Manufacturing
Mehreen Kausar, Azam Syed Mehmood Hasan and Sheheryar Mohsin Qureshi Exploring the critical success
factors of a resilient supply chain.
GetInnovative4Impact
NED Research related to Circular Manufacturing
Mehreen Kausar, Azam Syed Mehmood Hasan and Shehryar Mohsin Qureshi ,Exploring the critical success
factors of a resilient supply chain.
GetInnovative4Impact
Teaching at NED with reference to CM
• Graduate
✓ Advance Sustainable Manufacturing
✓ Circular Manufacturing
✓ Green Supply Chain Management
✓ Agile & Lean Manufacturing
✓ Sustainable Design For Manufacturing
• Undergraduate
✓ Sustainable technologies
✓ Engineering economics
• Certification Courses
✓ Sustainability - Economics, Tools, Management
✓ Sustainable Waste Management
✓ Sustainable Corporate Management
✓ PGD In Sustainable engineering
GetInnovative4Impact
Industrial linkage with reference to Circular Manufacturing
• Recycle
✓ Fabrication of paper recycling plant – Indus Motor company
• Waste Management
✓ Waste Minimization and Productivity Enhancement in Apparel Manufacturing - Artistic Milliners
✓ Application of Lean manufacturing - Amreli Steels Limited
✓ Reduction of Time to Market in Supply Chain - (J.)
• Circular Design
✓ AI tool path for Mold design – SUPARCO
✓ Designing Of Smart and sustainable HVAC System for Residential/Commercial Use - MM Engineering/AMCO
industries
GetInnovative4Impact
References
• Anis Fatima, Muhammad Wasif and Muhammad Omer Mumtaz, Optimization of process parameters in
turning of nuclear graded steel alloy (AISI-410) for sustainable manufacture " has been accepted for
publication in the Journal of Engineering Research (JER). The DOI number for this paper will be:
10.36909/10.36909/jer.11239
• Fatima A. and Amir I. Identifying direct electrical energy demand in wire-cut EDM Mehran University research
journal https://doi.org/10.22581/muet1982.2001.16
• Fatima A. and Mativenga P. T. Performance of flank face structured cutting tools in machining of AISI/SAE
4140 over a range of cutting speeds. Proceedings of the Institution of Mechanical Engineers, Part B: Journal
of Engineering Manufacture,2016 vol. 230 (1): 3-18
• Azam, Mehreen Kausar, Syed Mehmood Hasan, and Sheheryar Mohsin Qureshi. "Exploring the critical
success factors of a resilient supply chain." Engineering Management in Production and Services 15.1
(2022): 41-56.
• Acerbi, F.; Sassanelli, C.; Terzi, S.; Taisch, M. A Systematic Literature Review on Data and Information
Required for Circular Manufacturing Strategies Adoption. Sustainability 2021, 13, 2047.
https://doi.org/10.3390/su13042047
GetInnovative4Impact
Thank you
GetInnovative4Impact